Azure IoT
Microsoft Azure IoTHub client libraries
Dependents: sht15_remote_monitoring RobotArmDemo iothub_client_sample_amqp f767zi_mqtt ... more
This library implements the Microsoft Azure IoTHub client library. The code is replicated from https://github.com/Azure/azure-iot-sdks
Diff: iothub_device_client_ll.h
- Revision:
- 91:bbf806070c5f
- Parent:
- 88:248736be106e
- Child:
- 92:97148cf9aa2a
--- a/iothub_device_client_ll.h Thu Jun 28 10:07:22 2018 -0700
+++ b/iothub_device_client_ll.h Thu Jul 12 18:09:13 2018 -0700
@@ -2,22 +2,22 @@
// Licensed under the MIT license. See LICENSE file in the project root for full license information.
/** @file iothub_client_ll.h
-* @brief APIs that allow a user (usually a device) to communicate
-* with an Azure IoTHub.
+* @brief APIs that allow a user (usually a device) to communicate
+* with an Azure IoTHub.
*
-* @details IoTHubDeviceClient_LL is a module that allows a user (usually a
-* device) to communicate with an Azure IoTHub. It can send events
-* and receive messages. At any given moment in time there can only
-* be at most 1 message callback function.
+* @details IoTHubDeviceClient_LL is a module that allows a user (usually a
+* device) to communicate with an Azure IoTHub. It can send events
+* and receive messages. At any given moment in time there can only
+* be at most 1 message callback function.
*
-* This API surface contains a set of APIs that allows the user to
-* interact with the lower layer portion of the IoTHubClient. These APIs
-* contain @c _LL_ in their name, but retain the same functionality like the
-* @c IoTHubDeviceClient_... APIs, with one difference. If the @c _LL_ APIs are
-* used then the user is responsible for scheduling when the actual work done
-* by the IoTHubClient happens (when the data is sent/received on/from the wire).
-* This is useful for constrained devices where spinning a separate thread is
-* often not desired.
+* This API surface contains a set of APIs that allows the user to
+* interact with the lower layer portion of the IoTHubClient. These APIs
+* contain @c _LL_ in their name, but retain the same functionality like the
+* @c IoTHubDeviceClient_... APIs, with one difference. If the @c _LL_ APIs are
+* used then the user is responsible for scheduling when the actual work done
+* by the IoTHubClient happens (when the data is sent/received on/from the wire).
+* This is useful for constrained devices where spinning a separate thread is
+* often not desired.
*/
#ifndef IOTHUB_DEVICE_CLIENT_LL_H
@@ -41,235 +41,235 @@
/**
- * @brief Creates a IoT Hub client for communication with an existing
- * IoT Hub using the specified connection string parameter.
+ * @brief Creates a IoT Hub client for communication with an existing
+ * IoT Hub using the specified connection string parameter.
*
- * @param connectionString Pointer to a character string
- * @param protocol Function pointer for protocol implementation
+ * @param connectionString Pointer to a character string
+ * @param protocol Function pointer for protocol implementation
*
- * Sample connection string:
- * <blockquote>
- * <pre>HostName=[IoT Hub name goes here].[IoT Hub suffix goes here, e.g., private.azure-devices-int.net];DeviceId=[Device ID goes here];SharedAccessKey=[Device key goes here];</pre>
- * </blockquote>
+ * Sample connection string:
+ * <blockquote>
+ * <pre>HostName=[IoT Hub name goes here].[IoT Hub suffix goes here, e.g., private.azure-devices-int.net];DeviceId=[Device ID goes here];SharedAccessKey=[Device key goes here];</pre>
+ * </blockquote>
*
- * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
- * invoking other functions for IoT Hub client and @c NULL on failure.
+ * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
+ * invoking other functions for IoT Hub client and @c NULL on failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_CreateFromConnectionString, const char*, connectionString, IOTHUB_CLIENT_TRANSPORT_PROVIDER, protocol);
/**
- * @brief Creates a IoT Hub client for communication with an existing IoT
- * Hub using the specified parameters.
+ * @brief Creates a IoT Hub client for communication with an existing IoT
+ * Hub using the specified parameters.
*
- * @param config Pointer to an @c IOTHUB_CLIENT_CONFIG structure
+ * @param config Pointer to an @c IOTHUB_CLIENT_CONFIG structure
*
- * The API does not allow sharing of a connection across multiple
- * devices. This is a blocking call.
+ * The API does not allow sharing of a connection across multiple
+ * devices. This is a blocking call.
*
- * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
- * invoking other functions for IoT Hub client and @c NULL on failure.
+ * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
+ * invoking other functions for IoT Hub client and @c NULL on failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_Create, const IOTHUB_CLIENT_CONFIG*, config);
/**
- * @brief Creates a IoT Hub client for communication with an existing IoT
- * Hub using an existing transport.
+ * @brief Creates a IoT Hub client for communication with an existing IoT
+ * Hub using an existing transport.
*
- * @param config Pointer to an @c IOTHUB_CLIENT_DEVICE_CONFIG structure
+ * @param config Pointer to an @c IOTHUB_CLIENT_DEVICE_CONFIG structure
*
- * The API *allows* sharing of a connection across multiple
- * devices. This is a blocking call.
+ * The API *allows* sharing of a connection across multiple
+ * devices. This is a blocking call.
*
- * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
- * invoking other functions for IoT Hub client and @c NULL on failure.
+ * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
+ * invoking other functions for IoT Hub client and @c NULL on failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_CreateWithTransport, const IOTHUB_CLIENT_DEVICE_CONFIG*, config);
/**
- * @brief Creates a IoT Hub client for communication with an existing IoT
- * Hub using the device auth module.
+ * @brief Creates a IoT Hub client for communication with an existing IoT
+ * Hub using the device auth module.
*
- * @param iothub_uri Pointer to an ioThub hostname received in the registration process
- * @param device_id Pointer to the device Id of the device
- * @param device_auth_handle a device auth handle used to generate the connection string
- * @param protocol Function pointer for protocol implementation
+ * @param iothub_uri Pointer to an ioThub hostname received in the registration process
+ * @param device_id Pointer to the device Id of the device
+ * @param device_auth_handle A device auth handle used to generate the connection string
+ * @param protocol Function pointer for protocol implementation
*
- * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
- * invoking other functions for IoT Hub client and @c NULL on failure.
+ * @return A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
+ * invoking other functions for IoT Hub client and @c NULL on failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_CreateFromDeviceAuth, const char*, iothub_uri, const char*, device_id, IOTHUB_CLIENT_TRANSPORT_PROVIDER, protocol);
/**
- * @brief Disposes of resources allocated by the IoT Hub client. This is a
- * blocking call.
+ * @brief Disposes of resources allocated by the IoT Hub client. This is a
+ * blocking call.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param iotHubClientHandle The handle created by a call to the create function.
*/
MOCKABLE_FUNCTION(, void, IoTHubDeviceClient_LL_Destroy, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle);
/**
- * @brief Asynchronous call to send the message specified by @p eventMessageHandle.
+ * @brief Asynchronous call to send the message specified by @p eventMessageHandle.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param eventMessageHandle The handle to an IoT Hub message.
- * @param eventConfirmationCallback The callback specified by the device for receiving
- * confirmation of the delivery of the IoT Hub message.
- * This callback can be expected to invoke the
- * ::IoTHubDeviceClient_LL_SendEventAsync function for the
- * same message in an attempt to retry sending a failing
- * message. The user can specify a @c NULL value here to
- * indicate that no callback is required.
- * @param userContextCallback User specified context that will be provided to the
- * callback. This can be @c NULL.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param eventMessageHandle The handle to an IoT Hub message.
+ * @param eventConfirmationCallback The callback specified by the device for receiving
+ * confirmation of the delivery of the IoT Hub message.
+ * This callback can be expected to invoke the
+ * ::IoTHubDeviceClient_LL_SendEventAsync function for the
+ * same message in an attempt to retry sending a failing
+ * message. The user can specify a @c NULL value here to
+ * indicate that no callback is required.
+ * @param userContextCallback User specified context that will be provided to the
+ * callback. This can be @c NULL.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SendEventAsync, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_MESSAGE_HANDLE, eventMessageHandle, IOTHUB_CLIENT_EVENT_CONFIRMATION_CALLBACK, eventConfirmationCallback, void*, userContextCallback);
/**
- * @brief This function returns the current sending status for IoTHubClient.
+ * @brief This function returns the current sending status for IoTHubClient.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param iotHubClientStatus The sending state is populated at the address pointed
- * at by this parameter. The value will be set to
- * @c IOTHUBCLIENT_SENDSTATUS_IDLE if there is currently
- * no item to be sent and @c IOTHUBCLIENT_SENDSTATUS_BUSY
- * if there are.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param iotHubClientStatus The sending state is populated at the address pointed
+ * at by this parameter. The value will be set to
+ * @c IOTHUBCLIENT_SENDSTATUS_IDLE if there is currently
+ * no item to be sent and @c IOTHUBCLIENT_SENDSTATUS_BUSY
+ * if there are.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_GetSendStatus, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_STATUS*, iotHubClientStatus);
/**
- * @brief Sets up the message callback to be invoked when IoT Hub issues a
- * message to the device. This is a blocking call.
+ * @brief Sets up the message callback to be invoked when IoT Hub issues a
+ * message to the device. This is a blocking call.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param messageCallback The callback specified by the device for receiving
- * messages from IoT Hub.
- * @param userContextCallback User specified context that will be provided to the
- * callback. This can be @c NULL.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param messageCallback The callback specified by the device for receiving
+ * messages from IoT Hub.
+ * @param userContextCallback User specified context that will be provided to the
+ * callback. This can be @c NULL.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetMessageCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_MESSAGE_CALLBACK_ASYNC, messageCallback, void*, userContextCallback);
/**
- * @brief Sets up the connection status callback to be invoked representing the status of
+ * @brief Sets up the connection status callback to be invoked representing the status of
* the connection to IOT Hub. This is a blocking call.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param connectionStatusCallback The callback specified by the device for receiving
- * updates about the status of the connection to IoT Hub.
- * @param userContextCallback User specified context that will be provided to the
- * callback. This can be @c NULL.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param connectionStatusCallback The callback specified by the device for receiving
+ * updates about the status of the connection to IoT Hub.
+ * @param userContextCallback User specified context that will be provided to the
+ * callback. This can be @c NULL.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetConnectionStatusCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_CONNECTION_STATUS_CALLBACK, connectionStatusCallback, void*, userContextCallback);
/**
- * @brief Sets up the connection status callback to be invoked representing the status of
+ * @brief Sets up the connection status callback to be invoked representing the status of
* the connection to IOT Hub. This is a blocking call.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param retryPolicy The policy to use to reconnect to IoT Hub when a
- * connection drops.
- * @param retryTimeoutLimitInSeconds Maximum amount of time(seconds) to attempt reconnection when a
- * connection drops to IOT Hub.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param retryPolicy The policy to use to reconnect to IoT Hub when a
+ * connection drops.
+ * @param retryTimeoutLimitInSeconds Maximum amount of time(seconds) to attempt reconnection when a
+ * connection drops to IOT Hub.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetRetryPolicy, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_RETRY_POLICY, retryPolicy, size_t, retryTimeoutLimitInSeconds);
/**
- * @brief Sets up the connection status callback to be invoked representing the status of
+ * @brief Sets up the connection status callback to be invoked representing the status of
* the connection to IOT Hub. This is a blocking call.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param retryPolicy Out parameter containing the policy to use to reconnect to IoT Hub.
- * @param retryTimeoutLimitInSeconds Out parameter containing maximum amount of time in seconds to attempt reconnection
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param retryPolicy Out parameter containing the policy to use to reconnect to IoT Hub.
+ * @param retryTimeoutLimitInSeconds Out parameter containing maximum amount of time in seconds to attempt reconnection
to IOT Hub.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_GetRetryPolicy, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_RETRY_POLICY*, retryPolicy, size_t*, retryTimeoutLimitInSeconds);
/**
- * @brief This function returns in the out parameter @p lastMessageReceiveTime
- * what was the value of the @c time function when the last message was
- * received at the client.
+ * @brief This function returns in the out parameter @p lastMessageReceiveTime
+ * what was the value of the @c time function when the last message was
+ * received at the client.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param lastMessageReceiveTime Out parameter containing the value of @c time function
- * when the last message was received.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param lastMessageReceiveTime Out parameter containing the value of @c time function
+ * when the last message was received.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_GetLastMessageReceiveTime, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, time_t*, lastMessageReceiveTime);
/**
- * @brief This function is meant to be called by the user when work
- * (sending/receiving) can be done by the IoTHubClient.
+ * @brief This function is meant to be called by the user when work
+ * (sending/receiving) can be done by the IoTHubClient.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param iotHubClientHandle The handle created by a call to the create function.
*
- * All IoTHubClient interactions (in regards to network traffic
- * and/or user level callbacks) are the effect of calling this
- * function and they take place synchronously inside _DoWork.
+ * All IoTHubClient interactions (in regards to network traffic
+ * and/or user level callbacks) are the effect of calling this
+ * function and they take place synchronously inside _DoWork.
*/
MOCKABLE_FUNCTION(, void, IoTHubDeviceClient_LL_DoWork, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle);
/**
- * @brief This API sets a runtime option identified by parameter @p optionName
- * to a value pointed to by @p value. @p optionName and the data type
- * @p value is pointing to are specific for every option.
+ * @brief This API sets a runtime option identified by parameter @p optionName
+ * to a value pointed to by @p value. @p optionName and the data type
+ * @p value is pointing to are specific for every option.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param optionName Name of the option.
- * @param value The value.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param optionName Name of the option.
+ * @param value The value.
*
- * The options that can be set via this API are:
- * - @b timeout - the maximum time in milliseconds a communication is
- * allowed to use. @p value is a pointer to an @c unsigned @c int with
- * the timeout value in milliseconds. This is only supported for the HTTP
- * protocol as of now. When the HTTP protocol uses CURL, the meaning of
- * the parameter is <em>total request time</em>. When the HTTP protocol uses
- * winhttp, the meaning is the same as the @c dwSendTimeout and
- * @c dwReceiveTimeout parameters of the
- * <a href="https://msdn.microsoft.com/en-us/library/windows/desktop/aa384116(v=vs.85).aspx">
- * WinHttpSetTimeouts</a> API.
- * - @b CURLOPT_LOW_SPEED_LIMIT - only available for HTTP protocol and only
- * when CURL is used. It has the same meaning as CURL's option with the same
- * name. @p value is pointer to a long.
- * - @b CURLOPT_LOW_SPEED_TIME - only available for HTTP protocol and only
- * when CURL is used. It has the same meaning as CURL's option with the same
- * name. @p value is pointer to a long.
- * - @b CURLOPT_FORBID_REUSE - only available for HTTP protocol and only
- * when CURL is used. It has the same meaning as CURL's option with the same
- * name. @p value is pointer to a long.
- * - @b CURLOPT_FRESH_CONNECT - only available for HTTP protocol and only
- * when CURL is used. It has the same meaning as CURL's option with the same
- * name. @p value is pointer to a long.
- * - @b CURLOPT_VERBOSE - only available for HTTP protocol and only
- * when CURL is used. It has the same meaning as CURL's option with the same
- * name. @p value is pointer to a long.
+ * The options that can be set via this API are:
+ * - @b timeout - the maximum time in milliseconds a communication is
+ * allowed to use. @p value is a pointer to an @c unsigned @c int with
+ * the timeout value in milliseconds. This is only supported for the HTTP
+ * protocol as of now. When the HTTP protocol uses CURL, the meaning of
+ * the parameter is <em>total request time</em>. When the HTTP protocol uses
+ * winhttp, the meaning is the same as the @c dwSendTimeout and
+ * @c dwReceiveTimeout parameters of the
+ * <a href="https://msdn.microsoft.com/en-us/library/windows/desktop/aa384116(v=vs.85).aspx">
+ * WinHttpSetTimeouts</a> API.
+ * - @b CURLOPT_LOW_SPEED_LIMIT - only available for HTTP protocol and only
+ * when CURL is used. It has the same meaning as CURL's option with the same
+ * name. @p value is pointer to a long.
+ * - @b CURLOPT_LOW_SPEED_TIME - only available for HTTP protocol and only
+ * when CURL is used. It has the same meaning as CURL's option with the same
+ * name. @p value is pointer to a long.
+ * - @b CURLOPT_FORBID_REUSE - only available for HTTP protocol and only
+ * when CURL is used. It has the same meaning as CURL's option with the same
+ * name. @p value is pointer to a long.
+ * - @b CURLOPT_FRESH_CONNECT - only available for HTTP protocol and only
+ * when CURL is used. It has the same meaning as CURL's option with the same
+ * name. @p value is pointer to a long.
+ * - @b CURLOPT_VERBOSE - only available for HTTP protocol and only
+ * when CURL is used. It has the same meaning as CURL's option with the same
+ * name. @p value is pointer to a long.
* - @b keepalive - available for MQTT protocol. Integer value that sets the
* interval in seconds when pings are sent to the server.
* - @b logtrace - available for MQTT protocol. Boolean value that turns on and
@@ -277,82 +277,82 @@
* - @b sas_token_lifetime - available for MQTT & AMQP protocol. size_t value that that determines the
* sas token timeout length.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetOption, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const char*, optionName, const void*, value);
/**
- * @brief This API specifies a call back to be used when the device receives a desired state update.
+ * @brief This API specifies a call back to be used when the device receives a desired state update.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param deviceTwinCallback The callback specified by the device client to be used for updating
- * the desired state. The callback will be called in response to patch
- * request send by the IoTHub services. The payload will be passed to the
- * callback, along with two version numbers:
- * - Desired:
- * - LastSeenReported:
- * @param userContextCallback User specified context that will be provided to the
- * callback. This can be @c NULL.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param deviceTwinCallback The callback specified by the device client to be used for updating
+ * the desired state. The callback will be called in response to patch
+ * request send by the IoTHub services. The payload will be passed to the
+ * callback, along with two version numbers:
+ * - Desired:
+ * - LastSeenReported:
+ * @param userContextCallback User specified context that will be provided to the
+ * callback. This can be @c NULL.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetDeviceTwinCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_DEVICE_TWIN_CALLBACK, deviceTwinCallback, void*, userContextCallback);
/**
- * @brief This API sneds a report of the device's properties and their current values.
+ * @brief This API sneds a report of the device's properties and their current values.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param reportedState The current device property values to be 'reported' to the IoTHub.
- * @param reportedStateCallback The callback specified by the device client to be called with the
- * result of the transaction.
- * @param userContextCallback User specified context that will be provided to the
- * callback. This can be @c NULL.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param reportedState The current device property values to be 'reported' to the IoTHub.
+ * @param reportedStateCallback The callback specified by the device client to be called with the
+ * result of the transaction.
+ * @param userContextCallback User specified context that will be provided to the
+ * callback. This can be @c NULL.
*
- * @b NOTE: The application behavior is undefined if the user calls
- * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
+ * @b NOTE: The application behavior is undefined if the user calls
+ * the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SendReportedState, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const unsigned char*, reportedState, size_t, size, IOTHUB_CLIENT_REPORTED_STATE_CALLBACK, reportedStateCallback, void*, userContextCallback);
/**
- * @brief This API sets callback for async cloud to device method call.
+ * @brief This API sets callback for async cloud to device method call.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param inboundDeviceMethodCallback The callback which will be called by IoTHub.
- * @param userContextCallback User specified context that will be provided to the
- * callback. This can be @c NULL.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param inboundDeviceMethodCallback The callback which will be called by IoTHub.
+ * @param userContextCallback User specified context that will be provided to the
+ * callback. This can be @c NULL.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetDeviceMethodCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_DEVICE_METHOD_CALLBACK_ASYNC, deviceMethodCallback, void*, userContextCallback);
/**
- * @brief This API responses to a asnyc method callback identified the methodId.
+ * @brief This API responses to a asnyc method callback identified the methodId.
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param methodId The methodId of the Device Method callback.
- * @param response The response data for the method callback.
- * @param response_size The size of the response data buffer.
- * @param status_response The status response of the method callback.
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param methodId The methodId of the Device Method callback.
+ * @param response The response data for the method callback.
+ * @param response_size The size of the response data buffer.
+ * @param status_response The status response of the method callback.
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_DeviceMethodResponse, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, METHOD_HANDLE, methodId, const unsigned char*, response, size_t, respSize, int, statusCode);
#ifndef DONT_USE_UPLOADTOBLOB
/**
- * @brief This API uploads to Azure Storage the content pointed to by @p source having the size @p size
+ * @brief This API uploads to Azure Storage the content pointed to by @p source having the size @p size
* under the blob name devicename/@pdestinationFileName
*
- * @param iotHubClientHandle The handle created by a call to the create function.
- * @param destinationFileName name of the file.
- * @param source pointer to the source for file content (can be NULL)
+ * @param iotHubClientHandle The handle created by a call to the create function.
+ * @param destinationFileName name of the file.
+ * @param source pointer to the source for file content (can be NULL)
* @param size the size of the source in memory (if @p source is NULL then size needs to be 0).
*
- * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
+ * @return IOTHUB_CLIENT_OK upon success or an error code upon failure.
*/
MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_UploadToBlob, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const char*, destinationFileName, const unsigned char*, source, size_t, size);
