
AMMP demonstration using Freescale FRDM-KL25Z and Adafruit CC3000 Arduino shield
Dependencies: MMA8451Q NVIC_set_all_priorities TSI cc3000_hostdriver_mbedsocket mbed
Fork of AxedaGo-Freescale by
Diff: init.cpp
- Revision:
- 4:3c2e21757a9c
- Parent:
- 3:ec0169cbc94d
- Child:
- 5:c99347399fb7
diff -r ec0169cbc94d -r 3c2e21757a9c init.cpp --- a/init.cpp Tue Oct 08 14:54:06 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include "main.h" -#include "mbed.h" - -#if (MY_BOARD == WIGO) - -#include "NVIC_set_all_priorities.h" - -/** - * \brief Wi-Go initialization - * \param none - * \return none - */ -void init() { - DigitalOut PWR_EN1(PTB2); - DigitalOut PWR_EN2(PTB3); - - // Wi-Go set current to 500mA since we're turning on the Wi-Fi - PWR_EN1 = 0; - PWR_EN2 = 1; - - NVIC_set_all_irq_priorities(3); - NVIC_SetPriority(SPI0_IRQn, 0x0); // Wi-Fi SPI interrupt must be higher priority than SysTick - NVIC_SetPriority(PORTA_IRQn, 0x1); - NVIC_SetPriority(SysTick_IRQn, 0x2); // SysTick set to lower priority than Wi-Fi SPI bus interrupt - PORTA->PCR[16] |=PORT_PCR_ISF_MASK; - PORTA->ISFR |= (1 << 16); -} - -#elif (MY_BOARD == WIFI_DIPCORTEX) - -/** - * \brief Wifi DipCortex initialization - * \param none - * \return none - */ -void init() { - NVIC_SetPriority(SSP1_IRQn, 0x0); - NVIC_SetPriority(PIN_INT0_IRQn, 0x1); - - // SysTick set to lower priority than Wi-Fi SPI bus interrupt - NVIC_SetPriority(SysTick_IRQn, 0x2); -} - -#else - -/** - * \brief Place here init routine for your board - * \param none - * \return none - */ -void init() { - -} - -#endif