Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of target-freescale-ksdk by
gpio_irq_api.c
- Committer:
- screamer
- Date:
- 2016-03-23
- Revision:
- 0:e4d670b91a9a
- Child:
- 1:d01108809007
File content as of revision 0:e4d670b91a9a:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include <stddef.h> #include "cmsis.h" #include "gpio_irq_api.h" #if DEVICE_INTERRUPTIN #include "gpio_api.h" #include "fsl_gpio_hal.h" #include "fsl_port_hal.h" #include "mbed_error.h" #define CHANNEL_NUM 160 static uint32_t channel_ids[CHANNEL_NUM] = {0}; static gpio_irq_handler irq_handler; #define IRQ_DISABLED (0) #define IRQ_RAISING_EDGE (9) #define IRQ_FALLING_EDGE (10) #define IRQ_EITHER_EDGE (11) static void handle_interrupt_in(PortName port, int ch_base) { uint32_t i; uint32_t port_addrs[] = PORT_BASE_ADDRS; for (i = 0; i < 32; i++) { if (PORT_HAL_IsPinIntPending(port_addrs[port], i)) { uint32_t id = channel_ids[ch_base + i]; if (id == 0) { continue; } gpio_irq_event event = IRQ_NONE; uint32_t gpio_addrs[] = GPIO_BASE_ADDRS; switch (BR_PORT_PCRn_IRQC(port_addrs[port], i)) { case IRQ_RAISING_EDGE: event = IRQ_RISE; break; case IRQ_FALLING_EDGE: event = IRQ_FALL; break; case IRQ_EITHER_EDGE: event = (GPIO_HAL_ReadPinInput(gpio_addrs[port], i)) ? (IRQ_RISE) : (IRQ_FALL); break; } if (event != IRQ_NONE) { irq_handler(id, event); } } } PORT_HAL_ClearPortIntFlag(port_addrs[port]); } void gpio_irqA(void) {handle_interrupt_in(PortA, 0);} void gpio_irqB(void) {handle_interrupt_in(PortB, 32);} void gpio_irqC(void) {handle_interrupt_in(PortC, 64);} void gpio_irqD(void) {handle_interrupt_in(PortD, 96);} void gpio_irqE(void) {handle_interrupt_in(PortE, 128);} int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { if (pin == NC) { return -1; } irq_handler = handler; obj->port = pin >> GPIO_PORT_SHIFT; obj->pin = pin & 0x7F; uint32_t ch_base = 0; uint32_t vector = (uint32_t)gpio_irqA; IRQn_Type irq_n = PORTA_IRQn; switch (obj->port) { case PortA: ch_base = 0; irq_n = PORTA_IRQn; vector = (uint32_t)gpio_irqA; break; case PortB: ch_base = 32; irq_n = PORTB_IRQn; vector = (uint32_t)gpio_irqB; break; case PortC: ch_base = 64; irq_n = PORTC_IRQn; vector = (uint32_t)gpio_irqC; break; case PortD: ch_base = 96; irq_n = PORTD_IRQn; vector = (uint32_t)gpio_irqD; break; case PortE: ch_base = 128; irq_n = PORTE_IRQn; vector = (uint32_t)gpio_irqE; break; default: error("gpio_irq only supported on port A-E."); break; } NVIC_SetVector(irq_n, vector); NVIC_EnableIRQ(irq_n); obj->ch = ch_base + obj->pin; channel_ids[obj->ch] = id; return 0; } void gpio_irq_free(gpio_irq_t *obj) { channel_ids[obj->ch] = 0; } void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { uint32_t port_addrs[] = PORT_BASE_ADDRS; port_interrupt_config_t irq_settings = kPortIntDisabled; switch (BR_PORT_PCRn_IRQC(port_addrs[obj->port], obj->pin)) { case IRQ_DISABLED: if (enable) irq_settings = (event == IRQ_RISE) ? (kPortIntRisingEdge) : (kPortIntFallingEdge); break; case IRQ_RAISING_EDGE: if (enable) { irq_settings = (event == IRQ_RISE) ? (kPortIntRisingEdge) : (kPortIntEitherEdge); } else { if (event == IRQ_FALL) irq_settings = kPortIntRisingEdge; } break; case IRQ_FALLING_EDGE: if (enable) { irq_settings = (event == IRQ_FALL) ? (kPortIntFallingEdge) : (kPortIntEitherEdge); } else { if (event == IRQ_RISE) irq_settings = kPortIntFallingEdge; } break; case IRQ_EITHER_EDGE: if (enable) { irq_settings = kPortIntEitherEdge; } else { irq_settings = (event == IRQ_RISE) ? (kPortIntFallingEdge) : (kPortIntRisingEdge); } break; } PORT_HAL_SetPinIntMode(port_addrs[obj->port], obj->pin, irq_settings); PORT_HAL_ClearPinIntFlag(port_addrs[obj->port], obj->pin); } void gpio_irq_enable(gpio_irq_t *obj) { switch (obj->port) { case PortA: NVIC_EnableIRQ(PORTA_IRQn); break; case PortB: NVIC_EnableIRQ(PORTB_IRQn); break; case PortC: NVIC_EnableIRQ(PORTC_IRQn); break; case PortD: NVIC_EnableIRQ(PORTD_IRQn); break; case PortE: NVIC_EnableIRQ(PORTE_IRQn); break; } } void gpio_irq_disable(gpio_irq_t *obj) { switch (obj->port) { case PortA: NVIC_DisableIRQ(PORTA_IRQn); break; case PortB: NVIC_DisableIRQ(PORTB_IRQn); break; case PortC: NVIC_DisableIRQ(PORTC_IRQn); break; case PortD: NVIC_DisableIRQ(PORTD_IRQn); break; case PortE: NVIC_DisableIRQ(PORTE_IRQn); break; } } #endif