Diff: ModeA/ModeA.cpp

Revision:

2:e7e39d27b11f

Parent:

0:d5312060f649

diff -r 76241e21ec61 -r e7e39d27b11f ModeA/ModeA.cpp
--- a/ModeA/ModeA.cpp	Mon Mar 13 07:01:51 2017 +0000
+++ b/ModeA/ModeA.cpp	Thu Jun 29 22:41:30 2017 +0000
@@ -1,17 +1,96 @@
 #include "ModeA.h"
 
-void mode_A() {
-    
+DigitalOut myled1(LED1);
+DigitalOut myled2(LED2);
+DigitalOut myled3(LED3);
+DigitalOut myled4(LED4);
+
+void mode_A()
+{
+
     lcd.clear();
+
+
     lcd.printString("Mode A",0,0);
     lcd.refresh();
     wait_ms(250);  // small delay to prevent previous press being detected again
 
-    while (button_a.read() == 0) {
-        
-        // code goes in here - this acts like the main while(1) loop
-        
+    while (button_a.read() == 0) { // code goes in here - this acts like the main while(1) loop
+
+        lcd.clear();
+
+        lcd.printString("Mode A",0,0);
+
+        int petrol[12][11] =   {
+            { 0,0,1,1,1,1,1,0,0,0,0 },
+            { 0,0,1,0,0,0,1,0,0,1,1 },
+            { 0,0,1,0,0,0,1,0,0,1,1 },
+            { 0,0,1,0,0,0,1,0,0,0,1 },
+            { 0,0,1,0,0,0,1,0,0,1,0 },
+            { 0,0,1,1,1,1,1,0,0,1,0 },
+            { 0,0,1,1,1,1,1,0,1,0,0 },
+            { 0,0,1,1,1,1,1,0,1,0,0 },
+            { 0,0,1,1,1,1,1,1,0,0,0 },
+            { 0,0,1,1,1,1,1,0,0,0,0 },
+            { 1,1,1,1,1,1,1,1,1,0,0 },
+            { 1,1,1,1,1,1,1,1,1,0,0 },
+        };
+        lcd.drawSprite(3,10,12,11,(int *)petrol);
 
+        int temp[19][3] =   {
+            { 0,1,0},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 1,0,1},
+            { 0,1,0},
+            { 1,1,1},
+            { 1,1,1},
+            { 1,0,1},
+            { 1,1,1},
+        };
+        lcd.drawSprite(6,27,19,3,(int *)temp);
+
+        float pot0_val = pot_0.read();
+        float pot1_val = pot_1.read();
+
+        lcd.drawRect(16,10,68,12,FILL_TRANSPARENT); // Fuel Bar
+        lcd.drawRect(16,30,68,12,FILL_TRANSPARENT); // Temperature Bar
+
+        float W1=pot0_val*67;
+        float W2=(pot1_val*67);
+
+        lcd.drawRect(17,11,W1,10,FILL_BLACK);
+        lcd.drawRect(17,31,W2,10,FILL_BLACK);
+
+        float Fuel_lvl=pot0_val*100;
+        float Engine_temp=(pot1_val*80)+50;
+        printf("Fuel level = %.02f%%        Engine temperature = %.02f Degrees C\n", Fuel_lvl, Engine_temp);
+
+        if (Fuel_lvl<20) {
+            myled4=1;
+        } else {
+            myled4=0;
+        }
+
+        if (Engine_temp>110) {
+            myled1=1;
+        } else {
+            myled1=0;
+        }
+
+
+        lcd.refresh();
+        wait_ms(100);
     }
 
 }
\ No newline at end of file