Akram khan / Mbed 2 deprecated RTOS_Project

RTOS project

Dependencies:   C12832_lcd EthernetInterface LM75B NTPClient SimpleSMTPClient TextLCD beep mbed-rtos mbed

Fork of RTOS_Project by Akram khan

Description:

RTOS project : Connected and automated manufacturing plant model. The Goal of this project is to use most of the IO on the mbed application board in a RTOS project. This simulates a manufacturing plant where temperature, potentiometer, lever control are performed and depending on the input and stored values alerts are issues on COM port, buzzer and LEDS. The LCD display and Ethernet control is used to display and collect logs.

Motivation

Internet of Things (IoT) is the network of physical objects accessed through the Internet, as defined by technology analysts and visionaries. These objects contain embedded technology to interact with internal states or the external environment. In other words, when objects can sense and communicate, it changes how and where decisions are made, and who makes them

Background and Goals

MBED application board used to simulate the real world scenario of a manufacturing plant. Goal is to use most of the existing Input/output ports on the application board in project. Learn to program in C and build on this project for future embedded projects.

System overview

/media/uploads/Akramkhan78/factory.png

Features

Inputs

  • Lever control monitor
  • Temperature monitor
  • Potentiometer monitor
    • Outputs
  • Factory status on LCD
  • Emergency alerts on LEDs
  • Audio alerts on Buzzer
    • Control and logging
  • Serial port used to display logs
  • Ethernet port used to send logs and receive alerts.
    • Main Manufacturing plant controller

Software architecture

Libraries 

#include "mbed.h"
#include "rtos.h"
#include "C12832_lcd.h"
#include "beep.h"  
#include "LM75B.h"
#include "EthernetInterface.h"
#include "NTPClient.h"
#include "SimpleSMTPClient.h"

Inputs/Outputs

DigitalOut   buzzer(p26) ;                            // Buzzer to alert the cooking stopped.
    LM75B       temperature(p28,p27);                // Temperature sensor
    C12832_LCD  lcd;                                 // LCD object from library.
    DigitalOut  led3(LED3);                          //  LED to display  cooking in progress
    DigitalOut  led2(LED2);                          //  LED to display  carousel turning
    AnalogIn pot1(p20);                              // Analog Potentiometer 1
    AnalogIn pot2(p19);                              // Analog Potentiometer 1
    Serial      pc(USBTX, USBRX);               // PuTTY terminal communication.

Interrupts used

    InterruptIn  InterJoyStickUp    (p15);          // joystick beat up pressed that will make controller stop
    InterruptIn  InterJoyStickDown  (p12);          // joystick beat up pressed that will make controller start
    InterruptIn  InterJoyStickLeft  (p13);          // joystick beat up pressed that will make clock time up.
    InterruptIn  InterJoyStickRight (p16);          // joystick beat up pressed that will make clock time down.
    InterruptIn  InterJoyStickCenter(p14);          //joystick beat up pressed that will make open close the door.
    InterruptIn  Interpotmeter1(p20);               // Potentiometer 1. 
    InterruptIn  Interpotmeter2(p19);               // Potentiometer 2.

ISR used

   void lcd_display();                         // Display on LCD.
    void int_ser_controller();                   // Ticker for MV.                
    void up_isr();                         // Stop the MV.
    void down_isr();                       // Start the MV.
    void right_rising_isr();               // Lower the clock.
    void left_rising_isr();                // Raise the clock.
    void default_isr();                    // reset
    void off_controller();                  // turn off blinker.
    void pot1_isr();                        // Potentiometer 1. 
    void pot2_isr();                        // Potentiometer 2.

Ticker used

    Ticker      tickercontroller;                // blinking LED.
    Ticker      tickerLCD;                      // display ticker.
    Timeout     timeoutDutyCycle;               // LED duty cycle delay.
    Timeout     timeoutcontroller;

Test cases

The main controller monitors various IO for changes and depending on the pre set values will send alerts to LEDs, LCD and Ethernet devices. Example: The Level 1 (potentiometer 1 ) is out of range. LED 2 is turned ON and the alert is send via ethernet and also displayed on LCD.

beep.lib@1:fbedd4d685c0, 2013-09-19 (annotated)

Committer:
Akramkhan78
Date:
Thu Sep 19 23:38:56 2013 +0000
Revision:
1:fbedd4d685c0
Parent:
0:89c1a68c483b 
clean up

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Akramkhan78 0:89c1a68c483b 1 https://mbed.org/users/dreschpe/code/beep/#d8e14429a95f