Diff: NetStack/lwip/core/udp.c

Revision:

0:616601bde9fb

diff -r 000000000000 -r 616601bde9fb NetStack/lwip/core/udp.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/NetStack/lwip/core/udp.c	Thu Feb 23 21:38:39 2012 +0000
@@ -0,0 +1,962 @@
+/**
+ * @file
+ * User Datagram Protocol module
+ *
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+
+
+/* udp.c
+ *
+ * The code for the User Datagram Protocol UDP & UDPLite (RFC 3828).
+ *
+ */
+
+/* @todo Check the use of '(struct udp_pcb).chksum_len_rx'!
+ */
+
+#include "lwip/opt.h"
+
+#if LWIP_UDP /* don't build if not configured for use in lwipopts.h */
+
+#include "lwip/udp.h"
+#include "lwip/def.h"
+#include "lwip/memp.h"
+#include "lwip/inet_chksum.h"
+#include "lwip/ip_addr.h"
+#include "lwip/netif.h"
+#include "lwip/icmp.h"
+#include "lwip/stats.h"
+#include "lwip/snmp.h"
+#include "arch/perf.h"
+#include "lwip/dhcp.h"
+
+#include <string.h>
+
+/* The list of UDP PCBs */
+/* exported in udp.h (was static) */
+struct udp_pcb *udp_pcbs;
+
+/**
+ * Process an incoming UDP datagram.
+ *
+ * Given an incoming UDP datagram (as a chain of pbufs) this function
+ * finds a corresponding UDP PCB and hands over the pbuf to the pcbs
+ * recv function. If no pcb is found or the datagram is incorrect, the
+ * pbuf is freed.
+ *
+ * @param p pbuf to be demultiplexed to a UDP PCB.
+ * @param inp network interface on which the datagram was received.
+ *
+ */
+void
+udp_input(struct pbuf *p, struct netif *inp)
+{
+  struct udp_hdr *udphdr;
+  struct udp_pcb *pcb, *prev;
+  struct udp_pcb *uncon_pcb;
+  struct ip_hdr *iphdr;
+  u16_t src, dest;
+  u8_t local_match;
+  u8_t broadcast;
+
+  PERF_START;
+
+  UDP_STATS_INC(udp.recv);
+
+  iphdr = (struct ip_hdr *)p->payload;
+
+  /* Check minimum length (IP header + UDP header)
+   * and move payload pointer to UDP header */
+  if (p->tot_len < (IPH_HL(iphdr) * 4 + UDP_HLEN) || pbuf_header(p, -(s16_t)(IPH_HL(iphdr) * 4))) {
+    /* drop short packets */
+    LWIP_DEBUGF(UDP_DEBUG,
+                ("udp_input: short UDP datagram (%"U16_F" bytes) discarded\n", p->tot_len));
+    UDP_STATS_INC(udp.lenerr);
+    UDP_STATS_INC(udp.drop);
+    snmp_inc_udpinerrors();
+    pbuf_free(p);
+    goto end;
+  }
+
+  udphdr = (struct udp_hdr *)p->payload;
+
+  /* is broadcast packet ? */
+  broadcast = ip_addr_isbroadcast(&current_iphdr_dest, inp);
+
+  LWIP_DEBUGF(UDP_DEBUG, ("udp_input: received datagram of length %"U16_F"\n", p->tot_len));
+
+  /* convert src and dest ports to host byte order */
+  src = ntohs(udphdr->src);
+  dest = ntohs(udphdr->dest);
+
+  udp_debug_print(udphdr);
+
+  /* print the UDP source and destination */
+  LWIP_DEBUGF(UDP_DEBUG,
+              ("udp (%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F") <-- "
+               "(%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F")\n",
+               ip4_addr1_16(&iphdr->dest), ip4_addr2_16(&iphdr->dest),
+               ip4_addr3_16(&iphdr->dest), ip4_addr4_16(&iphdr->dest), ntohs(udphdr->dest),
+               ip4_addr1_16(&iphdr->src), ip4_addr2_16(&iphdr->src),
+               ip4_addr3_16(&iphdr->src), ip4_addr4_16(&iphdr->src), ntohs(udphdr->src)));
+
+#if LWIP_DHCP
+  pcb = NULL;
+  /* when LWIP_DHCP is active, packets to DHCP_CLIENT_PORT may only be processed by
+     the dhcp module, no other UDP pcb may use the local UDP port DHCP_CLIENT_PORT */
+  if (dest == DHCP_CLIENT_PORT) {
+    /* all packets for DHCP_CLIENT_PORT not coming from DHCP_SERVER_PORT are dropped! */
+    if (src == DHCP_SERVER_PORT) {
+      if ((inp->dhcp != NULL) && (inp->dhcp->pcb != NULL)) {
+        /* accept the packe if 
+           (- broadcast or directed to us) -> DHCP is link-layer-addressed, local ip is always ANY!
+           - inp->dhcp->pcb->remote == ANY or iphdr->src */
+        if ((ip_addr_isany(&inp->dhcp->pcb->remote_ip) ||
+           ip_addr_cmp(&(inp->dhcp->pcb->remote_ip), &current_iphdr_src))) {
+          pcb = inp->dhcp->pcb;
+        }
+      }
+    }
+  } else
+#endif /* LWIP_DHCP */
+  {
+    prev = NULL;
+    local_match = 0;
+    uncon_pcb = NULL;
+    /* Iterate through the UDP pcb list for a matching pcb.
+     * 'Perfect match' pcbs (connected to the remote port & ip address) are
+     * preferred. If no perfect match is found, the first unconnected pcb that
+     * matches the local port and ip address gets the datagram. */
+    for (pcb = udp_pcbs; pcb != NULL; pcb = pcb->next) {
+      local_match = 0;
+      /* print the PCB local and remote address */
+      LWIP_DEBUGF(UDP_DEBUG,
+                  ("pcb (%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F") --- "
+                   "(%"U16_F".%"U16_F".%"U16_F".%"U16_F", %"U16_F")\n",
+                   ip4_addr1_16(&pcb->local_ip), ip4_addr2_16(&pcb->local_ip),
+                   ip4_addr3_16(&pcb->local_ip), ip4_addr4_16(&pcb->local_ip), pcb->local_port,
+                   ip4_addr1_16(&pcb->remote_ip), ip4_addr2_16(&pcb->remote_ip),
+                   ip4_addr3_16(&pcb->remote_ip), ip4_addr4_16(&pcb->remote_ip), pcb->remote_port));
+
+      /* compare PCB local addr+port to UDP destination addr+port */
+      if ((pcb->local_port == dest) &&
+          ((!broadcast && ip_addr_isany(&pcb->local_ip)) ||
+           ip_addr_cmp(&(pcb->local_ip), &current_iphdr_dest) ||
+#if LWIP_IGMP
+           ip_addr_ismulticast(&current_iphdr_dest) ||
+#endif /* LWIP_IGMP */
+#if IP_SOF_BROADCAST_RECV
+           (broadcast && (pcb->so_options & SOF_BROADCAST)))) {
+#else  /* IP_SOF_BROADCAST_RECV */
+           (broadcast))) {
+#endif /* IP_SOF_BROADCAST_RECV */
+        local_match = 1;
+        if ((uncon_pcb == NULL) && 
+            ((pcb->flags & UDP_FLAGS_CONNECTED) == 0)) {
+          /* the first unconnected matching PCB */
+          uncon_pcb = pcb;
+        }
+      }
+      /* compare PCB remote addr+port to UDP source addr+port */
+      if ((local_match != 0) &&
+          (pcb->remote_port == src) &&
+          (ip_addr_isany(&pcb->remote_ip) ||
+           ip_addr_cmp(&(pcb->remote_ip), &current_iphdr_src))) {
+        /* the first fully matching PCB */
+        if (prev != NULL) {
+          /* move the pcb to the front of udp_pcbs so that is
+             found faster next time */
+          prev->next = pcb->next;
+          pcb->next = udp_pcbs;
+          udp_pcbs = pcb;
+        } else {
+          UDP_STATS_INC(udp.cachehit);
+        }
+        break;
+      }
+      prev = pcb;
+    }
+    /* no fully matching pcb found? then look for an unconnected pcb */
+    if (pcb == NULL) {
+      pcb = uncon_pcb;
+    }
+  }
+
+  /* Check checksum if this is a match or if it was directed at us. */
+  if (pcb != NULL || ip_addr_cmp(&inp->ip_addr, &current_iphdr_dest)) {
+    LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_input: calculating checksum\n"));
+#if LWIP_UDPLITE
+    if (IPH_PROTO(iphdr) == IP_PROTO_UDPLITE) {
+      /* Do the UDP Lite checksum */
+#if CHECKSUM_CHECK_UDP
+      u16_t chklen = ntohs(udphdr->len);
+      if (chklen < sizeof(struct udp_hdr)) {
+        if (chklen == 0) {
+          /* For UDP-Lite, checksum length of 0 means checksum
+             over the complete packet (See RFC 3828 chap. 3.1) */
+          chklen = p->tot_len;
+        } else {
+          /* At least the UDP-Lite header must be covered by the
+             checksum! (Again, see RFC 3828 chap. 3.1) */
+          UDP_STATS_INC(udp.chkerr);
+          UDP_STATS_INC(udp.drop);
+          snmp_inc_udpinerrors();
+          pbuf_free(p);
+          goto end;
+        }
+      }
+      if (inet_chksum_pseudo_partial(p, &current_iphdr_src, &current_iphdr_dest,
+                             IP_PROTO_UDPLITE, p->tot_len, chklen) != 0) {
+       LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
+                   ("udp_input: UDP Lite datagram discarded due to failing checksum\n"));
+        UDP_STATS_INC(udp.chkerr);
+        UDP_STATS_INC(udp.drop);
+        snmp_inc_udpinerrors();
+        pbuf_free(p);
+        goto end;
+      }
+#endif /* CHECKSUM_CHECK_UDP */
+    } else
+#endif /* LWIP_UDPLITE */
+    {
+#if CHECKSUM_CHECK_UDP
+      if (udphdr->chksum != 0) {
+        if (inet_chksum_pseudo(p, ip_current_src_addr(), ip_current_dest_addr(),
+                               IP_PROTO_UDP, p->tot_len) != 0) {
+          LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
+                      ("udp_input: UDP datagram discarded due to failing checksum\n"));
+          UDP_STATS_INC(udp.chkerr);
+          UDP_STATS_INC(udp.drop);
+          snmp_inc_udpinerrors();
+          pbuf_free(p);
+          goto end;
+        }
+      }
+#endif /* CHECKSUM_CHECK_UDP */
+    }
+    if(pbuf_header(p, -UDP_HLEN)) {
+      /* Can we cope with this failing? Just assert for now */
+      LWIP_ASSERT("pbuf_header failed\n", 0);
+      UDP_STATS_INC(udp.drop);
+      snmp_inc_udpinerrors();
+      pbuf_free(p);
+      goto end;
+    }
+    if (pcb != NULL) {
+      snmp_inc_udpindatagrams();
+#if SO_REUSE && SO_REUSE_RXTOALL
+      if ((broadcast || ip_addr_ismulticast(&current_iphdr_dest)) &&
+          ((pcb->so_options & SOF_REUSEADDR) != 0)) {
+        /* pass broadcast- or multicast packets to all multicast pcbs
+           if SOF_REUSEADDR is set on the first match */
+        struct udp_pcb *mpcb;
+        u8_t p_header_changed = 0;
+        for (mpcb = udp_pcbs; mpcb != NULL; mpcb = mpcb->next) {
+          if (mpcb != pcb) {
+            /* compare PCB local addr+port to UDP destination addr+port */
+            if ((mpcb->local_port == dest) &&
+                ((!broadcast && ip_addr_isany(&mpcb->local_ip)) ||
+                 ip_addr_cmp(&(mpcb->local_ip), &current_iphdr_dest) ||
+#if LWIP_IGMP
+                 ip_addr_ismulticast(&current_iphdr_dest) ||
+#endif /* LWIP_IGMP */
+#if IP_SOF_BROADCAST_RECV
+                 (broadcast && (mpcb->so_options & SOF_BROADCAST)))) {
+#else  /* IP_SOF_BROADCAST_RECV */
+                 (broadcast))) {
+#endif /* IP_SOF_BROADCAST_RECV */
+              /* pass a copy of the packet to all local matches */
+              if (mpcb->recv != NULL) {
+                struct pbuf *q;
+                /* for that, move payload to IP header again */
+                if (p_header_changed == 0) {
+                  pbuf_header(p, (s16_t)((IPH_HL(iphdr) * 4) + UDP_HLEN));
+                  p_header_changed = 1;
+                }
+                q = pbuf_alloc(PBUF_RAW, p->tot_len, PBUF_RAM);
+                if (q != NULL) {
+                  err_t err = pbuf_copy(q, p);
+                  if (err == ERR_OK) {
+                    /* move payload to UDP data */
+                    pbuf_header(q, -(s16_t)((IPH_HL(iphdr) * 4) + UDP_HLEN));
+                    mpcb->recv(mpcb->recv_arg, mpcb, q, ip_current_src_addr(), src);
+                  }
+                }
+              }
+            }
+          }
+        }
+        if (p_header_changed) {
+          /* and move payload to UDP data again */
+          pbuf_header(p, -(s16_t)((IPH_HL(iphdr) * 4) + UDP_HLEN));
+        }
+      }
+#endif /* SO_REUSE && SO_REUSE_RXTOALL */
+      /* callback */
+      if (pcb->recv != NULL) {
+        /* now the recv function is responsible for freeing p */
+        pcb->recv(pcb->recv_arg, pcb, p, ip_current_src_addr(), src);
+      } else {
+        /* no recv function registered? then we have to free the pbuf! */
+        pbuf_free(p);
+        goto end;
+      }
+    } else {
+      LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_input: not for us.\n"));
+
+#if LWIP_ICMP
+      /* No match was found, send ICMP destination port unreachable unless
+         destination address was broadcast/multicast. */
+      if (!broadcast &&
+          !ip_addr_ismulticast(&current_iphdr_dest)) {
+        /* move payload pointer back to ip header */
+        pbuf_header(p, (IPH_HL(iphdr) * 4) + UDP_HLEN);
+        LWIP_ASSERT("p->payload == iphdr", (p->payload == iphdr));
+        icmp_dest_unreach(p, ICMP_DUR_PORT);
+      }
+#endif /* LWIP_ICMP */
+      UDP_STATS_INC(udp.proterr);
+      UDP_STATS_INC(udp.drop);
+      snmp_inc_udpnoports();
+      pbuf_free(p);
+    }
+  } else {
+    pbuf_free(p);
+  }
+end:
+  PERF_STOP("udp_input");
+}
+
+/**
+ * Send data using UDP.
+ *
+ * @param pcb UDP PCB used to send the data.
+ * @param p chain of pbuf's to be sent.
+ *
+ * The datagram will be sent to the current remote_ip & remote_port
+ * stored in pcb. If the pcb is not bound to a port, it will
+ * automatically be bound to a random port.
+ *
+ * @return lwIP error code.
+ * - ERR_OK. Successful. No error occured.
+ * - ERR_MEM. Out of memory.
+ * - ERR_RTE. Could not find route to destination address.
+ * - More errors could be returned by lower protocol layers.
+ *
+ * @see udp_disconnect() udp_sendto()
+ */
+err_t
+udp_send(struct udp_pcb *pcb, struct pbuf *p)
+{
+  /* send to the packet using remote ip and port stored in the pcb */
+  return udp_sendto(pcb, p, &pcb->remote_ip, pcb->remote_port);
+}
+
+#if LWIP_CHECKSUM_ON_COPY
+/** Same as udp_send() but with checksum
+ */
+err_t
+udp_send_chksum(struct udp_pcb *pcb, struct pbuf *p,
+                u8_t have_chksum, u16_t chksum)
+{
+  /* send to the packet using remote ip and port stored in the pcb */
+  return udp_sendto_chksum(pcb, p, &pcb->remote_ip, pcb->remote_port,
+    have_chksum, chksum);
+}
+#endif /* LWIP_CHECKSUM_ON_COPY */
+
+/**
+ * Send data to a specified address using UDP.
+ *
+ * @param pcb UDP PCB used to send the data.
+ * @param p chain of pbuf's to be sent.
+ * @param dst_ip Destination IP address.
+ * @param dst_port Destination UDP port.
+ *
+ * dst_ip & dst_port are expected to be in the same byte order as in the pcb.
+ *
+ * If the PCB already has a remote address association, it will
+ * be restored after the data is sent.
+ * 
+ * @return lwIP error code (@see udp_send for possible error codes)
+ *
+ * @see udp_disconnect() udp_send()
+ */
+err_t
+udp_sendto(struct udp_pcb *pcb, struct pbuf *p,
+  ip_addr_t *dst_ip, u16_t dst_port)
+{
+#if LWIP_CHECKSUM_ON_COPY
+  return udp_sendto_chksum(pcb, p, dst_ip, dst_port, 0, 0);
+}
+
+/** Same as udp_sendto(), but with checksum */
+err_t
+udp_sendto_chksum(struct udp_pcb *pcb, struct pbuf *p, ip_addr_t *dst_ip,
+                  u16_t dst_port, u8_t have_chksum, u16_t chksum)
+{
+#endif /* LWIP_CHECKSUM_ON_COPY */
+  struct netif *netif;
+
+  LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_send\n"));
+
+  /* find the outgoing network interface for this packet */
+#if LWIP_IGMP
+  netif = ip_route((ip_addr_ismulticast(dst_ip))?(&(pcb->multicast_ip)):(dst_ip));
+#else
+  netif = ip_route(dst_ip);
+#endif /* LWIP_IGMP */
+
+  /* no outgoing network interface could be found? */
+  if (netif == NULL) {
+    LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS, ("udp_send: No route to %"U16_F".%"U16_F".%"U16_F".%"U16_F"\n",
+      ip4_addr1_16(dst_ip), ip4_addr2_16(dst_ip), ip4_addr3_16(dst_ip), ip4_addr4_16(dst_ip)));
+    UDP_STATS_INC(udp.rterr);
+    return ERR_RTE;
+  }
+#if LWIP_CHECKSUM_ON_COPY
+  return udp_sendto_if_chksum(pcb, p, dst_ip, dst_port, netif, have_chksum, chksum);
+#else /* LWIP_CHECKSUM_ON_COPY */
+  return udp_sendto_if(pcb, p, dst_ip, dst_port, netif);
+#endif /* LWIP_CHECKSUM_ON_COPY */
+}
+
+/**
+ * Send data to a specified address using UDP.
+ * The netif used for sending can be specified.
+ *
+ * This function exists mainly for DHCP, to be able to send UDP packets
+ * on a netif that is still down.
+ *
+ * @param pcb UDP PCB used to send the data.
+ * @param p chain of pbuf's to be sent.
+ * @param dst_ip Destination IP address.
+ * @param dst_port Destination UDP port.
+ * @param netif the netif used for sending.
+ *
+ * dst_ip & dst_port are expected to be in the same byte order as in the pcb.
+ *
+ * @return lwIP error code (@see udp_send for possible error codes)
+ *
+ * @see udp_disconnect() udp_send()
+ */
+err_t
+udp_sendto_if(struct udp_pcb *pcb, struct pbuf *p,
+  ip_addr_t *dst_ip, u16_t dst_port, struct netif *netif)
+{
+#if LWIP_CHECKSUM_ON_COPY
+  return udp_sendto_if_chksum(pcb, p, dst_ip, dst_port, netif, 0, 0);
+}
+
+/** Same as udp_sendto_if(), but with checksum */
+err_t
+udp_sendto_if_chksum(struct udp_pcb *pcb, struct pbuf *p, ip_addr_t *dst_ip,
+                     u16_t dst_port, struct netif *netif, u8_t have_chksum,
+                     u16_t chksum)
+{
+#endif /* LWIP_CHECKSUM_ON_COPY */
+  struct udp_hdr *udphdr;
+  ip_addr_t *src_ip;
+  err_t err;
+  struct pbuf *q; /* q will be sent down the stack */
+
+#if IP_SOF_BROADCAST
+  /* broadcast filter? */
+  if ( ((pcb->so_options & SOF_BROADCAST) == 0) && ip_addr_isbroadcast(dst_ip, netif) ) {
+    LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
+      ("udp_sendto_if: SOF_BROADCAST not enabled on pcb %p\n", (void *)pcb));
+    return ERR_VAL;
+  }
+#endif /* IP_SOF_BROADCAST */
+
+  /* if the PCB is not yet bound to a port, bind it here */
+  if (pcb->local_port == 0) {
+    LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_send: not yet bound to a port, binding now\n"));
+    err = udp_bind(pcb, &pcb->local_ip, pcb->local_port);
+    if (err != ERR_OK) {
+      LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_LEVEL_SERIOUS, ("udp_send: forced port bind failed\n"));
+      return err;
+    }
+  }
+
+  /* not enough space to add an UDP header to first pbuf in given p chain? */
+  if (pbuf_header(p, UDP_HLEN)) {
+    /* allocate header in a separate new pbuf */
+    q = pbuf_alloc(PBUF_IP, UDP_HLEN, PBUF_RAM);
+    /* new header pbuf could not be allocated? */
+    if (q == NULL) {
+      LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_LEVEL_SERIOUS, ("udp_send: could not allocate header\n"));
+      return ERR_MEM;
+    }
+    /* chain header q in front of given pbuf p */
+    pbuf_chain(q, p);
+    /* first pbuf q points to header pbuf */
+    LWIP_DEBUGF(UDP_DEBUG,
+                ("udp_send: added header pbuf %p before given pbuf %p\n", (void *)q, (void *)p));
+  } else {
+    /* adding space for header within p succeeded */
+    /* first pbuf q equals given pbuf */
+    q = p;
+    LWIP_DEBUGF(UDP_DEBUG, ("udp_send: added header in given pbuf %p\n", (void *)p));
+  }
+  LWIP_ASSERT("check that first pbuf can hold struct udp_hdr",
+              (q->len >= sizeof(struct udp_hdr)));
+  /* q now represents the packet to be sent */
+  udphdr = (struct udp_hdr *)q->payload;
+  udphdr->src = htons(pcb->local_port);
+  udphdr->dest = htons(dst_port);
+  /* in UDP, 0 checksum means 'no checksum' */
+  udphdr->chksum = 0x0000; 
+
+  /* Multicast Loop? */
+#if LWIP_IGMP
+  if (ip_addr_ismulticast(dst_ip) && ((pcb->flags & UDP_FLAGS_MULTICAST_LOOP) != 0)) {
+    q->flags |= PBUF_FLAG_MCASTLOOP;
+  }
+#endif /* LWIP_IGMP */
+
+
+  /* PCB local address is IP_ANY_ADDR? */
+  if (ip_addr_isany(&pcb->local_ip)) {
+    /* use outgoing network interface IP address as source address */
+    src_ip = &(netif->ip_addr);
+  } else {
+    /* check if UDP PCB local IP address is correct
+     * this could be an old address if netif->ip_addr has changed */
+    if (!ip_addr_cmp(&(pcb->local_ip), &(netif->ip_addr))) {
+      /* local_ip doesn't match, drop the packet */
+      if (q != p) {
+        /* free the header pbuf */
+        pbuf_free(q);
+        q = NULL;
+        /* p is still referenced by the caller, and will live on */
+      }
+      return ERR_VAL;
+    }
+    /* use UDP PCB local IP address as source address */
+    src_ip = &(pcb->local_ip);
+  }
+
+  LWIP_DEBUGF(UDP_DEBUG, ("udp_send: sending datagram of length %"U16_F"\n", q->tot_len));
+
+#if LWIP_UDPLITE
+  /* UDP Lite protocol? */
+  if (pcb->flags & UDP_FLAGS_UDPLITE) {
+    u16_t chklen, chklen_hdr;
+    LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP LITE packet length %"U16_F"\n", q->tot_len));
+    /* set UDP message length in UDP header */
+    chklen_hdr = chklen = pcb->chksum_len_tx;
+    if ((chklen < sizeof(struct udp_hdr)) || (chklen > q->tot_len)) {
+      if (chklen != 0) {
+        LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP LITE pcb->chksum_len is illegal: %"U16_F"\n", chklen));
+      }
+      /* For UDP-Lite, checksum length of 0 means checksum
+         over the complete packet. (See RFC 3828 chap. 3.1)
+         At least the UDP-Lite header must be covered by the
+         checksum, therefore, if chksum_len has an illegal
+         value, we generate the checksum over the complete
+         packet to be safe. */
+      chklen_hdr = 0;
+      chklen = q->tot_len;
+    }
+    udphdr->len = htons(chklen_hdr);
+    /* calculate checksum */
+#if CHECKSUM_GEN_UDP
+    udphdr->chksum = inet_chksum_pseudo_partial(q, src_ip, dst_ip,
+      IP_PROTO_UDPLITE, q->tot_len,
+#if !LWIP_CHECKSUM_ON_COPY
+      chklen);
+#else /* !LWIP_CHECKSUM_ON_COPY */
+      (have_chksum ? UDP_HLEN : chklen));
+    if (have_chksum) {
+      u32_t acc;
+      acc = udphdr->chksum + (u16_t)~(chksum);
+      udphdr->chksum = FOLD_U32T(acc);
+    }
+#endif /* !LWIP_CHECKSUM_ON_COPY */
+
+    /* chksum zero must become 0xffff, as zero means 'no checksum' */
+    if (udphdr->chksum == 0x0000) {
+      udphdr->chksum = 0xffff;
+    }
+#endif /* CHECKSUM_GEN_UDP */
+    /* output to IP */
+    LWIP_DEBUGF(UDP_DEBUG, ("udp_send: ip_output_if (,,,,IP_PROTO_UDPLITE,)\n"));
+#if LWIP_NETIF_HWADDRHINT
+    netif->addr_hint = &(pcb->addr_hint);
+#endif /* LWIP_NETIF_HWADDRHINT*/
+    err = ip_output_if(q, src_ip, dst_ip, pcb->ttl, pcb->tos, IP_PROTO_UDPLITE, netif);
+#if LWIP_NETIF_HWADDRHINT
+    netif->addr_hint = NULL;
+#endif /* LWIP_NETIF_HWADDRHINT*/
+  } else
+#endif /* LWIP_UDPLITE */
+  {      /* UDP */
+    LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP packet length %"U16_F"\n", q->tot_len));
+    udphdr->len = htons(q->tot_len);
+    /* calculate checksum */
+#if CHECKSUM_GEN_UDP
+    if ((pcb->flags & UDP_FLAGS_NOCHKSUM) == 0) {
+      u16_t udpchksum;
+#if LWIP_CHECKSUM_ON_COPY
+      if (have_chksum) {
+        u32_t acc;
+        udpchksum = inet_chksum_pseudo_partial(q, src_ip, dst_ip, IP_PROTO_UDP,
+          q->tot_len, UDP_HLEN);
+        acc = udpchksum + (u16_t)~(chksum);
+        udpchksum = FOLD_U32T(acc);
+      } else
+#endif /* LWIP_CHECKSUM_ON_COPY */
+      {
+        udpchksum = inet_chksum_pseudo(q, src_ip, dst_ip, IP_PROTO_UDP, q->tot_len);
+      }
+
+      /* chksum zero must become 0xffff, as zero means 'no checksum' */
+      if (udpchksum == 0x0000) {
+        udpchksum = 0xffff;
+      }
+      udphdr->chksum = udpchksum;
+    }
+#endif /* CHECKSUM_GEN_UDP */
+    LWIP_DEBUGF(UDP_DEBUG, ("udp_send: UDP checksum 0x%04"X16_F"\n", udphdr->chksum));
+    LWIP_DEBUGF(UDP_DEBUG, ("udp_send: ip_output_if (,,,,IP_PROTO_UDP,)\n"));
+    /* output to IP */
+#if LWIP_NETIF_HWADDRHINT
+    netif->addr_hint = &(pcb->addr_hint);
+#endif /* LWIP_NETIF_HWADDRHINT*/
+    err = ip_output_if(q, src_ip, dst_ip, pcb->ttl, pcb->tos, IP_PROTO_UDP, netif);
+#if LWIP_NETIF_HWADDRHINT
+    netif->addr_hint = NULL;
+#endif /* LWIP_NETIF_HWADDRHINT*/
+  }
+  /* TODO: must this be increased even if error occured? */
+  snmp_inc_udpoutdatagrams();
+
+  /* did we chain a separate header pbuf earlier? */
+  if (q != p) {
+    /* free the header pbuf */
+    pbuf_free(q);
+    q = NULL;
+    /* p is still referenced by the caller, and will live on */
+  }
+
+  UDP_STATS_INC(udp.xmit);
+  return err;
+}
+
+/**
+ * Bind an UDP PCB.
+ *
+ * @param pcb UDP PCB to be bound with a local address ipaddr and port.
+ * @param ipaddr local IP address to bind with. Use IP_ADDR_ANY to
+ * bind to all local interfaces.
+ * @param port local UDP port to bind with. Use 0 to automatically bind
+ * to a random port between UDP_LOCAL_PORT_RANGE_START and
+ * UDP_LOCAL_PORT_RANGE_END.
+ *
+ * ipaddr & port are expected to be in the same byte order as in the pcb.
+ *
+ * @return lwIP error code.
+ * - ERR_OK. Successful. No error occured.
+ * - ERR_USE. The specified ipaddr and port are already bound to by
+ * another UDP PCB.
+ *
+ * @see udp_disconnect()
+ */
+err_t
+udp_bind(struct udp_pcb *pcb, ip_addr_t *ipaddr, u16_t port)
+{
+  struct udp_pcb *ipcb;
+  u8_t rebind;
+
+  LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, ("udp_bind(ipaddr = "));
+  ip_addr_debug_print(UDP_DEBUG, ipaddr);
+  LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE, (", port = %"U16_F")\n", port));
+
+  rebind = 0;
+  /* Check for double bind and rebind of the same pcb */
+  for (ipcb = udp_pcbs; ipcb != NULL; ipcb = ipcb->next) {
+    /* is this UDP PCB already on active list? */
+    if (pcb == ipcb) {
+      /* pcb may occur at most once in active list */
+      LWIP_ASSERT("rebind == 0", rebind == 0);
+      /* pcb already in list, just rebind */
+      rebind = 1;
+    }
+
+    /* By default, we don't allow to bind to a port that any other udp
+       PCB is alread bound to, unless *all* PCBs with that port have tha
+       REUSEADDR flag set. */
+#if SO_REUSE
+    else if (((pcb->so_options & SOF_REUSEADDR) == 0) &&
+             ((ipcb->so_options & SOF_REUSEADDR) == 0)) {
+#else /* SO_REUSE */
+    /* port matches that of PCB in list and REUSEADDR not set -> reject */
+    else {
+#endif /* SO_REUSE */
+      if ((ipcb->local_port == port) &&
+          /* IP address matches, or one is IP_ADDR_ANY? */
+          (ip_addr_isany(&(ipcb->local_ip)) ||
+           ip_addr_isany(ipaddr) ||
+           ip_addr_cmp(&(ipcb->local_ip), ipaddr))) {
+        /* other PCB already binds to this local IP and port */
+        LWIP_DEBUGF(UDP_DEBUG,
+                    ("udp_bind: local port %"U16_F" already bound by another pcb\n", port));
+        return ERR_USE;
+      }
+    }
+  }
+
+  ip_addr_set(&pcb->local_ip, ipaddr);
+
+  /* no port specified? */
+  if (port == 0) {
+#ifndef UDP_LOCAL_PORT_RANGE_START
+#define UDP_LOCAL_PORT_RANGE_START 4096
+#define UDP_LOCAL_PORT_RANGE_END   0x7fff
+#endif
+    port = UDP_LOCAL_PORT_RANGE_START;
+    ipcb = udp_pcbs;
+    while ((ipcb != NULL) && (port != UDP_LOCAL_PORT_RANGE_END)) {
+      if (ipcb->local_port == port) {
+        /* port is already used by another udp_pcb */
+        port++;
+        /* restart scanning all udp pcbs */
+        ipcb = udp_pcbs;
+      } else {
+        /* go on with next udp pcb */
+        ipcb = ipcb->next;
+      }
+    }
+    if (ipcb != NULL) {
+      /* no more ports available in local range */
+      LWIP_DEBUGF(UDP_DEBUG, ("udp_bind: out of free UDP ports\n"));
+      return ERR_USE;
+    }
+  }
+  pcb->local_port = port;
+  snmp_insert_udpidx_tree(pcb);
+  /* pcb not active yet? */
+  if (rebind == 0) {
+    /* place the PCB on the active list if not already there */
+    pcb->next = udp_pcbs;
+    udp_pcbs = pcb;
+  }
+  LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE,
+              ("udp_bind: bound to %"U16_F".%"U16_F".%"U16_F".%"U16_F", port %"U16_F"\n",
+               ip4_addr1_16(&pcb->local_ip), ip4_addr2_16(&pcb->local_ip),
+               ip4_addr3_16(&pcb->local_ip), ip4_addr4_16(&pcb->local_ip),
+               pcb->local_port));
+  return ERR_OK;
+}
+/**
+ * Connect an UDP PCB.
+ *
+ * This will associate the UDP PCB with the remote address.
+ *
+ * @param pcb UDP PCB to be connected with remote address ipaddr and port.
+ * @param ipaddr remote IP address to connect with.
+ * @param port remote UDP port to connect with.
+ *
+ * @return lwIP error code
+ *
+ * ipaddr & port are expected to be in the same byte order as in the pcb.
+ *
+ * The udp pcb is bound to a random local port if not already bound.
+ *
+ * @see udp_disconnect()
+ */
+err_t
+udp_connect(struct udp_pcb *pcb, ip_addr_t *ipaddr, u16_t port)
+{
+  struct udp_pcb *ipcb;
+
+  if (pcb->local_port == 0) {
+    err_t err = udp_bind(pcb, &pcb->local_ip, pcb->local_port);
+    if (err != ERR_OK) {
+      return err;
+    }
+  }
+
+  ip_addr_set(&pcb->remote_ip, ipaddr);
+  pcb->remote_port = port;
+  pcb->flags |= UDP_FLAGS_CONNECTED;
+/** TODO: this functionality belongs in upper layers */
+#ifdef LWIP_UDP_TODO
+  /* Nail down local IP for netconn_addr()/getsockname() */
+  if (ip_addr_isany(&pcb->local_ip) && !ip_addr_isany(&pcb->remote_ip)) {
+    struct netif *netif;
+
+    if ((netif = ip_route(&(pcb->remote_ip))) == NULL) {
+      LWIP_DEBUGF(UDP_DEBUG, ("udp_connect: No route to 0x%lx\n", pcb->remote_ip.addr));
+      UDP_STATS_INC(udp.rterr);
+      return ERR_RTE;
+    }
+    /** TODO: this will bind the udp pcb locally, to the interface which
+        is used to route output packets to the remote address. However, we
+        might want to accept incoming packets on any interface! */
+    pcb->local_ip = netif->ip_addr;
+  } else if (ip_addr_isany(&pcb->remote_ip)) {
+    pcb->local_ip.addr = 0;
+  }
+#endif
+  LWIP_DEBUGF(UDP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE,
+              ("udp_connect: connected to %"U16_F".%"U16_F".%"U16_F".%"U16_F",port %"U16_F"\n",
+               ip4_addr1_16(&pcb->local_ip), ip4_addr2_16(&pcb->local_ip),
+               ip4_addr3_16(&pcb->local_ip), ip4_addr4_16(&pcb->local_ip),
+               pcb->local_port));
+
+  /* Insert UDP PCB into the list of active UDP PCBs. */
+  for (ipcb = udp_pcbs; ipcb != NULL; ipcb = ipcb->next) {
+    if (pcb == ipcb) {
+      /* already on the list, just return */
+      return ERR_OK;
+    }
+  }
+  /* PCB not yet on the list, add PCB now */
+  pcb->next = udp_pcbs;
+  udp_pcbs = pcb;
+  return ERR_OK;
+}
+
+/**
+ * Disconnect a UDP PCB
+ *
+ * @param pcb the udp pcb to disconnect.
+ */
+void
+udp_disconnect(struct udp_pcb *pcb)
+{
+  /* reset remote address association */
+  ip_addr_set_any(&pcb->remote_ip);
+  pcb->remote_port = 0;
+  /* mark PCB as unconnected */
+  pcb->flags &= ~UDP_FLAGS_CONNECTED;
+}
+
+/**
+ * Set a receive callback for a UDP PCB
+ *
+ * This callback will be called when receiving a datagram for the pcb.
+ *
+ * @param pcb the pcb for wich to set the recv callback
+ * @param recv function pointer of the callback function
+ * @param recv_arg additional argument to pass to the callback function
+ */
+void
+udp_recv(struct udp_pcb *pcb, udp_recv_fn recv, void *recv_arg)
+{
+  /* remember recv() callback and user data */
+  pcb->recv = recv;
+  pcb->recv_arg = recv_arg;
+}
+
+/**
+ * Remove an UDP PCB.
+ *
+ * @param pcb UDP PCB to be removed. The PCB is removed from the list of
+ * UDP PCB's and the data structure is freed from memory.
+ *
+ * @see udp_new()
+ */
+void
+udp_remove(struct udp_pcb *pcb)
+{
+  struct udp_pcb *pcb2;
+
+  snmp_delete_udpidx_tree(pcb);
+  /* pcb to be removed is first in list? */
+  if (udp_pcbs == pcb) {
+    /* make list start at 2nd pcb */
+    udp_pcbs = udp_pcbs->next;
+    /* pcb not 1st in list */
+  } else {
+    for (pcb2 = udp_pcbs; pcb2 != NULL; pcb2 = pcb2->next) {
+      /* find pcb in udp_pcbs list */
+      if (pcb2->next != NULL && pcb2->next == pcb) {
+        /* remove pcb from list */
+        pcb2->next = pcb->next;
+      }
+    }
+  }
+  memp_free(MEMP_UDP_PCB, pcb);
+}
+
+/**
+ * Create a UDP PCB.
+ *
+ * @return The UDP PCB which was created. NULL if the PCB data structure
+ * could not be allocated.
+ *
+ * @see udp_remove()
+ */
+struct udp_pcb *
+udp_new(void)
+{
+  struct udp_pcb *pcb;
+  pcb = (struct udp_pcb *)memp_malloc(MEMP_UDP_PCB);
+  /* could allocate UDP PCB? */
+  if (pcb != NULL) {
+    /* UDP Lite: by initializing to all zeroes, chksum_len is set to 0
+     * which means checksum is generated over the whole datagram per default
+     * (recommended as default by RFC 3828). */
+    /* initialize PCB to all zeroes */
+    memset(pcb, 0, sizeof(struct udp_pcb));
+    pcb->ttl = UDP_TTL;
+  }
+  return pcb;
+}
+
+#if UDP_DEBUG
+/**
+ * Print UDP header information for debug purposes.
+ *
+ * @param udphdr pointer to the udp header in memory.
+ */
+void
+udp_debug_print(struct udp_hdr *udphdr)
+{
+  LWIP_DEBUGF(UDP_DEBUG, ("UDP header:\n"));
+  LWIP_DEBUGF(UDP_DEBUG, ("+-------------------------------+\n"));
+  LWIP_DEBUGF(UDP_DEBUG, ("|     %5"U16_F"     |     %5"U16_F"     | (src port, dest port)\n",
+                          ntohs(udphdr->src), ntohs(udphdr->dest)));
+  LWIP_DEBUGF(UDP_DEBUG, ("+-------------------------------+\n"));
+  LWIP_DEBUGF(UDP_DEBUG, ("|     %5"U16_F"     |     0x%04"X16_F"    | (len, chksum)\n",
+                          ntohs(udphdr->len), ntohs(udphdr->chksum)));
+  LWIP_DEBUGF(UDP_DEBUG, ("+-------------------------------+\n"));
+}
+#endif /* UDP_DEBUG */
+
+#endif /* LWIP_UDP */