File content as of revision 103:493a29d2d4d7:

/* mbed Microcontroller Library
 *******************************************************************************
 * Copyright (c) 2014, STMicroelectronics
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

// MODE (see GPIOMode_TypeDef structure)
// OTYPE (see GPIOOType_TypeDef structure)
// PUPD (see GPIOPuPd_TypeDef structure)
// AFNUM (see AF_mapping constant table, 0xFF is not used)
#define STM_PIN_DATA(MODE, OTYPE, PUPD, AFNUM)  (((AFNUM)<<8)|((PUPD)<<4)|((OTYPE)<<2)|((MODE)<<0))
#define STM_PIN_MODE(X)   (((X)>>0) & 0x3)
#define STM_PIN_OTYPE(X)  (((X)>>2) & 0x1)
#define STM_PIN_PUPD(X)   (((X)>>4) & 0x3)
#define STM_PIN_AFNUM(X)  (((X)>>8) & 0xF)

// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble  = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X)  ((uint32_t)(X) & 0xF)

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

typedef enum {
    PA_0  = 0x00,
    PA_1  = 0x01,
    PA_2  = 0x02,
    PA_3  = 0x03,
    PA_4  = 0x04,
    PA_5  = 0x05,
    PA_6  = 0x06,
    PA_7  = 0x07,
    PA_8  = 0x08,
    PA_9  = 0x09,
    PA_10 = 0x0A,
    PA_11 = 0x0B,
    PA_12 = 0x0C,
    PA_13 = 0x0D,
    PA_14 = 0x0E,
    PA_15 = 0x0F,

    PB_0  = 0x10,
    PB_1  = 0x11,
    PB_2  = 0x12,
    PB_3  = 0x13,
    PB_4  = 0x14,
    PB_5  = 0x15,
    PB_6  = 0x16,
    PB_7  = 0x17,
    PB_8  = 0x18,
    PB_9  = 0x19,
    PB_10 = 0x1A,
    PB_11 = 0x1B,
    PB_12 = 0x1C,
    PB_13 = 0x1D,
    PB_14 = 0x1E,
    PB_15 = 0x1F,

    PC_0  = 0x20,
    PC_1  = 0x21,
    PC_2  = 0x22,
    PC_3  = 0x23,
    PC_4  = 0x24,
    PC_5  = 0x25,
    PC_6  = 0x26,
    PC_7  = 0x27,
    PC_8  = 0x28,
    PC_9  = 0x29,
    PC_10 = 0x2A,
    PC_11 = 0x2B,
    PC_12 = 0x2C,
    PC_13 = 0x2D,
    PC_14 = 0x2E,
    PC_15 = 0x2F,

    PD_0  = 0x30,
    PD_1  = 0x31,
    PD_2  = 0x32,
    PD_3  = 0x33,
    PD_4  = 0x34,
    PD_5  = 0x35,
    PD_6  = 0x36,
    PD_7  = 0x37,
    PD_8  = 0x38,
    PD_9  = 0x39,
    PD_10 = 0x3A,
    PD_11 = 0x3B,
    PD_12 = 0x3C,
    PD_13 = 0x3D,
    PD_14 = 0x3E,
    PD_15 = 0x3F,

    PE_0  = 0x40,
    PE_1  = 0x41,
    PE_2  = 0x42,
    PE_3  = 0x43,
    PE_4  = 0x44,
    PE_5  = 0x45,
    PE_6  = 0x46,
    PE_7  = 0x47,
    PE_8  = 0x48,
    PE_9  = 0x49,
    PE_10 = 0x4A,
    PE_11 = 0x4B,
    PE_12 = 0x4C,
    PE_13 = 0x4D,
    PE_14 = 0x4E,
    PE_15 = 0x4F,

    PF_0  = 0x50,
    PF_1  = 0x51,
    PF_2  = 0x52,
    PF_3  = 0x53,
    PF_4  = 0x54,
    PF_5  = 0x55,
    PF_6  = 0x56,
    PF_7  = 0x57,
    PF_8  = 0x58,
    PF_9  = 0x59,
    PF_10 = 0x5A,
    PF_11 = 0x5B,
    PF_12 = 0x5C,
    PF_13 = 0x5D,
    PF_14 = 0x5E,
    PF_15 = 0x5F,

    LED1  = PE_9,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

typedef enum {
    PullNone  = 0,
    PullUp    = 1,
    PullDown  = 2,
    OpenDrain = 3,
    PullDefault = PullNone
} PinMode;

#ifdef __cplusplus
}
#endif

#endif