Wataru Wakutsu
extend
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: public/BLE.h
- Revision:
- 539:0b6e82025358
- Parent:
- 538:fff02872b62f
- Child:
- 540:1fb1e0b809eb
diff -r fff02872b62f -r 0b6e82025358 public/BLE.h
--- a/public/BLE.h Fri Jun 19 15:52:08 2015 +0100
+++ b/public/BLE.h Fri Jun 19 15:52:08 2015 +0100
@@ -96,6 +96,26 @@
transport->waitForEvent();
}
+ /**
+ * Enable the BLE stack's Security Manager. The Security Manager implements
+ * the actual cryptographic algorithms and protocol exchanges that allow two
+ * devices to securely exchange data and privately detect each other.
+ * Calling this API is a prerequisite for encryption and pairing (bonding).
+ *
+ * @param[in] enableBonding Allow for bonding.
+ * @param[in] requireMITM Require protection for man-in-the-middle attacks.
+ * @param[in] iocaps To specify IO capabilities of this peripheral,
+ * such as availability of a display or keyboard to
+ * support out-of-band exchanges of security data.
+ * @param[in] passkey To specify a static passkey.
+ *
+ * @return BLE_ERROR_NONE on success.
+ */
+ ble_error_t initializeSecurity(bool enableBonding = true,
+ bool requireMITM = true,
+ Gap::SecurityIOCapabilities_t iocaps = Gap::IO_CAPS_NONE,
+ const Gap::Passkey_t passkey = NULL);
+
/*
* Deprecation alert!
* All of the following are deprecated and may be dropped in a future
@@ -920,53 +940,134 @@
/**
* Add a service declaration to the local server ATT table. Also add the
* characteristics contained within.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.addService() should be replaced with
+ * ble.gattServer().addService().
*/
- ble_error_t addService(GattService &service);
+ ble_error_t addService(GattService &service) {
+ return gattServer().addService(service);
+ }
+
+ /**
+ * Read the value of a characteristic from the local GattServer
+ * @param[in] attributeHandle
+ * Attribute handle for the value attribute of the characteristic.
+ * @param[out] buffer
+ * A buffer to hold the value being read.
+ * @param[in/out] lengthP
+ * Length of the buffer being supplied. If the attribute
+ * value is longer than the size of the supplied buffer,
+ * this variable will hold upon return the total attribute value length
+ * (excluding offset). The application may use this
+ * information to allocate a suitable buffer size.
+ *
+ * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.readCharacteristicValue() should be replaced with
+ * ble.gattServer().read().
+ */
+ ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
+ return gattServer().read(attributeHandle, buffer, lengthP);
+ }
/**
- * @param[in/out] lengthP
- * input: Length in bytes to be read,
- * output: Total length of attribute value upon successful return.
+ * Read the value of a characteristic from the local GattServer
+ * @param[in] connectionHandle
+ * Connection Handle.
+ * @param[in] attributeHandle
+ * Attribute handle for the value attribute of the characteristic.
+ * @param[out] buffer
+ * A buffer to hold the value being read.
+ * @param[in/out] lengthP
+ * Length of the buffer being supplied. If the attribute
+ * value is longer than the size of the supplied buffer,
+ * this variable will hold upon return the total attribute value length
+ * (excluding offset). The application may use this
+ * information to allocate a suitable buffer size.
+ *
+ * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
+ *
+ * @note This API is a version of above with an additional connection handle
+ * parameter to allow fetches for connection-specific multivalued
+ * attribtues (such as the CCCDs).
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.readCharacteristicValue() should be replaced with
+ * ble.gattServer().read().
*/
- ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP);
- /**
- * A version of the same as above with connection handle parameter to allow fetches for connection-specific multivalued attribtues (such as the CCCDs).
- */
- ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP);
+ ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
+ return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
+ }
/**
- * @param localOnly
- * Only update the characteristic locally regardless of notify/indicate flags in the CCCD.
+ * Update the value of a characteristic on the local GattServer.
+ *
+ * @param[in] attributeHandle
+ * Handle for the value attribute of the Characteristic.
+ * @param[in] value
+ * A pointer to a buffer holding the new value
+ * @param[in] size
+ * Size of the new value (in bytes).
+ * @param[in] localOnly
+ * Should this update be kept on the local
+ * GattServer regardless of the state of the
+ * notify/indicate flag in the CCCD for this
+ * Characteristic? If set to true, no notification
+ * or indication is generated.
+ *
+ * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.updateCharacteristicValue() should be replaced with
+ * ble.gattServer().write().
*/
- ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false);
+ ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
+ const uint8_t *value,
+ uint16_t size,
+ bool localOnly = false) {
+ return gattServer().write(attributeHandle, value, size, localOnly);
+ }
+
/**
- * A version of the same as above with connection handle parameter to allow updates for connection-specific multivalued attribtues (such as the CCCDs).
+ * Update the value of a characteristic on the local GattServer. A version
+ * of the same as above with connection handle parameter to allow updates
+ * for connection-specific multivalued attribtues (such as the CCCDs).
+ *
+ * @param[in] connectionHandle
+ * Connection Handle.
+ * @param[in] attributeHandle
+ * Handle for the value attribute of the Characteristic.
+ * @param[in] value
+ * A pointer to a buffer holding the new value
+ * @param[in] size
+ * Size of the new value (in bytes).
+ * @param[in] localOnly
+ * Should this update be kept on the local
+ * GattServer regardless of the state of the
+ * notify/indicate flag in the CCCD for this
+ * Characteristic? If set to true, no notification
+ * or indication is generated.
+ *
+ * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from GattServer directly. A former call
+ * to ble.updateCharacteristicValue() should be replaced with
+ * ble.gattServer().write().
*/
ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
GattAttribute::Handle_t attributeHandle,
const uint8_t *value,
uint16_t size,
- bool localOnly = false);
-
- /**
- * Enable the BLE stack's Security Manager. The Security Manager implements
- * the actual cryptographic algorithms and protocol exchanges that allow two
- * devices to securely exchange data and privately detect each other.
- * Calling this API is a prerequisite for encryption and pairing (bonding).
- *
- * @param[in] enableBonding Allow for bonding.
- * @param[in] requireMITM Require protection for man-in-the-middle attacks.
- * @param[in] iocaps To specify IO capabilities of this peripheral,
- * such as availability of a display or keyboard to
- * support out-of-band exchanges of security data.
- * @param[in] passkey To specify a static passkey.
- *
- * @return BLE_ERROR_NONE on success.
- */
- ble_error_t initializeSecurity(bool enableBonding = true,
- bool requireMITM = true,
- Gap::SecurityIOCapabilities_t iocaps = Gap::IO_CAPS_NONE,
- const Gap::Passkey_t passkey = NULL);
+ bool localOnly = false) {
+ return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
+ }
/**
* Setup a callback for when the security setup procedure (key generation
@@ -1196,43 +1297,6 @@
}
inline ble_error_t
-BLE::addService(GattService &service)
-{
- return transport->getGattServer().addService(service);
-}
-
-inline ble_error_t
-BLE::readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP)
-{
- return transport->getGattServer().readValue(attributeHandle, buffer, lengthP);
-}
-
-inline ble_error_t
-BLE::readCharacteristicValue(Gap::Handle_t connectionHandle,
- GattAttribute::Handle_t attributeHandle,
- uint8_t *buffer,
- uint16_t *lengthP)
-{
- return transport->getGattServer().readValue(connectionHandle, attributeHandle, buffer, lengthP);
-}
-
-inline ble_error_t
-BLE::updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly)
-{
- return transport->getGattServer().updateValue(attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
-}
-
-inline ble_error_t
-BLE::updateCharacteristicValue(Gap::Handle_t connectionHandle,
- GattAttribute::Handle_t attributeHandle,
- const uint8_t *value,
- uint16_t size,
- bool localOnly)
-{
- return transport->getGattServer().updateValue(connectionHandle, attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
-}
-
-inline ble_error_t
BLE::initializeSecurity(bool enableBonding,
bool requireMITM,
Gap::SecurityIOCapabilities_t iocaps,