extend
Fork of BLE_API by
ble/GattCharacteristic.h
- Committer:
- rgrover1
- Date:
- 2015-12-02
- Revision:
- 1008:c27e0c6f1f38
- Parent:
- 1006:76ae9bbf173f
- Child:
- 1011:317d3b25018e
File content as of revision 1008:c27e0c6f1f38:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __GATT_CHARACTERISTIC_H__ #define __GATT_CHARACTERISTIC_H__ #include "Gap.h" #include "SecurityManager.h" #include "GattAttribute.h" #include "GattCallbackParamTypes.h" #include "FunctionPointerWithContext.h" class GattCharacteristic { public: enum { UUID_BATTERY_LEVEL_STATE_CHAR = 0x2A1B, UUID_BATTERY_POWER_STATE_CHAR = 0x2A1A, UUID_REMOVABLE_CHAR = 0x2A3A, UUID_SERVICE_REQUIRED_CHAR = 0x2A3B, UUID_ALERT_CATEGORY_ID_CHAR = 0x2A43, UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR = 0x2A42, UUID_ALERT_LEVEL_CHAR = 0x2A06, UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR = 0x2A44, UUID_ALERT_STATUS_CHAR = 0x2A3F, UUID_BATTERY_LEVEL_CHAR = 0x2A19, UUID_BLOOD_PRESSURE_FEATURE_CHAR = 0x2A49, UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR = 0x2A35, UUID_BODY_SENSOR_LOCATION_CHAR = 0x2A38, UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR = 0x2A22, UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR = 0x2A32, UUID_BOOT_MOUSE_INPUT_REPORT_CHAR = 0x2A33, UUID_CURRENT_TIME_CHAR = 0x2A2B, UUID_DATE_TIME_CHAR = 0x2A08, UUID_DAY_DATE_TIME_CHAR = 0x2A0A, UUID_DAY_OF_WEEK_CHAR = 0x2A09, UUID_DST_OFFSET_CHAR = 0x2A0D, UUID_EXACT_TIME_256_CHAR = 0x2A0C, UUID_FIRMWARE_REVISION_STRING_CHAR = 0x2A26, UUID_GLUCOSE_FEATURE_CHAR = 0x2A51, UUID_GLUCOSE_MEASUREMENT_CHAR = 0x2A18, UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR = 0x2A34, UUID_HARDWARE_REVISION_STRING_CHAR = 0x2A27, UUID_HEART_RATE_CONTROL_POINT_CHAR = 0x2A39, UUID_HEART_RATE_MEASUREMENT_CHAR = 0x2A37, UUID_HID_CONTROL_POINT_CHAR = 0x2A4C, UUID_HID_INFORMATION_CHAR = 0x2A4A, UUID_HUMIDITY_CHAR = 0x2A6F, UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR = 0x2A2A, UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR = 0x2A36, UUID_INTERMEDIATE_TEMPERATURE_CHAR = 0x2A1E, UUID_LOCAL_TIME_INFORMATION_CHAR = 0x2A0F, UUID_MANUFACTURER_NAME_STRING_CHAR = 0x2A29, UUID_MEASUREMENT_INTERVAL_CHAR = 0x2A21, UUID_MODEL_NUMBER_STRING_CHAR = 0x2A24, UUID_UNREAD_ALERT_CHAR = 0x2A45, UUID_NEW_ALERT_CHAR = 0x2A46, UUID_PNP_ID_CHAR = 0x2A50, UUID_PRESSURE_CHAR = 0x2A6D, UUID_PROTOCOL_MODE_CHAR = 0x2A4E, UUID_RECORD_ACCESS_CONTROL_POINT_CHAR = 0x2A52, UUID_REFERENCE_TIME_INFORMATION_CHAR = 0x2A14, UUID_REPORT_CHAR = 0x2A4D, UUID_REPORT_MAP_CHAR = 0x2A4B, UUID_RINGER_CONTROL_POINT_CHAR = 0x2A40, UUID_RINGER_SETTING_CHAR = 0x2A41, UUID_SCAN_INTERVAL_WINDOW_CHAR = 0x2A4F, UUID_SCAN_REFRESH_CHAR = 0x2A31, UUID_SERIAL_NUMBER_STRING_CHAR = 0x2A25, UUID_SOFTWARE_REVISION_STRING_CHAR = 0x2A28, UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR = 0x2A47, UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR = 0x2A48, UUID_SYSTEM_ID_CHAR = 0x2A23, UUID_TEMPERATURE_CHAR = 0x2A6E, UUID_TEMPERATURE_MEASUREMENT_CHAR = 0x2A1C, UUID_TEMPERATURE_TYPE_CHAR = 0x2A1D, UUID_TIME_ACCURACY_CHAR = 0x2A12, UUID_TIME_SOURCE_CHAR = 0x2A13, UUID_TIME_UPDATE_CONTROL_POINT_CHAR = 0x2A16, UUID_TIME_UPDATE_STATE_CHAR = 0x2A17, UUID_TIME_WITH_DST_CHAR = 0x2A11, UUID_TIME_ZONE_CHAR = 0x2A0E, UUID_TX_POWER_LEVEL_CHAR = 0x2A07, UUID_CSC_FEATURE_CHAR = 0x2A5C, UUID_CSC_MEASUREMENT_CHAR = 0x2A5B, UUID_RSC_FEATURE_CHAR = 0x2A54, UUID_RSC_MEASUREMENT_CHAR = 0x2A53 }; /**************************************************************************/ /*! \brief Standard GATT characteristic presentation format unit types. These unit types are used to describe what the raw numeric data in a characteristic actually represents. \note See https://developer.bluetooth.org/gatt/units/Pages/default.aspx */ /**************************************************************************/ enum { BLE_GATT_UNIT_NONE = 0x2700, /**< No specified unit type. */ BLE_GATT_UNIT_LENGTH_METRE = 0x2701, /**< Length, metre. */ BLE_GATT_UNIT_MASS_KILOGRAM = 0x2702, /**< Mass, kilogram. */ BLE_GATT_UNIT_TIME_SECOND = 0x2703, /**< Time, second. */ BLE_GATT_UNIT_ELECTRIC_CURRENT_AMPERE = 0x2704, /**< Electric current, ampere. */ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_KELVIN = 0x2705, /**< Thermodynamic temperature, kelvin. */ BLE_GATT_UNIT_AMOUNT_OF_SUBSTANCE_MOLE = 0x2706, /**< Amount of substance, mole. */ BLE_GATT_UNIT_LUMINOUS_INTENSITY_CANDELA = 0x2707, /**< Luminous intensity, candela. */ BLE_GATT_UNIT_AREA_SQUARE_METRES = 0x2710, /**< Area, square metres. */ BLE_GATT_UNIT_VOLUME_CUBIC_METRES = 0x2711, /**< Volume, cubic metres. */ BLE_GATT_UNIT_VELOCITY_METRES_PER_SECOND = 0x2712, /**< Velocity, metres per second. */ BLE_GATT_UNIT_ACCELERATION_METRES_PER_SECOND_SQUARED = 0x2713, /**< Acceleration, metres per second squared. */ BLE_GATT_UNIT_WAVENUMBER_RECIPROCAL_METRE = 0x2714, /**< Wave number reciprocal, metre. */ BLE_GATT_UNIT_DENSITY_KILOGRAM_PER_CUBIC_METRE = 0x2715, /**< Density, kilogram per cubic metre. */ BLE_GATT_UNIT_SURFACE_DENSITY_KILOGRAM_PER_SQUARE_METRE = 0x2716, /**< */ BLE_GATT_UNIT_SPECIFIC_VOLUME_CUBIC_METRE_PER_KILOGRAM = 0x2717, /**< */ BLE_GATT_UNIT_CURRENT_DENSITY_AMPERE_PER_SQUARE_METRE = 0x2718, /**< */ BLE_GATT_UNIT_MAGNETIC_FIELD_STRENGTH_AMPERE_PER_METRE = 0x2719, /**< Magnetic field strength, ampere per metre. */ BLE_GATT_UNIT_AMOUNT_CONCENTRATION_MOLE_PER_CUBIC_METRE = 0x271A, /**< */ BLE_GATT_UNIT_MASS_CONCENTRATION_KILOGRAM_PER_CUBIC_METRE = 0x271B, /**< */ BLE_GATT_UNIT_LUMINANCE_CANDELA_PER_SQUARE_METRE = 0x271C, /**< */ BLE_GATT_UNIT_REFRACTIVE_INDEX = 0x271D, /**< */ BLE_GATT_UNIT_RELATIVE_PERMEABILITY = 0x271E, /**< */ BLE_GATT_UNIT_PLANE_ANGLE_RADIAN = 0x2720, /**< */ BLE_GATT_UNIT_SOLID_ANGLE_STERADIAN = 0x2721, /**< */ BLE_GATT_UNIT_FREQUENCY_HERTZ = 0x2722, /**< Frequency, hertz. */ BLE_GATT_UNIT_FORCE_NEWTON = 0x2723, /**< Force, newton. */ BLE_GATT_UNIT_PRESSURE_PASCAL = 0x2724, /**< Pressure, pascal. */ BLE_GATT_UNIT_ENERGY_JOULE = 0x2725, /**< Energy, joule. */ BLE_GATT_UNIT_POWER_WATT = 0x2726, /**< Power, watt. */ BLE_GATT_UNIT_ELECTRIC_CHARGE_COULOMB = 0x2727, /**< Electrical charge, coulomb. */ BLE_GATT_UNIT_ELECTRIC_POTENTIAL_DIFFERENCE_VOLT = 0x2728, /**< Electrical potential difference, voltage. */ BLE_GATT_UNIT_CAPACITANCE_FARAD = 0x2729, /**< */ BLE_GATT_UNIT_ELECTRIC_RESISTANCE_OHM = 0x272A, /**< */ BLE_GATT_UNIT_ELECTRIC_CONDUCTANCE_SIEMENS = 0x272B, /**< */ BLE_GATT_UNIT_MAGNETIC_FLEX_WEBER = 0x272C, /**< */ BLE_GATT_UNIT_MAGNETIC_FLEX_DENSITY_TESLA = 0x272D, /**< */ BLE_GATT_UNIT_INDUCTANCE_HENRY = 0x272E, /**< */ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_CELSIUS = 0x272F, /**< */ BLE_GATT_UNIT_LUMINOUS_FLUX_LUMEN = 0x2730, /**< */ BLE_GATT_UNIT_ILLUMINANCE_LUX = 0x2731, /**< */ BLE_GATT_UNIT_ACTIVITY_REFERRED_TO_A_RADIONUCLIDE_BECQUEREL = 0x2732, /**< */ BLE_GATT_UNIT_ABSORBED_DOSE_GRAY = 0x2733, /**< */ BLE_GATT_UNIT_DOSE_EQUIVALENT_SIEVERT = 0x2734, /**< */ BLE_GATT_UNIT_CATALYTIC_ACTIVITY_KATAL = 0x2735, /**< */ BLE_GATT_UNIT_DYNAMIC_VISCOSITY_PASCAL_SECOND = 0x2740, /**< */ BLE_GATT_UNIT_MOMENT_OF_FORCE_NEWTON_METRE = 0x2741, /**< */ BLE_GATT_UNIT_SURFACE_TENSION_NEWTON_PER_METRE = 0x2742, /**< */ BLE_GATT_UNIT_ANGULAR_VELOCITY_RADIAN_PER_SECOND = 0x2743, /**< */ BLE_GATT_UNIT_ANGULAR_ACCELERATION_RADIAN_PER_SECOND_SQUARED = 0x2744, /**< */ BLE_GATT_UNIT_HEAT_FLUX_DENSITY_WATT_PER_SQUARE_METRE = 0x2745, /**< */ BLE_GATT_UNIT_HEAT_CAPACITY_JOULE_PER_KELVIN = 0x2746, /**< */ BLE_GATT_UNIT_SPECIFIC_HEAT_CAPACITY_JOULE_PER_KILOGRAM_KELVIN = 0x2747, /**< */ BLE_GATT_UNIT_SPECIFIC_ENERGY_JOULE_PER_KILOGRAM = 0x2748, /**< */ BLE_GATT_UNIT_THERMAL_CONDUCTIVITY_WATT_PER_METRE_KELVIN = 0x2749, /**< */ BLE_GATT_UNIT_ENERGY_DENSITY_JOULE_PER_CUBIC_METRE = 0x274A, /**< */ BLE_GATT_UNIT_ELECTRIC_FIELD_STRENGTH_VOLT_PER_METRE = 0x274B, /**< */ BLE_GATT_UNIT_ELECTRIC_CHARGE_DENSITY_COULOMB_PER_CUBIC_METRE = 0x274C, /**< */ BLE_GATT_UNIT_SURFACE_CHARGE_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274D, /**< */ BLE_GATT_UNIT_ELECTRIC_FLUX_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274E, /**< */ BLE_GATT_UNIT_PERMITTIVITY_FARAD_PER_METRE = 0x274F, /**< */ BLE_GATT_UNIT_PERMEABILITY_HENRY_PER_METRE = 0x2750, /**< */ BLE_GATT_UNIT_MOLAR_ENERGY_JOULE_PER_MOLE = 0x2751, /**< */ BLE_GATT_UNIT_MOLAR_ENTROPY_JOULE_PER_MOLE_KELVIN = 0x2752, /**< */ BLE_GATT_UNIT_EXPOSURE_COULOMB_PER_KILOGRAM = 0x2753, /**< */ BLE_GATT_UNIT_ABSORBED_DOSE_RATE_GRAY_PER_SECOND = 0x2754, /**< */ BLE_GATT_UNIT_RADIANT_INTENSITY_WATT_PER_STERADIAN = 0x2755, /**< */ BLE_GATT_UNIT_RADIANCE_WATT_PER_SQUARE_METRE_STERADIAN = 0x2756, /**< */ BLE_GATT_UNIT_CATALYTIC_ACTIVITY_CONCENTRATION_KATAL_PER_CUBIC_METRE = 0x2757, /**< */ BLE_GATT_UNIT_TIME_MINUTE = 0x2760, /**< Time, minute. */ BLE_GATT_UNIT_TIME_HOUR = 0x2761, /**< Time, hour. */ BLE_GATT_UNIT_TIME_DAY = 0x2762, /**< Time, day. */ BLE_GATT_UNIT_PLANE_ANGLE_DEGREE = 0x2763, /**< */ BLE_GATT_UNIT_PLANE_ANGLE_MINUTE = 0x2764, /**< */ BLE_GATT_UNIT_PLANE_ANGLE_SECOND = 0x2765, /**< */ BLE_GATT_UNIT_AREA_HECTARE = 0x2766, /**< */ BLE_GATT_UNIT_VOLUME_LITRE = 0x2767, /**< */ BLE_GATT_UNIT_MASS_TONNE = 0x2768, /**< */ BLE_GATT_UNIT_PRESSURE_BAR = 0x2780, /**< Pressure, bar. */ BLE_GATT_UNIT_PRESSURE_MILLIMETRE_OF_MERCURY = 0x2781, /**< Pressure, millimetre of mercury. */ BLE_GATT_UNIT_LENGTH_ANGSTROM = 0x2782, /**< */ BLE_GATT_UNIT_LENGTH_NAUTICAL_MILE = 0x2783, /**< */ BLE_GATT_UNIT_AREA_BARN = 0x2784, /**< */ BLE_GATT_UNIT_VELOCITY_KNOT = 0x2785, /**< */ BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_NEPER = 0x2786, /**< */ BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_BEL = 0x2787, /**< */ BLE_GATT_UNIT_LENGTH_YARD = 0x27A0, /**< Length, yard. */ BLE_GATT_UNIT_LENGTH_PARSEC = 0x27A1, /**< Length, parsec. */ BLE_GATT_UNIT_LENGTH_INCH = 0x27A2, /**< Length, inch. */ BLE_GATT_UNIT_LENGTH_FOOT = 0x27A3, /**< Length, foot. */ BLE_GATT_UNIT_LENGTH_MILE = 0x27A4, /**< Length, mile. */ BLE_GATT_UNIT_PRESSURE_POUND_FORCE_PER_SQUARE_INCH = 0x27A5, /**< */ BLE_GATT_UNIT_VELOCITY_KILOMETRE_PER_HOUR = 0x27A6, /**< Velocity, kilometre per hour. */ BLE_GATT_UNIT_VELOCITY_MILE_PER_HOUR = 0x27A7, /**< Velocity, mile per hour. */ BLE_GATT_UNIT_ANGULAR_VELOCITY_REVOLUTION_PER_MINUTE = 0x27A8, /**< Angular Velocity, revolution per minute. */ BLE_GATT_UNIT_ENERGY_GRAM_CALORIE = 0x27A9, /**< Energy, gram calorie. */ BLE_GATT_UNIT_ENERGY_KILOGRAM_CALORIE = 0x27AA, /**< Energy, kilogram calorie. */ BLE_GATT_UNIT_ENERGY_KILOWATT_HOUR = 0x27AB, /**< Energy, killowatt hour. */ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_FAHRENHEIT = 0x27AC, /**< */ BLE_GATT_UNIT_PERCENTAGE = 0x27AD, /**< Percentage. */ BLE_GATT_UNIT_PER_MILLE = 0x27AE, /**< */ BLE_GATT_UNIT_PERIOD_BEATS_PER_MINUTE = 0x27AF, /**< */ BLE_GATT_UNIT_ELECTRIC_CHARGE_AMPERE_HOURS = 0x27B0, /**< */ BLE_GATT_UNIT_MASS_DENSITY_MILLIGRAM_PER_DECILITRE = 0x27B1, /**< */ BLE_GATT_UNIT_MASS_DENSITY_MILLIMOLE_PER_LITRE = 0x27B2, /**< */ BLE_GATT_UNIT_TIME_YEAR = 0x27B3, /**< Time, year. */ BLE_GATT_UNIT_TIME_MONTH = 0x27B4, /**< Time, month. */ BLE_GATT_UNIT_CONCENTRATION_COUNT_PER_CUBIC_METRE = 0x27B5, /**< */ BLE_GATT_UNIT_IRRADIANCE_WATT_PER_SQUARE_METRE = 0x27B6 /**< */ }; /**************************************************************************/ /*! \brief Standard GATT number types. \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5.2 \note See http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml */ /**************************************************************************/ enum { BLE_GATT_FORMAT_RFU = 0x00, /**< Reserved for future use. */ BLE_GATT_FORMAT_BOOLEAN = 0x01, /**< Boolean. */ BLE_GATT_FORMAT_2BIT = 0x02, /**< Unsigned 2-bit integer. */ BLE_GATT_FORMAT_NIBBLE = 0x03, /**< Unsigned 4-bit integer. */ BLE_GATT_FORMAT_UINT8 = 0x04, /**< Unsigned 8-bit integer. */ BLE_GATT_FORMAT_UINT12 = 0x05, /**< Unsigned 12-bit integer. */ BLE_GATT_FORMAT_UINT16 = 0x06, /**< Unsigned 16-bit integer. */ BLE_GATT_FORMAT_UINT24 = 0x07, /**< Unsigned 24-bit integer. */ BLE_GATT_FORMAT_UINT32 = 0x08, /**< Unsigned 32-bit integer. */ BLE_GATT_FORMAT_UINT48 = 0x09, /**< Unsigned 48-bit integer. */ BLE_GATT_FORMAT_UINT64 = 0x0A, /**< Unsigned 64-bit integer. */ BLE_GATT_FORMAT_UINT128 = 0x0B, /**< Unsigned 128-bit integer. */ BLE_GATT_FORMAT_SINT8 = 0x0C, /**< Signed 2-bit integer. */ BLE_GATT_FORMAT_SINT12 = 0x0D, /**< Signed 12-bit integer. */ BLE_GATT_FORMAT_SINT16 = 0x0E, /**< Signed 16-bit integer. */ BLE_GATT_FORMAT_SINT24 = 0x0F, /**< Signed 24-bit integer. */ BLE_GATT_FORMAT_SINT32 = 0x10, /**< Signed 32-bit integer. */ BLE_GATT_FORMAT_SINT48 = 0x11, /**< Signed 48-bit integer. */ BLE_GATT_FORMAT_SINT64 = 0x12, /**< Signed 64-bit integer. */ BLE_GATT_FORMAT_SINT128 = 0x13, /**< Signed 128-bit integer. */ BLE_GATT_FORMAT_FLOAT32 = 0x14, /**< IEEE-754 32-bit floating point. */ BLE_GATT_FORMAT_FLOAT64 = 0x15, /**< IEEE-754 64-bit floating point. */ BLE_GATT_FORMAT_SFLOAT = 0x16, /**< IEEE-11073 16-bit SFLOAT. */ BLE_GATT_FORMAT_FLOAT = 0x17, /**< IEEE-11073 32-bit FLOAT. */ BLE_GATT_FORMAT_DUINT16 = 0x18, /**< IEEE-20601 format. */ BLE_GATT_FORMAT_UTF8S = 0x19, /**< UTF-8 string. */ BLE_GATT_FORMAT_UTF16S = 0x1A, /**< UTF-16 string. */ BLE_GATT_FORMAT_STRUCT = 0x1B /**< Opaque Structure. */ }; /**************************************************************************/ /*! \brief Standard GATT characteristic properties. \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.1.1 and Section 3.3.3.1 for Extended Properties */ /**************************************************************************/ enum Properties_t { BLE_GATT_CHAR_PROPERTIES_NONE = 0x00, BLE_GATT_CHAR_PROPERTIES_BROADCAST = 0x01, /**< Permits broadcasts of the characteristic value using the Server Characteristic Configuration descriptor. */ BLE_GATT_CHAR_PROPERTIES_READ = 0x02, /**< Permits reads of the characteristic value. */ BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE = 0x04, /**< Permits writes of the characteristic value without response. */ BLE_GATT_CHAR_PROPERTIES_WRITE = 0x08, /**< Permits writes of the characteristic value with response. */ BLE_GATT_CHAR_PROPERTIES_NOTIFY = 0x10, /**< Permits notifications of a characteristic value without acknowledgment. */ BLE_GATT_CHAR_PROPERTIES_INDICATE = 0x20, /**< Permits indications of a characteristic value with acknowledgment. */ BLE_GATT_CHAR_PROPERTIES_AUTHENTICATED_SIGNED_WRITES = 0x40, /**< Permits signed writes to the characteristic value. */ BLE_GATT_CHAR_PROPERTIES_EXTENDED_PROPERTIES = 0x80 /**< Additional characteristic properties are defined in the Characteristic Extended Properties descriptor */ }; /**************************************************************************/ /*! \brief GATT presentation format wrapper \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5 \note See https://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml */ /**************************************************************************/ struct PresentationFormat_t { uint8_t gatt_format; /**< Format of the value; see @ref ble_gatt_format_t. */ int8_t exponent; /**< Exponent for integer data types. Example: if Exponent = -3 and the char value is 3892, the actual value is 3.892 */ uint16_t gatt_unit; /**< UUID from Bluetooth Assigned Numbers; see @ref ble_gatt_unit_t. */ uint8_t gatt_namespace; /**< Namespace from Bluetooth Assigned Numbers, normally '1'; see @ref BLE_GATT_CPF_NAMESPACES. */ uint16_t gatt_nsdesc; /**< Namespace description from Bluetooth Assigned Numbers, normally '0'; see @ref BLE_GATT_CPF_NAMESPACES. */ }; /** * @brief Creates a new GattCharacteristic using the specified 16-bit * UUID, value length, and properties. * * @note The UUID value must be unique in the service and is normally >1. * * @param[in] uuid * The UUID to use for this characteristic. * @param[in] valuePtr * The memory holding the initial value. The value is copied * into the stack when the enclosing service is added, and * is thereafter maintained internally by the stack. * @param[in] len * The length in bytes of this characteristic's value. * @param[in] maxLen * The max length in bytes of this characteristic's value. * @param[in] props * The 8-bit field containing the characteristic's properties. * @param[in] descriptors * A pointer to an array of descriptors to be included within * this characteristic. The memory for the descriptor array is * owned by the caller, and should remain valid at least until * the enclosing service is added to the GATT table. * @param[in] numDescriptors * The number of descriptors in the previous array. * * @NOTE: If valuePtr == NULL, length == 0, and properties == READ * for the value attribute of a characteristic, then that particular * characteristic may be considered optional and dropped while * instantiating the service with the underlying BLE stack. */ GattCharacteristic(const UUID &uuid, uint8_t *valuePtr = NULL, uint16_t len = 0, uint16_t maxLen = 0, uint8_t props = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : _valueAttribute(uuid, valuePtr, len, maxLen), _properties(props), _requiredSecurity(SecurityManager::SECURITY_MODE_ENCRYPTION_OPEN_LINK), _descriptors(descriptors), _descriptorCount(numDescriptors), enabledReadAuthorization(false), enabledWriteAuthorization(false), readAuthorizationCallback(), writeAuthorizationCallback() { /* empty */ } public: /** * Set up the minimum security (mode and level) requirements for access to the characteristic's value attribute. * * @param securityMode Can be one of encryption or signing, with or without protection for man in the middle attacks (MITM). */ void requireSecurity(SecurityManager::SecurityMode_t securityMode) { _requiredSecurity = securityMode; } public: /** * Authorization. */ void setWriteAuthorizationCallback(void (*callback)(GattWriteAuthCallbackParams *)) { writeAuthorizationCallback.attach(callback); enabledWriteAuthorization = true; } template <typename T> void setWriteAuthorizationCallback(T *object, void (T::*member)(GattWriteAuthCallbackParams *)) { writeAuthorizationCallback.attach(object, member); enabledWriteAuthorization = true; } void setReadAuthorizationCallback(void (*callback)(GattReadAuthCallbackParams *)) { readAuthorizationCallback.attach(callback); enabledReadAuthorization = true; } template <typename T> void setReadAuthorizationCallback(T *object, void (T::*member)(GattReadAuthCallbackParams *)) { readAuthorizationCallback.attach(object, member); enabledReadAuthorization = true; } /** * Helper function meant to be called from the guts of the BLE stack to * determine the authorization reply for a write request. * @param params To capture the context of the write-auth request. Also contains an out-parameter for reply. * @return true if the write is authorized to proceed. */ GattAuthCallbackReply_t authorizeWrite(GattWriteAuthCallbackParams *params) { if (!isWriteAuthorizationEnabled()) { return AUTH_CALLBACK_REPLY_SUCCESS; } params->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; /* Initialized to no-error by default. */ writeAuthorizationCallback.call(params); return params->authorizationReply; } /** * Helper function meant to be called from the guts of the BLE stack to * determine the authorization reply for a read request. * @param params To capture the context of the read-auth request. * * @NOTE: To authorize or deny the read the params->authorizationReply field * should be set to true (authorize) or false (deny). * * If the read is approved and params->data is unchanged (NULL), * the current characteristic value will be used. * * If the read is approved, a new value can be provided by setting * the params->data pointer and params->len fields. * * @return true if the read is authorized to proceed. */ GattAuthCallbackReply_t authorizeRead(GattReadAuthCallbackParams *params) { if (!isReadAuthorizationEnabled()) { return AUTH_CALLBACK_REPLY_SUCCESS; } params->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; /* Initialized to no-error by default. */ readAuthorizationCallback.call(params); return params->authorizationReply; } /* accessors */ public: GattAttribute& getValueAttribute() {return _valueAttribute; } const GattAttribute& getValueAttribute() const {return _valueAttribute; } GattAttribute::Handle_t getValueHandle(void) const {return getValueAttribute().getHandle();} uint8_t getProperties(void) const {return _properties; } SecurityManager::SecurityMode_t getRequiredSecurity() const {return _requiredSecurity; } uint8_t getDescriptorCount(void) const {return _descriptorCount; } bool isReadAuthorizationEnabled() const {return enabledReadAuthorization; } bool isWriteAuthorizationEnabled() const {return enabledWriteAuthorization; } GattAttribute *getDescriptor(uint8_t index) { if (index >= _descriptorCount) { return NULL; } return _descriptors[index]; } private: GattAttribute _valueAttribute; uint8_t _properties; SecurityManager::SecurityMode_t _requiredSecurity; GattAttribute **_descriptors; uint8_t _descriptorCount; bool enabledReadAuthorization; bool enabledWriteAuthorization; FunctionPointerWithContext<GattReadAuthCallbackParams *> readAuthorizationCallback; FunctionPointerWithContext<GattWriteAuthCallbackParams *> writeAuthorizationCallback; private: /* Disallow copy and assignment. */ GattCharacteristic(const GattCharacteristic &); GattCharacteristic& operator=(const GattCharacteristic &); }; template <typename T> class ReadOnlyGattCharacteristic : public GattCharacteristic { public: ReadOnlyGattCharacteristic<T>(const UUID &uuid, T *valuePtr, uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T), sizeof(T), BLE_GATT_CHAR_PROPERTIES_READ | additionalProperties, descriptors, numDescriptors) { /* empty */ } }; template <typename T> class WriteOnlyGattCharacteristic : public GattCharacteristic { public: WriteOnlyGattCharacteristic<T>(const UUID &uuid, T *valuePtr, uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T), sizeof(T), BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) { /* empty */ } }; template <typename T> class ReadWriteGattCharacteristic : public GattCharacteristic { public: ReadWriteGattCharacteristic<T>(const UUID &uuid, T *valuePtr, uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T), sizeof(T), BLE_GATT_CHAR_PROPERTIES_READ | BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) { /* empty */ } }; template <typename T, unsigned NUM_ELEMENTS> class WriteOnlyArrayGattCharacteristic : public GattCharacteristic { public: WriteOnlyArrayGattCharacteristic<T, NUM_ELEMENTS>(const UUID &uuid, T valuePtr[NUM_ELEMENTS], uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T) * NUM_ELEMENTS, sizeof(T) * NUM_ELEMENTS, BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) { /* empty */ } }; template <typename T, unsigned NUM_ELEMENTS> class ReadOnlyArrayGattCharacteristic : public GattCharacteristic { public: ReadOnlyArrayGattCharacteristic<T, NUM_ELEMENTS>(const UUID &uuid, T valuePtr[NUM_ELEMENTS], uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T) * NUM_ELEMENTS, sizeof(T) * NUM_ELEMENTS, BLE_GATT_CHAR_PROPERTIES_READ | additionalProperties, descriptors, numDescriptors) { /* empty */ } }; template <typename T, unsigned NUM_ELEMENTS> class ReadWriteArrayGattCharacteristic : public GattCharacteristic { public: ReadWriteArrayGattCharacteristic<T, NUM_ELEMENTS>(const UUID &uuid, T valuePtr[NUM_ELEMENTS], uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE, GattAttribute *descriptors[] = NULL, unsigned numDescriptors = 0) : GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T) * NUM_ELEMENTS, sizeof(T) * NUM_ELEMENTS, BLE_GATT_CHAR_PROPERTIES_READ | BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) { /* empty */ } }; #endif // ifndef __GATT_CHARACTERISTIC_H__