BLE_API - extend

Users » 0cean » Code » BLE_API

extend

Fork of BLE_API by Bluetooth Low Energy

public/BLE.h@546:9fdf3d960d12, 2015-06-19 (annotated)

Committer:: rgrover1
Date:: Fri Jun 19 15:52:09 2015 +0100
Revision:: 546:9fdf3d960d12
Parent:: 545:45bbdb1d5eca
Child:: 547:f84c514eee35

Synchronized with git rev ebd6bbce

Author: Rohit Grover

introduce SecurityManager

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	528:8d21604fe31d	1	/* mbed Microcontroller Library
rgrover1	528:8d21604fe31d	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	528:8d21604fe31d	3	*
rgrover1	528:8d21604fe31d	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	528:8d21604fe31d	5	* you may not use this file except in compliance with the License.
rgrover1	528:8d21604fe31d	6	* You may obtain a copy of the License at
rgrover1	528:8d21604fe31d	7	*
rgrover1	528:8d21604fe31d	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	528:8d21604fe31d	9	*
rgrover1	528:8d21604fe31d	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	528:8d21604fe31d	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	528:8d21604fe31d	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	528:8d21604fe31d	13	* See the License for the specific language governing permissions and
rgrover1	528:8d21604fe31d	14	* limitations under the License.
rgrover1	528:8d21604fe31d	15	*/
rgrover1	528:8d21604fe31d	16
rgrover1	528:8d21604fe31d	17	#ifndef __BLE_H__
rgrover1	528:8d21604fe31d	18	#define __BLE_H__
rgrover1	528:8d21604fe31d	19
rgrover1	528:8d21604fe31d	20	#include "blecommon.h"
rgrover1	528:8d21604fe31d	21	#include "Gap.h"
rgrover1	528:8d21604fe31d	22	#include "GattServer.h"
rgrover1	528:8d21604fe31d	23	#include "GattClient.h"
rgrover1	528:8d21604fe31d	24	#include "BLEInstanceBase.h"
rgrover1	528:8d21604fe31d	25
rgrover1	528:8d21604fe31d	26	/**
rgrover1	528:8d21604fe31d	27	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	528:8d21604fe31d	28	* to enable this BLE API to work with any radio transparently.
rgrover1	528:8d21604fe31d	29	*/
rgrover1	528:8d21604fe31d	30	class BLE
rgrover1	528:8d21604fe31d	31	{
rgrover1	528:8d21604fe31d	32	public:
rgrover1	528:8d21604fe31d	33	/**
rgrover1	528:8d21604fe31d	34	* Initialize the BLE controller. This should be called before using
rgrover1	528:8d21604fe31d	35	* anything else in the BLE_API.
rgrover1	528:8d21604fe31d	36	*
rgrover1	528:8d21604fe31d	37	* init() hands control to the underlying BLE module to accomplish
rgrover1	528:8d21604fe31d	38	* initialization. This initialization may tacitly depend on other hardware
rgrover1	528:8d21604fe31d	39	* setup (such as clocks or power-modes) which happens early on during
rgrover1	528:8d21604fe31d	40	* system startup. It may not be safe to call init() from global static
rgrover1	528:8d21604fe31d	41	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	528:8d21604fe31d	42	* is safe to call BLE::init() from within main().
rgrover1	528:8d21604fe31d	43	*/
rgrover1	528:8d21604fe31d	44	ble_error_t init();
rgrover1	528:8d21604fe31d	45
rgrover1	537:00d5affbb2b2	46	/**
rgrover1	537:00d5affbb2b2	47	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	537:00d5affbb2b2	48	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	537:00d5affbb2b2	49	* repopulate the GATT database with new services and characteristics.
rgrover1	537:00d5affbb2b2	50	*/
rgrover1	537:00d5affbb2b2	51	ble_error_t shutdown(void) {
rgrover1	537:00d5affbb2b2	52	clearAdvertisingPayload();
rgrover1	537:00d5affbb2b2	53	return transport->shutdown();
rgrover1	537:00d5affbb2b2	54	}
rgrover1	528:8d21604fe31d	55
rgrover1	528:8d21604fe31d	56	/**
rgrover1	537:00d5affbb2b2	57	* This call allows the application to get the BLE stack version information.
rgrover1	537:00d5affbb2b2	58	*
rgrover1	537:00d5affbb2b2	59	* @return A pointer to a const string representing the version.
rgrover1	537:00d5affbb2b2	60	* Note: The string is owned by the BLE_API.
rgrover1	528:8d21604fe31d	61	*/
rgrover1	537:00d5affbb2b2	62	const char *getVersion(void) {
rgrover1	537:00d5affbb2b2	63	return transport->getVersion();
rgrover1	537:00d5affbb2b2	64	}
rgrover1	528:8d21604fe31d	65
rgrover1	537:00d5affbb2b2	66	/*
rgrover1	537:00d5affbb2b2	67	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	537:00d5affbb2b2	68	* going through this accessor.
rgrover1	537:00d5affbb2b2	69	*/
rgrover1	529:ccfae9d8e56e	70	const Gap &gap() const {
rgrover1	529:ccfae9d8e56e	71	return transport->getGap();
rgrover1	529:ccfae9d8e56e	72	}
rgrover1	529:ccfae9d8e56e	73	Gap &gap() {
rgrover1	529:ccfae9d8e56e	74	return transport->getGap();
rgrover1	529:ccfae9d8e56e	75	}
rgrover1	529:ccfae9d8e56e	76
rgrover1	538:fff02872b62f	77	/*
rgrover1	538:fff02872b62f	78	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1	538:fff02872b62f	79	* functionality requires going through this accessor.
rgrover1	538:fff02872b62f	80	*/
rgrover1	538:fff02872b62f	81	const GattServer& gattServer() const {
rgrover1	538:fff02872b62f	82	return transport->getGattServer();
rgrover1	538:fff02872b62f	83	}
rgrover1	538:fff02872b62f	84	GattServer& gattServer() {
rgrover1	538:fff02872b62f	85	return transport->getGattServer();
rgrover1	538:fff02872b62f	86	}
rgrover1	538:fff02872b62f	87
rgrover1	540:1fb1e0b809eb	88	/*
rgrover1	540:1fb1e0b809eb	89	* Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1	540:1fb1e0b809eb	90	* functionality requires going through this accessor.
rgrover1	540:1fb1e0b809eb	91	*/
rgrover1	540:1fb1e0b809eb	92	const GattClient& gattClient() const {
rgrover1	540:1fb1e0b809eb	93	return transport->getGattClient();
rgrover1	540:1fb1e0b809eb	94	}
rgrover1	540:1fb1e0b809eb	95	GattClient& gattClient() {
rgrover1	540:1fb1e0b809eb	96	return transport->getGattClient();
rgrover1	540:1fb1e0b809eb	97	}
rgrover1	540:1fb1e0b809eb	98
rgrover1	546:9fdf3d960d12	99	/*
rgrover1	546:9fdf3d960d12	100	* Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1	546:9fdf3d960d12	101	* SecurityManager related functionality requires going through this
rgrover1	546:9fdf3d960d12	102	* accessor.
rgrover1	546:9fdf3d960d12	103	*/
rgrover1	546:9fdf3d960d12	104	const SecurityManager& securityManager() const {
rgrover1	546:9fdf3d960d12	105	return transport->getSecurityManager();
rgrover1	546:9fdf3d960d12	106	}
rgrover1	546:9fdf3d960d12	107	SecurityManager& securityManager() {
rgrover1	546:9fdf3d960d12	108	return transport->getSecurityManager();
rgrover1	546:9fdf3d960d12	109	}
rgrover1	546:9fdf3d960d12	110
rgrover1	537:00d5affbb2b2	111	/**
rgrover1	537:00d5affbb2b2	112	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	537:00d5affbb2b2	113	* is a sleep function which will return when there is an application
rgrover1	537:00d5affbb2b2	114	* specific interrupt, but the MCU might wake up several times before
rgrover1	537:00d5affbb2b2	115	* returning (to service the stack). This is not always interchangeable with
rgrover1	537:00d5affbb2b2	116	* WFE().
rgrover1	537:00d5affbb2b2	117	*/
rgrover1	537:00d5affbb2b2	118	void waitForEvent(void) {
rgrover1	537:00d5affbb2b2	119	transport->waitForEvent();
rgrover1	537:00d5affbb2b2	120	}
rgrover1	537:00d5affbb2b2	121
rgrover1	537:00d5affbb2b2	122	/*
rgrover1	537:00d5affbb2b2	123	* Deprecation alert!
rgrover1	537:00d5affbb2b2	124	* All of the following are deprecated and may be dropped in a future
rgrover1	537:00d5affbb2b2	125	* release. Documentation should refer to alternative APIs.
rgrover1	537:00d5affbb2b2	126	*/
rgrover1	537:00d5affbb2b2	127
rgrover1	537:00d5affbb2b2	128	/* GAP specific APIs. */
rgrover1	531:bdcd44b03974	129	public:
rgrover1	528:8d21604fe31d	130	/**
rgrover1	528:8d21604fe31d	131	* Set the BTLE MAC address and type.
rgrover1	528:8d21604fe31d	132	* @return BLE_ERROR_NONE on success.
rgrover1	537:00d5affbb2b2	133	*
rgrover1	537:00d5affbb2b2	134	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	135	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	136	* ble.setAddress(...) should be replaced with
rgrover1	537:00d5affbb2b2	137	* ble.gap().setAddress(...).
rgrover1	528:8d21604fe31d	138	*/
rgrover1	537:00d5affbb2b2	139	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	537:00d5affbb2b2	140	return gap().setAddress(type, address);
rgrover1	537:00d5affbb2b2	141	}
rgrover1	528:8d21604fe31d	142
rgrover1	528:8d21604fe31d	143	/**
rgrover1	528:8d21604fe31d	144	* Fetch the BTLE MAC address and type.
rgrover1	528:8d21604fe31d	145	* @return BLE_ERROR_NONE on success.
rgrover1	537:00d5affbb2b2	146	*
rgrover1	537:00d5affbb2b2	147	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	148	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	149	* ble.getAddress(...) should be replaced with
rgrover1	537:00d5affbb2b2	150	* ble.gap().getAddress(...).
rgrover1	528:8d21604fe31d	151	*/
rgrover1	537:00d5affbb2b2	152	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	537:00d5affbb2b2	153	return gap().getAddress(typeP, address);
rgrover1	537:00d5affbb2b2	154	}
rgrover1	528:8d21604fe31d	155
rgrover1	528:8d21604fe31d	156	/**
rgrover1	537:00d5affbb2b2	157	* Set the GAP advertising mode to use for this device.
rgrover1	528:8d21604fe31d	158	*
rgrover1	537:00d5affbb2b2	159	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	160	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	161	* ble.setAdvertisingType(...) should be replaced with
rgrover1	537:00d5affbb2b2	162	* ble.gap().setAdvertisingType(...).
rgrover1	528:8d21604fe31d	163	*/
rgrover1	537:00d5affbb2b2	164	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	537:00d5affbb2b2	165	gap().setAdvertisingType(advType);
rgrover1	537:00d5affbb2b2	166	}
rgrover1	528:8d21604fe31d	167
rgrover1	528:8d21604fe31d	168	/**
rgrover1	528:8d21604fe31d	169	* @param[in] interval
rgrover1	528:8d21604fe31d	170	* Advertising interval in units of milliseconds. Advertising
rgrover1	528:8d21604fe31d	171	* is disabled if interval is 0. If interval is smaller than
rgrover1	528:8d21604fe31d	172	* the minimum supported value, then the minimum supported
rgrover1	537:00d5affbb2b2	173	* value is used instead. This minimum value can be discovered
rgrover1	537:00d5affbb2b2	174	* using getMinAdvertisingInterval().
rgrover1	528:8d21604fe31d	175	*
rgrover1	537:00d5affbb2b2	176	* This field must be set to 0 if connectionMode is equal
rgrover1	537:00d5affbb2b2	177	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	528:8d21604fe31d	178	*
rgrover1	537:00d5affbb2b2	179	* @note: Decreasing this value will allow central devices to detect a
rgrover1	537:00d5affbb2b2	180	* peripheral faster at the expense of more power being used by the radio
rgrover1	537:00d5affbb2b2	181	* due to the higher data transmit rate.
rgrover1	528:8d21604fe31d	182	*
rgrover1	537:00d5affbb2b2	183	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	184	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	185	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	186	* ble.gap().setAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	187	*
rgrover1	537:00d5affbb2b2	188	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	528:8d21604fe31d	189	* 'interval' argument. That required an explicit conversion from
rgrover1	528:8d21604fe31d	190	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	528:8d21604fe31d	191	* no longer required as the new units are milliseconds. Any application
rgrover1	528:8d21604fe31d	192	* code depending on the old semantics would need to be updated accordingly.
rgrover1	528:8d21604fe31d	193	*/
rgrover1	537:00d5affbb2b2	194	void setAdvertisingInterval(uint16_t interval) {
rgrover1	537:00d5affbb2b2	195	gap().setAdvertisingInterval(interval);
rgrover1	537:00d5affbb2b2	196	}
rgrover1	528:8d21604fe31d	197
rgrover1	528:8d21604fe31d	198	/**
rgrover1	528:8d21604fe31d	199	* @return Minimum Advertising interval in milliseconds.
rgrover1	537:00d5affbb2b2	200	*
rgrover1	537:00d5affbb2b2	201	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	202	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	203	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	204	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	205	*/
rgrover1	537:00d5affbb2b2	206	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	207	return gap().getMinAdvertisingInterval();
rgrover1	537:00d5affbb2b2	208	}
rgrover1	537:00d5affbb2b2	209
rgrover1	528:8d21604fe31d	210	/**
rgrover1	537:00d5affbb2b2	211	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	537:00d5affbb2b2	212	*
rgrover1	537:00d5affbb2b2	213	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	214	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	215	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	216	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	217	*/
rgrover1	537:00d5affbb2b2	218	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	219	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	537:00d5affbb2b2	220	}
rgrover1	537:00d5affbb2b2	221
rgrover1	528:8d21604fe31d	222	/**
rgrover1	528:8d21604fe31d	223	* @return Maximum Advertising interval in milliseconds.
rgrover1	537:00d5affbb2b2	224	*
rgrover1	537:00d5affbb2b2	225	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	226	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	227	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	537:00d5affbb2b2	228	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	528:8d21604fe31d	229	*/
rgrover1	537:00d5affbb2b2	230	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	537:00d5affbb2b2	231	return gap().getMaxAdvertisingInterval();
rgrover1	537:00d5affbb2b2	232	}
rgrover1	528:8d21604fe31d	233
rgrover1	528:8d21604fe31d	234	/**
rgrover1	528:8d21604fe31d	235	* @param[in] timeout
rgrover1	537:00d5affbb2b2	236	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	537:00d5affbb2b2	237	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	537:00d5affbb2b2	238	*
rgrover1	537:00d5affbb2b2	239	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	240	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	241	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	537:00d5affbb2b2	242	* ble.gap().setAdvertisingTimeout(...).
rgrover1	528:8d21604fe31d	243	*/
rgrover1	537:00d5affbb2b2	244	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	537:00d5affbb2b2	245	gap().setAdvertisingTimeout(timeout);
rgrover1	537:00d5affbb2b2	246	}
rgrover1	528:8d21604fe31d	247
rgrover1	528:8d21604fe31d	248	/**
rgrover1	537:00d5affbb2b2	249	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	537:00d5affbb2b2	250	* the underlying stack. It would be uncommon for this API to be used
rgrover1	537:00d5affbb2b2	251	* directly; there are other APIs to tweak advertisement parameters
rgrover1	537:00d5affbb2b2	252	* individually (see above).
rgrover1	537:00d5affbb2b2	253	*
rgrover1	537:00d5affbb2b2	254	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	255	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	256	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	257	* ble.gap().setAdvertisingParams(...).
rgrover1	528:8d21604fe31d	258	*/
rgrover1	537:00d5affbb2b2	259	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	537:00d5affbb2b2	260	gap().setAdvertisingParams(advParams);
rgrover1	537:00d5affbb2b2	261	}
rgrover1	528:8d21604fe31d	262
rgrover1	528:8d21604fe31d	263	/**
rgrover1	528:8d21604fe31d	264	* @return Read back advertising parameters. Useful for storing and
rgrover1	528:8d21604fe31d	265	* restoring parameters rapidly.
rgrover1	537:00d5affbb2b2	266	*
rgrover1	537:00d5affbb2b2	267	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	268	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	269	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	270	* ble.gap().getAdvertisingParams(...).
rgrover1	528:8d21604fe31d	271	*/
rgrover1	537:00d5affbb2b2	272	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	537:00d5affbb2b2	273	return gap().getAdvertisingParams();
rgrover1	537:00d5affbb2b2	274	}
rgrover1	528:8d21604fe31d	275
rgrover1	528:8d21604fe31d	276	/**
rgrover1	528:8d21604fe31d	277	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	278	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	279	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	280	* small.
rgrover1	528:8d21604fe31d	281	*
rgrover1	537:00d5affbb2b2	282	* @param[in] flags
rgrover1	537:00d5affbb2b2	283	* The flags to be added. Please refer to
rgrover1	537:00d5affbb2b2	284	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	537:00d5affbb2b2	285	* flags may be specified in combination.
rgrover1	537:00d5affbb2b2	286	*
rgrover1	537:00d5affbb2b2	287	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	288	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	289	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	537:00d5affbb2b2	290	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	528:8d21604fe31d	291	*/
rgrover1	537:00d5affbb2b2	292	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	537:00d5affbb2b2	293	return gap().accumulateAdvertisingPayload(flags);
rgrover1	537:00d5affbb2b2	294	}
rgrover1	528:8d21604fe31d	295
rgrover1	528:8d21604fe31d	296	/**
rgrover1	528:8d21604fe31d	297	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	298	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	299	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	300	* small.
rgrover1	528:8d21604fe31d	301	*
rgrover1	537:00d5affbb2b2	302	* @param[in] app
rgrover1	537:00d5affbb2b2	303	* The appearance of the peripheral.
rgrover1	537:00d5affbb2b2	304	*
rgrover1	537:00d5affbb2b2	305	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	306	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	307	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	537:00d5affbb2b2	308	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	528:8d21604fe31d	309	*/
rgrover1	537:00d5affbb2b2	310	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	537:00d5affbb2b2	311	return gap().accumulateAdvertisingPayload(app);
rgrover1	537:00d5affbb2b2	312	}
rgrover1	528:8d21604fe31d	313
rgrover1	528:8d21604fe31d	314	/**
rgrover1	528:8d21604fe31d	315	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	528:8d21604fe31d	316	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	528:8d21604fe31d	317	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	528:8d21604fe31d	318	* small.
rgrover1	528:8d21604fe31d	319	*
rgrover1	537:00d5affbb2b2	320	* @param[in] app
rgrover1	537:00d5affbb2b2	321	* The max transmit power to be used by the controller. This
rgrover1	537:00d5affbb2b2	322	* is only a hint.
rgrover1	537:00d5affbb2b2	323	*
rgrover1	537:00d5affbb2b2	324	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	325	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	326	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	537:00d5affbb2b2	327	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	528:8d21604fe31d	328	*/
rgrover1	537:00d5affbb2b2	329	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	537:00d5affbb2b2	330	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	537:00d5affbb2b2	331	}
rgrover1	528:8d21604fe31d	332
rgrover1	528:8d21604fe31d	333	/**
rgrover1	528:8d21604fe31d	334	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	528:8d21604fe31d	335	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	528:8d21604fe31d	336	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	528:8d21604fe31d	337	* advertising payload proves to be too small.
rgrover1	528:8d21604fe31d	338	*
rgrover1	528:8d21604fe31d	339	* @param type The type which describes the variable length data.
rgrover1	528:8d21604fe31d	340	* @param data data bytes.
rgrover1	528:8d21604fe31d	341	* @param len length of data.
rgrover1	537:00d5affbb2b2	342	*
rgrover1	537:00d5affbb2b2	343	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	344	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	345	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	537:00d5affbb2b2	346	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	528:8d21604fe31d	347	*/
rgrover1	537:00d5affbb2b2	348	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	537:00d5affbb2b2	349	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	537:00d5affbb2b2	350	}
rgrover1	537:00d5affbb2b2	351
rgrover1	537:00d5affbb2b2	352	/**
rgrover1	537:00d5affbb2b2	353	* Setup a particular, user-constructed advertisement payload for the
rgrover1	537:00d5affbb2b2	354	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	537:00d5affbb2b2	355	* there are other APIs to build an advertisement payload (see above).
rgrover1	537:00d5affbb2b2	356	*
rgrover1	537:00d5affbb2b2	357	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	358	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	359	* ble.setAdvertisingData(...) should be replaced with
rgrover1	537:00d5affbb2b2	360	* ble.gap().setAdvertisingPayload(...).
rgrover1	537:00d5affbb2b2	361	*/
rgrover1	537:00d5affbb2b2	362	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	537:00d5affbb2b2	363	return gap().setAdvertisingPayload(advData);
rgrover1	537:00d5affbb2b2	364	}
rgrover1	537:00d5affbb2b2	365
rgrover1	537:00d5affbb2b2	366	/**
rgrover1	537:00d5affbb2b2	367	* @return Read back advertising data. Useful for storing and
rgrover1	537:00d5affbb2b2	368	* restoring payload.
rgrover1	537:00d5affbb2b2	369	*
rgrover1	537:00d5affbb2b2	370	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	371	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	372	* ble.getAdvertisingData(...) should be replaced with
rgrover1	537:00d5affbb2b2	373	* ble.gap().getAdvertisingPayload()(...).
rgrover1	537:00d5affbb2b2	374	*/
rgrover1	537:00d5affbb2b2	375	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	537:00d5affbb2b2	376	return gap().getAdvertisingPayload();
rgrover1	537:00d5affbb2b2	377	}
rgrover1	537:00d5affbb2b2	378
rgrover1	537:00d5affbb2b2	379	/**
rgrover1	537:00d5affbb2b2	380	* Reset any advertising payload prepared from prior calls to
rgrover1	537:00d5affbb2b2	381	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	537:00d5affbb2b2	382	* initialized adv payload to the underlying stack.
rgrover1	537:00d5affbb2b2	383	*
rgrover1	537:00d5affbb2b2	384	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	385	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	386	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	537:00d5affbb2b2	387	* ble.gap().clearAdvertisingPayload(...).
rgrover1	537:00d5affbb2b2	388	*/
rgrover1	537:00d5affbb2b2	389	void clearAdvertisingPayload(void) {
rgrover1	537:00d5affbb2b2	390	gap().clearAdvertisingPayload();
rgrover1	537:00d5affbb2b2	391	}
rgrover1	537:00d5affbb2b2	392
rgrover1	537:00d5affbb2b2	393	/**
rgrover1	537:00d5affbb2b2	394	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	537:00d5affbb2b2	395	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	537:00d5affbb2b2	396	* This API will be dropped in a future release.
rgrover1	537:00d5affbb2b2	397	*
rgrover1	537:00d5affbb2b2	398	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	537:00d5affbb2b2	399	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	537:00d5affbb2b2	400	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	537:00d5affbb2b2	401	* API. Updates to the underlying advertisement payload now happen
rgrover1	537:00d5affbb2b2	402	* implicitly.
rgrover1	537:00d5affbb2b2	403	*/
rgrover1	537:00d5affbb2b2	404	ble_error_t setAdvertisingPayload(void) {
rgrover1	537:00d5affbb2b2	405	return BLE_ERROR_NONE;
rgrover1	537:00d5affbb2b2	406	}
rgrover1	528:8d21604fe31d	407
rgrover1	528:8d21604fe31d	408	/**
rgrover1	528:8d21604fe31d	409	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	528:8d21604fe31d	410	* scanResponse payload.
rgrover1	528:8d21604fe31d	411	*
rgrover1	537:00d5affbb2b2	412	* @param[in] type The type which describes the variable length data.
rgrover1	537:00d5affbb2b2	413	* @param[in] data data bytes.
rgrover1	537:00d5affbb2b2	414	* @param[in] len length of data.
rgrover1	537:00d5affbb2b2	415	*
rgrover1	537:00d5affbb2b2	416	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	417	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	418	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	537:00d5affbb2b2	419	* ble.gap().accumulateScanResponse(...).
rgrover1	528:8d21604fe31d	420	*/
rgrover1	537:00d5affbb2b2	421	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	537:00d5affbb2b2	422	return gap().accumulateScanResponse(type, data, len);
rgrover1	537:00d5affbb2b2	423	}
rgrover1	528:8d21604fe31d	424
rgrover1	528:8d21604fe31d	425	/**
rgrover1	528:8d21604fe31d	426	* Reset any scan response prepared from prior calls to
rgrover1	528:8d21604fe31d	427	* accumulateScanResponse().
rgrover1	528:8d21604fe31d	428	*
rgrover1	537:00d5affbb2b2	429	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	430	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	431	* ble.clearScanResponse(...) should be replaced with
rgrover1	537:00d5affbb2b2	432	* ble.gap().clearScanResponse(...).
rgrover1	528:8d21604fe31d	433	*/
rgrover1	537:00d5affbb2b2	434	void clearScanResponse(void) {
rgrover1	537:00d5affbb2b2	435	gap().clearScanResponse();
rgrover1	537:00d5affbb2b2	436	}
rgrover1	528:8d21604fe31d	437
rgrover1	528:8d21604fe31d	438	/**
rgrover1	537:00d5affbb2b2	439	* Start advertising.
rgrover1	537:00d5affbb2b2	440	*
rgrover1	537:00d5affbb2b2	441	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	442	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	443	* ble.startAdvertising(...) should be replaced with
rgrover1	537:00d5affbb2b2	444	* ble.gap().startAdvertising(...).
rgrover1	528:8d21604fe31d	445	*/
rgrover1	537:00d5affbb2b2	446	ble_error_t startAdvertising(void) {
rgrover1	537:00d5affbb2b2	447	/* HACK ALERT! the following bit with initializeGATTDatabase() is additional to
rgrover1	537:00d5affbb2b2	448	* gap().startAdvertising(). This was put in place to get some stacks to
rgrover1	537:00d5affbb2b2	449	* work--like CSR. We need to reach a point where this shouldn't be
rgrover1	537:00d5affbb2b2	450	* necessary. */
rgrover1	537:00d5affbb2b2	451	ble_error_t rc;
rgrover1	537:00d5affbb2b2	452	if ((rc = transport->getGattServer().initializeGATTDatabase()) != BLE_ERROR_NONE) {
rgrover1	537:00d5affbb2b2	453	return rc;
rgrover1	537:00d5affbb2b2	454	}
rgrover1	537:00d5affbb2b2	455
rgrover1	537:00d5affbb2b2	456	return gap().startAdvertising();
rgrover1	537:00d5affbb2b2	457	}
rgrover1	528:8d21604fe31d	458
rgrover1	528:8d21604fe31d	459	/**
rgrover1	537:00d5affbb2b2	460	* Stop advertising.
rgrover1	537:00d5affbb2b2	461	*
rgrover1	537:00d5affbb2b2	462	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	463	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	464	* ble.stopAdvertising(...) should be replaced with
rgrover1	537:00d5affbb2b2	465	* ble.gap().stopAdvertising(...).
rgrover1	528:8d21604fe31d	466	*/
rgrover1	537:00d5affbb2b2	467	ble_error_t stopAdvertising(void) {
rgrover1	537:00d5affbb2b2	468	return gap().stopAdvertising();
rgrover1	537:00d5affbb2b2	469	}
rgrover1	528:8d21604fe31d	470
rgrover1	528:8d21604fe31d	471	/**
rgrover1	528:8d21604fe31d	472	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	473	* @param[in] interval
rgrover1	537:00d5affbb2b2	474	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	475	* @param[in] window
rgrover1	537:00d5affbb2b2	476	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	477	* @param[in] timeout
rgrover1	537:00d5affbb2b2	478	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	537:00d5affbb2b2	479	* @param[in] activeScanning
rgrover1	537:00d5affbb2b2	480	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	537:00d5affbb2b2	481	* scan response from a peer if possible.
rgrover1	528:8d21604fe31d	482	*
rgrover1	528:8d21604fe31d	483	* The scanning window divided by the interval determines the duty cycle for
rgrover1	528:8d21604fe31d	484	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	528:8d21604fe31d	485	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	528:8d21604fe31d	486	* to have the interval and window set to the same value. In this case,
rgrover1	528:8d21604fe31d	487	* scanning is continuous, with a change of scanning frequency once every
rgrover1	528:8d21604fe31d	488	* interval.
rgrover1	528:8d21604fe31d	489	*
rgrover1	528:8d21604fe31d	490	* Once the scanning parameters have been configured, scanning can be
rgrover1	528:8d21604fe31d	491	* enabled by using startScan().
rgrover1	528:8d21604fe31d	492	*
rgrover1	528:8d21604fe31d	493	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	537:00d5affbb2b2	494	*
rgrover1	537:00d5affbb2b2	495	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	496	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	497	* ble.setScanParams(...) should be replaced with
rgrover1	537:00d5affbb2b2	498	* ble.gap().setScanParams(...).
rgrover1	528:8d21604fe31d	499	*/
rgrover1	528:8d21604fe31d	500	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	528:8d21604fe31d	501	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	528:8d21604fe31d	502	uint16_t timeout = 0,
rgrover1	537:00d5affbb2b2	503	bool activeScanning = false) {
rgrover1	537:00d5affbb2b2	504	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	537:00d5affbb2b2	505	}
rgrover1	537:00d5affbb2b2	506
rgrover1	537:00d5affbb2b2	507	/**
rgrover1	537:00d5affbb2b2	508	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	509	* @param[in] interval
rgrover1	537:00d5affbb2b2	510	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	511	*
rgrover1	537:00d5affbb2b2	512	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	513	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	514	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	515	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	516	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	517	* interval.
rgrover1	537:00d5affbb2b2	518	*
rgrover1	537:00d5affbb2b2	519	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	520	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	521	*
rgrover1	537:00d5affbb2b2	522	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	523	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	524	* ble.setScanInterval(interval) should be replaced with
rgrover1	537:00d5affbb2b2	525	* ble.gap().setScanInterval(interval).
rgrover1	537:00d5affbb2b2	526	*/
rgrover1	537:00d5affbb2b2	527	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	537:00d5affbb2b2	528	return gap().setScanInterval(interval);
rgrover1	537:00d5affbb2b2	529	}
rgrover1	537:00d5affbb2b2	530
rgrover1	537:00d5affbb2b2	531	/**
rgrover1	537:00d5affbb2b2	532	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	533	* @param[in] window
rgrover1	537:00d5affbb2b2	534	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	537:00d5affbb2b2	535	*
rgrover1	537:00d5affbb2b2	536	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	537	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	538	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	539	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	540	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	541	* interval.
rgrover1	537:00d5affbb2b2	542	*
rgrover1	537:00d5affbb2b2	543	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	544	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	545	*
rgrover1	537:00d5affbb2b2	546	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	547	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	548	* ble.setScanWindow(window) should be replaced with
rgrover1	537:00d5affbb2b2	549	* ble.gap().setScanWindow(window).
rgrover1	537:00d5affbb2b2	550	*/
rgrover1	537:00d5affbb2b2	551	ble_error_t setScanWindow(uint16_t window) {
rgrover1	537:00d5affbb2b2	552	return gap().setScanWindow(window);
rgrover1	537:00d5affbb2b2	553	}
rgrover1	528:8d21604fe31d	554
rgrover1	528:8d21604fe31d	555	/**
rgrover1	537:00d5affbb2b2	556	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	557	* @param[in] timeout
rgrover1	537:00d5affbb2b2	558	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	537:00d5affbb2b2	559	*
rgrover1	537:00d5affbb2b2	560	* The scanning window divided by the interval determines the duty cycle for
rgrover1	537:00d5affbb2b2	561	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	537:00d5affbb2b2	562	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	537:00d5affbb2b2	563	* to have the interval and window set to the same value. In this case,
rgrover1	537:00d5affbb2b2	564	* scanning is continuous, with a change of scanning frequency once every
rgrover1	537:00d5affbb2b2	565	* interval.
rgrover1	528:8d21604fe31d	566	*
rgrover1	537:00d5affbb2b2	567	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	568	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	569	*
rgrover1	537:00d5affbb2b2	570	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	537:00d5affbb2b2	571	*
rgrover1	537:00d5affbb2b2	572	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	573	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	574	* ble.setScanTimeout(...) should be replaced with
rgrover1	537:00d5affbb2b2	575	* ble.gap().setScanTimeout(...).
rgrover1	528:8d21604fe31d	576	*/
rgrover1	537:00d5affbb2b2	577	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	537:00d5affbb2b2	578	return gap().setScanTimeout(timeout);
rgrover1	537:00d5affbb2b2	579	}
rgrover1	528:8d21604fe31d	580
rgrover1	528:8d21604fe31d	581	/**
rgrover1	537:00d5affbb2b2	582	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	537:00d5affbb2b2	583	* @param[in] activeScanning
rgrover1	537:00d5affbb2b2	584	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	537:00d5affbb2b2	585	* scan response from a peer if possible.
rgrover1	537:00d5affbb2b2	586	*
rgrover1	537:00d5affbb2b2	587	* Once the scanning parameters have been configured, scanning can be
rgrover1	537:00d5affbb2b2	588	* enabled by using startScan().
rgrover1	537:00d5affbb2b2	589	*
rgrover1	537:00d5affbb2b2	590	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	591	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	592	* ble.setActiveScan(...) should be replaced with
rgrover1	537:00d5affbb2b2	593	* ble.gap().setActiveScanning(...).
rgrover1	537:00d5affbb2b2	594	*/
rgrover1	537:00d5affbb2b2	595	void setActiveScan(bool activeScanning) {
rgrover1	537:00d5affbb2b2	596	gap().setActiveScanning(activeScanning);
rgrover1	537:00d5affbb2b2	597	}
rgrover1	537:00d5affbb2b2	598
rgrover1	537:00d5affbb2b2	599	/**
rgrover1	537:00d5affbb2b2	600	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	537:00d5affbb2b2	601	* effect.
rgrover1	528:8d21604fe31d	602	*
rgrover1	537:00d5affbb2b2	603	* @param[in] callback
rgrover1	537:00d5affbb2b2	604	* The application specific callback to be invoked upon
rgrover1	537:00d5affbb2b2	605	* receiving every advertisement report. This can be passed in
rgrover1	537:00d5affbb2b2	606	* as NULL, in which case scanning may not be enabled at all.
rgrover1	537:00d5affbb2b2	607	*
rgrover1	537:00d5affbb2b2	608	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	609	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	610	* ble.startScan(callback) should be replaced with
rgrover1	537:00d5affbb2b2	611	* ble.gap().startScan(callback).
rgrover1	537:00d5affbb2b2	612	*/
rgrover1	537:00d5affbb2b2	613	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	537:00d5affbb2b2	614	return gap().startScan(callback);
rgrover1	537:00d5affbb2b2	615	}
rgrover1	537:00d5affbb2b2	616
rgrover1	537:00d5affbb2b2	617	/**
rgrover1	537:00d5affbb2b2	618	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	537:00d5affbb2b2	619	*
rgrover1	537:00d5affbb2b2	620	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	621	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	622	* ble.startScan(callback) should be replaced with
rgrover1	537:00d5affbb2b2	623	* ble.gap().startScan(object, callback).
rgrover1	528:8d21604fe31d	624	*/
rgrover1	528:8d21604fe31d	625	template<typename T>
rgrover1	528:8d21604fe31d	626	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	528:8d21604fe31d	627
rgrover1	528:8d21604fe31d	628	/**
rgrover1	528:8d21604fe31d	629	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	528:8d21604fe31d	630	*
rgrover1	528:8d21604fe31d	631	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	537:00d5affbb2b2	632	*
rgrover1	537:00d5affbb2b2	633	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	634	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	635	* ble.stopScan() should be replaced with
rgrover1	537:00d5affbb2b2	636	* ble.gap().stopScan().
rgrover1	528:8d21604fe31d	637	*/
rgrover1	537:00d5affbb2b2	638	ble_error_t stopScan(void) {
rgrover1	537:00d5affbb2b2	639	return gap().stopScan();
rgrover1	537:00d5affbb2b2	640	}
rgrover1	528:8d21604fe31d	641
rgrover1	528:8d21604fe31d	642	/**
rgrover1	528:8d21604fe31d	643	* Create a connection (GAP Link Establishment).
rgrover1	528:8d21604fe31d	644	* @param peerAddr
rgrover1	528:8d21604fe31d	645	* 48-bit address, LSB format.
rgrover1	528:8d21604fe31d	646	* @param peerAddrType
rgrover1	528:8d21604fe31d	647	* Address type of the peer.
rgrover1	528:8d21604fe31d	648	* @param connectionParams
rgrover1	528:8d21604fe31d	649	* Connection parameters.
rgrover1	528:8d21604fe31d	650	* @param scanParams
rgrover1	528:8d21604fe31d	651	* Paramters to be used while scanning for the peer.
rgrover1	528:8d21604fe31d	652	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	528:8d21604fe31d	653	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	528:8d21604fe31d	654	* a connection event.
rgrover1	537:00d5affbb2b2	655	*
rgrover1	537:00d5affbb2b2	656	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	657	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	658	* ble.connect(...) should be replaced with
rgrover1	537:00d5affbb2b2	659	* ble.gap().connect(...).
rgrover1	528:8d21604fe31d	660	*/
rgrover1	528:8d21604fe31d	661	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	528:8d21604fe31d	662	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	528:8d21604fe31d	663	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	537:00d5affbb2b2	664	const GapScanningParams *scanParams = NULL) {
rgrover1	537:00d5affbb2b2	665	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	537:00d5affbb2b2	666	}
rgrover1	528:8d21604fe31d	667
rgrover1	528:8d21604fe31d	668	/**
rgrover1	528:8d21604fe31d	669	* This call initiates the disconnection procedure, and its completion will
rgrover1	528:8d21604fe31d	670	* be communicated to the application with an invocation of the
rgrover1	528:8d21604fe31d	671	* onDisconnection callback.
rgrover1	528:8d21604fe31d	672	*
rgrover1	528:8d21604fe31d	673	* @param reason
rgrover1	528:8d21604fe31d	674	* The reason for disconnection to be sent back to the peer.
rgrover1	537:00d5affbb2b2	675	*
rgrover1	537:00d5affbb2b2	676	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	677	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	678	* ble.disconnect(reason) should be replaced with
rgrover1	537:00d5affbb2b2	679	* ble.gap().disconnect(reason).
rgrover1	528:8d21604fe31d	680	*/
rgrover1	537:00d5affbb2b2	681	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	537:00d5affbb2b2	682	return gap().disconnect(reason);
rgrover1	537:00d5affbb2b2	683	}
rgrover1	537:00d5affbb2b2	684
rgrover1	537:00d5affbb2b2	685	/**
rgrover1	537:00d5affbb2b2	686	* Returns the current GAP state of the device using a bitmask which
rgrover1	537:00d5affbb2b2	687	* describes whether the device is advertising and/or connected.
rgrover1	537:00d5affbb2b2	688	*
rgrover1	537:00d5affbb2b2	689	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	690	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	691	* ble.getGapState() should be replaced with
rgrover1	537:00d5affbb2b2	692	* ble.gap().getState().
rgrover1	537:00d5affbb2b2	693	*/
rgrover1	537:00d5affbb2b2	694	Gap::GapState_t getGapState(void) const {
rgrover1	537:00d5affbb2b2	695	return gap().getState();
rgrover1	537:00d5affbb2b2	696	}
rgrover1	537:00d5affbb2b2	697
rgrover1	537:00d5affbb2b2	698	/**
rgrover1	537:00d5affbb2b2	699	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	537:00d5affbb2b2	700	* defaults that the peripheral would like to have in a connection. The
rgrover1	537:00d5affbb2b2	701	* choice of the connection parameters is eventually up to the central.
rgrover1	537:00d5affbb2b2	702	*
rgrover1	537:00d5affbb2b2	703	* @param[out] params
rgrover1	537:00d5affbb2b2	704	* The structure where the parameters will be stored. Memory
rgrover1	537:00d5affbb2b2	705	* for this is owned by the caller.
rgrover1	537:00d5affbb2b2	706	*
rgrover1	537:00d5affbb2b2	707	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	537:00d5affbb2b2	708	* the given structure pointed to by params.
rgrover1	537:00d5affbb2b2	709	*
rgrover1	537:00d5affbb2b2	710	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	711	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	712	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	713	* ble.gap().getPreferredConnectionParams().
rgrover1	537:00d5affbb2b2	714	*/
rgrover1	537:00d5affbb2b2	715	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	716	return gap().getPreferredConnectionParams(params);
rgrover1	537:00d5affbb2b2	717	}
rgrover1	537:00d5affbb2b2	718
rgrover1	537:00d5affbb2b2	719	/**
rgrover1	537:00d5affbb2b2	720	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	537:00d5affbb2b2	721	* defaults that the peripheral would like to have in a connection. The
rgrover1	537:00d5affbb2b2	722	* choice of the connection parameters is eventually up to the central.
rgrover1	537:00d5affbb2b2	723	*
rgrover1	537:00d5affbb2b2	724	* @param[in] params
rgrover1	537:00d5affbb2b2	725	* The structure containing the desired parameters.
rgrover1	537:00d5affbb2b2	726	*
rgrover1	537:00d5affbb2b2	727	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	728	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	729	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	730	* ble.gap().setPreferredConnectionParams().
rgrover1	537:00d5affbb2b2	731	*/
rgrover1	537:00d5affbb2b2	732	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	733	return gap().setPreferredConnectionParams(params);
rgrover1	537:00d5affbb2b2	734	}
rgrover1	537:00d5affbb2b2	735
rgrover1	537:00d5affbb2b2	736	/**
rgrover1	537:00d5affbb2b2	737	* Update connection parameters while in the peripheral role.
rgrover1	537:00d5affbb2b2	738	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	537:00d5affbb2b2	739	* the central to perform the procedure.
rgrover1	537:00d5affbb2b2	740	* @param[in] handle
rgrover1	537:00d5affbb2b2	741	* Connection Handle
rgrover1	537:00d5affbb2b2	742	* @param[in] params
rgrover1	537:00d5affbb2b2	743	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	537:00d5affbb2b2	744	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	537:00d5affbb2b2	745	*
rgrover1	537:00d5affbb2b2	746	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	747	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	748	* ble.updateConnectionParams() should be replaced with
rgrover1	537:00d5affbb2b2	749	* ble.gap().updateConnectionParams().
rgrover1	537:00d5affbb2b2	750	*/
rgrover1	537:00d5affbb2b2	751	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	537:00d5affbb2b2	752	return gap().updateConnectionParams(handle, params);
rgrover1	537:00d5affbb2b2	753	}
rgrover1	537:00d5affbb2b2	754
rgrover1	537:00d5affbb2b2	755	/**
rgrover1	537:00d5affbb2b2	756	* Set the device name characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	757	* @param[in] deviceName
rgrover1	537:00d5affbb2b2	758	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	537:00d5affbb2b2	759	*
rgrover1	537:00d5affbb2b2	760	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	761	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	762	* ble.setDeviceName() should be replaced with
rgrover1	537:00d5affbb2b2	763	* ble.gap().setDeviceName().
rgrover1	537:00d5affbb2b2	764	*/
rgrover1	537:00d5affbb2b2	765	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	537:00d5affbb2b2	766	return gap().setDeviceName(deviceName);
rgrover1	537:00d5affbb2b2	767	}
rgrover1	537:00d5affbb2b2	768
rgrover1	537:00d5affbb2b2	769	/**
rgrover1	537:00d5affbb2b2	770	* Get the value of the device name characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	771	* @param[out] deviceName
rgrover1	537:00d5affbb2b2	772	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	537:00d5affbb2b2	773	* terminated* string will be placed. Set this
rgrover1	537:00d5affbb2b2	774	* value to NULL in order to obtain the deviceName-length
rgrover1	537:00d5affbb2b2	775	* from the 'length' parameter.
rgrover1	537:00d5affbb2b2	776	*
rgrover1	537:00d5affbb2b2	777	* @param[in/out] lengthP
rgrover1	537:00d5affbb2b2	778	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	537:00d5affbb2b2	779	* (on output) the complete device name length (without the
rgrover1	537:00d5affbb2b2	780	* null terminator).
rgrover1	537:00d5affbb2b2	781	*
rgrover1	537:00d5affbb2b2	782	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	537:00d5affbb2b2	783	* length will return the complete device name length, and not the
rgrover1	537:00d5affbb2b2	784	* number of bytes actually returned in deviceName. The application may
rgrover1	537:00d5affbb2b2	785	* use this information to retry with a suitable buffer size.
rgrover1	537:00d5affbb2b2	786	*
rgrover1	537:00d5affbb2b2	787	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	788	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	789	* ble.getDeviceName() should be replaced with
rgrover1	537:00d5affbb2b2	790	* ble.gap().getDeviceName().
rgrover1	537:00d5affbb2b2	791	*/
rgrover1	537:00d5affbb2b2	792	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	537:00d5affbb2b2	793	return gap().getDeviceName(deviceName, lengthP);
rgrover1	537:00d5affbb2b2	794	}
rgrover1	537:00d5affbb2b2	795
rgrover1	537:00d5affbb2b2	796	/**
rgrover1	537:00d5affbb2b2	797	* Set the appearance characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	798	* @param[in] appearance
rgrover1	537:00d5affbb2b2	799	* The new value for the device-appearance.
rgrover1	537:00d5affbb2b2	800	*
rgrover1	537:00d5affbb2b2	801	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	802	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	803	* ble.setAppearance() should be replaced with
rgrover1	537:00d5affbb2b2	804	* ble.gap().setAppearance().
rgrover1	537:00d5affbb2b2	805	*/
rgrover1	537:00d5affbb2b2	806	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	537:00d5affbb2b2	807	return gap().setAppearance(appearance);
rgrover1	537:00d5affbb2b2	808	}
rgrover1	537:00d5affbb2b2	809
rgrover1	537:00d5affbb2b2	810	/**
rgrover1	537:00d5affbb2b2	811	* Get the appearance characteristic in the GAP service.
rgrover1	537:00d5affbb2b2	812	* @param[out] appearance
rgrover1	537:00d5affbb2b2	813	* The new value for the device-appearance.
rgrover1	537:00d5affbb2b2	814	*
rgrover1	537:00d5affbb2b2	815	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	816	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	817	* ble.getAppearance() should be replaced with
rgrover1	537:00d5affbb2b2	818	* ble.gap().getAppearance().
rgrover1	537:00d5affbb2b2	819	*/
rgrover1	537:00d5affbb2b2	820	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	537:00d5affbb2b2	821	return gap().getAppearance(appearanceP);
rgrover1	537:00d5affbb2b2	822	}
rgrover1	537:00d5affbb2b2	823
rgrover1	537:00d5affbb2b2	824	/**
rgrover1	537:00d5affbb2b2	825	* Set the radio's transmit power.
rgrover1	537:00d5affbb2b2	826	* @param[in] txPower Radio transmit power in dBm.
rgrover1	537:00d5affbb2b2	827	*
rgrover1	537:00d5affbb2b2	828	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	829	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	830	* ble.setTxPower() should be replaced with
rgrover1	537:00d5affbb2b2	831	* ble.gap().setTxPower().
rgrover1	537:00d5affbb2b2	832	*/
rgrover1	537:00d5affbb2b2	833	ble_error_t setTxPower(int8_t txPower) {
rgrover1	537:00d5affbb2b2	834	return gap().setTxPower(txPower);
rgrover1	537:00d5affbb2b2	835	}
rgrover1	537:00d5affbb2b2	836
rgrover1	537:00d5affbb2b2	837	/**
rgrover1	537:00d5affbb2b2	838	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	537:00d5affbb2b2	839	*
rgrover1	537:00d5affbb2b2	840	* @param[out] valueArrayPP
rgrover1	537:00d5affbb2b2	841	* Out parameter to receive the immutable array of Tx values.
rgrover1	537:00d5affbb2b2	842	* @param[out] countP
rgrover1	537:00d5affbb2b2	843	* Out parameter to receive the array's size.
rgrover1	537:00d5affbb2b2	844	*
rgrover1	537:00d5affbb2b2	845	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	537:00d5affbb2b2	846	* You should use the parallel API from Gap directly. A former call to
rgrover1	537:00d5affbb2b2	847	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	537:00d5affbb2b2	848	* ble.gap().getPermittedTxPowerValues().
rgrover1	537:00d5affbb2b2	849	*/
rgrover1	537:00d5affbb2b2	850	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	537:00d5affbb2b2	851	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	537:00d5affbb2b2	852	}
rgrover1	528:8d21604fe31d	853
rgrover1	528:8d21604fe31d	854	/**
rgrover1	528:8d21604fe31d	855	* Add a service declaration to the local server ATT table. Also add the
rgrover1	528:8d21604fe31d	856	* characteristics contained within.
rgrover1	539:0b6e82025358	857	*
rgrover1	539:0b6e82025358	858	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	539:0b6e82025358	859	* You should use the parallel API from GattServer directly. A former call
rgrover1	539:0b6e82025358	860	* to ble.addService() should be replaced with
rgrover1	539:0b6e82025358	861	* ble.gattServer().addService().
rgrover1	528:8d21604fe31d	862	*/
rgrover1	539:0b6e82025358	863	ble_error_t addService(GattService &service) {
rgrover1	539:0b6e82025358	864	return gattServer().addService(service);
rgrover1	539:0b6e82025358	865	}
rgrover1	539:0b6e82025358	866
rgrover1	539:0b6e82025358	867	/**
rgrover1	539:0b6e82025358	868	* Read the value of a characteristic from the local GattServer
rgrover1	539:0b6e82025358	869	* @param[in] attributeHandle
rgrover1	539:0b6e82025358	870	* Attribute handle for the value attribute of the characteristic.
rgrover1	539:0b6e82025358	871	* @param[out] buffer
rgrover1	539:0b6e82025358	872	* A buffer to hold the value being read.
rgrover1	539:0b6e82025358	873	* @param[in/out] lengthP
rgrover1	539:0b6e82025358	874	* Length of the buffer being supplied. If the attribute
rgrover1	539:0b6e82025358	875	* value is longer than the size of the supplied buffer,
rgrover1	539:0b6e82025358	876	* this variable will hold upon return the total attribute value length
rgrover1	539:0b6e82025358	877	* (excluding offset). The application may use this
rgrover1	539:0b6e82025358	878	* information to allocate a suitable buffer size.
rgrover1	539:0b6e82025358	879	*
rgrover1	539:0b6e82025358	880	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	539:0b6e82025358	881	*
rgrover1	539:0b6e82025358	882	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	539:0b6e82025358	883	* You should use the parallel API from GattServer directly. A former call
rgrover1	539:0b6e82025358	884	* to ble.readCharacteristicValue() should be replaced with
rgrover1	539:0b6e82025358	885	* ble.gattServer().read().
rgrover1	539:0b6e82025358	886	*/
rgrover1	539:0b6e82025358	887	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	539:0b6e82025358	888	return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1	539:0b6e82025358	889	}
rgrover1	528:8d21604fe31d	890
rgrover1	528:8d21604fe31d	891	/**
rgrover1	539:0b6e82025358	892	* Read the value of a characteristic from the local GattServer
rgrover1	539:0b6e82025358	893	* @param[in] connectionHandle
rgrover1	539:0b6e82025358	894	* Connection Handle.
rgrover1	539:0b6e82025358	895	* @param[in] attributeHandle
rgrover1	539:0b6e82025358	896	* Attribute handle for the value attribute of the characteristic.
rgrover1	539:0b6e82025358	897	* @param[out] buffer
rgrover1	539:0b6e82025358	898	* A buffer to hold the value being read.
rgrover1	539:0b6e82025358	899	* @param[in/out] lengthP
rgrover1	539:0b6e82025358	900	* Length of the buffer being supplied. If the attribute
rgrover1	539:0b6e82025358	901	* value is longer than the size of the supplied buffer,
rgrover1	539:0b6e82025358	902	* this variable will hold upon return the total attribute value length
rgrover1	539:0b6e82025358	903	* (excluding offset). The application may use this
rgrover1	539:0b6e82025358	904	* information to allocate a suitable buffer size.
rgrover1	539:0b6e82025358	905	*
rgrover1	539:0b6e82025358	906	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	539:0b6e82025358	907	*
rgrover1	539:0b6e82025358	908	* @note This API is a version of above with an additional connection handle
rgrover1	539:0b6e82025358	909	* parameter to allow fetches for connection-specific multivalued
rgrover1	539:0b6e82025358	910	* attribtues (such as the CCCDs).
rgrover1	539:0b6e82025358	911	*
rgrover1	539:0b6e82025358	912	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	539:0b6e82025358	913	* You should use the parallel API from GattServer directly. A former call
rgrover1	539:0b6e82025358	914	* to ble.readCharacteristicValue() should be replaced with
rgrover1	539:0b6e82025358	915	* ble.gattServer().read().
rgrover1	528:8d21604fe31d	916	*/
rgrover1	539:0b6e82025358	917	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	539:0b6e82025358	918	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	539:0b6e82025358	919	}
rgrover1	528:8d21604fe31d	920
rgrover1	528:8d21604fe31d	921	/**
rgrover1	539:0b6e82025358	922	* Update the value of a characteristic on the local GattServer.
rgrover1	539:0b6e82025358	923	*
rgrover1	539:0b6e82025358	924	* @param[in] attributeHandle
rgrover1	539:0b6e82025358	925	* Handle for the value attribute of the Characteristic.
rgrover1	539:0b6e82025358	926	* @param[in] value
rgrover1	539:0b6e82025358	927	* A pointer to a buffer holding the new value
rgrover1	539:0b6e82025358	928	* @param[in] size
rgrover1	539:0b6e82025358	929	* Size of the new value (in bytes).
rgrover1	539:0b6e82025358	930	* @param[in] localOnly
rgrover1	539:0b6e82025358	931	* Should this update be kept on the local
rgrover1	539:0b6e82025358	932	* GattServer regardless of the state of the
rgrover1	539:0b6e82025358	933	* notify/indicate flag in the CCCD for this
rgrover1	539:0b6e82025358	934	* Characteristic? If set to true, no notification
rgrover1	539:0b6e82025358	935	* or indication is generated.
rgrover1	539:0b6e82025358	936	*
rgrover1	539:0b6e82025358	937	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	539:0b6e82025358	938	*
rgrover1	539:0b6e82025358	939	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	539:0b6e82025358	940	* You should use the parallel API from GattServer directly. A former call
rgrover1	539:0b6e82025358	941	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	539:0b6e82025358	942	* ble.gattServer().write().
rgrover1	528:8d21604fe31d	943	*/
rgrover1	539:0b6e82025358	944	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1	539:0b6e82025358	945	const uint8_t *value,
rgrover1	539:0b6e82025358	946	uint16_t size,
rgrover1	539:0b6e82025358	947	bool localOnly = false) {
rgrover1	539:0b6e82025358	948	return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1	539:0b6e82025358	949	}
rgrover1	539:0b6e82025358	950
rgrover1	528:8d21604fe31d	951	/**
rgrover1	539:0b6e82025358	952	* Update the value of a characteristic on the local GattServer. A version
rgrover1	539:0b6e82025358	953	* of the same as above with connection handle parameter to allow updates
rgrover1	539:0b6e82025358	954	* for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1	539:0b6e82025358	955	*
rgrover1	539:0b6e82025358	956	* @param[in] connectionHandle
rgrover1	539:0b6e82025358	957	* Connection Handle.
rgrover1	539:0b6e82025358	958	* @param[in] attributeHandle
rgrover1	539:0b6e82025358	959	* Handle for the value attribute of the Characteristic.
rgrover1	539:0b6e82025358	960	* @param[in] value
rgrover1	539:0b6e82025358	961	* A pointer to a buffer holding the new value
rgrover1	539:0b6e82025358	962	* @param[in] size
rgrover1	539:0b6e82025358	963	* Size of the new value (in bytes).
rgrover1	539:0b6e82025358	964	* @param[in] localOnly
rgrover1	539:0b6e82025358	965	* Should this update be kept on the local
rgrover1	539:0b6e82025358	966	* GattServer regardless of the state of the
rgrover1	539:0b6e82025358	967	* notify/indicate flag in the CCCD for this
rgrover1	539:0b6e82025358	968	* Characteristic? If set to true, no notification
rgrover1	539:0b6e82025358	969	* or indication is generated.
rgrover1	539:0b6e82025358	970	*
rgrover1	539:0b6e82025358	971	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	539:0b6e82025358	972	*
rgrover1	539:0b6e82025358	973	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	539:0b6e82025358	974	* You should use the parallel API from GattServer directly. A former call
rgrover1	539:0b6e82025358	975	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	539:0b6e82025358	976	* ble.gattServer().write().
rgrover1	528:8d21604fe31d	977	*/
rgrover1	528:8d21604fe31d	978	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	528:8d21604fe31d	979	GattAttribute::Handle_t attributeHandle,
rgrover1	528:8d21604fe31d	980	const uint8_t *value,
rgrover1	528:8d21604fe31d	981	uint16_t size,
rgrover1	539:0b6e82025358	982	bool localOnly = false) {
rgrover1	539:0b6e82025358	983	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1	539:0b6e82025358	984	}
rgrover1	528:8d21604fe31d	985
rgrover1	541:aa30f63e7b3f	986	/**
rgrover1	546:9fdf3d960d12	987	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	546:9fdf3d960d12	988	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	546:9fdf3d960d12	989	* devices to securely exchange data and privately detect each other.
rgrover1	546:9fdf3d960d12	990	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	546:9fdf3d960d12	991	*
rgrover1	546:9fdf3d960d12	992	* @param[in] enableBonding Allow for bonding.
rgrover1	546:9fdf3d960d12	993	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	546:9fdf3d960d12	994	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	546:9fdf3d960d12	995	* such as availability of a display or keyboard to
rgrover1	546:9fdf3d960d12	996	* support out-of-band exchanges of security data.
rgrover1	546:9fdf3d960d12	997	* @param[in] passkey To specify a static passkey.
rgrover1	546:9fdf3d960d12	998	*
rgrover1	546:9fdf3d960d12	999	* @return BLE_ERROR_NONE on success.
rgrover1	546:9fdf3d960d12	1000	*
rgrover1	546:9fdf3d960d12	1001	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1002	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1003	* call to ble.initializeSecurity(...) should be replaced with
rgrover1	546:9fdf3d960d12	1004	* ble.securityManager().init(...).
rgrover1	546:9fdf3d960d12	1005	*/
rgrover1	546:9fdf3d960d12	1006	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	546:9fdf3d960d12	1007	bool requireMITM = true,
rgrover1	546:9fdf3d960d12	1008	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1	546:9fdf3d960d12	1009	const SecurityManager::Passkey_t passkey = NULL) {
rgrover1	546:9fdf3d960d12	1010	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1	546:9fdf3d960d12	1011	}
rgrover1	546:9fdf3d960d12	1012
rgrover1	546:9fdf3d960d12	1013	/**
rgrover1	546:9fdf3d960d12	1014	* Get the security status of a connection.
rgrover1	546:9fdf3d960d12	1015	*
rgrover1	546:9fdf3d960d12	1016	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	546:9fdf3d960d12	1017	* @param[out] securityStatusP security status.
rgrover1	546:9fdf3d960d12	1018	*
rgrover1	546:9fdf3d960d12	1019	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	546:9fdf3d960d12	1020	*
rgrover1	546:9fdf3d960d12	1021	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1022	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1023	* call to ble.getLinkSecurity(...) should be replaced with
rgrover1	546:9fdf3d960d12	1024	* ble.securityManager().getLinkSecurity(...).
rgrover1	546:9fdf3d960d12	1025	*/
rgrover1	546:9fdf3d960d12	1026	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1	546:9fdf3d960d12	1027	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	546:9fdf3d960d12	1028	}
rgrover1	546:9fdf3d960d12	1029
rgrover1	546:9fdf3d960d12	1030	/**
rgrover1	546:9fdf3d960d12	1031	* Delete all peer device context and all related bonding information from
rgrover1	546:9fdf3d960d12	1032	* the database within the security manager.
rgrover1	546:9fdf3d960d12	1033	*
rgrover1	546:9fdf3d960d12	1034	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	546:9fdf3d960d12	1035	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	546:9fdf3d960d12	1036	* application registration.
rgrover1	546:9fdf3d960d12	1037	*
rgrover1	546:9fdf3d960d12	1038	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1039	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1040	* call to ble.purgeAllBondingState() should be replaced with
rgrover1	546:9fdf3d960d12	1041	* ble.securityManager().purgeAllBondingState().
rgrover1	546:9fdf3d960d12	1042	*/
rgrover1	546:9fdf3d960d12	1043	ble_error_t purgeAllBondingState(void) {
rgrover1	546:9fdf3d960d12	1044	return securityManager().purgeAllBondingState();
rgrover1	546:9fdf3d960d12	1045	}
rgrover1	546:9fdf3d960d12	1046
rgrover1	546:9fdf3d960d12	1047	/**
rgrover1	541:aa30f63e7b3f	1048	* Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1	541:aa30f63e7b3f	1049	* possible event types.
rgrover1	541:aa30f63e7b3f	1050	*
rgrover1	541:aa30f63e7b3f	1051	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	541:aa30f63e7b3f	1052	* You should use the parallel API from GattServer directly. A former call
rgrover1	541:aa30f63e7b3f	1053	* to ble.onTimeout(callback) should be replaced with
rgrover1	541:aa30f63e7b3f	1054	* ble.gap().onTimeout(callback).
rgrover1	541:aa30f63e7b3f	1055	*/
rgrover1	541:aa30f63e7b3f	1056	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1	541:aa30f63e7b3f	1057	gap().onTimeout(timeoutCallback);
rgrover1	541:aa30f63e7b3f	1058	}
rgrover1	528:8d21604fe31d	1059
rgrover1	543:4defb791aa94	1060	/**
rgrover1	543:4defb791aa94	1061	* Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1	543:4defb791aa94	1062	*
rgrover1	543:4defb791aa94	1063	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	543:4defb791aa94	1064	* You should use the parallel API from GattServer directly. A former call
rgrover1	543:4defb791aa94	1065	* to ble.onConnection(callback) should be replaced with
rgrover1	543:4defb791aa94	1066	* ble.gap().onConnection(callback).
rgrover1	543:4defb791aa94	1067	*/
rgrover1	543:4defb791aa94	1068	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1	543:4defb791aa94	1069	gap().onConnection(connectionCallback);
rgrover1	543:4defb791aa94	1070	}
rgrover1	543:4defb791aa94	1071
rgrover1	528:8d21604fe31d	1072	/**
rgrover1	540:1fb1e0b809eb	1073	* Used to setup a callback for GAP disconnection.
rgrover1	544:840f428d18c7	1074	*
rgrover1	544:840f428d18c7	1075	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	544:840f428d18c7	1076	* You should use the parallel API from GattServer directly. A former call
rgrover1	544:840f428d18c7	1077	* to ble.onDisconnection(callback) should be replaced with
rgrover1	544:840f428d18c7	1078	* ble.gap().onDisconnection(callback).
rgrover1	528:8d21604fe31d	1079	*/
rgrover1	544:840f428d18c7	1080	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1	544:840f428d18c7	1081	gap().onDisconnection(disconnectionCallback);
rgrover1	544:840f428d18c7	1082	}
rgrover1	528:8d21604fe31d	1083
rgrover1	528:8d21604fe31d	1084	/**
rgrover1	540:1fb1e0b809eb	1085	* Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1	540:1fb1e0b809eb	1086	* callbacks receive no context and are therefore different from the
rgrover1	540:1fb1e0b809eb	1087	* onDisconnection callback.
rgrover1	544:840f428d18c7	1088	*
rgrover1	544:840f428d18c7	1089	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	544:840f428d18c7	1090	* You should use the parallel API from GattServer directly. A former call
rgrover1	544:840f428d18c7	1091	* to ble.addToDisconnectionCallchain(...) should be replaced with
rgrover1	544:840f428d18c7	1092	* ble.gap().addToDisconnectionCallchain(...).
rgrover1	528:8d21604fe31d	1093	*/
rgrover1	540:1fb1e0b809eb	1094	template<typename T>
rgrover1	544:840f428d18c7	1095	void addToDisconnectionCallChain(T tptr, void (T::mptr)(void)) {
rgrover1	544:840f428d18c7	1096	gap().addToDisconnectionCallChain(tptr, mptr);
rgrover1	544:840f428d18c7	1097	}
rgrover1	528:8d21604fe31d	1098
rgrover1	528:8d21604fe31d	1099	/**
rgrover1	545:45bbdb1d5eca	1100	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	545:45bbdb1d5eca	1101	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	545:45bbdb1d5eca	1102	* radio is in use. The signal is sent using software interrupt.
rgrover1	545:45bbdb1d5eca	1103	*
rgrover1	545:45bbdb1d5eca	1104	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	545:45bbdb1d5eca	1105	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	545:45bbdb1d5eca	1106	* by the application programmer to synchronize application logic with radio
rgrover1	545:45bbdb1d5eca	1107	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	545:45bbdb1d5eca	1108	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	545:45bbdb1d5eca	1109	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	545:45bbdb1d5eca	1110	*
rgrover1	545:45bbdb1d5eca	1111	* @param callback
rgrover1	545:45bbdb1d5eca	1112	* The application handler to be invoked in response to a radio
rgrover1	545:45bbdb1d5eca	1113	* ACTIVE/INACTIVE event.
rgrover1	545:45bbdb1d5eca	1114	*
rgrover1	545:45bbdb1d5eca	1115	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	545:45bbdb1d5eca	1116	* You should use the parallel API from GattServer directly. A former call
rgrover1	545:45bbdb1d5eca	1117	* to ble.onRadioNotification(...) should be replaced with
rgrover1	545:45bbdb1d5eca	1118	* ble.gap().onRadioNotification(...).
rgrover1	545:45bbdb1d5eca	1119	*/
rgrover1	545:45bbdb1d5eca	1120	void onRadioNotification(Gap::RadioNotificationEventCallback_t callback) {
rgrover1	545:45bbdb1d5eca	1121	gap().onRadioNotification(callback);
rgrover1	545:45bbdb1d5eca	1122	}
rgrover1	545:45bbdb1d5eca	1123
rgrover1	545:45bbdb1d5eca	1124	/**
rgrover1	540:1fb1e0b809eb	1125	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	540:1fb1e0b809eb	1126	* updates are sent out by GATT in the form of notifications).
rgrover1	528:8d21604fe31d	1127	*
rgrover1	540:1fb1e0b809eb	1128	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	540:1fb1e0b809eb	1129	* (potentially from different modules of an application) to receive updates
rgrover1	540:1fb1e0b809eb	1130	* to characteristics.
rgrover1	528:8d21604fe31d	1131	*
rgrover1	540:1fb1e0b809eb	1132	* @Note: it is also possible to setup a callback into a member function of
rgrover1	540:1fb1e0b809eb	1133	* some object.
rgrover1	528:8d21604fe31d	1134	*/
rgrover1	540:1fb1e0b809eb	1135	void onDataSent(void (*callback)(unsigned count));
rgrover1	540:1fb1e0b809eb	1136	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count));
rgrover1	528:8d21604fe31d	1137
rgrover1	528:8d21604fe31d	1138	/**
rgrover1	540:1fb1e0b809eb	1139	* Setup a callback for when a characteristic has its value updated by a
rgrover1	540:1fb1e0b809eb	1140	* client.
rgrover1	528:8d21604fe31d	1141	*
rgrover1	540:1fb1e0b809eb	1142	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	540:1fb1e0b809eb	1143	* (potentially from different modules of an application) to receive updates
rgrover1	540:1fb1e0b809eb	1144	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	540:1fb1e0b809eb	1145	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	528:8d21604fe31d	1146	*
rgrover1	540:1fb1e0b809eb	1147	* @Note: it is also possible to setup a callback into a member function of
rgrover1	540:1fb1e0b809eb	1148	* some object.
rgrover1	528:8d21604fe31d	1149	*/
rgrover1	540:1fb1e0b809eb	1150	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP));
rgrover1	540:1fb1e0b809eb	1151	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context));
rgrover1	528:8d21604fe31d	1152
rgrover1	528:8d21604fe31d	1153	/**
rgrover1	540:1fb1e0b809eb	1154	* Setup a callback for when a characteristic is being read by a client.
rgrover1	540:1fb1e0b809eb	1155	*
rgrover1	540:1fb1e0b809eb	1156	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	540:1fb1e0b809eb	1157	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	540:1fb1e0b809eb	1158	* alternative.
rgrover1	540:1fb1e0b809eb	1159	*
rgrover1	540:1fb1e0b809eb	1160	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	540:1fb1e0b809eb	1161	* (potentially from different modules of an application) to receive updates
rgrover1	540:1fb1e0b809eb	1162	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	540:1fb1e0b809eb	1163	* behind the scenes to trap interesting events.
rgrover1	540:1fb1e0b809eb	1164	*
rgrover1	540:1fb1e0b809eb	1165	* @Note: it is also possible to setup a callback into a member function of
rgrover1	540:1fb1e0b809eb	1166	* some object.
rgrover1	540:1fb1e0b809eb	1167	*
rgrover1	540:1fb1e0b809eb	1168	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	540:1fb1e0b809eb	1169	* else BLE_ERROR_NONE.
rgrover1	528:8d21604fe31d	1170	*/
rgrover1	540:1fb1e0b809eb	1171	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP));
rgrover1	540:1fb1e0b809eb	1172	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context));
rgrover1	540:1fb1e0b809eb	1173
rgrover1	540:1fb1e0b809eb	1174	void onUpdatesEnabled(GattServer::EventCallback_t callback);
rgrover1	540:1fb1e0b809eb	1175	void onUpdatesDisabled(GattServer::EventCallback_t callback);
rgrover1	540:1fb1e0b809eb	1176	void onConfirmationReceived(GattServer::EventCallback_t callback);
rgrover1	528:8d21604fe31d	1177
rgrover1	546:9fdf3d960d12	1178	/**
rgrover1	546:9fdf3d960d12	1179	* Setup a callback for when the security setup procedure (key generation
rgrover1	546:9fdf3d960d12	1180	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	546:9fdf3d960d12	1181	* devices. The callback is passed in parameters received from the peer's
rgrover1	546:9fdf3d960d12	1182	* security request: bool allowBonding, bool requireMITM, and
rgrover1	546:9fdf3d960d12	1183	* SecurityIOCapabilities_t.
rgrover1	546:9fdf3d960d12	1184	*
rgrover1	546:9fdf3d960d12	1185	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1186	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1187	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1	546:9fdf3d960d12	1188	* ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1	546:9fdf3d960d12	1189	*/
rgrover1	546:9fdf3d960d12	1190	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1	546:9fdf3d960d12	1191	securityManager().onSecuritySetupInitiated(callback);
rgrover1	546:9fdf3d960d12	1192	}
rgrover1	546:9fdf3d960d12	1193
rgrover1	546:9fdf3d960d12	1194	/**
rgrover1	546:9fdf3d960d12	1195	* Setup a callback for when the security setup procedure (key generation
rgrover1	546:9fdf3d960d12	1196	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	546:9fdf3d960d12	1197	* devices. The callback is passed in the success/failure status of the
rgrover1	546:9fdf3d960d12	1198	* security setup procedure.
rgrover1	546:9fdf3d960d12	1199	*
rgrover1	546:9fdf3d960d12	1200	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1201	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1202	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1	546:9fdf3d960d12	1203	* ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1	546:9fdf3d960d12	1204	*/
rgrover1	546:9fdf3d960d12	1205	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1	546:9fdf3d960d12	1206	securityManager().onSecuritySetupCompleted(callback);
rgrover1	546:9fdf3d960d12	1207	}
rgrover1	546:9fdf3d960d12	1208
rgrover1	546:9fdf3d960d12	1209	/**
rgrover1	546:9fdf3d960d12	1210	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	546:9fdf3d960d12	1211	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	546:9fdf3d960d12	1212	* this callback when the link is secured and setup procedures will not
rgrover1	546:9fdf3d960d12	1213	* occur unless the bonding information is either lost or deleted on either
rgrover1	546:9fdf3d960d12	1214	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1	546:9fdf3d960d12	1215	* to the level of security in effect for the secured link.
rgrover1	546:9fdf3d960d12	1216	*
rgrover1	546:9fdf3d960d12	1217	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1218	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1219	* call to ble.onLinkSecured(callback) should be replaced with
rgrover1	546:9fdf3d960d12	1220	* ble.securityManager().onLinkSecured(callback).
rgrover1	546:9fdf3d960d12	1221	*/
rgrover1	546:9fdf3d960d12	1222	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1	546:9fdf3d960d12	1223	securityManager().onLinkSecured(callback);
rgrover1	546:9fdf3d960d12	1224	}
rgrover1	546:9fdf3d960d12	1225
rgrover1	546:9fdf3d960d12	1226	/**
rgrover1	546:9fdf3d960d12	1227	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	546:9fdf3d960d12	1228	* context is stored persistently for a peer device.
rgrover1	546:9fdf3d960d12	1229	*
rgrover1	546:9fdf3d960d12	1230	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1231	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1232	* call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1	546:9fdf3d960d12	1233	* ble.securityManager().onSecurityContextStored(callback).
rgrover1	546:9fdf3d960d12	1234	*/
rgrover1	546:9fdf3d960d12	1235	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1	546:9fdf3d960d12	1236	securityManager().onSecurityContextStored(callback);
rgrover1	546:9fdf3d960d12	1237	}
rgrover1	546:9fdf3d960d12	1238
rgrover1	546:9fdf3d960d12	1239	/**
rgrover1	546:9fdf3d960d12	1240	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	546:9fdf3d960d12	1241	* peripheral with DISPLAY capability. This happens when security is
rgrover1	546:9fdf3d960d12	1242	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	546:9fdf3d960d12	1243	* needs to be exchanged between the peers to authenticate the connection
rgrover1	546:9fdf3d960d12	1244	* attempt.
rgrover1	546:9fdf3d960d12	1245	*
rgrover1	546:9fdf3d960d12	1246	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	546:9fdf3d960d12	1247	* You should use the parallel API from SecurityManager directly. A former
rgrover1	546:9fdf3d960d12	1248	* call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1	546:9fdf3d960d12	1249	* ble.securityManager().onPasskeyDisplay(callback).
rgrover1	546:9fdf3d960d12	1250	*/
rgrover1	546:9fdf3d960d12	1251	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1	546:9fdf3d960d12	1252	return securityManager().onPasskeyDisplay(callback);
rgrover1	546:9fdf3d960d12	1253	}
rgrover1	546:9fdf3d960d12	1254
rgrover1	528:8d21604fe31d	1255	public:
rgrover1	531:bdcd44b03974	1256	BLE() : transport(createBLEInstance()) {
rgrover1	531:bdcd44b03974	1257	/* empty */
rgrover1	528:8d21604fe31d	1258	}
rgrover1	528:8d21604fe31d	1259
rgrover1	528:8d21604fe31d	1260	private:
rgrover1	528:8d21604fe31d	1261	BLEInstanceBase const transport; / the device specific backend */
rgrover1	528:8d21604fe31d	1262	};
rgrover1	528:8d21604fe31d	1263
rgrover1	537:00d5affbb2b2	1264	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	528:8d21604fe31d	1265	* code. Will be dropped at some point soon.*/
rgrover1	528:8d21604fe31d	1266
rgrover1	528:8d21604fe31d	1267	/* BLE methods. Most of these simply forward the calls to the underlying
rgrover1	528:8d21604fe31d	1268	* transport.*/
rgrover1	528:8d21604fe31d	1269
rgrover1	528:8d21604fe31d	1270	inline void
rgrover1	528:8d21604fe31d	1271	BLE::onDataSent(void (*callback)(unsigned count)) {
rgrover1	528:8d21604fe31d	1272	transport->getGattServer().setOnDataSent(callback);
rgrover1	528:8d21604fe31d	1273	}
rgrover1	528:8d21604fe31d	1274
rgrover1	528:8d21604fe31d	1275	template <typename T> inline void
rgrover1	528:8d21604fe31d	1276	BLE::onDataSent(T objPtr, void (T::memberPtr)(unsigned count)) {
rgrover1	528:8d21604fe31d	1277	transport->getGattServer().setOnDataSent(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1278	}
rgrover1	528:8d21604fe31d	1279
rgrover1	528:8d21604fe31d	1280	inline void
rgrover1	528:8d21604fe31d	1281	BLE::onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	528:8d21604fe31d	1282	transport->getGattServer().setOnDataWritten(callback);
rgrover1	528:8d21604fe31d	1283	}
rgrover1	528:8d21604fe31d	1284
rgrover1	528:8d21604fe31d	1285	template <typename T> inline void
rgrover1	528:8d21604fe31d	1286	BLE::onDataWritten(T objPtr, void (T::memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1	528:8d21604fe31d	1287	transport->getGattServer().setOnDataWritten(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1288	}
rgrover1	528:8d21604fe31d	1289
rgrover1	528:8d21604fe31d	1290	inline ble_error_t
rgrover1	528:8d21604fe31d	1291	BLE::onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	528:8d21604fe31d	1292	return transport->getGattServer().setOnDataRead(callback);
rgrover1	528:8d21604fe31d	1293	}
rgrover1	528:8d21604fe31d	1294
rgrover1	528:8d21604fe31d	1295	template <typename T> inline ble_error_t
rgrover1	528:8d21604fe31d	1296	BLE::onDataRead(T objPtr, void (T::memberPtr)(const GattReadCallbackParams *context)) {
rgrover1	528:8d21604fe31d	1297	return transport->getGattServer().setOnDataRead(objPtr, memberPtr);
rgrover1	528:8d21604fe31d	1298	}
rgrover1	528:8d21604fe31d	1299
rgrover1	528:8d21604fe31d	1300	inline void
rgrover1	528:8d21604fe31d	1301	BLE::onUpdatesEnabled(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1302	{
rgrover1	528:8d21604fe31d	1303	transport->getGattServer().setOnUpdatesEnabled(callback);
rgrover1	528:8d21604fe31d	1304	}
rgrover1	528:8d21604fe31d	1305
rgrover1	528:8d21604fe31d	1306	inline void
rgrover1	528:8d21604fe31d	1307	BLE::onUpdatesDisabled(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1308	{
rgrover1	528:8d21604fe31d	1309	transport->getGattServer().setOnUpdatesDisabled(callback);
rgrover1	528:8d21604fe31d	1310	}
rgrover1	528:8d21604fe31d	1311
rgrover1	528:8d21604fe31d	1312	inline void
rgrover1	528:8d21604fe31d	1313	BLE::onConfirmationReceived(GattServer::EventCallback_t callback)
rgrover1	528:8d21604fe31d	1314	{
rgrover1	528:8d21604fe31d	1315	transport->getGattServer().setOnConfirmationReceived(callback);
rgrover1	528:8d21604fe31d	1316	}
rgrover1	528:8d21604fe31d	1317
rgrover1	528:8d21604fe31d	1318	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	22 Mar 2016
Imports:	2
Forks:	0
Commits:	1132
Dependents:	0
Dependencies:	0
Followers:	1

public/BLE.h@546:9fdf3d960d12, 2015-06-19 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning