Revision 3:8f43ffa0251e, committed 2019-06-24

Comitter:

wajahat.abbas@u-blox.com

Date:

Mon Jun 24 12:49:40 2019 +0500

Parent:

2:0d940d7fc284

Commit message:

Updated example to be aligned with example-ublox-cellular-interface

Changed in this revision

diff -r 0d940d7fc284 -r 8f43ffa0251e main.cpp
--- a/main.cpp	Mon Jun 17 17:06:17 2019 +0500
+++ b/main.cpp	Mon Jun 24 12:49:40 2019 +0500
@@ -13,7 +13,6 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-
 #include "mbed.h"
 #include "UbloxATCellularInterface.h"
 #include "UbloxATCellularInterfaceN2xx.h"
@@ -27,9 +26,9 @@
 // UbloxATCellularInterfaceN2xx   -            Y           -
 // Note: the N211 module supports only UDP, not TCP
 
-// UbloxATCellularInterface and UbloxATCellularInterfaceN2xx uses an IP stack on the cellular
-// module and hence uses less RAM (significant on C027).  This also
-// allows other AT command operations (e.g. sending an SMS) to happen
+// UbloxATCellularInterface and UbloxATCellularInterfaceN2xx
+// uses an IP stack on the cellular module and hence uses less RAM (significant on C027).
+// This also allows other AT command operations (e.g. sending an SMS) to happen
 // during a data transfer (for which you should replace the
 // UbloxATCellularInterface library with the UbloxATCellularInterfaceExt
 // library).  However, it is slower than using the LWIP/PPP on the mbed
@@ -156,11 +155,10 @@
 #endif
 
 /* This example program for the u-blox C030 and C027 boards instantiates
- * the UbloxATCellularInterface or OnboardCellularInterface and uses it
- * to make a simple sockets connection to a server, using 2.pool.ntp.org
- * for UDP and developer.mbed.org for TCP.  For a more comprehensive example,
- * where higher layer protocols make use of the same sockets interface,
- * see example-ublox-mbed-client.
+ * the UbloxATCellularInterface and uses it to make a simple sockets
+ * connection to a server, using 2.pool.ntp.org for UDP and developer.mbed.org for TCP.
+ * For a more comprehensive example, where higher layer protocols
+ * make use of the same sockets interface, see example-ublox-mbed-client.
  * Progress may be monitored with a serial terminal running at 9600 baud.
  * The LED on the C030 board will turn green when this program is
  * operating correctly, pulse blue when a sockets operation is completed
@@ -203,7 +201,7 @@
     interface->set_credentials(APN, USERNAME, PASSWORD);
     interface->init(PIN);
 
-    printf("Checking if already registered !\n");
+    printf("Checking if already registered!\n");
 
     if ( (interface->is_registered_csd() || interface->is_registered_psd() || interface->is_registered_eps()) ) {
         printf("De-registering...\n\n");
@@ -254,7 +252,7 @@
 #endif
 #endif
 
-    printf("Getting the IP address of \"developer.mbed.org\" and \"2.pool.ntp.org\"...\n");
+    printf("Getting the IP address of \"" TCP_SERVER "\" and \"2.pool.ntp.org\"...\n");
     if ((interface->gethostbyname("2.pool.ntp.org", &udpServer) == 0) &&
         (interface->gethostbyname(TCP_SERVER, &tcpServer) == 0)) {
         pulseEvent();

diff -r 0d940d7fc284 -r 8f43ffa0251e ublox-cellular-base.lib
--- a/ublox-cellular-base.lib	Mon Jun 17 17:06:17 2019 +0500
+++ b/ublox-cellular-base.lib	Mon Jun 24 12:49:40 2019 +0500
@@ -1,1 +1,1 @@
-https://os.mbed.com/users/Wajahat/code/ublox-cellular-base_upsv/
+https://developer.mbed.org/teams/ublox/code/ublox-cellular-base/#e67d3d9d2e7e
\ No newline at end of file