u-blox
Example program running mbedClient over UbloxATCellularInterface or OnboardCellularInterface for the C030 platform.
Dependencies: ublox-cellular-base ublox-at-cellular-interface ublox-ppp-cellular-interface ublox-at-cellular-interface-n2xx ublox-cellular-base-n2xx
Revision 16:d4f4a9dfa938, committed 2018-02-28
- Comitter:
- RobMeades
- Date:
- Wed Feb 28 14:58:04 2018 +0000
- Parent:
- 15:21e0bf60dd0c
- Commit message:
- Update to latest libraries and replace UbloxPPPCellularInterface with OnboardCellularInterface.
Changed in this revision
diff -r 21e0bf60dd0c -r d4f4a9dfa938 main.cpp
--- a/main.cpp Fri Nov 03 13:04:06 2017 +0000
+++ b/main.cpp Wed Feb 28 14:58:04 2018 +0000
@@ -23,7 +23,7 @@
#include "mbed.h"
#include "mbedtls/entropy_poll.h"
#include "UbloxATCellularInterface.h"
-#include "UbloxPPPCellularInterface.h"
+#include "OnboardCellularInterface.h"
#include "UbloxATCellularInterfaceN2xx.h"
#include "simpleclient.h"
#include "security.h"
@@ -35,12 +35,12 @@
// indicated with a "Y" in the table below.
//
// C030_U201 C030_N211
-// UbloxPPPCellularInterface Y -
// UbloxATCellularInterface Y -
+// OnboardCellularInterface Y -
// UbloxATCellularInterfaceN2xx - Y
// Note: the N211 module supports only UDP, not TCP
-// UbloxPPPCellularInterface uses LWIP and the PPP cellular interface
+// OnboardCellularInterface uses LWIP and the PPP cellular interface
// on the mbed MCU, while using UbloxATCellularInterface and
// UbloxATCellularInterfaceN2xx uses an IP stack on the cellular
// module and hence uses less RAM. This also allows other AT command
@@ -50,7 +50,7 @@
// using the LWIP/PPP on the mbed MCU interface since more string parsing
// is required.
#define INTERFACE_CLASS UbloxATCellularInterface
-//#define INTERFACE_CLASS UbloxPPPCellularInterface
+//#define INTERFACE_CLASS OnboardCellularInterface
//#define INTERFACE_CLASS UbloxATCellularInterfaceN2xx
// The credentials of the SIM in the board. If PIN checking is enabled
@@ -149,7 +149,7 @@
}
/* This example program for the u-blox C030 board instantiates mbedClient
- * and runs it over a UbloxATCellularInterface or a UbloxPPPCellularInterface to
+ * and runs it over a UbloxATCellularInterface or a OnboardCellularInterface to
* the mbed connector.
* Progress may be monitored with a serial terminal running at 9600 baud.
* The LED on the C030 board will turn green when this program is
@@ -200,58 +200,51 @@
good();
printf("Starting up, please wait up to 180 seconds for network registration to complete...\n");
- if (interface->init(PIN)) {
- pulseEvent();
- printf("Registered with network.\n");
+ pulseEvent();
- // Create endpoint interface to manage register and unregister
- mbedClient->create_interface("coap://api.connector.mbed.com:5684", interface);
+ // Create endpoint interface to manage register and unregister
+ mbedClient->create_interface("coap://api.connector.mbed.com:5684", interface);
- // Create objects of varying types, see simpleclient.h for more details on implementation.
- registerObject = mbedClient->create_register_object(); // Server object specifying connector info
- deviceObject = mbedClient->create_device_object(); // Device resources object
+ // Create objects of varying types, see simpleclient.h for more details on implementation.
+ registerObject = mbedClient->create_register_object(); // Server object specifying connector info
+ deviceObject = mbedClient->create_device_object(); // Device resources object
- // Add objects to list
- objectList.push_back(deviceObject);
- objectList.push_back(ledResource.get_object());
+ // Add objects to list
+ objectList.push_back(deviceObject);
+ objectList.push_back(ledResource.get_object());
- // Set endpoint registration object
- mbedClient->set_register_object(registerObject);
+ // Set endpoint registration object
+ mbedClient->set_register_object(registerObject);
- printf("Updating object registration in a loop (with a 30 second refresh period) until the user button is presed...\n");
- interface->set_credentials(APN, USERNAME, PASSWORD);
- while (!buttonPressed) {
- // Make sure cellular is connected
- if (interface->connect() == 0) {
- pulseEvent();
- printf("[Still] connected to packet network.\n");
- if (mbedClient->register_successful()) {
- printf("Updating registration (follow progress at https://connector.mbed.com/#home)...\n");
- mbedClient->test_update_register();
- } else {
- printf("Registering with connector (follow progress at https://connector.mbed.com/#home)...\n");
- mbedClient->test_register(registerObject, objectList);
- }
+ printf("Updating object registration in a loop (with a 30 second refresh period) until the user button is presed...\n");
+ interface->set_credentials(APN, USERNAME, PASSWORD);
+ while (!buttonPressed) {
+ // Make sure cellular is connected
+ if (interface->connect(PIN) == 0) {
+ pulseEvent();
+ printf("[Still] connected to packet network.\n");
+ if (mbedClient->register_successful()) {
+ printf("Updating registration (follow progress at https://connector.mbed.com/#home)...\n");
+ mbedClient->test_update_register();
} else {
- bad();
- printf("Failed to connect, will retry (have you checked that an antenna is plugged in and your APN is correct?)...\n");
+ printf("Registering with connector (follow progress at https://connector.mbed.com/#home)...\n");
+ mbedClient->test_register(registerObject, objectList);
}
- Thread::wait(30000);
- printf("[Checking if user button has been pressed]\n");
+ } else {
+ bad();
+ printf("Failed to connect, will retry (have you checked that an antenna is plugged in and your APN is correct?)...\n");
}
-
- pulseEvent();
- printf("User button was pressed, stopping...\n");
- mbedClient->test_unregister();
- interface->disconnect();
- interface->deinit();
- ledOff();
- printf("Stopped.\n");
- M2MDevice::delete_instance();
- } else {
- bad();
- printf("Unable to initialise the interface.\n");
+ Thread::wait(30000);
+ printf("[Checking if user button has been pressed]\n");
}
+
+ pulseEvent();
+ printf("User button was pressed, stopping...\n");
+ mbedClient->test_unregister();
+ interface->disconnect();
+ ledOff();
+ printf("Stopped.\n");
+ M2MDevice::delete_instance();
}
// End Of File
diff -r 21e0bf60dd0c -r d4f4a9dfa938 mbed-os.lib --- a/mbed-os.lib Fri Nov 03 13:04:06 2017 +0000 +++ b/mbed-os.lib Wed Feb 28 14:58:04 2018 +0000 @@ -1,1 +1,1 @@ -https://github.com/ARMmbed/mbed-os/#78a1eddf61efa705ef1e99fc597dcaa5e737fb4c +https://github.com/ARMmbed/mbed-os/#eaf6f8153d8b8c2d3136f288ca3c5d4fbc1ae18f
diff -r 21e0bf60dd0c -r d4f4a9dfa938 ublox-at-cellular-interface-n2xx.lib --- a/ublox-at-cellular-interface-n2xx.lib Fri Nov 03 13:04:06 2017 +0000 +++ b/ublox-at-cellular-interface-n2xx.lib Wed Feb 28 14:58:04 2018 +0000 @@ -1,1 +1,1 @@ -https://developer.mbed.org/teams/ublox/code/ublox-at-cellular-interface-n2xx/#4be20bab5138 +https://developer.mbed.org/teams/ublox/code/ublox-at-cellular-interface-n2xx/#b0757007cc72
diff -r 21e0bf60dd0c -r d4f4a9dfa938 ublox-at-cellular-interface.lib --- a/ublox-at-cellular-interface.lib Fri Nov 03 13:04:06 2017 +0000 +++ b/ublox-at-cellular-interface.lib Wed Feb 28 14:58:04 2018 +0000 @@ -1,1 +1,1 @@ -https://developer.mbed.org/teams/ublox/code/ublox-at-cellular-interface/#edac5187d765 +https://developer.mbed.org/teams/ublox/code/ublox-at-cellular-interface/#39264b492ce7
diff -r 21e0bf60dd0c -r d4f4a9dfa938 ublox-cellular-base-n2xx.lib --- a/ublox-cellular-base-n2xx.lib Fri Nov 03 13:04:06 2017 +0000 +++ b/ublox-cellular-base-n2xx.lib Wed Feb 28 14:58:04 2018 +0000 @@ -1,1 +1,1 @@ -https://developer.mbed.org/teams/ublox/code/ublox-cellular-base-n2xx/#66451d314225 +https://developer.mbed.org/teams/ublox/code/ublox-cellular-base-n2xx/#1afe5ed24f0c
diff -r 21e0bf60dd0c -r d4f4a9dfa938 ublox-cellular-base.lib --- a/ublox-cellular-base.lib Fri Nov 03 13:04:06 2017 +0000 +++ b/ublox-cellular-base.lib Wed Feb 28 14:58:04 2018 +0000 @@ -1,1 +1,1 @@ -https://developer.mbed.org/teams/ublox/code/ublox-cellular-base/#8fadf1e49487 +https://developer.mbed.org/teams/ublox/code/ublox-cellular-base/#e420232ee4e7
diff -r 21e0bf60dd0c -r d4f4a9dfa938 ublox-ppp-cellular-interface.lib --- a/ublox-ppp-cellular-interface.lib Fri Nov 03 13:04:06 2017 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -https://developer.mbed.org/teams/ublox/code/ublox-ppp-cellular-interface/#4c533665168c