u-blox / easy-connect

Version of easy-connect with the u-blox cellular platforms C027 and C030 added.

Dependents:   HelloMQTT

esp8266-driver/ESP8266/ATParser/BufferedSerial/BufferedSerial.h@0:19aa55d66228, 2017-08-10 (annotated)

Committer:
group-ublox
Date:
Thu Aug 10 14:33:05 2017 +0000
Revision:
0:19aa55d66228
Initial commit

Who changed what in which revision?

UserRevisionLine numberNew contents of line
group-ublox 0:19aa55d66228 1
group-ublox 0:19aa55d66228 2 /**
group-ublox 0:19aa55d66228 3 * @file BufferedSerial.h
group-ublox 0:19aa55d66228 4 * @brief Software Buffer - Extends mbed Serial functionallity adding irq driven TX and RX
group-ublox 0:19aa55d66228 5 * @author sam grove
group-ublox 0:19aa55d66228 6 * @version 1.0
group-ublox 0:19aa55d66228 7 * @see
group-ublox 0:19aa55d66228 8 *
group-ublox 0:19aa55d66228 9 * Copyright (c) 2013
group-ublox 0:19aa55d66228 10 *
group-ublox 0:19aa55d66228 11 * Licensed under the Apache License, Version 2.0 (the "License");
group-ublox 0:19aa55d66228 12 * you may not use this file except in compliance with the License.
group-ublox 0:19aa55d66228 13 * You may obtain a copy of the License at
group-ublox 0:19aa55d66228 14 *
group-ublox 0:19aa55d66228 15 * http://www.apache.org/licenses/LICENSE-2.0
group-ublox 0:19aa55d66228 16 *
group-ublox 0:19aa55d66228 17 * Unless required by applicable law or agreed to in writing, software
group-ublox 0:19aa55d66228 18 * distributed under the License is distributed on an "AS IS" BASIS,
group-ublox 0:19aa55d66228 19 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
group-ublox 0:19aa55d66228 20 * See the License for the specific language governing permissions and
group-ublox 0:19aa55d66228 21 * limitations under the License.
group-ublox 0:19aa55d66228 22 */
group-ublox 0:19aa55d66228 23
group-ublox 0:19aa55d66228 24 #ifndef BUFFEREDSERIAL_H
group-ublox 0:19aa55d66228 25 #define BUFFEREDSERIAL_H
group-ublox 0:19aa55d66228 26
group-ublox 0:19aa55d66228 27 #include "mbed.h"
group-ublox 0:19aa55d66228 28 #include "MyBuffer.h"
group-ublox 0:19aa55d66228 29
group-ublox 0:19aa55d66228 30 /** A serial port (UART) for communication with other serial devices
group-ublox 0:19aa55d66228 31 *
group-ublox 0:19aa55d66228 32 * Can be used for Full Duplex communication, or Simplex by specifying
group-ublox 0:19aa55d66228 33 * one pin as NC (Not Connected)
group-ublox 0:19aa55d66228 34 *
group-ublox 0:19aa55d66228 35 * Example:
group-ublox 0:19aa55d66228 36 * @code
group-ublox 0:19aa55d66228 37 * #include "mbed.h"
group-ublox 0:19aa55d66228 38 * #include "BufferedSerial.h"
group-ublox 0:19aa55d66228 39 *
group-ublox 0:19aa55d66228 40 * BufferedSerial pc(USBTX, USBRX);
group-ublox 0:19aa55d66228 41 *
group-ublox 0:19aa55d66228 42 * int main()
group-ublox 0:19aa55d66228 43 * {
group-ublox 0:19aa55d66228 44 * while(1)
group-ublox 0:19aa55d66228 45 * {
group-ublox 0:19aa55d66228 46 * Timer s;
group-ublox 0:19aa55d66228 47 *
group-ublox 0:19aa55d66228 48 * s.start();
group-ublox 0:19aa55d66228 49 * pc.printf("Hello World - buffered\n");
group-ublox 0:19aa55d66228 50 * int buffered_time = s.read_us();
group-ublox 0:19aa55d66228 51 * wait(0.1f); // give time for the buffer to empty
group-ublox 0:19aa55d66228 52 *
group-ublox 0:19aa55d66228 53 * s.reset();
group-ublox 0:19aa55d66228 54 * printf("Hello World - blocking\n");
group-ublox 0:19aa55d66228 55 * int polled_time = s.read_us();
group-ublox 0:19aa55d66228 56 * s.stop();
group-ublox 0:19aa55d66228 57 * wait(0.1f); // give time for the buffer to empty
group-ublox 0:19aa55d66228 58 *
group-ublox 0:19aa55d66228 59 * pc.printf("printf buffered took %d us\n", buffered_time);
group-ublox 0:19aa55d66228 60 * pc.printf("printf blocking took %d us\n", polled_time);
group-ublox 0:19aa55d66228 61 * wait(0.5f);
group-ublox 0:19aa55d66228 62 * }
group-ublox 0:19aa55d66228 63 * }
group-ublox 0:19aa55d66228 64 * @endcode
group-ublox 0:19aa55d66228 65 */
group-ublox 0:19aa55d66228 66
group-ublox 0:19aa55d66228 67 /**
group-ublox 0:19aa55d66228 68 * @class BufferedSerial
group-ublox 0:19aa55d66228 69 * @brief Software buffers and interrupt driven tx and rx for Serial
group-ublox 0:19aa55d66228 70 */
group-ublox 0:19aa55d66228 71 class BufferedSerial : public RawSerial
group-ublox 0:19aa55d66228 72 {
group-ublox 0:19aa55d66228 73 private:
group-ublox 0:19aa55d66228 74 MyBuffer <char> _rxbuf;
group-ublox 0:19aa55d66228 75 MyBuffer <char> _txbuf;
group-ublox 0:19aa55d66228 76 uint32_t _buf_size;
group-ublox 0:19aa55d66228 77 uint32_t _tx_multiple;
group-ublox 0:19aa55d66228 78
group-ublox 0:19aa55d66228 79 void rxIrq(void);
group-ublox 0:19aa55d66228 80 void txIrq(void);
group-ublox 0:19aa55d66228 81 void prime(void);
group-ublox 0:19aa55d66228 82
group-ublox 0:19aa55d66228 83 Callback<void()> _cbs[2];
group-ublox 0:19aa55d66228 84
group-ublox 0:19aa55d66228 85 public:
group-ublox 0:19aa55d66228 86 /** Create a BufferedSerial port, connected to the specified transmit and receive pins
group-ublox 0:19aa55d66228 87 * @param tx Transmit pin
group-ublox 0:19aa55d66228 88 * @param rx Receive pin
group-ublox 0:19aa55d66228 89 * @param buf_size printf() buffer size
group-ublox 0:19aa55d66228 90 * @param tx_multiple amount of max printf() present in the internal ring buffer at one time
group-ublox 0:19aa55d66228 91 * @param name optional name
group-ublox 0:19aa55d66228 92 * @note Either tx or rx may be specified as NC if unused
group-ublox 0:19aa55d66228 93 */
group-ublox 0:19aa55d66228 94 BufferedSerial(PinName tx, PinName rx, uint32_t buf_size = 256, uint32_t tx_multiple = 4,const char* name=NULL);
group-ublox 0:19aa55d66228 95
group-ublox 0:19aa55d66228 96 /** Destroy a BufferedSerial port
group-ublox 0:19aa55d66228 97 */
group-ublox 0:19aa55d66228 98 virtual ~BufferedSerial(void);
group-ublox 0:19aa55d66228 99
group-ublox 0:19aa55d66228 100 /** Check on how many bytes are in the rx buffer
group-ublox 0:19aa55d66228 101 * @return 1 if something exists, 0 otherwise
group-ublox 0:19aa55d66228 102 */
group-ublox 0:19aa55d66228 103 virtual int readable(void);
group-ublox 0:19aa55d66228 104
group-ublox 0:19aa55d66228 105 /** Check to see if the tx buffer has room
group-ublox 0:19aa55d66228 106 * @return 1 always has room and can overwrite previous content if too small / slow
group-ublox 0:19aa55d66228 107 */
group-ublox 0:19aa55d66228 108 virtual int writeable(void);
group-ublox 0:19aa55d66228 109
group-ublox 0:19aa55d66228 110 /** Get a single byte from the BufferedSerial Port.
group-ublox 0:19aa55d66228 111 * Should check readable() before calling this.
group-ublox 0:19aa55d66228 112 * @return A byte that came in on the Serial Port
group-ublox 0:19aa55d66228 113 */
group-ublox 0:19aa55d66228 114 virtual int getc(void);
group-ublox 0:19aa55d66228 115
group-ublox 0:19aa55d66228 116 /** Write a single byte to the BufferedSerial Port.
group-ublox 0:19aa55d66228 117 * @param c The byte to write to the Serial Port
group-ublox 0:19aa55d66228 118 * @return The byte that was written to the Serial Port Buffer
group-ublox 0:19aa55d66228 119 */
group-ublox 0:19aa55d66228 120 virtual int putc(int c);
group-ublox 0:19aa55d66228 121
group-ublox 0:19aa55d66228 122 /** Write a string to the BufferedSerial Port. Must be NULL terminated
group-ublox 0:19aa55d66228 123 * @param s The string to write to the Serial Port
group-ublox 0:19aa55d66228 124 * @return The number of bytes written to the Serial Port Buffer
group-ublox 0:19aa55d66228 125 */
group-ublox 0:19aa55d66228 126 virtual int puts(const char *s);
group-ublox 0:19aa55d66228 127
group-ublox 0:19aa55d66228 128 /** Write a formatted string to the BufferedSerial Port.
group-ublox 0:19aa55d66228 129 * @param format The string + format specifiers to write to the Serial Port
group-ublox 0:19aa55d66228 130 * @return The number of bytes written to the Serial Port Buffer
group-ublox 0:19aa55d66228 131 */
group-ublox 0:19aa55d66228 132 virtual int printf(const char* format, ...);
group-ublox 0:19aa55d66228 133
group-ublox 0:19aa55d66228 134 /** Write data to the Buffered Serial Port
group-ublox 0:19aa55d66228 135 * @param s A pointer to data to send
group-ublox 0:19aa55d66228 136 * @param length The amount of data being pointed to
group-ublox 0:19aa55d66228 137 * @return The number of bytes written to the Serial Port Buffer
group-ublox 0:19aa55d66228 138 */
group-ublox 0:19aa55d66228 139 virtual ssize_t write(const void *s, std::size_t length);
group-ublox 0:19aa55d66228 140
group-ublox 0:19aa55d66228 141 /** Attach a function to call whenever a serial interrupt is generated
group-ublox 0:19aa55d66228 142 * @param func A pointer to a void function, or 0 to set as none
group-ublox 0:19aa55d66228 143 * @param type Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)
group-ublox 0:19aa55d66228 144 */
group-ublox 0:19aa55d66228 145 virtual void attach(Callback<void()> func, IrqType type=RxIrq);
group-ublox 0:19aa55d66228 146
group-ublox 0:19aa55d66228 147 /** Attach a member function to call whenever a serial interrupt is generated
group-ublox 0:19aa55d66228 148 * @param obj pointer to the object to call the member function on
group-ublox 0:19aa55d66228 149 * @param method pointer to the member function to call
group-ublox 0:19aa55d66228 150 * @param type Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)
group-ublox 0:19aa55d66228 151 */
group-ublox 0:19aa55d66228 152 template <typename T>
group-ublox 0:19aa55d66228 153 void attach(T *obj, void (T::*method)(), IrqType type=RxIrq) {
group-ublox 0:19aa55d66228 154 attach(Callback<void()>(obj, method), type);
group-ublox 0:19aa55d66228 155 }
group-ublox 0:19aa55d66228 156
group-ublox 0:19aa55d66228 157 /** Attach a member function to call whenever a serial interrupt is generated
group-ublox 0:19aa55d66228 158 * @param obj pointer to the object to call the member function on
group-ublox 0:19aa55d66228 159 * @param method pointer to the member function to call
group-ublox 0:19aa55d66228 160 * @param type Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)
group-ublox 0:19aa55d66228 161 */
group-ublox 0:19aa55d66228 162 template <typename T>
group-ublox 0:19aa55d66228 163 void attach(T *obj, void (*method)(T*), IrqType type=RxIrq) {
group-ublox 0:19aa55d66228 164 attach(Callback<void()>(obj, method), type);
group-ublox 0:19aa55d66228 165 }
group-ublox 0:19aa55d66228 166 };
group-ublox 0:19aa55d66228 167
group-ublox 0:19aa55d66228 168 #endif