u-blox / C027_Support

support library for C027 helper functions for Buffer Pipes, Buffered Serial Port (rtos capable) and GPS parsing. It includes modem APIs for USSD, SMS and Sockets.

Dependents:   HTTPClient_Cellular_HelloWorld Cellular_HelloMQTT MbedSmartRestMain Car_Bon_car_module ... more

This library is intended to be used with u-blox products such as the C027 or a shield with u-blox cellular and GPS modules like the cellular and positioning shield from Embedded Artist.

For 2G/GSM and 3G/UMTS you need to:

  • have a SIM card and know its PIN number
  • need to know you network operators APN setting These setting should be passed to the connect or init and join functions. You can also extend the APN database in MDMAPN.h.

For CDMA products you need to make sure that you have provisioned and activated the modem with either Sprint or Verizon.

Diff: MDM.cpp

Revision:
127:c1c27d0f53c5
Parent:
126:bfbb9e19f6e0
Child:
128:0415646a9934
diff -r bfbb9e19f6e0 -r c1c27d0f53c5 MDM.cpp
--- a/MDM.cpp	Thu Aug 20 16:40:55 2015 +0000
+++ b/MDM.cpp	Fri Aug 21 07:37:49 2015 +0000
@@ -753,12 +753,12 @@
             const char* config = NULL;
             if (!apn && !username && !password)
                 config = apnconfig(_dev.imsi);
-/*NOT SUP*/ if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2)) {
-                // Set up the dynamic IP address assignment.
-                sendFormated("AT+UPSD=" PROFILE ",7,\"0.0.0.0\"\r\n");
-                if (RESP_OK != waitFinalResp())
-                    goto failure;
-/*NOT SUP*/ }
+/**** NOT SUPPORTED YET ****/ if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2)) {
+            // Set up the dynamic IP address assignment.
+            sendFormated("AT+UPSD=" PROFILE ",7,\"0.0.0.0\"\r\n");
+            if (RESP_OK != waitFinalResp())
+                goto failure;
+/**** NOT SUPPORTED YET ****/ }
             do {
                 if (config) {
                     apn      = _APN_GET(config);
@@ -793,12 +793,12 @@
                 // 2 = CHAP (Challenge Handshake Authentication Protocol)
                 for (int i = AUTH_NONE; i <= AUTH_CHAP && !ok; i ++) {
                     if ((auth == AUTH_DETECT) || (auth == i)) {
-/*NOT SUP*/             if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2)) {
-                            // Set up the Authentication Protocol
-                            sendFormated("AT+UPSD=" PROFILE ",6,%d\r\n",i);
-                            if (RESP_OK != waitFinalResp())
-                                goto failure;
-/*NOT SUP*/             }
+/**** NOT SUPPORTED YET ****/ if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2)) {
+                        // Set up the Authentication Protocol
+                        sendFormated("AT+UPSD=" PROFILE ",6,%d\r\n",i);
+                        if (RESP_OK != waitFinalResp())
+                            goto failure;
+/**** NOT SUPPORTED YET ****/ }
                         // Activate the profile and make connection
                         sendFormated("AT+UPSDA=" PROFILE ",3\r\n");
                         if (RESP_OK == waitFinalResp(NULL,NULL,150*1000))