u-blox / C027_Support

support library for C027 helper functions for Buffer Pipes, Buffered Serial Port (rtos capable) and GPS parsing. It includes modem APIs for USSD, SMS and Sockets.

Dependents:   HTTPClient_Cellular_HelloWorld Cellular_HelloMQTT MbedSmartRestMain Car_Bon_car_module ... more

This library is intended to be used with u-blox products such as the C027 or a shield with u-blox cellular and GPS modules like the cellular and positioning shield from Embedded Artist.

For 2G/GSM and 3G/UMTS you need to:

  • have a SIM card and know its PIN number
  • need to know you network operators APN setting These setting should be passed to the connect or init and join functions. You can also extend the APN database in MDMAPN.h.

For CDMA products you need to make sure that you have provisioned and activated the modem with either Sprint or Verizon.

Diff: MDM.cpp

Revision:
128:0415646a9934
Parent:
127:c1c27d0f53c5
Child:
130:3189949981ec
--- a/MDM.cpp	Fri Aug 21 07:37:49 2015 +0000
+++ b/MDM.cpp	Fri Aug 21 09:11:54 2015 +0000
@@ -711,6 +711,63 @@
 // ----------------------------------------------------------------
 // internet connection 
 
+bool MDMParser::_activateProfile(const char* apn, const char* username, const char* password, Auth auth)
+{
+    // Set up the APN
+    if (*apn) {
+        sendFormated("AT+UPSD=" PROFILE ",1,\"%s\"\r\n", apn);
+        if (RESP_OK != waitFinalResp())
+            return false;
+    }
+    if (*username) {
+        sendFormated("AT+UPSD=" PROFILE ",2,\"%s\"\r\n", username);
+        if (RESP_OK != waitFinalResp())
+            return false;
+    }
+    if (*password) {
+        sendFormated("AT+UPSD=" PROFILE ",3,\"%s\"\r\n", password);
+        if (RESP_OK != waitFinalResp())
+            return false;
+    }
+    // Set up the dynamic IP address assignment.
+    sendFormated("AT+UPSD=" PROFILE ",7,\"0.0.0.0\"\r\n");
+    if (RESP_OK != waitFinalResp())
+        return false;
+    // try different Authentication Protocols
+    // 0 = none 
+    // 1 = PAP (Password Authentication Protocol)
+    // 2 = CHAP (Challenge Handshake Authentication Protocol)
+    for (int i = AUTH_NONE; i <= AUTH_CHAP; i ++) {
+        if ((auth == AUTH_DETECT) || (auth == i)) {
+            // Set up the Authentication Protocol
+            sendFormated("AT+UPSD=" PROFILE ",6,%d\r\n",i);
+            if (RESP_OK != waitFinalResp())
+                return false;
+            // Activate the profile and make connection
+            sendFormated("AT+UPSDA=" PROFILE ",3\r\n");
+            if (RESP_OK == waitFinalResp(NULL,NULL,150*1000))
+                return true;
+        }
+    }
+    return false;
+}
+
+bool MDMParser::_activateProfileByCid(int cid, const char* apn, const char* username, const char* password, Auth auth)
+{
+    sendFormated("AT+CGDCONT=%d,\"IP\",\"%s\"\r\n", cid, apn);
+    if (RESP_OK != waitFinalResp())
+        return false;
+    sendFormated("AT+UAUTHREQ=%d,%d,\"%s\",\"%s\"\r\n", cid, auth, username, password);
+    if (RESP_OK != waitFinalResp())
+        return false;
+    sendFormated("AT+UPSD=" PROFILE ",100,%d\r\n", cid);
+    if (RESP_OK != waitFinalResp())
+        return false;
+    // Activate the profile and make connection
+    sendFormated("AT+UPSDA=" PROFILE ",3\r\n");
+    return (RESP_OK == waitFinalResp(NULL,NULL,150*1000));
+}
+ 
 MDMParser::IP MDMParser::join(const char* apn /*= NULL*/, const char* username /*= NULL*/, 
                               const char* password /*= NULL*/, Auth auth /*= AUTH_DETECT*/)
 {
@@ -753,12 +810,6 @@
             const char* config = NULL;
             if (!apn && !username && !password)
                 config = apnconfig(_dev.imsi);
-/**** NOT SUPPORTED YET ****/ if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2)) {
-            // Set up the dynamic IP address assignment.
-            sendFormated("AT+UPSD=" PROFILE ",7,\"0.0.0.0\"\r\n");
-            if (RESP_OK != waitFinalResp())
-                goto failure;
-/**** NOT SUPPORTED YET ****/ }
             do {
                 if (config) {
                     apn      = _APN_GET(config);
@@ -771,40 +822,10 @@
                 password = password ? password : "";
                 auth = (*username && *password) ? auth : AUTH_NONE;
                 TRACE("Testing APN Settings(\"%s\",\"%s\",\"%s\",%d)\r\n", apn, username, password, auth);
-                // Set up the APN
-                if (*apn) {
-                    sendFormated("AT+UPSD=" PROFILE ",1,\"%s\"\r\n", apn);
-                    if (RESP_OK != waitFinalResp())
-                        goto failure;
-                }
-                if (*username) {
-                    sendFormated("AT+UPSD=" PROFILE ",2,\"%s\"\r\n", username);
-                    if (RESP_OK != waitFinalResp())
-                        goto failure;
-                }
-                if (*password) {
-                    sendFormated("AT+UPSD=" PROFILE ",3,\"%s\"\r\n", password);
-                    if (RESP_OK != waitFinalResp())
-                        goto failure;
-                }
-                // try different Authentication Protocols
-                // 0 = none 
-                // 1 = PAP (Password Authentication Protocol)
-                // 2 = CHAP (Challenge Handshake Authentication Protocol)
-                for (int i = AUTH_NONE; i <= AUTH_CHAP && !ok; i ++) {
-                    if ((auth == AUTH_DETECT) || (auth == i)) {
-/**** NOT SUPPORTED YET ****/ if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2)) {
-                        // Set up the Authentication Protocol
-                        sendFormated("AT+UPSD=" PROFILE ",6,%d\r\n",i);
-                        if (RESP_OK != waitFinalResp())
-                            goto failure;
-/**** NOT SUPPORTED YET ****/ }
-                        // Activate the profile and make connection
-                        sendFormated("AT+UPSDA=" PROFILE ",3\r\n");
-                        if (RESP_OK == waitFinalResp(NULL,NULL,150*1000))
-                            ok = true;
-                    }
-                }
+                if ((_dev.dev != DEV_TOBY_L2) && (_dev.dev != DEV_MPCI_L2))
+                    ok = _activateProfile(apn, username, password, auth);
+                else
+                    ok = _activateProfileByCid(1, apn, username, password, auth);
             } while (!ok && config && *config); // maybe use next setting ? 
             if (!ok) {
                 ERROR("Your modem APN/password/username may be wrong\r\n");