u-blox
This example establishes a transparent link between the mbed serial port and the modem (LISA or SARA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html
Dependencies: mbed
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
Changes
| Revision | Date | Who | Commit message |
|---|---|---|---|
| 8:b561b2003e76 | 2014-06-12 | mazgch | update libraries (use api provided by the platform) |
| 7:5d0d13c54e97 | 2013-12-19 | mazgch | enable hw flow control by default |
| 6:1e5c9b6b2e90 | 2013-12-19 | mazgch | use hw flow |
| 5:1141d3cfd1ef | 2013-12-19 | mazgch | use hw flow control on MDM serial port |
| 4:fafdcaf842ee | 2013-12-06 | mazgch | pulled in latest library |
| 3:b3237ab74d11 | 2013-11-06 | mazgch | use latest C027 library |
| 2:1970ac045983 | 2013-10-25 | mazgch | use power config |
| 1:7334dcb895d0 | 2013-10-23 | mazgch | fixed pinname |
| 0:53fc79c7af10 | 2013-10-22 | mazgch | Simple transparent serial port to the cellular modem, |