u-blox / Mbed 2 deprecated C027_ModemTransparentSerial

This example establishes a transparent link between the mbed serial port and the modem (LISA or SARA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html

Dependencies:   mbed

Install mbed Windows Drivers

Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration

Files at this revision

API Documentation at this revision

Revision 7:5d0d13c54e97, committed 2013-12-19

Comitter:
mazgch
Date:
Thu Dec 19 17:34:25 2013 +0000
Parent:
6:1e5c9b6b2e90
Child:
8:b561b2003e76
Commit message:
enable hw flow control by default

Changed in this revision

main.cpp Show annotated file Show diff for this revision Revisions of this file 
--- a/main.cpp	Thu Dec 19 17:32:08 2013 +0000
+++ b/main.cpp	Thu Dec 19 17:34:25 2013 +0000
@@ -10,7 +10,7 @@
     Serial mdm(MDMTXD, MDMRXD);
     mdm.baud(MDMBAUD);
     // use hardware flow control to make the connection more reliable
-    //mdm.set_flow_control(SerialBase::RTSCTS, MDMRTS, MDMCTS);
+    mdm.set_flow_control(SerialBase::RTSCTS, MDMRTS, MDMCTS);
     
     // open the PC serial port and (use the same baudrate)
     Serial pc(USBTX, USBRX);