u-blox / Mbed 2 deprecated C027_ModemTransparentSerial

This example establishes a transparent link between the mbed serial port and the modem (LISA or SARA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html

Dependencies:   mbed

Install mbed Windows Drivers

Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration

Files at this revision

API Documentation at this revision

Revision 8:b561b2003e76, committed 2014-06-12

Comitter:
mazgch
Date:
Thu Jun 12 07:28:57 2014 +0000
Parent:
7:5d0d13c54e97
Commit message:
update libraries (use api provided by the platform)

Changed in this revision

C027.lib Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
diff -r 5d0d13c54e97 -r b561b2003e76 C027.lib
--- a/C027.lib	Thu Dec 19 17:34:25 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/teams/ublox/code/C027/#e30f90b5447e

diff -r 5d0d13c54e97 -r b561b2003e76 main.cpp
--- a/main.cpp	Thu Dec 19 17:34:25 2013 +0000
+++ b/main.cpp	Thu Jun 12 07:28:57 2014 +0000
@@ -1,21 +1,36 @@
 #include "mbed.h"
-#include "C027.h"
+#ifdef TARGET_UBLOX_C027
+ #include "C027_api.h"
+#else
+ #error "This example is targeted for the C027 platform"
+#endif
 
+/* This example is establishing a transparent link between 
+   the mbed serial port and the serial communication interface 
+   of the Modem(MDM). 
+   
+   For a more advanced driver for the GPS or Modem(MDM) please 
+   look at the follwing library and example:
+   C027_Support Library 
+     http://mbed.org/teams/ublox/code/C027_Support/
+   C027_Support Example
+     http://mbed.org/teams/ublox/code/C027_SupportTest/
+*/
 int main() 
 {
-    C027 c027;
-    c027.mdmPower(true);
+    // setting the power on pin low while powering the device will turn it on
+    DigitalOut pin(MDMPWRON, 0);
+    wait_ms(10);
+    c027_mdm_powerOn(false);
     
     // open the mdm serial port
-    Serial mdm(MDMTXD, MDMRXD);
+    Serial mdm(MDMTXD,MDMRXD);
     mdm.baud(MDMBAUD);
-    // use hardware flow control to make the connection more reliable
-    mdm.set_flow_control(SerialBase::RTSCTS, MDMRTS, MDMCTS);
+    mdm.set_flow_control(SerialBase::RTSCTS, MDMRTS,MDMCTS);
     
     // open the PC serial port and (use the same baudrate)
     Serial pc(USBTX, USBRX);
     pc.baud(MDMBAUD);
-    
     while (1)
     {
         // transfer data from pc to modem

diff -r 5d0d13c54e97 -r b561b2003e76 mbed.bld
--- a/mbed.bld	Thu Dec 19 17:34:25 2013 +0000
+++ b/mbed.bld	Thu Jun 12 07:28:57 2014 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/dc225afb6914
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/024bf7f99721
\ No newline at end of file