This example establishes a transparent link between the mbed serial port and the gps I2C on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html

Dependencies:   mbed

Fork of C027_GPSTransparentSerial by u-blox

Install mbed Windows Drivers

Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration

Committer:
mazgch
Date:
Tue Oct 22 21:21:46 2013 +0000
Revision:
0:7f124c0a351a
Child:
6:5a8fd99e6a09
Simple transparent serial port to the gps receiver,

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mazgch 0:7f124c0a351a 1 http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f