raspiezo / mbed-dev

hal_tick.h changed for the L432KC target in TARGET/../device/ in order to reassign the system ticker from TIM2 to TIM7, since TIM2 was needed as a 32bit encoder counter.

Dependents:   Nucleo_L432KC_Quadrature_Decoder_with_ADC_and_DAC

Fork of mbed-dev by mbed official

targets/TARGET_NXP/TARGET_LPC15XX/PinNames.h@149:156823d33999, 2016-10-28 (annotated)

Committer:
<>
Date:
Fri Oct 28 11:17:30 2016 +0100
Revision:
149:156823d33999
Parent:
targets/hal/TARGET_NXP/TARGET_LPC15XX/PinNames.h@144:ef7eb2e8f9f7 
This updates the lib to the mbed lib v128



NOTE: This release includes a restructuring of the file and directory locations and thus some

include paths in your code may need updating accordingly.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2006-2014 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 */
<> 144:ef7eb2e8f9f7 16 #ifndef MBED_PINNAMES_H
<> 144:ef7eb2e8f9f7 17 #define MBED_PINNAMES_H
<> 144:ef7eb2e8f9f7 18
<> 144:ef7eb2e8f9f7 19 #include "cmsis.h"
<> 144:ef7eb2e8f9f7 20
<> 144:ef7eb2e8f9f7 21 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 22 extern "C" {
<> 144:ef7eb2e8f9f7 23 #endif
<> 144:ef7eb2e8f9f7 24
<> 144:ef7eb2e8f9f7 25 typedef enum {
<> 144:ef7eb2e8f9f7 26 PIN_INPUT,
<> 144:ef7eb2e8f9f7 27 PIN_OUTPUT
<> 144:ef7eb2e8f9f7 28 } PinDirection;
<> 144:ef7eb2e8f9f7 29
<> 144:ef7eb2e8f9f7 30 typedef enum {
<> 144:ef7eb2e8f9f7 31 // LPC Pin Names
<> 144:ef7eb2e8f9f7 32 P0_0 = 0,
<> 144:ef7eb2e8f9f7 33 P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
<> 144:ef7eb2e8f9f7 34 P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
<> 144:ef7eb2e8f9f7 35 P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12,
<> 144:ef7eb2e8f9f7 36
<> 144:ef7eb2e8f9f7 37 LED_RED = P0_25,
<> 144:ef7eb2e8f9f7 38 LED_GREEN = P0_3,
<> 144:ef7eb2e8f9f7 39 LED_BLUE = P1_1,
<> 144:ef7eb2e8f9f7 40
<> 144:ef7eb2e8f9f7 41 // mbed original LED naming
<> 144:ef7eb2e8f9f7 42 LED1 = LED_RED,
<> 144:ef7eb2e8f9f7 43 LED2 = LED_GREEN,
<> 144:ef7eb2e8f9f7 44 LED3 = LED_BLUE,
<> 144:ef7eb2e8f9f7 45 LED4 = LED_BLUE,
<> 144:ef7eb2e8f9f7 46
<> 144:ef7eb2e8f9f7 47 // Serial to USB pins
<> 144:ef7eb2e8f9f7 48 USBTX = P0_18,
<> 144:ef7eb2e8f9f7 49 USBRX = P0_13,
<> 144:ef7eb2e8f9f7 50
<> 144:ef7eb2e8f9f7 51 // Arduino Shield Receptacles Names
<> 144:ef7eb2e8f9f7 52 D0 = P0_13,
<> 144:ef7eb2e8f9f7 53 D1 = P0_18,
<> 144:ef7eb2e8f9f7 54 D2 = P0_29,
<> 144:ef7eb2e8f9f7 55 D3 = P0_9,
<> 144:ef7eb2e8f9f7 56 D4 = P0_10,
<> 144:ef7eb2e8f9f7 57 D5 = P0_16, // same port as D13
<> 144:ef7eb2e8f9f7 58 D6 = P1_3,
<> 144:ef7eb2e8f9f7 59 D7 = P0_0,
<> 144:ef7eb2e8f9f7 60 D8 = P0_24,
<> 144:ef7eb2e8f9f7 61 D9 = P1_0,
<> 144:ef7eb2e8f9f7 62 D10= P0_27,
<> 144:ef7eb2e8f9f7 63 D11= P0_28,
<> 144:ef7eb2e8f9f7 64 D12= P0_12,
<> 144:ef7eb2e8f9f7 65 D13= P0_16, // same port as D5
<> 144:ef7eb2e8f9f7 66 D14= P0_23,
<> 144:ef7eb2e8f9f7 67 D15= P0_22,
<> 144:ef7eb2e8f9f7 68
<> 144:ef7eb2e8f9f7 69 A0 = P0_8,
<> 144:ef7eb2e8f9f7 70 A1 = P0_7,
<> 144:ef7eb2e8f9f7 71 A2 = P0_6,
<> 144:ef7eb2e8f9f7 72 A3 = P0_5,
<> 144:ef7eb2e8f9f7 73 A4 = P0_23, // same port as SDA
<> 144:ef7eb2e8f9f7 74 A5 = P0_22, // same port as SCL
<> 144:ef7eb2e8f9f7 75 SDA= P0_23, // same port as A4
<> 144:ef7eb2e8f9f7 76 SCL= P0_22, // same port as A5
<> 144:ef7eb2e8f9f7 77
<> 144:ef7eb2e8f9f7 78 // Not connected
<> 144:ef7eb2e8f9f7 79 NC = (int)0xFFFFFFFF,
<> 144:ef7eb2e8f9f7 80 } PinName;
<> 144:ef7eb2e8f9f7 81
<> 144:ef7eb2e8f9f7 82 typedef enum {
<> 144:ef7eb2e8f9f7 83 PullUp = 2,
<> 144:ef7eb2e8f9f7 84 PullDown = 1,
<> 144:ef7eb2e8f9f7 85 PullNone = 0,
<> 144:ef7eb2e8f9f7 86 Repeater = 3,
<> 144:ef7eb2e8f9f7 87 OpenDrain = 4,
<> 144:ef7eb2e8f9f7 88 PullDefault = PullDown
<> 144:ef7eb2e8f9f7 89 } PinMode;
<> 144:ef7eb2e8f9f7 90
<> 144:ef7eb2e8f9f7 91 #define STDIO_UART_TX USBTX
<> 144:ef7eb2e8f9f7 92 #define STDIO_UART_RX USBRX
<> 144:ef7eb2e8f9f7 93
<> 144:ef7eb2e8f9f7 94 typedef struct {
<> 144:ef7eb2e8f9f7 95 unsigned char n;
<> 144:ef7eb2e8f9f7 96 unsigned char offset;
<> 144:ef7eb2e8f9f7 97 } SWM_Map;
<> 144:ef7eb2e8f9f7 98
<> 144:ef7eb2e8f9f7 99 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 100 }
<> 144:ef7eb2e8f9f7 101 #endif
<> 144:ef7eb2e8f9f7 102
<> 144:ef7eb2e8f9f7 103 #endif