Diff: targets/TARGET_NXP/TARGET_LPC15XX/PinNames.h

Revision:

149:156823d33999

Parent:

144:ef7eb2e8f9f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NXP/TARGET_LPC15XX/PinNames.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2014 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    // LPC Pin Names
+    P0_0 = 0,
+    P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+    P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+    P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12,
+    
+    LED_RED = P0_25,
+    LED_GREEN = P0_3,
+    LED_BLUE = P1_1,
+    
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = LED_BLUE,
+    
+    // Serial to USB pins
+    USBTX = P0_18,
+    USBRX = P0_13,
+    
+    // Arduino Shield Receptacles Names
+    D0 = P0_13,
+    D1 = P0_18,
+    D2 = P0_29,
+    D3 = P0_9,
+    D4 = P0_10,
+    D5 = P0_16, // same port as D13
+    D6 = P1_3,
+    D7 = P0_0,
+    D8 = P0_24,
+    D9 = P1_0,
+    D10= P0_27,
+    D11= P0_28,
+    D12= P0_12,
+    D13= P0_16, // same port as D5
+    D14= P0_23,
+    D15= P0_22,
+
+    A0 = P0_8,
+    A1 = P0_7,
+    A2 = P0_6,
+    A3 = P0_5,
+    A4 = P0_23, // same port as SDA
+    A5 = P0_22, // same port as SCL
+    SDA= P0_23, // same port as A4
+    SCL= P0_22, // same port as A5
+    
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+
+typedef struct {
+    unsigned char n;
+    unsigned char offset;
+} SWM_Map;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif