5.2.1 - Updated I2C files

Dependents:   mbed-TFT-example-NCS36510 mbed-Accelerometer-example-NCS36510 mbed-Accelerometer-example-NCS36510

Revision:
0:098463de4c5d
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/emac_api.h	Wed Jan 25 20:34:15 2017 +0000
@@ -0,0 +1,160 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_EMAC_API_H
+#define MBED_EMAC_API_H
+
+#if DEVICE_EMAC
+
+#include <stdbool.h>
+#include "emac_stack_mem.h"
+
+typedef struct emac_interface emac_interface_t;
+
+/**
+ * EmacInterface
+ *
+ * This interface should be used to abstract low level access to networking hardware
+ */
+
+/**
+ * Callback to be register with Emac interface and to be called fore received packets
+ *
+ * @param data Arbitrary user data (IP stack)
+ * @param buf  Received data
+ */
+typedef void (*emac_link_input_fn)(void *data, emac_stack_mem_chain_t *buf);
+
+/**
+ * Callback to be register with Emac interface and to be called for link status changes
+ *
+ * @param  data Arbitrary user data (IP stack)
+ * @param  up   Link status
+ */
+typedef void (*emac_link_state_change_fn)(void *data, bool up);
+
+/**
+ * Return maximum transmission unit
+ *
+ * @param emac Emac interface
+ * @return     MTU in bytes
+ */
+typedef uint32_t (*emac_get_mtu_size_fn)(emac_interface_t *emac);
+
+/**
+ * Return interface name
+ *
+ * @param emac Emac interface
+ * @param name Pointer to where the name should be written
+ * @param size Maximum number of character to copy
+ */
+typedef void (*emac_get_ifname_fn)(emac_interface_t *emac, char *name, uint8_t size);
+
+/**
+ * Returns size of the underlying interface HW address size
+ *
+ * @param emac Emac interface
+ * @return     HW address size in bytes
+ */
+typedef uint8_t (*emac_get_hwaddr_size_fn)(emac_interface_t *emac);
+
+/**
+ * Return interface hw address
+ *
+ * Copies HW address to provided memory, @param addr has to be of correct size see @a get_hwaddr_size
+ *
+ * @param emac Emac interface
+ * @param addr HW address for underlying interface
+ */
+typedef void (*emac_get_hwaddr_fn)(emac_interface_t *emac, uint8_t *addr);
+
+/**
+ * Set HW address for interface
+ *
+ * Provided address has to be of correct size, see @a get_hwaddr_size
+ *
+ * @param emac Emac interface
+ * @param addr Address to be set
+ */
+typedef void (*emac_set_hwaddr_fn)(emac_interface_t *emac, uint8_t *addr);
+
+/**
+ * Sends the packet over the link
+ *
+ * That can not be called from an interrupt context.
+ *
+ * @param emac Emac interface
+ * @param buf  Packet to be send
+ * @return     True if the packet was send successfully, False otherwise
+ */
+typedef bool (*emac_link_out_fn)(emac_interface_t *emac, emac_stack_mem_t *buf);
+
+/**
+ * Initializes the HW
+ *
+ * @return True on success, False in case of an error.
+ */
+typedef bool (*emac_power_up_fn)(emac_interface_t *emac);
+
+/**
+ * Deinitializes the HW
+ *
+ * @param emac Emac interface
+ */
+typedef void (*emac_power_down_fn)(emac_interface_t *emac);
+
+/**
+ * Sets a callback that needs to be called for packets received for that interface
+ *
+ * @param emac     Emac interface
+ * @param input_cb Function to be register as a callback
+ * @param data     Arbitrary user data to be passed to the callback
+ */
+typedef void (*emac_set_link_input_cb_fn)(emac_interface_t *emac, emac_link_input_fn input_cb, void *data);
+
+/**
+ * Sets a callback that needs to be called on link status changes for given interface
+ *
+ * @param emac     Emac interface
+ * @param state_cb Function to be register as a callback
+ * @param data Arbitrary user data to be passed to the callback
+ */
+typedef void (*emac_set_link_state_cb_fn)(emac_interface_t *emac, emac_link_state_change_fn state_cb, void *data);
+
+typedef struct emac_interface_ops {
+    emac_get_mtu_size_fn        get_mtu_size;
+    emac_get_ifname_fn          get_ifname;
+    emac_get_hwaddr_size_fn     get_hwaddr_size;
+    emac_get_hwaddr_fn          get_hwaddr;
+    emac_set_hwaddr_fn          set_hwaddr;
+    emac_link_out_fn            link_out;
+    emac_power_up_fn            power_up;
+    emac_power_down_fn          power_down;
+    emac_set_link_input_cb_fn   set_link_input_cb;
+    emac_set_link_state_cb_fn   set_link_state_cb;
+} emac_interface_ops_t;
+
+typedef struct emac_interface {
+    const emac_interface_ops_t ops;
+    void *hw;
+} emac_interface_t;
+
+#else
+
+typedef void *emac_interface_t;
+
+#endif /* DEVICE_EMAC */
+#endif  /* MBED_EMAC_API_H */