![](/media/cache/group/ON-Semiconductor.jpg.50x50_q85.jpg)
mbed example application for the Adafruit ST7735 TFT Shield, which implements SPI connections to the TFT shield and SD card, as well as an ADC to read from the analog in pins.
Dependencies: Adafruit_GFX Adafruit_ST7735 SDFileSystem mbed-os
Fork of mbed-TFT-example-NCS36510 by
Diff: README.md
- Revision:
- 0:8fbbced097c5
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/README.md Wed Jan 25 18:51:37 2017 +0000 @@ -0,0 +1,89 @@ +# Getting started with Blinky on mbed OS + +This is a very simple guide, reviewing the steps required to get Blinky working on an mbed OS platform. + +Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli). + +## Get the example application! + +From the command line, import the example: + +``` +mbed import mbed-os-example-blinky +cd mbed-os-example-blinky +``` + +### Now compile + +Invoke `mbed compile` specifying the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5: + +``` +mbed compile -m K64F -t ARM +``` + +Your PC may take a few minutes to compile your code. At the end you should get the following result: + +``` +[snip] ++----------------------------+-------+-------+------+ +| Module | .text | .data | .bss | ++----------------------------+-------+-------+------+ +| Misc | 13939 | 24 | 1372 | +| core/hal | 16993 | 96 | 296 | +| core/rtos | 7384 | 92 | 4204 | +| features/FEATURE_IPV4 | 80 | 0 | 176 | +| frameworks/greentea-client | 1830 | 60 | 44 | +| frameworks/utest | 2392 | 512 | 292 | +| Subtotals | 42618 | 784 | 6384 | ++----------------------------+-------+-------+------+ +Allocated Heap: unknown +Allocated Stack: unknown +Total Static RAM memory (data + bss): 7168 bytes +Total RAM memory (data + bss + heap + stack): 7168 bytes +Total Flash memory (text + data + misc): 43402 bytes +Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin +``` + +### Program your board + +1. Connect your mbed device to the computer over USB. +1. Copy the binary file to the mbed device . +1. Press the reset button to start the program. + +You should see the LED of your platform turning on and off. + +Congratulations if you managed to complete this test! + +## Export the project to Keil MDK and debug your application + +From the command line, run the following command: + +``` +mbed export -m K64F -i uvision +``` + +To debug the application: + +1. Start uVision. +1. Import the uVision project generated earlier. +1. Compile your application and generate an `.axf` file. +1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger). +1. Set breakpoints and start a debug session. + +![Image of uVision](img/uvision.png) + +## Troubleshooting + +1. Make sure `mbed-cli` is working correctly and its version is greater than `0.8.9` + + ``` + mbed --version + ``` + + If not, you can update it easily: + + ``` + pip install mbed-cli --upgrade + ``` + +2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32KB restriction on code size.