Diff: GSM.h

Revision:

10:24671d8aa0c9

Parent:

9:2f5445178940

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/GSM.h	Tue May 13 14:43:57 2014 +0000
@@ -0,0 +1,221 @@
+/*
+  GSM.h
+  2013 Copyright (c) Seeed Technology Inc.  All right reserved.
+
+  Author:lawliet.zou@gmail.com
+  2013-11-14
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef __GSM_H__
+#define __GSM_H__
+
+#include <stdio.h>
+#include "mbed.h"
+
+#define DEFAULT_TIMEOUT         5
+#define SMS_MAX_LENGTH          16
+
+
+enum GSM_MESSAGE {
+    MESSAGE_RING = 0,
+    MESSAGE_SMS  = 1,
+    MESSAGE_ERROR
+};
+
+
+/** GSM class.
+ *  Used for mobile communication. attention that GSM module communicate with MCU in serial protocol
+ */
+class GSM
+{
+public:
+    /** Create GSM instance
+     *  @param tx  uart transmit pin to communicate with GSM module
+     *  @param rx  uart receive pin to communicate with GSM module
+     *  @param baudRate baud rate of uart communication
+     *  @param number default phone number during mobile communication
+     */
+    GSM(PinName tx, PinName rx, int baudRate,char *number) : gprsSerial(tx, rx) {
+        //gprsSerial.baud(baudRate);
+        phoneNumber = number;
+    };
+    
+    int powerCheck(void);
+    /** init GSM module including SIM card check & signal strength & network check
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int init(void);
+
+    /** Check SIM card' Status
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int checkSIMStatus(void);
+
+    /** Check signal strength
+     *  @returns
+     *      signal strength in number(ex 3,4,5,6,7,8...) on success,
+     *      -1 on error
+     */
+    int checkSignalStrength(void);
+
+    /** Set SMS format and processing mode
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int settingSMS(void);
+
+    /** Send text SMS
+     *  @param  *number    phone number which SMS will be send to
+     *  @param  *data   message that will be send to
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int sendSMS(char *number, char *data);
+
+    /** Read SMS by index
+     *  @param  *message   buffer used to get SMS message
+     *  @param  index    which SMS message to read
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int readSMS(char *message, int index);
+
+    /** Delete SMS message on SIM card
+     *  @param  *index    the index number which SMS message will be delete
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int deleteSMS(int index);
+
+    /** Read SMS when coming a message,it will be store in messageBuffer.
+     *  @param message  buffer used to get SMS message
+     */
+    int getSMS(char* message);
+
+    /** Call someone
+     *  @param  *number    the phone number which you want to call
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int callUp(char *number);
+
+    /** Auto answer if coming a call
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int answer(void);
+
+    /** A loop to wait for some event. if a call comes in, it will auto answer it and if a SMS message comes in, it will read the message
+     *  @param  *check    whether to check phone number when get event
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int loopHandle(void);
+
+    /** GSM network init
+     *  @param *apn Access  Point Name to connect network
+     *  @param *userName    general is empty
+     *  @param *passWord    general is empty
+     */
+
+    int networkInit(char* apn, char* userName = NULL, char* passWord = NULL);
+    /** Build TCP connect
+     *  @param  *ip    ip address which will connect to
+     *  @param  *port   TCP server' port number
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int connectTCP(char *ip, char *port);
+
+    /** Send data to TCP server
+     *  @param  *data    data that will be send to TCP server
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int sendTCPData(char *data);
+
+    /** Close TCP connection
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int closeTCP(void);
+
+    /** Close TCP service
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int shutTCP(void);
+
+    Serial gprsSerial;
+    //USBSerial pc;
+
+private:
+    /** Read from GSM module and save to buffer array
+     *  @param  *buffer buffer array to save what read from GSM module
+     *  @param  *count  the maximal bytes number read from GSM module
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int readBuffer(char *buffer,int count);
+
+    /** Send AT command to GSM module
+     *  @param  *cmd command array which will be send to GSM module
+     */
+    void sendCmd(char *cmd);
+
+    /** Check GSM module response before timeout
+     *  @param  *resp   correct response which GSM module will return
+     *  @param  *timeout    waiting seconds till timeout
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int waitForResp(char *resp, int timeout);
+
+    /** Send AT command to GSM module and wait for correct response
+     *  @param  *cmd    AT command which will be send to GSM module
+     *  @param  *resp   correct response which GSM module will return
+     *  @param  *timeout    waiting seconds till timeout
+     *  @returns
+     *      0 on success,
+     *      -1 on error
+     */
+    int sendCmdAndWaitForResp(char *cmd, char *resp, int timeout);
+
+    Timer timeCnt;
+    char *phoneNumber;
+    char messageBuffer[SMS_MAX_LENGTH];
+};
+
+#endif
+