Vekatech / VK_RZ_A1H_LCD_demo

Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

Homepage

Table of Contents

  1. VKLCD50RTA
  2. VKLCD70RT

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.

Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png

How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:

How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:

Other demos ?

More demos you can find on our FTP

All wikipages