Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

Revision:
0:6435b67ad23c
diff -r 000000000000 -r 6435b67ad23c hal/common/SPISlave.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/common/SPISlave.cpp	Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SPISlave.h"
+
+#if DEVICE_SPISLAVE
+
+namespace mbed {
+
+SPISlave::SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel) :
+    _spi(),
+    _bits(8),
+    _mode(0),
+    _hz(1000000)
+ {
+    spi_init(&_spi, mosi, miso, sclk, ssel);
+    spi_format(&_spi, _bits, _mode, 1);
+    spi_frequency(&_spi, _hz);
+}
+
+void SPISlave::format(int bits, int mode) {
+    _bits = bits;
+    _mode = mode;
+    spi_format(&_spi, _bits, _mode, 1);
+}
+
+void SPISlave::frequency(int hz) {
+    _hz = hz;
+    spi_frequency(&_spi, _hz);
+}
+
+int SPISlave::receive(void) {
+    return(spi_slave_receive(&_spi));
+}
+
+int SPISlave::read(void) {
+    return(spi_slave_read(&_spi));
+}
+
+void SPISlave::reply(int value) {
+    spi_slave_write(&_spi, value);
+}
+
+} // namespace mbed
+
+#endif
+