Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

Revision:
0:6435b67ad23c
diff -r 000000000000 -r 6435b67ad23c hal/common/FilePath.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/common/FilePath.cpp	Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FilePath.h"
+
+namespace mbed {
+
+FilePath::FilePath(const char* file_path) : file_name(NULL), fb(NULL) {
+    if ((file_path[0] != '/') || (file_path[1] == 0)) return;
+
+    const char* file_system = &file_path[1];
+    file_name = file_system;
+    int len = 0;
+    while (true) {
+        char c = *file_name;
+        if (c == '/') { // end of object name
+            file_name++; // point to one char after the '/'
+            break;
+        }
+        if (c == 0) { // end of object name, with no filename
+            break;
+        }
+        len++;
+        file_name++;
+    }
+
+    fb = FileBase::lookup(file_system, len);
+}
+
+const char* FilePath::fileName(void) {
+    return file_name;
+}
+
+bool FilePath::isFileSystem(void) {
+    if (NULL == fb)
+        return false;
+    return (fb->getPathType() == FileSystemPathType);
+}
+
+FileSystemLike* FilePath::fileSystem(void) {
+    if (isFileSystem()) {
+        return (FileSystemLike*)fb;
+    }
+    return NULL;
+}
+
+bool FilePath::isFile(void) {
+    if (NULL == fb)
+        return false;
+    return (fb->getPathType() == FilePathType);
+}
+
+FileLike* FilePath::file(void) {
+    if (isFile()) {
+        return (FileLike*)fb;
+    }
+    return NULL;
+}
+
+bool FilePath::exists(void) {
+    return fb != NULL;
+}
+
+} // namespace mbed
+