Vekatech
Lcd companion boards support (VKLCD50RTA & VKLCD70RT)
What is this ?
This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.
Supported companion Boards:
VKLCD50RTA
VKLCD70RT
How to Configure ?
You can choose which display is installed by altering the lcd_panel.h file
Leave the active one & comment out the others:
#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD50RTA //#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD70RT
You can alter the whole demo with your pictures if you like:
How to compile ?
- The Demo can be compiled in 3 modes:
- I. Execution from the internal 10-MB on-chip SRAM.
- II. Execution from the on-board serial FALSH in dual (32-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
- III. Execution from the on-board serial FALSH in single (16-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in single flash mode )
Quick presentation:
Other demos ?
More demos you can find on our FTP
Diff: USB/USBHostCam/USBHostCam.h
- Revision:
- 0:6435b67ad23c
diff -r 000000000000 -r 6435b67ad23c USB/USBHostCam/USBHostCam.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USB/USBHostCam/USBHostCam.h Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,135 @@
+// USBHostCam.h
+#include "USBHostConf.h"
+#include "USBHost.h"
+#include "USBIsochronous.h"
+#include "BaseUvc.h"
+#include "decodeMJPEG.h"
+#pragma once
+
+#define _640x480 1
+#define _160x120 2
+#define _176x144 3
+#define _320x176 4
+#define _320x240 5
+#define _352x288 6
+#define _432x240 7
+#define _544x288 8
+#define _640x360 9
+//
+#define _752x416 10
+#define _800x448 11
+#define _800x600 12
+//
+#define _864x480 13
+#define _960x544 14
+#define _960x720 15
+//
+#define _1024x576 16
+#define _1184x656 17
+#define _1280x720 18
+#define _1280x960 19
+
+/*
+#define _640x480 1
+#define _352x288 2
+#define _320x240 3
+#define _176x144 4
+#define _160x120 5
+#define _544x288 6
+#define _432x240 7
+#define _320x176 8
+#define _640x360 9
+
+#define _800x480 10
+
+#define _1024x768 11
+*/
+
+
+#define TEST_ASSERT(A) while(!(A)){fprintf(stderr,"\n\n%s@%d %s ASSERT!\n\n",__PRETTY_FUNCTION__,__LINE__,#A);exit(1);};
+
+struct CamInfo {
+ uint16_t vid;
+ uint16_t pid;
+ uint8_t size;
+ uint8_t option;
+//
+ const char* name;
+ uint8_t formatIndex;
+ uint8_t frameIndex;
+ uint32_t interval;
+ uint8_t en;
+ uint16_t mps;
+ uint8_t if_alt;
+ uint8_t frameCount; // ITD frame count 1-8
+ uint8_t queueLimit; // ITD queue limit 1-3
+};
+
+/**
+ * A class to communicate a Cam
+ */
+class USBHostCam : public IUSBEnumerator, public BaseUvc, public decodeMJPEG {
+public:
+ /**
+ * Constructor
+ *
+ */
+ USBHostCam(uint8_t size = _160x120, uint8_t option = 0, CamInfo* user_caminfo = NULL);
+
+ /**
+ * Check if a Cam device is connected
+ *
+ * @return true if a Cam device is connected
+ */
+ bool connected();
+
+ /**
+ * Check if a usb connector is plugged
+ *
+ * @return true if a connector is plugged
+ */
+ bool plugged();
+
+ /**
+ * Try to connect to a Cam device
+ *
+ * @return true if connection was successful
+ */
+ bool connect();
+
+ /**
+ * read jpeg image
+ *
+ * @param buf read buffer
+ * @param size buffer size
+ * @param timeout_ms timeout default 15sec
+ * @return jpeg size if read success else -1
+ */
+ int readJPEG(uint8_t* buf, int size, int timeout_ms = 15*1000);
+
+protected:
+ //From IUSBEnumerator
+ virtual void setVidPid(uint16_t vid, uint16_t pid);
+ virtual bool parseInterface(uint8_t intf_nb, uint8_t intf_class, uint8_t intf_subclass, uint8_t intf_protocol); //Must return true if the interface should be parsed
+ virtual bool useEndpoint(uint8_t intf_nb, ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir); //Must return true if the endpoint will be used
+
+private:
+ bool dev_connected;
+
+ int cam_intf;
+ bool device_found;
+ bool caminfo_found;
+ uint8_t _seq;
+ uint8_t* _buf;
+ int _pos;
+ int _size;
+ CamInfo* CamInfoList;
+ CamInfo* caminfo;
+ uint8_t _caminfo_size;
+ uint8_t _caminfo_option;
+
+ virtual void outputJPEG(uint8_t c, int status); // from decodeMJPEG
+ void callback_motion_jpeg(uint16_t frame, uint8_t* buf, int len);
+ void init();
+ void onDisconnect();
+};