Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

hal/common/TimerEvent.cpp

Committer:
tvendov
Date:
2017-02-16
Revision:
0:6435b67ad23c

File content as of revision 0:6435b67ad23c:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "TimerEvent.h"
#include "cmsis.h"

#include <stddef.h>
#include "ticker_api.h"
#include "us_ticker_api.h"

namespace mbed {

TimerEvent::TimerEvent() : event(), _ticker_data(get_us_ticker_data()) {
    ticker_set_handler(_ticker_data, (&TimerEvent::irq));
}

TimerEvent::TimerEvent(const ticker_data_t *data) : event(), _ticker_data(data) {
    ticker_set_handler(_ticker_data, (&TimerEvent::irq));
}

void TimerEvent::irq(uint32_t id) {
    TimerEvent *timer_event = (TimerEvent*)id;
    timer_event->handler();
}

TimerEvent::~TimerEvent() {
    remove();
}

// insert in to linked list
void TimerEvent::insert(timestamp_t timestamp) {
    ticker_insert_event(_ticker_data, &event, timestamp, (uint32_t)this);
}

void TimerEvent::remove() {
    ticker_remove_event(_ticker_data, &event);
}

} // namespace mbed