Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

hal/common/Ethernet.cpp

Committer:
tvendov
Date:
2017-02-16
Revision:
0:6435b67ad23c

File content as of revision 0:6435b67ad23c:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "Ethernet.h"

#if DEVICE_ETHERNET

#include "ethernet_api.h"

namespace mbed {

Ethernet::Ethernet() {
    ethernet_init();
}

Ethernet::~Ethernet() {
    ethernet_free();
}

int Ethernet::write(const char *data, int size) {
    return ethernet_write(data, size);
}

int Ethernet::send() {
    return ethernet_send();
}

int Ethernet::receive() {
    return ethernet_receive();
}

int Ethernet::read(char *data, int size) {
    return ethernet_read(data, size);
}

void Ethernet::address(char *mac) {
    return ethernet_address(mac);
}

int Ethernet::link() {
    return ethernet_link();
}

void Ethernet::set_link(Mode mode) {
    int speed = -1;
    int duplex = 0;

    switch(mode) {
        case AutoNegotiate : speed = -1; duplex = 0; break;
        case HalfDuplex10  : speed = 0;  duplex = 0; break;
        case FullDuplex10  : speed = 0;  duplex = 1; break;
        case HalfDuplex100 : speed = 1;  duplex = 0; break;
        case FullDuplex100 : speed = 1;  duplex = 1; break;
    }

    ethernet_set_link(speed, duplex);
}

} // namespace mbed

#endif