Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

Revision:
0:6435b67ad23c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/common/Timer.cpp	Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,84 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Timer.h"
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+Timer::Timer() : _running(), _start(), _time(), _ticker_data(get_us_ticker_data()) {
+    reset();
+}
+
+Timer::Timer(const ticker_data_t *data) : _running(), _start(), _time(), _ticker_data(data) {
+    reset();
+}
+
+void Timer::start() {
+    core_util_critical_section_enter();
+    if (!_running) {
+        _start = ticker_read(_ticker_data);
+        _running = 1;
+    }
+    core_util_critical_section_exit();
+}
+
+void Timer::stop() {
+    core_util_critical_section_enter();
+    _time += slicetime();
+    _running = 0;
+    core_util_critical_section_exit();
+}
+
+int Timer::read_us() {
+    core_util_critical_section_enter();
+    int time = _time + slicetime();
+    core_util_critical_section_exit();
+    return time;
+}
+
+float Timer::read() {
+    return (float)read_us() / 1000000.0f;
+}
+
+int Timer::read_ms() {
+    return read_us() / 1000;
+}
+
+int Timer::slicetime() {
+    core_util_critical_section_enter();
+    int ret = 0;
+    if (_running) {
+        ret = ticker_read(_ticker_data) - _start;
+    }
+    core_util_critical_section_exit();
+    return ret;
+}
+
+void Timer::reset() {
+    core_util_critical_section_enter();
+    _start = ticker_read(_ticker_data);
+    _time = 0;
+    core_util_critical_section_exit();
+}
+
+Timer::operator float() {
+    return read();
+}
+
+} // namespace mbed
+