Vekatech
Lcd companion boards support (VKLCD50RTA & VKLCD70RT)
What is this ?
This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.
Supported companion Boards:
VKLCD50RTA
VKLCD70RT
How to Configure ?
You can choose which display is installed by altering the lcd_panel.h file
Leave the active one & comment out the others:
#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD50RTA //#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD70RT
You can alter the whole demo with your pictures if you like:
How to compile ?
- The Demo can be compiled in 3 modes:
- I. Execution from the internal 10-MB on-chip SRAM.
- II. Execution from the on-board serial FALSH in dual (32-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
- III. Execution from the on-board serial FALSH in single (16-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in single flash mode )
Quick presentation:
Other demos ?
More demos you can find on our FTP
Diff: hal/common/FileBase.cpp
- Revision:
- 0:6435b67ad23c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/common/FileBase.cpp Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileBase.h"
+
+namespace mbed {
+
+FileBase *FileBase::_head = NULL;
+SingletonPtr<PlatformMutex> FileBase::_mutex;
+
+FileBase::FileBase(const char *name, PathType t) : _next(NULL),
+ _name(name),
+ _path_type(t) {
+ _mutex->lock();
+ if (name != NULL) {
+ // put this object at head of the list
+ _next = _head;
+ _head = this;
+ } else {
+ _next = NULL;
+ }
+ _mutex->unlock();
+}
+
+FileBase::~FileBase() {
+ _mutex->lock();
+ if (_name != NULL) {
+ // remove this object from the list
+ if (_head == this) { // first in the list, so just drop me
+ _head = _next;
+ } else { // find the object before me, then drop me
+ FileBase *p = _head;
+ while (p->_next != this) {
+ p = p->_next;
+ }
+ p->_next = _next;
+ }
+ }
+ _mutex->unlock();
+}
+
+FileBase *FileBase::lookup(const char *name, unsigned int len) {
+ _mutex->lock();
+ FileBase *p = _head;
+ while (p != NULL) {
+ /* Check that p->_name matches name and is the correct length */
+ if (p->_name != NULL && std::strncmp(p->_name, name, len) == 0 && std::strlen(p->_name) == len) {
+ _mutex->unlock();
+ return p;
+ }
+ p = p->_next;
+ }
+ _mutex->unlock();
+ return NULL;
+}
+
+FileBase *FileBase::get(int n) {
+ _mutex->lock();
+ FileBase *p = _head;
+ int m = 0;
+ while (p != NULL) {
+ if (m == n) {
+ _mutex->unlock();
+ return p;
+ }
+
+ m++;
+ p = p->_next;
+ }
+ _mutex->unlock();
+ return NULL;
+}
+
+const char* FileBase::getName(void) {
+ // Constant read so no lock needed
+ return _name;
+}
+
+PathType FileBase::getPathType(void) {
+ // Constant read so no lock needed
+ return _path_type;
+}
+
+} // namespace mbed
+
+