Vekatech / VK_RZ_A1H_LCD_demo

Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.

Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png

How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:

How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:

Other demos ?

More demos you can find on our FTP

Diff: hal/api/mbed.h

Revision:
0:6435b67ad23c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/api/mbed.h	Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,84 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_H
+#define MBED_H
+
+#define MBED_LIBRARY_VERSION 123
+
+#if MBED_CONF_RTOS_PRESENT
+#include "rtos/rtos.h"
+#endif
+
+#if MBED_CONF_NSAPI_PRESENT
+#include "network-socket/nsapi.h"
+#endif
+
+#include "toolchain.h"
+#include "platform.h"
+
+// Useful C libraries
+#include <math.h>
+#include <time.h>
+
+// mbed Debug libraries
+#include "mbed_error.h"
+#include "mbed_interface.h"
+#include "mbed_assert.h"
+
+// mbed Peripheral components
+#include "DigitalIn.h"
+#include "DigitalOut.h"
+#include "DigitalInOut.h"
+#include "BusIn.h"
+#include "BusOut.h"
+#include "BusInOut.h"
+#include "PortIn.h"
+#include "PortInOut.h"
+#include "PortOut.h"
+#include "AnalogIn.h"
+#include "AnalogOut.h"
+#include "PwmOut.h"
+#include "Serial.h"
+#include "SPI.h"
+#include "SPISlave.h"
+#include "I2C.h"
+#include "I2CSlave.h"
+#include "Ethernet.h"
+#include "CAN.h"
+#include "RawSerial.h"
+
+// mbed Internal components
+#include "Timer.h"
+#include "Ticker.h"
+#include "Timeout.h"
+#include "LowPowerTimeout.h"
+#include "LowPowerTicker.h"
+#include "LowPowerTimer.h"
+#include "LocalFileSystem.h"
+#include "InterruptIn.h"
+#include "wait_api.h"
+#include "sleep_api.h"
+#include "rtc_time.h"
+
+// mbed Non-hardware components
+#include "Callback.h"
+#include "FunctionPointer.h"
+
+using namespace mbed;
+using namespace std;
+
+#endif
+