Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.


Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png


How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:


How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:


Other demos ?

More demos you can find on our FTP

Revision:
0:6435b67ad23c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/api/Stream.h	Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STREAM_H
+#define MBED_STREAM_H
+
+#include "platform.h"
+#include "FileLike.h"
+#include <cstdarg>
+
+namespace mbed {
+
+extern void mbed_set_unbuffered_stream(FILE *_file);
+extern int mbed_getc(FILE *_file);
+extern char* mbed_gets(char *s, int size, FILE *_file);
+
+/** File stream
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class Stream : public FileLike {
+
+public:
+    Stream(const char *name=NULL);
+    virtual ~Stream();
+
+    int putc(int c);
+    int puts(const char *s);
+    int getc();
+    char *gets(char *s, int size);
+    int printf(const char* format, ...);
+    int scanf(const char* format, ...);
+    int vprintf(const char* format, std::va_list args);
+    int vscanf(const char* format, std::va_list args);
+
+    operator std::FILE*() {return _file;}
+
+protected:
+    virtual int close();
+    virtual ssize_t write(const void* buffer, size_t length);
+    virtual ssize_t read(void* buffer, size_t length);
+    virtual off_t lseek(off_t offset, int whence);
+    virtual int isatty();
+    virtual int fsync();
+    virtual off_t flen();
+
+    virtual int _putc(int c) = 0;
+    virtual int _getc() = 0;
+
+    std::FILE *_file;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    Stream(const Stream&);
+    Stream & operator = (const Stream&);
+};
+
+} // namespace mbed
+
+#endif
+