Vekatech / VK_RZ_A1H_LCD_demo

Lcd companion boards support (VKLCD50RTA & VKLCD70RT)

What is this ?

This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.

Supported companion Boards:

VKLCD50RTA

/media/uploads/tvendov/front_view_hmi_50.png /media/uploads/tvendov/side_view_hmi_50.png

VKLCD70RT

/media/uploads/tvendov/front_view_hmi_70.png/media/uploads/tvendov/side_view_hmi_70.png /media/uploads/tvendov/front_view_lvds.png/media/uploads/tvendov/back_view_lvds.png

How to Configure ?

You can choose which display is installed by altering the lcd_panel.h file

Leave the active one & comment out the others:

#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD50RTA
//#define     LCD_VDC5_CH0_PANEL                  LCD_CH0_PANEL_VKLCD70RT

You can alter the whole demo with your pictures if you like:

How to compile ?

  • The Demo can be compiled in 3 modes:
    • I. Execution from the internal 10-MB on-chip SRAM.
      • After import in the online compiler just leave only the VKRZA1H_RAM.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Save the result binary in the SD Card (<SD>:\vkrza1\lcd_sample ), altering vkrza1h.ini by this way
    • II. Execution from the on-board serial FALSH in dual (32-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
    • III. Execution from the on-board serial FALSH in single (16-MB) mode.
      • After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
      • Drag & drop the result binary in MBED disk, (previously inited in single flash mode )

Quick presentation:

Other demos ?

More demos you can find on our FTP

hal/hal/buffer.h@0:6435b67ad23c, 2017-02-16 (annotated)

Committer:
tvendov
Date:
Thu Feb 16 10:23:48 2017 +0000
Revision:
0:6435b67ad23c
Initial lcd support (VKLCD50RTA & VKLCD70RT companion boards)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
tvendov 0:6435b67ad23c 1 /* mbed Microcontroller Library
tvendov 0:6435b67ad23c 2 * Copyright (c) 2014-2015 ARM Limited
tvendov 0:6435b67ad23c 3 *
tvendov 0:6435b67ad23c 4 * Licensed under the Apache License, Version 2.0 (the "License");
tvendov 0:6435b67ad23c 5 * you may not use this file except in compliance with the License.
tvendov 0:6435b67ad23c 6 * You may obtain a copy of the License at
tvendov 0:6435b67ad23c 7 *
tvendov 0:6435b67ad23c 8 * http://www.apache.org/licenses/LICENSE-2.0
tvendov 0:6435b67ad23c 9 *
tvendov 0:6435b67ad23c 10 * Unless required by applicable law or agreed to in writing, software
tvendov 0:6435b67ad23c 11 * distributed under the License is distributed on an "AS IS" BASIS,
tvendov 0:6435b67ad23c 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
tvendov 0:6435b67ad23c 13 * See the License for the specific language governing permissions and
tvendov 0:6435b67ad23c 14 * limitations under the License.
tvendov 0:6435b67ad23c 15 */
tvendov 0:6435b67ad23c 16 #ifndef MBED_BUFFER_H
tvendov 0:6435b67ad23c 17 #define MBED_BUFFER_H
tvendov 0:6435b67ad23c 18
tvendov 0:6435b67ad23c 19 #include <stddef.h>
tvendov 0:6435b67ad23c 20
tvendov 0:6435b67ad23c 21 /** Generic buffer structure
tvendov 0:6435b67ad23c 22 */
tvendov 0:6435b67ad23c 23 typedef struct buffer_s {
tvendov 0:6435b67ad23c 24 void *buffer; /**< the pointer to a buffer */
tvendov 0:6435b67ad23c 25 size_t length; /**< the buffer length */
tvendov 0:6435b67ad23c 26 size_t pos; /**< actual buffer position */
tvendov 0:6435b67ad23c 27 uint8_t width; /**< The buffer unit width (8, 16, 32, 64), used for proper *buffer casting */
tvendov 0:6435b67ad23c 28 } buffer_t;
tvendov 0:6435b67ad23c 29
tvendov 0:6435b67ad23c 30 #endif
tvendov 0:6435b67ad23c 31