Application for nRF51822 mbed KIT that controls the intensity of LED2 using the BLE UART Service. Works with the Android App BLE_mbed_Remote available here https://github.com/bennthomsen/BLE_mbed_Remote
Dependencies: BLE_API mbed nRF51822
Fork of BLE_UART_LEDControl_Echo by
This program demonstrates the use of the BLE UART Service to receive and send commands in order to remotely control the operation. In this example the intensity of LED2 can be remotely controlled.
The program accepts commands of the form "led2 0.1" over the BLE UART Service and uses these to set the duty cycle of the PWM Output that is connected to LED2 on the nRF51822 mbed KIT.
An Example Android App is available here https://github.com/bennthomsen/BLE_mbed_Remote. The complete source code and Android Studio Project files are available and can simply be pulled into Android Studio. The App implements sending of text, LED on off Button and a slider to control the LED brightness. At this stage setting the switch to off sets the PWM duty cycle to 0.0, however due to the PWMOut implementation in mbed the LED is not completely off at this point.
main.cpp
- Committer:
- rgrover1
- Date:
- 2014-09-02
- Revision:
- 5:4bc41267a03a
- Parent:
- 2:e060367b9024
- Child:
- 6:e0fc9072e853
File content as of revision 5:4bc41267a03a:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed.h" #include "BLEDevice.h" #define BLE_UUID_NUS_SERVICE 0x0001 /**< The UUID of the Nordic UART Service. */ #define BLE_UUID_NUS_TX_CHARACTERISTIC 0x0002 /**< The UUID of the TX Characteristic. */ #define BLE_UUID_NUS_RX_CHARACTERISTIC 0x0003 /**< The UUID of the RX Characteristic. */ #define NEED_CONSOLE_OUTPUT 1 /* Set this if you need debug messages on the console; * it will have an impact on code-size and power consumption. */ #if NEED_CONSOLE_OUTPUT Serial pc(USBTX, USBRX); #define DEBUG(...) { pc.printf(__VA_ARGS__); } #else #define DEBUG(...) /* nothing */ #endif /* #if NEED_CONSOLE_OUTPUT */ BLEDevice ble; DigitalOut led1(LED1); // The Nordic UART Service static const uint8_t uart_base_uuid[] = {0x6e, 0x40, 0x00, 0x01, 0xb5, 0xa3, 0xf3, 0x93, 0xe0, 0xa9, 0xe5,0x0e, 0x24, 0xdc, 0xca, 0x9e}; static const uint8_t uart_tx_uuid[] = {0x6e, 0x40, 0x00, 0x02, 0xb5, 0xa3, 0xf3, 0x93, 0xe0, 0xa9, 0xe5,0x0e, 0x24, 0xdc, 0xca, 0x9e}; static const uint8_t uart_rx_uuid[] = {0x6e, 0x40, 0x00, 0x03, 0xb5, 0xa3, 0xf3, 0x93, 0xe0, 0xa9, 0xe5,0x0e, 0x24, 0xdc, 0xca, 0x9e}; static const uint8_t uart_base_uuid_rev[] = {0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3, 0xa3, 0xb5, 0x01, 0x00, 0x40, 0x6e}; static const uint8_t SIZEOF_TX_RX_BUFFER = 128; uint8_t rxPayload[SIZEOF_TX_RX_BUFFER] = {0,}; uint8_t txPayload[SIZEOF_TX_RX_BUFFER] = {0,}; GattCharacteristic rxCharacteristic (uart_tx_uuid, rxPayload, 1, SIZEOF_TX_RX_BUFFER, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE); GattCharacteristic txCharacteristic (uart_rx_uuid, txPayload, 1, SIZEOF_TX_RX_BUFFER, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY); GattCharacteristic *uartChars[] = {&rxCharacteristic, &txCharacteristic}; GattService uartService(uart_base_uuid, uartChars, sizeof(uartChars) / sizeof(GattCharacteristic *)); void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason) { DEBUG("Disconnected!\n\r"); DEBUG("Restarting the advertising process\n\r"); ble.startAdvertising(); } void onDataWritten(uint16_t charHandle, const GattCharacteristicWriteCBParams *params) { if (charHandle == rxCharacteristic.getValueAttribute().getHandle()) { uint16_t bytesRead = params->len; DEBUG("received %u bytes\n\r", bytesRead); if (bytesRead < sizeof(rxPayload)) { memcpy(rxPayload, params->data, bytesRead); rxPayload[bytesRead] = 0; } DEBUG("ECHO: %s\n\r", (char *)rxPayload); ble.updateCharacteristicValue(txCharacteristic.getValueAttribute().getHandle(), rxPayload, bytesRead); } } void periodicCallback(void) { led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */ } int main(void) { led1 = 1; Ticker ticker; ticker.attach(periodicCallback, 1); DEBUG("Initialising the nRF51822\n\r"); ble.init(); ble.onDisconnection(disconnectionCallback); ble.onDataWritten(onDataWritten); /* setup advertising */ ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED); ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED); ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME, (const uint8_t *)"BLE UART", sizeof("BLE UART") - 1); ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS, (const uint8_t *)uart_base_uuid_rev, sizeof(uart_base_uuid)); ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */ ble.startAdvertising(); ble.addService(uartService); while (true) { ble.waitForEvent(); } }