Diff: main.cpp

Revision:

3:0d58dbc24178

Parent:

1:71c319f03fda

Child:

4:5002036c82df

diff -r 4e59a37182df -r 0d58dbc24178 main.cpp
--- a/main.cpp	Tue Aug 05 01:37:23 2014 +0000
+++ b/main.cpp	Wed Jan 24 08:44:45 2018 +0000
@@ -30,7 +30,7 @@
 //F401_init84 myinit(0);
 #include "mbed.h"
 #include "MPU9250.h"
-#include "N5110.h"
+//#include "N5110.h"
 
 // Using NOKIA 5110 monochrome 84 x 48 pixel display
 // pin 9 - Serial clock out (SCLK)
@@ -51,7 +51,7 @@
    Serial pc(USBTX, USBRX); // tx, rx
 
    //        VCC,   SCE,  RST,  D/C,  MOSI,S CLK, LED
-   N5110 lcd(PA_8, PB_10, PA_9, PA_6, PA_7, PA_5, PC_7);
+//   N5110 lcd(PA_8, PB_10, PA_9, PA_6, PA_7, PA_5, PC_7);
    
 
         
@@ -66,7 +66,7 @@
   
   t.start();        
   
-  lcd.init();
+//  lcd.init();
 //  lcd.setBrightness(0.05);
   
     
@@ -78,11 +78,11 @@
   {  
     pc.printf("MPU9250 WHO_AM_I is 0x%x\n\r", whoami);
     pc.printf("MPU9250 is online...\n\r");
-    lcd.clear();
-    lcd.printString("MPU9250 is", 0, 0);
+//    lcd.clear();
+//    lcd.printString("MPU9250 is", 0, 0);
     sprintf(buffer, "0x%x", whoami);
-    lcd.printString(buffer, 0, 1);
-    lcd.printString("shoud be 0x71", 0, 2);  
+//    lcd.printString(buffer, 0, 1);
+//    lcd.printString("shoud be 0x71", 0, 2);  
     wait(1);
     
     mpu9250.resetMPU9250(); // Reset registers to default in preparation for device calibration
@@ -118,11 +118,11 @@
     pc.printf("Could not connect to MPU9250: \n\r");
     pc.printf("%#x \n",  whoami);
  
-    lcd.clear();
-    lcd.printString("MPU9250", 0, 0);
-    lcd.printString("no connection", 0, 1);
+//    lcd.clear();
+//    lcd.printString("MPU9250", 0, 0);
+//    lcd.printString("no connection", 0, 1);
     sprintf(buffer, "WHO_AM_I 0x%x", whoami);
-    lcd.printString(buffer, 0, 2); 
+//    lcd.printString(buffer, 0, 2); 
  
     while(1) ; // Loop forever if communication doesn't happen
     }