LEX_Threaded_Programming
Dependencies: Heater_V2 MODSERIAL Nanopb FastPWM ADS8568_ADC
memspcr.pb.c
- Committer:
- justinbuckland
- Date:
- 2020-03-30
- Revision:
- 36:fef05d541679
- Parent:
- 22:f65353f6e935
File content as of revision 36:fef05d541679:
/* Automatically generated nanopb constant definitions */ /* Generated by nanopb-0.3.9.3 at Tue Sep 24 09:50:11 2019. */ #include "memspcr.pb.h" /* @@protoc_insertion_point(includes) */ #if PB_PROTO_HEADER_VERSION != 30 #error Regenerate this file with the current version of nanopb generator. #endif const pb_field_t memspcr_FluidicConfiguration_fields[4] = { PB_FIELD( 1, FLOAT , SINGULAR, STATIC , FIRST, memspcr_FluidicConfiguration, pressure_sensor_setpoint_adc, pressure_sensor_setpoint_adc, 0), PB_FIELD( 2, FLOAT , SINGULAR, STATIC , OTHER, memspcr_FluidicConfiguration, pressure_sensor_hysteresis_adc, pressure_sensor_setpoint_adc, 0), PB_FIELD( 3, INT32 , SINGULAR, STATIC , OTHER, memspcr_FluidicConfiguration, pressure_control_loop_interval_ms, pressure_sensor_hysteresis_adc, 0), PB_LAST_FIELD }; const pb_field_t memspcr_ThermalConfiguration_fields[9] = { PB_FIELD( 1, FLOAT , SINGULAR, STATIC , FIRST, memspcr_ThermalConfiguration, guard_drive_ratio, guard_drive_ratio, 0), PB_FIELD( 2, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, settling_time_us, guard_drive_ratio, 0), PB_FIELD( 3, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_kp_mho, settling_time_us, 0), PB_FIELD( 4, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_integral_time_ms, pid_kp_mho, 0), PB_FIELD( 5, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, thermal_control_loop_interval_ms, pid_integral_time_ms, 0), PB_FIELD( 6, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_wind_up_limit_ohm, thermal_control_loop_interval_ms, 0), PB_FIELD( 7, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_pwm_limit, pid_wind_up_limit_ohm, 0), PB_FIELD( 8, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, heater_pwm_period_ticks, pid_pwm_limit, 0), PB_LAST_FIELD }; const pb_field_t memspcr_OpticsConfiguration_fields[2] = { PB_FIELD( 1, INT32 , SINGULAR, STATIC , FIRST, memspcr_OpticsConfiguration, camera_interframe_delay_us, camera_interframe_delay_us, 0), PB_LAST_FIELD }; const pb_field_t memspcr_ThermalStep_fields[5] = { PB_FIELD( 1, INT32 , SINGULAR, STATIC , FIRST, memspcr_ThermalStep, elapsed_time_ms, elapsed_time_ms, 0), PB_FIELD( 2, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalStep, camera_offset_ms, elapsed_time_ms, 0), PB_FIELD( 3, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalStep, camera_exposure_ms, camera_offset_ms, 0), PB_FIELD( 4, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalStep, resistance_set_point, camera_exposure_ms, 0), PB_LAST_FIELD }; const pb_field_t memspcr_ExperimentConfiguration_fields[7] = { PB_FIELD( 1, INT32 , SINGULAR, STATIC , FIRST, memspcr_ExperimentConfiguration, logging_interval_ms, logging_interval_ms, 0), PB_FIELD( 2, UENUM , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, selected_heater, logging_interval_ms, 0), PB_FIELD( 3, MESSAGE , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, thermal, selected_heater, &memspcr_ThermalConfiguration_fields), PB_FIELD( 4, MESSAGE , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, fluidics, thermal, &memspcr_FluidicConfiguration_fields), PB_FIELD( 5, MESSAGE , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, optics, fluidics, &memspcr_OpticsConfiguration_fields), PB_FIELD( 6, MESSAGE , REPEATED, CALLBACK, OTHER, memspcr_ExperimentConfiguration, profile, optics, &memspcr_ThermalStep_fields), PB_LAST_FIELD }; /* Check that field information fits in pb_field_t */ #if !defined(PB_FIELD_32BIT) /* If you get an error here, it means that you need to define PB_FIELD_32BIT * compile-time option. You can do that in pb.h or on compiler command line. * * The reason you need to do this is that some of your messages contain tag * numbers or field sizes that are larger than what can fit in 8 or 16 bit * field descriptors. */ PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 65536), YOU_MUST_DEFINE_PB_FIELD_32BIT_FOR_MESSAGES_memspcr_FluidicConfiguration_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_ThermalStep_memspcr_ExperimentConfiguration) #endif #if !defined(PB_FIELD_16BIT) && !defined(PB_FIELD_32BIT) /* If you get an error here, it means that you need to define PB_FIELD_16BIT * compile-time option. You can do that in pb.h or on compiler command line. * * The reason you need to do this is that some of your messages contain tag * numbers or field sizes that are larger than what can fit in the default * 8 bit descriptors. */ PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 256 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 256 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 256), YOU_MUST_DEFINE_PB_FIELD_16BIT_FOR_MESSAGES_memspcr_FluidicConfiguration_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_ThermalStep_memspcr_ExperimentConfiguration) #endif /* @@protoc_insertion_point(eof) */