File content as of revision 22:f65353f6e935:

/* Automatically generated nanopb constant definitions */
/* Generated by nanopb-0.3.9.3 at Tue Sep 24 09:50:11 2019. */

#include "memspcr.pb.h"

/* @@protoc_insertion_point(includes) */
#if PB_PROTO_HEADER_VERSION != 30
#error Regenerate this file with the current version of nanopb generator.
#endif



const pb_field_t memspcr_FluidicConfiguration_fields[4] = {
    PB_FIELD(  1, FLOAT   , SINGULAR, STATIC  , FIRST, memspcr_FluidicConfiguration, pressure_sensor_setpoint_adc, pressure_sensor_setpoint_adc, 0),
    PB_FIELD(  2, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_FluidicConfiguration, pressure_sensor_hysteresis_adc, pressure_sensor_setpoint_adc, 0),
    PB_FIELD(  3, INT32   , SINGULAR, STATIC  , OTHER, memspcr_FluidicConfiguration, pressure_control_loop_interval_ms, pressure_sensor_hysteresis_adc, 0),
    PB_LAST_FIELD
};

const pb_field_t memspcr_ThermalConfiguration_fields[9] = {
    PB_FIELD(  1, FLOAT   , SINGULAR, STATIC  , FIRST, memspcr_ThermalConfiguration, guard_drive_ratio, guard_drive_ratio, 0),
    PB_FIELD(  2, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, settling_time_us, guard_drive_ratio, 0),
    PB_FIELD(  3, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_kp_mho, settling_time_us, 0),
    PB_FIELD(  4, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_integral_time_ms, pid_kp_mho, 0),
    PB_FIELD(  5, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, thermal_control_loop_interval_ms, pid_integral_time_ms, 0),
    PB_FIELD(  6, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_wind_up_limit_ohm, thermal_control_loop_interval_ms, 0),
    PB_FIELD(  7, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_pwm_limit, pid_wind_up_limit_ohm, 0),
    PB_FIELD(  8, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, heater_pwm_period_ticks, pid_pwm_limit, 0),
    PB_LAST_FIELD
};

const pb_field_t memspcr_OpticsConfiguration_fields[2] = {
    PB_FIELD(  1, INT32   , SINGULAR, STATIC  , FIRST, memspcr_OpticsConfiguration, camera_interframe_delay_us, camera_interframe_delay_us, 0),
    PB_LAST_FIELD
};

const pb_field_t memspcr_ThermalStep_fields[5] = {
    PB_FIELD(  1, INT32   , SINGULAR, STATIC  , FIRST, memspcr_ThermalStep, elapsed_time_ms, elapsed_time_ms, 0),
    PB_FIELD(  2, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalStep, camera_offset_ms, elapsed_time_ms, 0),
    PB_FIELD(  3, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalStep, camera_exposure_ms, camera_offset_ms, 0),
    PB_FIELD(  4, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalStep, resistance_set_point, camera_exposure_ms, 0),
    PB_LAST_FIELD
};

const pb_field_t memspcr_ExperimentConfiguration_fields[7] = {
    PB_FIELD(  1, INT32   , SINGULAR, STATIC  , FIRST, memspcr_ExperimentConfiguration, logging_interval_ms, logging_interval_ms, 0),
    PB_FIELD(  2, UENUM   , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, selected_heater, logging_interval_ms, 0),
    PB_FIELD(  3, MESSAGE , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, thermal, selected_heater, &memspcr_ThermalConfiguration_fields),
    PB_FIELD(  4, MESSAGE , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, fluidics, thermal, &memspcr_FluidicConfiguration_fields),
    PB_FIELD(  5, MESSAGE , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, optics, fluidics, &memspcr_OpticsConfiguration_fields),
    PB_FIELD(  6, MESSAGE , REPEATED, CALLBACK, OTHER, memspcr_ExperimentConfiguration, profile, optics, &memspcr_ThermalStep_fields),
    PB_LAST_FIELD
};



/* Check that field information fits in pb_field_t */
#if !defined(PB_FIELD_32BIT)
/* If you get an error here, it means that you need to define PB_FIELD_32BIT
 * compile-time option. You can do that in pb.h or on compiler command line.
 * 
 * The reason you need to do this is that some of your messages contain tag
 * numbers or field sizes that are larger than what can fit in 8 or 16 bit
 * field descriptors.
 */
PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 65536), YOU_MUST_DEFINE_PB_FIELD_32BIT_FOR_MESSAGES_memspcr_FluidicConfiguration_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_ThermalStep_memspcr_ExperimentConfiguration)
#endif

#if !defined(PB_FIELD_16BIT) && !defined(PB_FIELD_32BIT)
/* If you get an error here, it means that you need to define PB_FIELD_16BIT
 * compile-time option. You can do that in pb.h or on compiler command line.
 * 
 * The reason you need to do this is that some of your messages contain tag
 * numbers or field sizes that are larger than what can fit in the default
 * 8 bit descriptors.
 */
PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 256 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 256 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 256), YOU_MUST_DEFINE_PB_FIELD_16BIT_FOR_MESSAGES_memspcr_FluidicConfiguration_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_ThermalStep_memspcr_ExperimentConfiguration)
#endif


/* @@protoc_insertion_point(eof) */