Implement new controller
Dependencies: mbed-rtos mbed QEI BNO055 MPU6050_DMP_Nucleo-I2Cdev virgo3_imuHandler_Orion_PCB MAX17048 Servo
Fork of Orion_newPCB_test by
Configuration/config.h
- Committer:
- akashvibhute
- Date:
- 2016-06-07
- Revision:
- 19:7345688260b2
- Parent:
- 15:23d79bb4eaf2
- Child:
- 20:2720a283d1c5
File content as of revision 19:7345688260b2:
/* * * config.h Virgo v3 PCB AV22032015 * */ #ifndef VirgoConfig_H #define VirgoConfig_H //** General Functions **************************************************************************** #define PC_BAUDRATE 921600 //------------------------------------------------------------------------------------------------- //** Function exectution rates ******************************************************************** #define Hearbeat_RateHz 1 //hearbeat loop run rate in Hz #define Hearbeat_RateMS (1000/Hearbeat_RateHz) //hearbeat loop run rate in ms #define imu_UpdateRateHz 110 // imu update rate in Hz #define imu_UpdatePeriodMS (1000/imu_UpdateRateHz) // imu update rate in ms #define motorControl_UpdateRateHz 200 // motorControl update rate in Hz #define motorControl_UpdatePeriodMS (1000/motorControl_UpdateRateHz) // motorControl update rate in ms #define odometry_UpdateRateHz 125 //odometry update rate in Hz #define odometry_UpdatePeriodMS (1000/odometry_UpdateRateHz) //odometry update rate in ms #define PrintLoop_RateHz 10 //print loop run rate in Hz #define PrintLoop_PeriodMS (1000/PrintLoop_RateHz) //print loop run rate in ms #define PurePursuit_UpdateRateHz 20//Pure pursuit update run rate in Hz #define PurePursuit_UpdatePeriodMS (1000/PurePursuit_UpdateRateHz)//Pure pursuit update run rate in ms #define WaypointCmd_UpdateRateHz 10 //waypoint commander run rate in Hz #define WaypointCmd_UpdatePeriodMS (1000/WaypointCmd_UpdateRateHz) //waypoint commander run rate in ms #define CommLoop_UpdateRateHz 100 //Communications loop run rate in Hz #define CommLoop_UpdatePeriodMS (1000/CommLoop_UpdateRateHz) //Communications loop run rate in ms #define CommPump_UpdateRateHz 500 //nRF network communications pump run rate in Hz #define CommPump_UpdatePeriodMS (1000/CommPump_UpdateRateHz) //nRF network communications pump run rate in ms //#define nRfDefault_uploadRateMS 200 //default upload rate in ms for nRF wireless comm #define camera_cycleMinutes 15 //default camera switch on frequency in minutes #define camera_CaptureTimeS 30 //default camera capture time in seconds #define DataRecorder_RateHz 100 //data recorder loop run rate in Hz #define DataRecorder_PeriodMS (1000/DataRecorder_RateHz) //data recorder loop run rate in ms //------------------------------------------------------------------------------------------------- //** Drivetrain ******************************************************************************** //** Motor ** #define PWMfreq_khz 20 #define PIDFf_kP 0.50 #define PIDFf_kI 1.50 #define PIDFf_kD 0.20 #define PIDFf_kFf 2.50 #define PIDFf_lim_P 0.05 #define PIDFf_lim_I 0.30 #define PIDFf_lim_D 0.05 #define PIDFf_lim_Ff 0.60 #define PIDFf_range_min -1.0 #define PIDFf_range_max 1.0 #define pid_MWindowSize 10 //#define motor_LimitRPM_min -100.0 //#define motor_LimitRPM_max 300.0 //#define motor_Acc_limit 200.0 //------------- //** Encoder ** #define encoder_resolution 104 #define encoder_MWindowSize 12 //------------- //------------------------------------------------------------------------------------------------- //** Localization ********************************************************************************* //** IMU ** #define Pose_MWindowSize 10 #define GyroAcc_MWindowSize 10 //* MPU9150 * #define MPU6050_StabilizationReadings 10 //number of non deviating data points to determine if imu has stabilized #define IMU_FIFO_RATE_DIVIDER 0x01 // FIFO rate = 200Hz / (1 + this value), range 0x00 to 0x09. Here, 0x01 implies 100Hz. #define IMU_SAMPLE_RATE_DIVIDER 1 // Sample rate = 1kHz / (1 + this value), Here, 1 implies 500Hz. #define MPU6050_GYRO_FS MPU6050_GYRO_FS_2000 // measuring range of gyroscope (±n deg/s) #define MPU6050_ACCEL_FS MPU6050_ACCEL_FS_2 // measuring range of acceleration sensor (±n g) //* ** * //* BNO055 * #define BNO055_StabilizationReadings 200 //number of non deviating data points to determine if imu has stabilized //* ** * //* Localization * #define wheel_dia 10*1.0 //wheel dia in mm * effective hypocyclic gear ratio #define track_width 25 //wheel dia in mm //------------------------------------------------------------------------------------------------- //** PurePursuit controller ************************************************************************* #define track_width 25 //track width in mm #define driveTrain_minV 250//175 //min velocity of individual drive in mm/s #define driveTrain_maxV 500//235 //max velocity of individual drive in mm/s //------------------------------------------------------------------------------------------------- //** Communications ******************************************************************************* #define virgo3_robot_address 01 //address of this robot node #define virgo3_network_channel 72 //communications channel number //------------------------------------------------------------------------------------------------- //** Attitude Controller ************************************************************************** #define wheelV_MWindowSize 25 //wheel velocity moving window filter size, customized for Pitch controller //** HansonController ** //** PID pitch controller ** // This PID controller adds/subtracts a percentage of command velocity based on the variations of // the pitch angle while controlling the pitch angle to a setpoint angle. #define AttPIDFf_kP 9.00 #define AttPIDFf_kI 1.00 #define AttPIDFf_kD 0.10 #define AttPIDFf_kFf 0.00 #define AttPIDFf_lim_P 0.6 #define AttPIDFf_lim_I 0.1 #define AttPIDFf_lim_D 0.3 #define AttPIDFf_lim_Ff 0.0 #define AttPIDFf_range_min -1.0 #define AttPIDFf_range_max 1.0 //------------------------------------------------------------------------------------------------- //** Data Recorder ******************************************************************************** #define max_coloumns 16 //#define max_rows 1200 #define max_rows 120 #define max_RAM 16*1024 //max permissible ram usage in kB //------------------------------------------------------------------------------------------------- #endif /* VirgoConfig_H */