Revision 1:acf9d29475a6, committed 2015-06-03

Comitter:

TheScouser

Date:

Wed Jun 03 13:36:47 2015 +0000

Parent:

0:bbaf949d2a27

Commit message:

IR thermometer;

Changed in this revision

diff -r bbaf949d2a27 -r acf9d29475a6 main.cpp
--- a/main.cpp	Tue Feb 21 01:47:13 2012 +0000
+++ b/main.cpp	Wed Jun 03 13:36:47 2015 +0000
@@ -1,26 +1,43 @@
 #include "mbed.h"
 #include "mlx90614.h"
 
-DigitalOut myled(LED1); //displays I2C wait
-I2C i2c(p28,p27);   //sda,scl
+DigitalOut myled(LED1),p31(P0_29),p32(P0_30),laser_mod(p21); //displays I2C wait
+DigitalIn tog_temp(p19),tog_gyro(p20);
+I2C i2c(p9,p10);   //sda,scl
 Serial pc(USBTX,USBRX);  //serial usb config
-
+ 
 MLX90614 IR_thermometer(&i2c);
 //setup an MLX90614 using MLX90614 library from
 // http://mbed.org/users/aquahika/libraries/MLX90614/lsixz6
-
+ 
 float temp; //temperature in degrees C
-
+ 
 int main() {
+    p31 = 0;
+    p32 = 1;
     while (1) {
+        if(tog_temp){
+            p31 = 0;
+            p32 = 1;
+        }
+        else if(tog_gyro){
+            p31 = 1;
+            p32 = 0; 
+        }
+        
         myled=1; // if led1 on - waiting on I2C
-        if (IR_thermometer.getTemp(&temp)) {
-            //gets temperature from sensor via I2C bus
-            myled=0;
-            //print temperature on PC
-            printf("Temperature is %5.1F degrees C\r\n",temp);
+        if(p32 == 1){
+            
+            if (IR_thermometer.getTemp(&temp)) {
+                //gets temperature from sensor via I2C bus
+                myled=0;
+                //print temperature on PC
+                printf("Temperature is %5.1F degrees C\r\n",temp);
+            }
+        }else{
+             printf("Gyro");
         }
         //wait for device to produce next temperature reading
         wait(0.5);
     }
-}
+}
\ No newline at end of file