TVZ2019
Programski kod sata/brojača. Izveden pomoću 4 tipkala i LCD zaslonom rezolucije 16x2 točaka.
Dependencies: mbed Bljeskalica TextLCD
Prikaz trenutnog vremena i datuma na LCD zaslonu rezolucije 16x2 točaka. U gornjem redu prikazuje se datum u formatu: dan/mjesec/godina, a u donjem redu vrijeme u formatu: sat/minuta/sekunda. Podešenje vremena i datuma je pomoću tipkala i to u inkrementima po 1 (sekunda, minuta, sat, dan, mjesec, godina).
Revision 0:1c9b141ec08b, committed 2020-06-11
- Comitter:
- dariojankovic
- Date:
- Thu Jun 11 22:28:08 2020 +0000
- Commit message:
- Proba
Changed in this revision
diff -r 000000000000 -r 1c9b141ec08b Bljeskalica.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Bljeskalica.lib Thu Jun 11 22:28:08 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/dariojankovic/code/Bljeskalica/#93d73c414233
diff -r 000000000000 -r 1c9b141ec08b TextLCD.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Thu Jun 11 22:28:08 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/simon/code/TextLCD/#308d188a2d3a
diff -r 000000000000 -r 1c9b141ec08b main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Jun 11 22:28:08 2020 +0000
@@ -0,0 +1,24 @@
+#include "main.h"
+
+int main() {
+
+ DAN_SAT.mode(PullUp);
+ MJESEC_MINUTA.mode(PullUp);
+ GODINA_SEKUNDA.mode(PullUp);
+ DATUM.mode(PullUp);
+ VRIJEME.mode(PullUp);
+
+ debounce.start();
+ DAN_SAT.fall(&toggle_DAN_SAT);
+ MJESEC_MINUTA.fall(&toggle_MJESEC_MINUTA);
+ GODINA_SEKUNDA.fall(&toggle_GODINA_SEKUNDA);
+ DATUM.fall(&toggle_DATUM);
+
+ led.flash(5);
+
+ LCD.cls();
+
+ while(1) {
+ ZASLON();
+ wait(1); }
+ }
\ No newline at end of file
diff -r 000000000000 -r 1c9b141ec08b main.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.h Thu Jun 11 22:28:08 2020 +0000
@@ -0,0 +1,33 @@
+#include "mbed.h"
+#include "TextLCD.h"
+#include "Flasher.h"
+#include "tipkala.h"
+
+TextLCD LCD (p19, p20, p21, p22, p23, p24); //RS,E,D0,D1,D2,D3
+
+Flasher led(LED1);
+
+int MENU = 0;
+
+void ZASLON();
+
+void vrijeme() {
+ set_time(1577836800+offset); }
+
+void ZASLON() {
+ time_t seconds = time(NULL);
+
+ if (MENU==0) {
+ LCD.cls();
+ LCD.locate(2,0);
+ char day[16];
+
+ strftime(day, 16, "%d/%m/%y %a\n", localtime(&seconds));
+ LCD.printf("%s", day);
+
+ char time[16];
+ strftime(time, 16, "%H:%M:%S\n", localtime(&seconds));
+ LCD.locate(4,1);
+ LCD.printf("%s", time);}
+}
+
diff -r 000000000000 -r 1c9b141ec08b mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Jun 11 22:28:08 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400 \ No newline at end of file
diff -r 000000000000 -r 1c9b141ec08b tipkala.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tipkala.h Thu Jun 11 22:28:08 2020 +0000
@@ -0,0 +1,56 @@
+#include "mbed.h"
+
+InterruptIn DAN_SAT (p5);
+InterruptIn MJESEC_MINUTA (p6);
+InterruptIn GODINA_SEKUNDA(p7);
+InterruptIn DATUM(p8);
+InterruptIn VRIJEME(p9);
+
+Ticker STOPERICA;
+Timer debounce;
+
+uint32_t offset = 0;
+int UVIJET = 0;
+
+void vrijeme();
+
+
+void toggle_DAN_SAT(){
+ if(debounce.read_ms()>250) {
+ switch (UVIJET) {
+ case 1: offset+=86400;
+ break;
+ case 2: offset+=3600;
+ break; }
+ debounce.reset();
+ vrijeme(); }
+ }
+
+void toggle_MJESEC_MINUTA() {
+ if(debounce.read_ms()>250) {
+ switch (UVIJET) {
+ case 1: offset+=2678400;
+ break;
+ case 2: offset+=60;
+ break; }
+ debounce.reset();
+ vrijeme(); }
+ }
+
+void toggle_GODINA_SEKUNDA() {
+ if(debounce.read_ms()>250) {
+ switch (UVIJET) {
+ case 1: offset+=31622400;
+ break;
+ case 2: offset+=1;
+ break; }
+ debounce.reset();
+ vrijeme(); }
+ }
+
+ void toggle_DATUM() {
+ if(debounce.read_ms()>250) {
+ if (UVIJET<=1){
+ UVIJET+=1; }
+ else UVIJET=0;
+ debounce.reset(); }}
\ No newline at end of file