Output channel configuration
[TIM Exported Functions]

Configure an output channel.

CCMR1 CC1S LL_TIM_OC_ConfigOutput
CCMR1 CC2S LL_TIM_OC_ConfigOutput
CCMR2 CC3S LL_TIM_OC_ConfigOutput
CCMR2 CC4S LL_TIM_OC_ConfigOutput
CCMR3 CC5S LL_TIM_OC_ConfigOutput
CCMR3 CC6S LL_TIM_OC_ConfigOutput
CCER CC1P LL_TIM_OC_ConfigOutput
CCER CC2P LL_TIM_OC_ConfigOutput
CCER CC3P LL_TIM_OC_ConfigOutput
CCER CC4P LL_TIM_OC_ConfigOutput
CCER CC5P LL_TIM_OC_ConfigOutput
CCER CC6P LL_TIM_OC_ConfigOutput
CR2 OIS1 LL_TIM_OC_ConfigOutput
CR2 OIS2 LL_TIM_OC_ConfigOutput
CR2 OIS3 LL_TIM_OC_ConfigOutput
CR2 OIS4 LL_TIM_OC_ConfigOutput
CR2 OIS5 LL_TIM_OC_ConfigOutput
CR2 OIS6 LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
Configuration	This parameter must be a combination of all the following values: LL_TIM_OCPOLARITY_HIGH or LL_TIM_OCPOLARITY_LOW LL_TIM_OCIDLESTATE_LOW or LL_TIM_OCIDLESTATE_HIGH

Return values:

None

Definition at line 1930 of file stm32l4xx_ll_tim.h.

Disable clearing the output channel on an external event.

Note:

Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether or not a timer instance can clear the OCxREF signal on an external event. CCMR1 OC1CE LL_TIM_OC_DisableClear
CCMR1 OC2CE LL_TIM_OC_DisableClear
CCMR2 OC3CE LL_TIM_OC_DisableClear
CCMR2 OC4CE LL_TIM_OC_DisableClear
CCMR3 OC5CE LL_TIM_OC_DisableClear
CCMR3 OC6CE LL_TIM_OC_DisableClear

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2356 of file stm32l4xx_ll_tim.h.

Disable fast mode for the output channel.

CCMR1 OC1FE LL_TIM_OC_DisableFast
CCMR1 OC2FE LL_TIM_OC_DisableFast
CCMR2 OC3FE LL_TIM_OC_DisableFast
CCMR2 OC4FE LL_TIM_OC_DisableFast
CCMR3 OC5FE LL_TIM_OC_DisableFast
CCMR3 OC6FE LL_TIM_OC_DisableFast

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2198 of file stm32l4xx_ll_tim.h.

Disable compare register (TIMx_CCRx) preload for the output channel.

CCMR1 OC1PE LL_TIM_OC_DisablePreload
CCMR1 OC2PE LL_TIM_OC_DisablePreload
CCMR2 OC3PE LL_TIM_OC_DisablePreload
CCMR2 OC4PE LL_TIM_OC_DisablePreload
CCMR3 OC5PE LL_TIM_OC_DisablePreload
CCMR3 OC6PE LL_TIM_OC_DisablePreload

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2275 of file stm32l4xx_ll_tim.h.

Enable clearing the output channel on an external event.

Note:

This function can only be used in Output compare and PWM modes. It does not work in Forced mode.

Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether or not a timer instance can clear the OCxREF signal on an external event. CCMR1 OC1CE LL_TIM_OC_EnableClear
CCMR1 OC2CE LL_TIM_OC_EnableClear
CCMR2 OC3CE LL_TIM_OC_EnableClear
CCMR2 OC4CE LL_TIM_OC_EnableClear
CCMR3 OC5CE LL_TIM_OC_EnableClear
CCMR3 OC6CE LL_TIM_OC_EnableClear

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2329 of file stm32l4xx_ll_tim.h.

Enable fast mode for the output channel.

Note:

Acts only if the channel is configured in PWM1 or PWM2 mode. CCMR1 OC1FE LL_TIM_OC_EnableFast
CCMR1 OC2FE LL_TIM_OC_EnableFast
CCMR2 OC3FE LL_TIM_OC_EnableFast
CCMR2 OC4FE LL_TIM_OC_EnableFast
CCMR3 OC5FE LL_TIM_OC_EnableFast
CCMR3 OC6FE LL_TIM_OC_EnableFast

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2172 of file stm32l4xx_ll_tim.h.

Enable compare register (TIMx_CCRx) preload for the output channel.

CCMR1 OC1PE LL_TIM_OC_EnablePreload
CCMR1 OC2PE LL_TIM_OC_EnablePreload
CCMR2 OC3PE LL_TIM_OC_EnablePreload
CCMR2 OC4PE LL_TIM_OC_EnablePreload
CCMR3 OC5PE LL_TIM_OC_EnablePreload
CCMR3 OC6PE LL_TIM_OC_EnablePreload

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2250 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR1) set for output channel 1.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not output channel 1 is supported by a timer instance. CCR1 CCR1 LL_TIM_OC_GetCompareCH1

Parameters:

TIMx	Timer instance

Return values:

CompareValue

(between Min_Data=0 and Max_Data=65535)

Definition at line 2515 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR2) set for output channel 2.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not output channel 2 is supported by a timer instance. CCR2 CCR2 LL_TIM_OC_GetCompareCH2

Parameters:

TIMx	Timer instance

Return values:

CompareValue

(between Min_Data=0 and Max_Data=65535)

Definition at line 2531 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR3) set for output channel 3.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not output channel 3 is supported by a timer instance. CCR3 CCR3 LL_TIM_OC_GetCompareCH3

Parameters:

TIMx	Timer instance

Return values:

CompareValue

(between Min_Data=0 and Max_Data=65535)

Definition at line 2547 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR4) set for output channel 4.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not output channel 4 is supported by a timer instance. CCR4 CCR4 LL_TIM_OC_GetCompareCH4

Parameters:

TIMx	Timer instance

Return values:

CompareValue

(between Min_Data=0 and Max_Data=65535)

Definition at line 2563 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR5) set for output channel 5.

Note:

Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not output channel 5 is supported by a timer instance. CCR5 CCR5 LL_TIM_OC_GetCompareCH5

Parameters:

TIMx	Timer instance

Return values:

CompareValue

(between Min_Data=0 and Max_Data=65535)

Definition at line 2576 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR6) set for output channel 6.

Note:

Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not output channel 6 is supported by a timer instance. CCR6 CCR6 LL_TIM_OC_GetCompareCH6

Parameters:

TIMx	Timer instance

Return values:

CompareValue

(between Min_Data=0 and Max_Data=65535)

Definition at line 2589 of file stm32l4xx_ll_tim.h.

Get the IDLE state of an output channel CR2 OIS1 LL_TIM_OC_GetIdleState
CR2 OIS2N LL_TIM_OC_GetIdleState
CR2 OIS2 LL_TIM_OC_GetIdleState
CR2 OIS2N LL_TIM_OC_GetIdleState
CR2 OIS3 LL_TIM_OC_GetIdleState
CR2 OIS3N LL_TIM_OC_GetIdleState
CR2 OIS4 LL_TIM_OC_GetIdleState
CR2 OIS5 LL_TIM_OC_GetIdleState
CR2 OIS6 LL_TIM_OC_GetIdleState.

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

Returned

value can be one of the following values: LL_TIM_OCIDLESTATE_LOW LL_TIM_OCIDLESTATE_HIGH

Definition at line 2147 of file stm32l4xx_ll_tim.h.

Get the output compare mode of an output channel.

CCMR1 OC1M LL_TIM_OC_GetMode
CCMR1 OC2M LL_TIM_OC_GetMode
CCMR2 OC3M LL_TIM_OC_GetMode
CCMR2 OC4M LL_TIM_OC_GetMode
CCMR3 OC5M LL_TIM_OC_GetMode
CCMR3 OC6M LL_TIM_OC_GetMode

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

Returned

value can be one of the following values: LL_TIM_OCMODE_FROZEN LL_TIM_OCMODE_ACTIVE LL_TIM_OCMODE_INACTIVE LL_TIM_OCMODE_TOGGLE LL_TIM_OCMODE_FORCED_INACTIVE LL_TIM_OCMODE_FORCED_ACTIVE LL_TIM_OCMODE_PWM1 LL_TIM_OCMODE_PWM2 LL_TIM_OCMODE_RETRIG_OPM1 LL_TIM_OCMODE_RETRIG_OPM2 LL_TIM_OCMODE_COMBINED_PWM1 LL_TIM_OCMODE_COMBINED_PWM2 LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASSYMETRIC_PWM2

Definition at line 2012 of file stm32l4xx_ll_tim.h.

Get the polarity of an output channel.

CCER CC1P LL_TIM_OC_GetPolarity
CCER CC1NP LL_TIM_OC_GetPolarity
CCER CC2P LL_TIM_OC_GetPolarity
CCER CC2NP LL_TIM_OC_GetPolarity
CCER CC3P LL_TIM_OC_GetPolarity
CCER CC3NP LL_TIM_OC_GetPolarity
CCER CC4P LL_TIM_OC_GetPolarity
CCER CC5P LL_TIM_OC_GetPolarity
CCER CC6P LL_TIM_OC_GetPolarity

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

Returned

value can be one of the following values: LL_TIM_OCPOLARITY_HIGH LL_TIM_OCPOLARITY_LOW

Definition at line 2078 of file stm32l4xx_ll_tim.h.

Indicates clearing the output channel on an external event is enabled for the output channel.

Note:

This function enables clearing the output channel on an external event.

This function can only be used in Output compare and PWM modes. It does not work in Forced mode.

Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether or not a timer instance can clear the OCxREF signal on an external event. CCMR1 OC1CE LL_TIM_OC_IsEnabledClear
CCMR1 OC2CE LL_TIM_OC_IsEnabledClear
CCMR2 OC3CE LL_TIM_OC_IsEnabledClear
CCMR2 OC4CE LL_TIM_OC_IsEnabledClear
CCMR3 OC5CE LL_TIM_OC_IsEnabledClear
CCMR3 OC6CE LL_TIM_OC_IsEnabledClear

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

State

of bit (1 or 0).

Definition at line 2385 of file stm32l4xx_ll_tim.h.

Indicates whether fast mode is enabled for the output channel.

CCMR1 OC1FE LL_TIM_OC_IsEnabledFast
CCMR1 OC2FE LL_TIM_OC_IsEnabledFast
CCMR2 OC3FE LL_TIM_OC_IsEnabledFast
CCMR2 OC4FE LL_TIM_OC_IsEnabledFast
CCMR3 OC5FE LL_TIM_OC_IsEnabledFast
CCMR3 OC6FE LL_TIM_OC_IsEnabledFast

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

State

of bit (1 or 0).

Definition at line 2224 of file stm32l4xx_ll_tim.h.

Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel.

CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload
CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload
CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload
CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload
CCMR3 OC5PE LL_TIM_OC_IsEnabledPreload
CCMR3 OC6PE LL_TIM_OC_IsEnabledPreload

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

State

of bit (1 or 0).

Definition at line 2300 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 1 (TIMx_CCR1).

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not output channel 1 is supported by a timer instance. CCR1 CCR1 LL_TIM_OC_SetCompareCH1

Parameters:

TIMx	Timer instance
CompareValue	between Min_Data=0 and Max_Data=65535

Return values:

None

Definition at line 2420 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 2 (TIMx_CCR2).

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not output channel 2 is supported by a timer instance. CCR2 CCR2 LL_TIM_OC_SetCompareCH2

Parameters:

TIMx	Timer instance
CompareValue	between Min_Data=0 and Max_Data=65535

Return values:

None

Definition at line 2437 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 3 (TIMx_CCR3).

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not output channel is supported by a timer instance. CCR3 CCR3 LL_TIM_OC_SetCompareCH3

Parameters:

TIMx	Timer instance
CompareValue	between Min_Data=0 and Max_Data=65535

Return values:

None

Definition at line 2454 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 4 (TIMx_CCR4).

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not output channel 4 is supported by a timer instance. CCR4 CCR4 LL_TIM_OC_SetCompareCH4

Parameters:

TIMx	Timer instance
CompareValue	between Min_Data=0 and Max_Data=65535

Return values:

None

Definition at line 2471 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 5 (TIMx_CCR5).

Note:

Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not output channel 5 is supported by a timer instance. CCR5 CCR5 LL_TIM_OC_SetCompareCH5

Parameters:

TIMx	Timer instance
CompareValue	between Min_Data=0 and Max_Data=65535

Return values:

None

Definition at line 2485 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 6 (TIMx_CCR6).

Note:

Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not output channel 6 is supported by a timer instance. CCR6 CCR6 LL_TIM_OC_SetCompareCH6

Parameters:

TIMx	Timer instance
CompareValue	between Min_Data=0 and Max_Data=65535

Return values:

None

Definition at line 2499 of file stm32l4xx_ll_tim.h.

Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge if the Ocx and OCxN signals).

Note:

Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not dead-time insertion feature is supported by a timer instance.

Helper macro __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter BDTR DTG LL_TIM_OC_SetDeadTime

Parameters:

TIMx	Timer instance
DeadTime	between Min_Data=0 and Max_Data=255

Return values:

None

Definition at line 2403 of file stm32l4xx_ll_tim.h.

Set the IDLE state of an output channel.

Note:

This function is significant only for the timer instances supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not a timer instance provides a break input. CR2 OIS1 LL_TIM_OC_SetIdleState
CR2 OIS2N LL_TIM_OC_SetIdleState
CR2 OIS2 LL_TIM_OC_SetIdleState
CR2 OIS2N LL_TIM_OC_SetIdleState
CR2 OIS3 LL_TIM_OC_SetIdleState
CR2 OIS3N LL_TIM_OC_SetIdleState
CR2 OIS4 LL_TIM_OC_SetIdleState
CR2 OIS5 LL_TIM_OC_SetIdleState
CR2 OIS6 LL_TIM_OC_SetIdleState

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
IdleState	This parameter can be one of the following values: LL_TIM_OCIDLESTATE_LOW LL_TIM_OCIDLESTATE_HIGH

Return values:

None

Definition at line 2115 of file stm32l4xx_ll_tim.h.

Define the behavior of the output reference signal OCxREF from which OCx and OCxN (when relevant) are derived.

CCMR1 OC1M LL_TIM_OC_SetMode
CCMR1 OC2M LL_TIM_OC_SetMode
CCMR2 OC3M LL_TIM_OC_SetMode
CCMR2 OC4M LL_TIM_OC_SetMode
CCMR3 OC5M LL_TIM_OC_SetMode
CCMR3 OC6M LL_TIM_OC_SetMode

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
Mode	This parameter can be one of the following values: LL_TIM_OCMODE_FROZEN LL_TIM_OCMODE_ACTIVE LL_TIM_OCMODE_INACTIVE LL_TIM_OCMODE_TOGGLE LL_TIM_OCMODE_FORCED_INACTIVE LL_TIM_OCMODE_FORCED_ACTIVE LL_TIM_OCMODE_PWM1 LL_TIM_OCMODE_PWM2 LL_TIM_OCMODE_RETRIG_OPM1 LL_TIM_OCMODE_RETRIG_OPM2 LL_TIM_OCMODE_COMBINED_PWM1 LL_TIM_OCMODE_COMBINED_PWM2 LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASSYMETRIC_PWM2

Return values:

None

Definition at line 1973 of file stm32l4xx_ll_tim.h.

Set the polarity of an output channel.

CCER CC1P LL_TIM_OC_SetPolarity
CCER CC1NP LL_TIM_OC_SetPolarity
CCER CC2P LL_TIM_OC_SetPolarity
CCER CC2NP LL_TIM_OC_SetPolarity
CCER CC3P LL_TIM_OC_SetPolarity
CCER CC3NP LL_TIM_OC_SetPolarity
CCER CC4P LL_TIM_OC_SetPolarity
CCER CC5P LL_TIM_OC_SetPolarity
CCER CC6P LL_TIM_OC_SetPolarity

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
Polarity	This parameter can be one of the following values: LL_TIM_OCPOLARITY_HIGH LL_TIM_OCPOLARITY_LOW

Return values:

None

Definition at line 2046 of file stm32l4xx_ll_tim.h.

Select on which reference signal the OC5REF is combined to.

Note:

Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check whether or not a timer instance supports the combined 3-phase PWM mode. CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels
CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels
CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels

Parameters:

TIMx	Timer instance
GroupCH5	This parameter can be one of the following values: LL_TIM_GROUPCH5_NONE LL_TIM_GROUPCH5_OC1REFC LL_TIM_GROUPCH5_OC2REFC LL_TIM_GROUPCH5_OC3REFC

Return values:

None

Definition at line 2609 of file stm32l4xx_ll_tim.h.