display funciona!
Dependents: 2018_I2C_LCD_03 TBI_FIAT_FEEDFORWARD Ignition Can_between_NUCLEOS_LCD ... more
Fork of TextLCD by
TextLCD.cpp@30:033048611c01, 2014-06-28 (annotated)
- Committer:
- wim
- Date:
- Sat Jun 28 14:27:32 2014 +0000
- Revision:
- 30:033048611c01
- Parent:
- 29:a3663151aa65
- Child:
- 31:ef31cd8a00d1
Tested AIP31068 for I2C, tested SPI3_9 and SPI3_10
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
simon | 1:ac48b187213c | 1 | /* mbed TextLCD Library, for a 4-bit LCD based on HD44780 |
simon | 6:e4cb7ddee0d3 | 2 | * Copyright (c) 2007-2010, sford, http://mbed.org |
wim | 14:0c32b66b14b8 | 3 | * 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs |
wim | 14:0c32b66b14b8 | 4 | * 2013, v02: WH, Added I2C and SPI bus interfaces |
wim | 15:b70ebfffb258 | 5 | * 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers |
wim | 18:bd65dc10f27f | 6 | * 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess |
wim | 18:bd65dc10f27f | 7 | * 2013, v05: WH, Added support for 8x2B, added some UDCs |
wim | 19:c747b9e2e7b8 | 8 | * 2013, v06: WH, Added support for devices that use internal DC/DC converters |
wim | 20:e0da005a777f | 9 | * 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT |
wim | 22:35742ec80c24 | 10 | * 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined pins |
wim | 25:6162b31128c9 | 11 | * 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032 |
wim | 26:bd897a001012 | 12 | * 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module |
wim | 30:033048611c01 | 13 | * 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers |
simon | 1:ac48b187213c | 14 | * |
simon | 1:ac48b187213c | 15 | * Permission is hereby granted, free of charge, to any person obtaining a copy |
simon | 1:ac48b187213c | 16 | * of this software and associated documentation files (the "Software"), to deal |
simon | 1:ac48b187213c | 17 | * in the Software without restriction, including without limitation the rights |
simon | 1:ac48b187213c | 18 | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
simon | 1:ac48b187213c | 19 | * copies of the Software, and to permit persons to whom the Software is |
simon | 1:ac48b187213c | 20 | * furnished to do so, subject to the following conditions: |
simon | 1:ac48b187213c | 21 | * |
simon | 1:ac48b187213c | 22 | * The above copyright notice and this permission notice shall be included in |
simon | 1:ac48b187213c | 23 | * all copies or substantial portions of the Software. |
simon | 1:ac48b187213c | 24 | * |
simon | 1:ac48b187213c | 25 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
simon | 1:ac48b187213c | 26 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
simon | 1:ac48b187213c | 27 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
simon | 1:ac48b187213c | 28 | * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
simon | 1:ac48b187213c | 29 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
simon | 1:ac48b187213c | 30 | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
simon | 1:ac48b187213c | 31 | * THE SOFTWARE. |
simon | 1:ac48b187213c | 32 | */ |
simon | 1:ac48b187213c | 33 | |
simon | 1:ac48b187213c | 34 | #include "TextLCD.h" |
simon | 1:ac48b187213c | 35 | #include "mbed.h" |
simon | 1:ac48b187213c | 36 | |
wim | 30:033048611c01 | 37 | //For Testing only |
wim | 30:033048611c01 | 38 | //DigitalOut led1(LED1); |
wim | 30:033048611c01 | 39 | //DigitalOut led2(LED2); |
wim | 30:033048611c01 | 40 | // led2=!led2; |
wim | 29:a3663151aa65 | 41 | |
wim | 29:a3663151aa65 | 42 | |
wim | 30:033048611c01 | 43 | /** Some sample User Defined Chars 5x7 dots */ |
wim | 30:033048611c01 | 44 | const char udc_ae[] = {0x00, 0x00, 0x1B, 0x05, 0x1F, 0x14, 0x1F, 0x00}; //æ |
wim | 30:033048611c01 | 45 | const char udc_0e[] = {0x00, 0x00, 0x0E, 0x13, 0x15, 0x19, 0x0E, 0x00}; //ø |
wim | 30:033048611c01 | 46 | const char udc_ao[] = {0x0E, 0x0A, 0x0E, 0x01, 0x0F, 0x11, 0x0F, 0x00}; //å |
wim | 30:033048611c01 | 47 | const char udc_AE[] = {0x0F, 0x14, 0x14, 0x1F, 0x14, 0x14, 0x17, 0x00}; //Æ |
wim | 30:033048611c01 | 48 | const char udc_0E[] = {0x0E, 0x13, 0x15, 0x15, 0x15, 0x19, 0x0E, 0x00}; //Ø |
wim | 30:033048611c01 | 49 | const char udc_Ao[] = {0x0E, 0x0A, 0x0E, 0x11, 0x1F, 0x11, 0x11, 0x00}; //Å |
wim | 30:033048611c01 | 50 | const char udc_PO[] = {0x04, 0x0A, 0x0A, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Open |
wim | 30:033048611c01 | 51 | const char udc_PC[] = {0x1C, 0x10, 0x08, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Closed |
wim | 30:033048611c01 | 52 | |
wim | 30:033048611c01 | 53 | const char udc_0[] = {0x18, 0x14, 0x12, 0x11, 0x12, 0x14, 0x18, 0x00}; // |> |
wim | 30:033048611c01 | 54 | const char udc_1[] = {0x03, 0x05, 0x09, 0x11, 0x09, 0x05, 0x03, 0x00}; // <| |
wim | 30:033048611c01 | 55 | const char udc_2[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // | |
wim | 30:033048611c01 | 56 | const char udc_3[] = {0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00}; // || |
wim | 30:033048611c01 | 57 | const char udc_4[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x00}; // ||| |
wim | 30:033048611c01 | 58 | const char udc_5[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x00}; // = |
wim | 30:033048611c01 | 59 | const char udc_6[] = {0x15, 0x0a, 0x15, 0x0a, 0x15, 0x0a, 0x15, 0x00}; // checkerboard |
wim | 30:033048611c01 | 60 | const char udc_7[] = {0x10, 0x08, 0x04, 0x02, 0x01, 0x00, 0x10, 0x00}; // \ |
wim | 30:033048611c01 | 61 | |
wim | 30:033048611c01 | 62 | const char udc_degr[] = {0x06, 0x09, 0x09, 0x06, 0x00, 0x00, 0x00, 0x00}; // Degree symbol |
wim | 30:033048611c01 | 63 | |
wim | 30:033048611c01 | 64 | const char udc_TM_T[] = {0x1F, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00}; // Trademark T |
wim | 30:033048611c01 | 65 | const char udc_TM_M[] = {0x11, 0x1B, 0x15, 0x11, 0x00, 0x00, 0x00, 0x00}; // Trademark M |
wim | 30:033048611c01 | 66 | |
wim | 30:033048611c01 | 67 | //const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full |
wim | 30:033048611c01 | 68 | //const char udc_Bat_Ha[] = {0x0E, 0x11, 0x13, 0x17, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half |
wim | 30:033048611c01 | 69 | //const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x00}; // Battery Low |
wim | 30:033048611c01 | 70 | const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full |
wim | 30:033048611c01 | 71 | const char udc_Bat_Ha[] = {0x0E, 0x11, 0x11, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half |
wim | 30:033048611c01 | 72 | const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x1F, 0x00}; // Battery Low |
wim | 30:033048611c01 | 73 | const char udc_AC[] = {0x0A, 0x0A, 0x1F, 0x11, 0x0E, 0x04, 0x04, 0x00}; // AC Power |
wim | 30:033048611c01 | 74 | |
wim | 30:033048611c01 | 75 | //const char udc_smiley[] = {0x00, 0x0A, 0x00, 0x04, 0x11, 0x0E, 0x00, 0x00}; // Smiley |
wim | 30:033048611c01 | 76 | //const char udc_droopy[] = {0x00, 0x0A, 0x00, 0x04, 0x00, 0x0E, 0x11, 0x00}; // Droopey |
wim | 30:033048611c01 | 77 | //const char udc_note[] = {0x01, 0x03, 0x05, 0x09, 0x0B, 0x1B, 0x18, 0x00}; // Note |
wim | 30:033048611c01 | 78 | |
wim | 30:033048611c01 | 79 | //const char udc_bar_1[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // Bar 1 |
wim | 30:033048611c01 | 80 | //const char udc_bar_2[] = {0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00}; // Bar 11 |
wim | 30:033048611c01 | 81 | //const char udc_bar_3[] = {0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x00}; // Bar 111 |
wim | 30:033048611c01 | 82 | //const char udc_bar_4[] = {0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x00}; // Bar 1111 |
wim | 30:033048611c01 | 83 | //const char udc_bar_5[] = {0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Bar 11111 |
wim | 30:033048611c01 | 84 | |
wim | 30:033048611c01 | 85 | //const char udc_ch_1[] = {0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00}; // Hor bars 4 |
wim | 30:033048611c01 | 86 | //const char udc_ch_2[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f}; // Hor bars 4 (inverted) |
wim | 30:033048611c01 | 87 | //const char udc_ch_3[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15}; // Ver bars 3 |
wim | 30:033048611c01 | 88 | //const char udc_ch_4[] = {0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a}; // Ver bars 3 (inverted) |
wim | 30:033048611c01 | 89 | //const char udc_ch_yr[] = {0x08, 0x0f, 0x12, 0x0f, 0x0a, 0x1f, 0x02, 0x02}; // Year (kana) |
wim | 30:033048611c01 | 90 | //const char udc_ch_mo[] = {0x0f, 0x09, 0x0f, 0x09, 0x0f, 0x09, 0x09, 0x13}; // Month (kana) |
wim | 30:033048611c01 | 91 | //const char udc_ch_dy[] = {0x1f, 0x11, 0x11, 0x1f, 0x11, 0x11, 0x11, 0x1F}; // Day (kana) |
wim | 30:033048611c01 | 92 | //const char udc_ch_mi[] = {0x0C, 0x0a, 0x11, 0x1f, 0x09, 0x09, 0x09, 0x13}; // minute (kana) |
wim | 30:033048611c01 | 93 | |
wim | 30:033048611c01 | 94 | |
wim | 21:9eb628d9e164 | 95 | /** Create a TextLCD_Base interface |
wim | 15:b70ebfffb258 | 96 | * |
wim | 21:9eb628d9e164 | 97 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 21:9eb628d9e164 | 98 | * @param ctrl LCD controller (default = HD44780) |
wim | 15:b70ebfffb258 | 99 | */ |
wim | 21:9eb628d9e164 | 100 | TextLCD_Base::TextLCD_Base(LCDType type, LCDCtrl ctrl) : _type(type), _ctrl(ctrl) { |
wim | 30:033048611c01 | 101 | |
wim | 30:033048611c01 | 102 | // Extract LCDType data |
wim | 30:033048611c01 | 103 | |
wim | 30:033048611c01 | 104 | // Columns encoded in b7..b0 |
wim | 30:033048611c01 | 105 | _nr_cols = (_type & 0xFF); |
wim | 30:033048611c01 | 106 | |
wim | 30:033048611c01 | 107 | // Rows encoded in b15..b8 |
wim | 30:033048611c01 | 108 | _nr_rows = ((_type >> 8) & 0xFF); |
wim | 30:033048611c01 | 109 | |
wim | 30:033048611c01 | 110 | // Addressing mode encoded in b19..b16 |
wim | 30:033048611c01 | 111 | _addr_mode = _type & LCD_T_ADR_MSK; |
wim | 14:0c32b66b14b8 | 112 | } |
wim | 14:0c32b66b14b8 | 113 | |
wim | 14:0c32b66b14b8 | 114 | |
wim | 21:9eb628d9e164 | 115 | /** Init the LCD Controller(s) |
wim | 21:9eb628d9e164 | 116 | * Clear display |
wim | 21:9eb628d9e164 | 117 | */ |
wim | 21:9eb628d9e164 | 118 | void TextLCD_Base::_init() { |
wim | 15:b70ebfffb258 | 119 | |
wim | 15:b70ebfffb258 | 120 | // Select and configure second LCD controller when needed |
wim | 15:b70ebfffb258 | 121 | if(_type==LCD40x4) { |
wim | 30:033048611c01 | 122 | _ctrl_idx=_LCDCtrl_1; // Select 2nd controller |
wim | 30:033048611c01 | 123 | _initCtrl(); // Init 2nd controller |
wim | 15:b70ebfffb258 | 124 | } |
wim | 15:b70ebfffb258 | 125 | |
wim | 15:b70ebfffb258 | 126 | // Select and configure primary LCD controller |
wim | 27:22d5086f6ba6 | 127 | _ctrl_idx=_LCDCtrl_0; // Select primary controller |
wim | 19:c747b9e2e7b8 | 128 | _initCtrl(); // Init primary controller |
wim | 28:30fa94f7341c | 129 | |
wim | 28:30fa94f7341c | 130 | // Reset Cursor location |
wim | 28:30fa94f7341c | 131 | _row=0; |
wim | 30:033048611c01 | 132 | _column=0; |
wim | 30:033048611c01 | 133 | |
wim | 15:b70ebfffb258 | 134 | } |
wim | 15:b70ebfffb258 | 135 | |
wim | 21:9eb628d9e164 | 136 | /** Init the LCD controller |
wim | 21:9eb628d9e164 | 137 | * 4-bit mode, number of lines, fonttype, no cursor etc |
wim | 30:033048611c01 | 138 | * |
wim | 30:033048611c01 | 139 | * Note: some configurations are commented out because they have not yet been tested due to lack of hardware |
wim | 21:9eb628d9e164 | 140 | */ |
wim | 21:9eb628d9e164 | 141 | void TextLCD_Base::_initCtrl() { |
wim | 15:b70ebfffb258 | 142 | |
wim | 26:bd897a001012 | 143 | this->_setRS(false); // command mode |
wim | 13:24506ba22480 | 144 | |
wim | 26:bd897a001012 | 145 | wait_ms(20); // Wait 20ms to ensure powered up |
simon | 1:ac48b187213c | 146 | |
wim | 17:652ab113bc2e | 147 | // send "Display Settings" 3 times (Only top nibble of 0x30 as we've got 4-bit bus) |
wim | 17:652ab113bc2e | 148 | for (int i=0; i<3; i++) { |
wim | 17:652ab113bc2e | 149 | _writeNibble(0x3); |
wim | 20:e0da005a777f | 150 | wait_ms(15); // This command takes 1.64ms, so wait for it |
wim | 17:652ab113bc2e | 151 | } |
wim | 17:652ab113bc2e | 152 | _writeNibble(0x2); // 4-bit mode |
wim | 17:652ab113bc2e | 153 | wait_us(40); // most instructions take 40us |
wim | 18:bd65dc10f27f | 154 | |
wim | 18:bd65dc10f27f | 155 | // Display is now in 4-bit mode |
wim | 27:22d5086f6ba6 | 156 | // Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 25:6162b31128c9 | 157 | |
wim | 29:a3663151aa65 | 158 | // Device specific initialisations: DC/DC converter to generate VLCD or VLED, number of lines etc |
wim | 19:c747b9e2e7b8 | 159 | switch (_ctrl) { |
wim | 29:a3663151aa65 | 160 | case KS0078: |
wim | 29:a3663151aa65 | 161 | |
wim | 29:a3663151aa65 | 162 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 163 | switch (_type) { |
wim | 29:a3663151aa65 | 164 | case LCD8x1: //8x1 is a regular 1 line display |
wim | 29:a3663151aa65 | 165 | case LCD8x2B: //8x2B is a special case of 16x1 |
wim | 29:a3663151aa65 | 166 | // case LCD12x1: |
wim | 29:a3663151aa65 | 167 | case LCD16x1: |
wim | 30:033048611c01 | 168 | // case LCD20x1: |
wim | 29:a3663151aa65 | 169 | case LCD24x1: |
wim | 30:033048611c01 | 170 | _writeCommand(0x20); // Function set 001 DL N RE(0) DH REV |
wim | 30:033048611c01 | 171 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 172 | // N=0 (1 line) |
wim | 30:033048611c01 | 173 | // RE=0 (Dis. Extended Regs, special mode for KS0078) |
wim | 30:033048611c01 | 174 | // DH=0 (Disp shift=disable, special mode for KS0078) |
wim | 30:033048611c01 | 175 | // REV=0 (Reverse=Normal, special mode for KS0078) |
wim | 30:033048611c01 | 176 | |
wim | 30:033048611c01 | 177 | |
wim | 30:033048611c01 | 178 | |
wim | 29:a3663151aa65 | 179 | break; |
wim | 29:a3663151aa65 | 180 | |
wim | 30:033048611c01 | 181 | // case LCD12x3D: // Special mode for KS0078 |
wim | 30:033048611c01 | 182 | // case LCD12x3D1: // Special mode for KS0078 |
wim | 30:033048611c01 | 183 | // case LCD12x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 184 | // case LCD16x3D: |
wim | 30:033048611c01 | 185 | // case LCD16x4D: |
wim | 30:033048611c01 | 186 | // case LCD24x3D: // Special mode for KS0078 |
wim | 30:033048611c01 | 187 | // case LCD24x3D1: // Special mode for KS0078 |
wim | 30:033048611c01 | 188 | case LCD24x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 189 | |
wim | 30:033048611c01 | 190 | _writeCommand(0x2A); // Function set 001 DL N RE(0) DH REV |
wim | 29:a3663151aa65 | 191 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 192 | // N=1 (Dont care for KS0078 in 4-line mode) |
wim | 29:a3663151aa65 | 193 | // RE=0 (Dis. Extended Regs, special mode for KS0078) |
wim | 30:033048611c01 | 194 | // DH=1 (Disp shift=enable, special mode for KS0078) |
wim | 30:033048611c01 | 195 | // REV=0 (Reverse=Normal, special mode for KS0078) |
wim | 29:a3663151aa65 | 196 | |
wim | 30:033048611c01 | 197 | _writeCommand(0x2E); // Function set 001 DL N RE(1) BE 0 |
wim | 29:a3663151aa65 | 198 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 199 | // N=1 (Dont care for KS0078 in 4-line mode) |
wim | 29:a3663151aa65 | 200 | // RE=1 (Ena Extended Regs, special mode for KS0078) |
wim | 30:033048611c01 | 201 | // BE=1 (Blink Enable, CG/SEG RAM, special mode for KS0078) |
wim | 30:033048611c01 | 202 | // X=0 (Reverse, special mode for KS0078) |
wim | 29:a3663151aa65 | 203 | |
wim | 29:a3663151aa65 | 204 | _writeCommand(0x09); // Ext Function set 0000 1 FW BW NW |
wim | 29:a3663151aa65 | 205 | // FW=0 (5-dot font, special mode for KS0078) |
wim | 29:a3663151aa65 | 206 | // BW=0 (Cur BW invert disable, special mode for KS0078) |
wim | 29:a3663151aa65 | 207 | // NW=1 (4 Line, special mode for KS0078) |
wim | 29:a3663151aa65 | 208 | |
wim | 30:033048611c01 | 209 | _writeCommand(0x2A); // Function set 001 DL N RE(0) DH REV |
wim | 29:a3663151aa65 | 210 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 211 | // N=1 (Dont care for KS0078 in 4 line mode) |
wim | 29:a3663151aa65 | 212 | // RE=0 (Dis. Extended Regs, special mode for KS0078) |
wim | 30:033048611c01 | 213 | // DH=1 (Disp shift enable, special mode for KS0078) |
wim | 30:033048611c01 | 214 | // REV=0 (Reverse normal, special mode for KS0078) |
wim | 30:033048611c01 | 215 | break; |
wim | 30:033048611c01 | 216 | |
wim | 29:a3663151aa65 | 217 | default: |
wim | 30:033048611c01 | 218 | // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4) |
wim | 30:033048611c01 | 219 | _writeCommand(0x28); // Function set 001 DL N RE(0) DH REV |
wim | 30:033048611c01 | 220 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 221 | // Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 30:033048611c01 | 222 | // N=1 (2 lines) |
wim | 30:033048611c01 | 223 | // RE=0 (Dis. Extended Regs, special mode for KS0078) |
wim | 30:033048611c01 | 224 | // DH=0 (Disp shift=disable, special mode for KS0078) |
wim | 30:033048611c01 | 225 | // REV=0 (Reverse=Normal, special mode for KS0078) |
wim | 30:033048611c01 | 226 | |
wim | 29:a3663151aa65 | 227 | break; |
wim | 29:a3663151aa65 | 228 | } // switch type |
wim | 29:a3663151aa65 | 229 | |
wim | 29:a3663151aa65 | 230 | break; // case KS0078 Controller |
wim | 29:a3663151aa65 | 231 | |
wim | 26:bd897a001012 | 232 | case ST7032_3V3: |
wim | 26:bd897a001012 | 233 | // ST7032 controller: Initialise Voltage booster for VLCD. VDD=3V3 |
wim | 27:22d5086f6ba6 | 234 | |
wim | 29:a3663151aa65 | 235 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 236 | switch (_type) { |
wim | 29:a3663151aa65 | 237 | case LCD8x1: //8x1 is a regular 1 line display |
wim | 29:a3663151aa65 | 238 | case LCD8x2B: //8x2B is a special case of 16x1 |
wim | 29:a3663151aa65 | 239 | // case LCD12x1: |
wim | 29:a3663151aa65 | 240 | case LCD16x1: |
wim | 30:033048611c01 | 241 | // case LCD20x1: |
wim | 29:a3663151aa65 | 242 | case LCD24x1: |
wim | 29:a3663151aa65 | 243 | _writeCommand(0x21); //FUNCTION SET 4 bit, N=0 1-line display mode, 5*7dot, Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 244 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 245 | |
wim | 29:a3663151aa65 | 246 | _writeCommand(0x1C); //Internal OSC frequency adjustment Framefreq=183HZ, bias will be 1/4 |
wim | 28:30fa94f7341c | 247 | |
wim | 29:a3663151aa65 | 248 | _writeCommand(0x73); //Contrast control low byte |
wim | 28:30fa94f7341c | 249 | |
wim | 29:a3663151aa65 | 250 | _writeCommand(0x57); //booster circuit is turned on. /ICON display off. /Contrast control high byte |
wim | 29:a3663151aa65 | 251 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 252 | |
wim | 29:a3663151aa65 | 253 | _writeCommand(0x6C); //Follower control |
wim | 29:a3663151aa65 | 254 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 28:30fa94f7341c | 255 | |
wim | 29:a3663151aa65 | 256 | _writeCommand(0x20); //FUNCTION SET 4 bit, N=0 1-line display mode, 5*7dot, Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 257 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 30:033048611c01 | 258 | break; |
wim | 29:a3663151aa65 | 259 | |
wim | 30:033048611c01 | 260 | case LCD12x3D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 261 | case LCD12x3D1: // Special mode for PCF2116 |
wim | 30:033048611c01 | 262 | case LCD12x4D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 263 | case LCD24x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 264 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 29:a3663151aa65 | 265 | break; |
wim | 29:a3663151aa65 | 266 | |
wim | 29:a3663151aa65 | 267 | default: |
wim | 29:a3663151aa65 | 268 | // All other LCD types are initialised as 2 Line displays |
wim | 29:a3663151aa65 | 269 | _writeCommand(0x29); //FUNCTION SET 4 bit, N=1 2-line display mode, 5*7dot, Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 270 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 271 | |
wim | 29:a3663151aa65 | 272 | _writeCommand(0x1C); //Internal OSC frequency adjustment Framefreq=183HZ, bias will be 1/4 |
wim | 29:a3663151aa65 | 273 | |
wim | 29:a3663151aa65 | 274 | _writeCommand(0x73); //Contrast control low byte |
wim | 29:a3663151aa65 | 275 | |
wim | 29:a3663151aa65 | 276 | _writeCommand(0x57); //booster circuit is turned on. /ICON display off. /Contrast control high byte |
wim | 29:a3663151aa65 | 277 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 28:30fa94f7341c | 278 | |
wim | 29:a3663151aa65 | 279 | _writeCommand(0x6C); //Follower control |
wim | 29:a3663151aa65 | 280 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 281 | |
wim | 29:a3663151aa65 | 282 | _writeCommand(0x28); //FUNCTION SET 4 bit, N=1 2-line display mode, 5*7dot, Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 283 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 284 | } // switch type |
wim | 29:a3663151aa65 | 285 | |
wim | 29:a3663151aa65 | 286 | break; // case ST7032_3V3 Controller |
wim | 26:bd897a001012 | 287 | |
wim | 26:bd897a001012 | 288 | case ST7032_5V: |
wim | 26:bd897a001012 | 289 | // ST7032 controller: Disable Voltage booster for VLCD. VDD=5V |
wim | 29:a3663151aa65 | 290 | |
wim | 29:a3663151aa65 | 291 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 292 | switch (_type) { |
wim | 29:a3663151aa65 | 293 | case LCD8x1: //8x1 is a regular 1 line display |
wim | 29:a3663151aa65 | 294 | case LCD8x2B: //8x2B is a special case of 16x1 |
wim | 29:a3663151aa65 | 295 | // case LCD12x1: |
wim | 29:a3663151aa65 | 296 | case LCD16x1: |
wim | 30:033048611c01 | 297 | // case LCD20x1: |
wim | 29:a3663151aa65 | 298 | case LCD24x1: |
wim | 29:a3663151aa65 | 299 | _writeCommand(0x21); //FUNCTION SET 4 bit, N=0 1-line display mode, 5*7dot, Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 300 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 301 | |
wim | 29:a3663151aa65 | 302 | _writeCommand(0x1C); //Internal OSC frequency adjustment Framefreq=183HZ, bias will be 1/4 |
wim | 29:a3663151aa65 | 303 | |
wim | 29:a3663151aa65 | 304 | _writeCommand(0x73); //Contrast control low byte |
wim | 28:30fa94f7341c | 305 | |
wim | 29:a3663151aa65 | 306 | _writeCommand(0x53); //booster circuit is turned off. /ICON display off. /Contrast control high byte |
wim | 29:a3663151aa65 | 307 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 308 | |
wim | 29:a3663151aa65 | 309 | _writeCommand(0x6C); //Follower control |
wim | 29:a3663151aa65 | 310 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 311 | |
wim | 29:a3663151aa65 | 312 | _writeCommand(0x20); //FUNCTION SET 4 bit, N=0 1-line display mode, 5*7dot, Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 313 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 30:033048611c01 | 314 | break; |
wim | 29:a3663151aa65 | 315 | |
wim | 30:033048611c01 | 316 | case LCD12x3D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 317 | case LCD12x3D1: // Special mode for PCF2116 |
wim | 30:033048611c01 | 318 | case LCD12x4D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 319 | case LCD24x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 320 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 29:a3663151aa65 | 321 | break; |
wim | 28:30fa94f7341c | 322 | |
wim | 29:a3663151aa65 | 323 | default: |
wim | 29:a3663151aa65 | 324 | // All other LCD types are initialised as 2 Line displays |
wim | 29:a3663151aa65 | 325 | _writeCommand(0x29); //FUNCTION SET 4 bit, N=1 2-line display mode, 5*7dot, Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 326 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 327 | |
wim | 29:a3663151aa65 | 328 | _writeCommand(0x1C); //Internal OSC frequency adjustment Framefreq=183HZ, bias will be 1/4 |
wim | 29:a3663151aa65 | 329 | |
wim | 29:a3663151aa65 | 330 | _writeCommand(0x73); //Contrast control low byte |
wim | 29:a3663151aa65 | 331 | |
wim | 29:a3663151aa65 | 332 | _writeCommand(0x53); //booster circuit is turned off. /ICON display off. /Contrast control high byte |
wim | 29:a3663151aa65 | 333 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 334 | |
wim | 29:a3663151aa65 | 335 | _writeCommand(0x6C); //Follower control |
wim | 29:a3663151aa65 | 336 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 337 | |
wim | 29:a3663151aa65 | 338 | _writeCommand(0x28); //FUNCTION SET 4 bit, N=1 2-line display mode, 5*7dot, Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 339 | //Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 340 | } // switch type |
wim | 29:a3663151aa65 | 341 | |
wim | 29:a3663151aa65 | 342 | break; // case ST7032_5V Controller |
wim | 28:30fa94f7341c | 343 | |
wim | 29:a3663151aa65 | 344 | case ST7036: |
wim | 29:a3663151aa65 | 345 | // ST7036 controller: Initialise Voltage booster for VLCD. VDD=5V |
wim | 29:a3663151aa65 | 346 | // Note: supports 1,2 or 3 lines |
wim | 28:30fa94f7341c | 347 | |
wim | 29:a3663151aa65 | 348 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 349 | switch (_type) { |
wim | 29:a3663151aa65 | 350 | case LCD8x1: //8x1 is a regular 1 line display |
wim | 30:033048611c01 | 351 | case LCD8x2B: //8x2D is a special case of 16x1 |
wim | 29:a3663151aa65 | 352 | // case LCD12x1: |
wim | 29:a3663151aa65 | 353 | case LCD16x1: |
wim | 29:a3663151aa65 | 354 | case LCD24x1: |
wim | 29:a3663151aa65 | 355 | _writeCommand(0x21); // 4-bit Databus, N=0 1 Line, DH=0 5x7font, IS2,IS1 = 01 Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 356 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 357 | _writeCommand(0x14); // Bias: 1/5, 1 or 2-Lines LCD |
wim | 29:a3663151aa65 | 358 | // _writeCommand(0x15); // Bias: 1/5, 3-Lines LCD |
wim | 29:a3663151aa65 | 359 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 360 | _writeCommand(0x55); // Icon off, Booster on, Set Contrast C5, C4 |
wim | 29:a3663151aa65 | 361 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 362 | _writeCommand(0x6D); // Voltagefollower On, Ampl ratio Rab2, Rab1, Rab0 |
wim | 29:a3663151aa65 | 363 | wait_ms(200); // > 200ms! |
wim | 29:a3663151aa65 | 364 | _writeCommand(0x78); // Set Contrast C3, C2, C1, C0 |
wim | 29:a3663151aa65 | 365 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 366 | _writeCommand(0x20); // Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 367 | wait_ms(50); |
wim | 29:a3663151aa65 | 368 | break; |
wim | 29:a3663151aa65 | 369 | #if(0) |
wim | 29:a3663151aa65 | 370 | // case LCD12x3: |
wim | 29:a3663151aa65 | 371 | case LCD16x3: |
wim | 29:a3663151aa65 | 372 | _writeCommand(0x29); // 4-bit Databus, N=1 2 Line, DH=0 5x7font, IS2,IS1 = 01 Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 373 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 374 | // _writeCommand(0x14); // Bias: 1/5, 1 or 2-Lines LCD |
wim | 29:a3663151aa65 | 375 | _writeCommand(0x15); // Bias: 1/5, 3-Lines LCD |
wim | 29:a3663151aa65 | 376 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 377 | _writeCommand(0x55); // Icon off, Booster on, Set Contrast C5, C4 |
wim | 29:a3663151aa65 | 378 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 379 | _writeCommand(0x6D); // Voltagefollower On, Ampl ratio Rab2, Rab1, Rab0 |
wim | 29:a3663151aa65 | 380 | wait_ms(200); // > 200ms! |
wim | 29:a3663151aa65 | 381 | _writeCommand(0x78); // Set Contrast C3, C2, C1, C0 |
wim | 29:a3663151aa65 | 382 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 383 | _writeCommand(0x28); // Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 384 | wait_ms(50); |
wim | 29:a3663151aa65 | 385 | break; |
wim | 29:a3663151aa65 | 386 | #endif |
wim | 30:033048611c01 | 387 | |
wim | 30:033048611c01 | 388 | case LCD12x3D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 389 | case LCD12x3D1: // Special mode for PCF2116 |
wim | 30:033048611c01 | 390 | case LCD12x4D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 391 | case LCD24x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 392 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 30:033048611c01 | 393 | break; |
wim | 30:033048611c01 | 394 | |
wim | 29:a3663151aa65 | 395 | default: |
wim | 30:033048611c01 | 396 | // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4) |
wim | 29:a3663151aa65 | 397 | _writeCommand(0x29); // 4-bit Databus, N=1 2 Line, DH=0 5x7font, IS2,IS1 = 01 Select Instruction Set = 1 |
wim | 29:a3663151aa65 | 398 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 399 | _writeCommand(0x14); // Bias: 1/5, 2-Lines LCD |
wim | 29:a3663151aa65 | 400 | // _writeCommand(0x15); // Bias: 1/5, 3-Lines LCD |
wim | 29:a3663151aa65 | 401 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 402 | _writeCommand(0x55); // Icon off, Booster on, Set Contrast C5, C4 |
wim | 29:a3663151aa65 | 403 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 404 | _writeCommand(0x6D); // Voltagefollower On, Ampl ratio Rab2, Rab1, Rab0 |
wim | 29:a3663151aa65 | 405 | wait_ms(200); // > 200ms! |
wim | 29:a3663151aa65 | 406 | _writeCommand(0x78); // Set Contrast C3, C2, C1, C0 |
wim | 29:a3663151aa65 | 407 | wait_ms(30); // > 26,3ms |
wim | 29:a3663151aa65 | 408 | _writeCommand(0x28); // Return to Instruction Set = 0 |
wim | 29:a3663151aa65 | 409 | wait_ms(50); |
wim | 29:a3663151aa65 | 410 | } // switch type |
wim | 29:a3663151aa65 | 411 | |
wim | 29:a3663151aa65 | 412 | break; // case ST7036 Controller |
wim | 29:a3663151aa65 | 413 | |
wim | 30:033048611c01 | 414 | case PCF2113_3V3: |
wim | 30:033048611c01 | 415 | // PCF2113 controller: Initialise Voltage booster for VLCD. VDD=3V3 |
wim | 30:033048611c01 | 416 | // Note1: The PCF21XX family of controllers has several types that dont have an onboard voltage generator for V-LCD. |
wim | 30:033048611c01 | 417 | // You must supply this LCD voltage externally and not enable VGen. |
wim | 30:033048611c01 | 418 | // Note2: The early versions of PCF2116 controllers (eg PCF2116C) can not generate sufficiently negative voltage for the LCD at a VDD of 3V3. |
wim | 30:033048611c01 | 419 | // You must supply this voltage externally and not enable VGen or you must use a higher VDD (e.g. 5V) and enable VGen. |
wim | 30:033048611c01 | 420 | // More recent versions of the controller (eg PCF2116K) have an improved VGen that will work with 3V3. |
wim | 30:033048611c01 | 421 | // Note3: See datasheet, members of the PCF21XX family support different numbers of rows/columns. Not all can support 3 or 4 rows. |
wim | 30:033048611c01 | 422 | // Note4: See datasheet, you can also disable VGen by connecting Vo to VDD. VLCD will then be used directly as LCD voltage. |
wim | 30:033048611c01 | 423 | // Note5: PCF2113 is different wrt to VLCD generator ! |
wim | 30:033048611c01 | 424 | // Note6: See datasheet, the PCF21XX-C and PCF21XX-K use a non-standard character set. This may result is strange text when not corrected.. |
wim | 30:033048611c01 | 425 | |
wim | 29:a3663151aa65 | 426 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 427 | switch (_type) { |
wim | 29:a3663151aa65 | 428 | // case LCD12x1: |
wim | 29:a3663151aa65 | 429 | case LCD24x1: |
wim | 30:033048611c01 | 430 | _writeCommand(0x21); //FUNCTION SET 4 bit, M=0 1-line/24 chars display mode, extended IS |
wim | 30:033048611c01 | 431 | //Note: 4 bit mode is ignored for I2C mode |
wim | 30:033048611c01 | 432 | _writeCommand(0x9F); //Set VLCD A : VGen for Chars and Icons |
wim | 30:033048611c01 | 433 | _writeCommand(0xDF); //Set VLCD B : VGen for Icons Only |
wim | 30:033048611c01 | 434 | _writeCommand(0x20); //FUNCTION SET 4 bit, M=0 1-line/24 chars display mode |
wim | 30:033048611c01 | 435 | // _writeCommand(0x24); //FUNCTION SET 4 bit, M=1 2-line/12 chars display mode, standard IS |
wim | 30:033048611c01 | 436 | |
wim | 30:033048611c01 | 437 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 30:033048611c01 | 438 | break; |
wim | 30:033048611c01 | 439 | |
wim | 30:033048611c01 | 440 | //Tested OK for PCF2113 |
wim | 30:033048611c01 | 441 | //Note: PCF2113 is different wrt to VLCD generator ! |
wim | 30:033048611c01 | 442 | case LCD12x2: |
wim | 30:033048611c01 | 443 | _writeCommand(0x21); //FUNCTION SET 4 bit, M=0 1-line/24 chars display mode, extended IS |
wim | 30:033048611c01 | 444 | //Note: 4 bit mode is ignored for I2C mode |
wim | 30:033048611c01 | 445 | _writeCommand(0x9F); //Set VLCD A : VGen for Chars and Icons |
wim | 30:033048611c01 | 446 | _writeCommand(0xDF); //Set VLCD B : VGen for Icons Only |
wim | 30:033048611c01 | 447 | // _writeCommand(0x20); //FUNCTION SET 4 bit, M=0 1-line/24 chars display mode |
wim | 30:033048611c01 | 448 | _writeCommand(0x24); //FUNCTION SET 4 bit, M=1 2-line/12 chars display mode, standard IS |
wim | 30:033048611c01 | 449 | |
wim | 30:033048611c01 | 450 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 30:033048611c01 | 451 | break; |
wim | 30:033048611c01 | 452 | |
wim | 30:033048611c01 | 453 | default: |
wim | 30:033048611c01 | 454 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 30:033048611c01 | 455 | break; |
wim | 30:033048611c01 | 456 | |
wim | 30:033048611c01 | 457 | } // switch type |
wim | 30:033048611c01 | 458 | |
wim | 30:033048611c01 | 459 | break; // case PCF2113_3V3 Controller |
wim | 30:033048611c01 | 460 | |
wim | 30:033048611c01 | 461 | |
wim | 30:033048611c01 | 462 | |
wim | 30:033048611c01 | 463 | case PCF2116_3V3: |
wim | 30:033048611c01 | 464 | // PCF2116 controller: Initialise Voltage booster for VLCD. VDD=3V3 |
wim | 30:033048611c01 | 465 | // Note1: The PCF21XX family of controllers has several types that dont have an onboard voltage generator for V-LCD. |
wim | 30:033048611c01 | 466 | // You must supply this LCD voltage externally and not enable VGen. |
wim | 30:033048611c01 | 467 | // Note2: The early versions of PCF2116 controllers (eg PCF2116C) can not generate sufficiently negative voltage for the LCD at a VDD of 3V3. |
wim | 30:033048611c01 | 468 | // You must supply this voltage externally and not enable VGen or you must use a higher VDD (e.g. 5V) and enable VGen. |
wim | 30:033048611c01 | 469 | // More recent versions of the controller (eg PCF2116K) have an improved VGen that will work with 3V3. |
wim | 30:033048611c01 | 470 | // Note3: See datasheet, members of the PCF21XX family support different numbers of rows/columns. Not all can support 3 or 4 rows. |
wim | 30:033048611c01 | 471 | // Note4: See datasheet, you can also disable VGen by connecting Vo to VDD. VLCD will then be used directly as LCD voltage. |
wim | 30:033048611c01 | 472 | // Note5: PCF2113 is different wrt to VLCD generator ! |
wim | 30:033048611c01 | 473 | // Note6: See datasheet, the PCF21XX-C and PCF21XX-K use a non-standard character set. This may result is strange text when not corrected.. |
wim | 30:033048611c01 | 474 | |
wim | 30:033048611c01 | 475 | // Initialise Display configuration |
wim | 30:033048611c01 | 476 | switch (_type) { |
wim | 30:033048611c01 | 477 | // case LCD12x1: |
wim | 30:033048611c01 | 478 | // case LCD12x2: |
wim | 30:033048611c01 | 479 | case LCD24x1: |
wim | 30:033048611c01 | 480 | _writeCommand(0x22); //FUNCTION SET 4 bit, N=0/M=0 1-line/24 chars display mode, G=1 VGen on |
wim | 29:a3663151aa65 | 481 | //Note: 4 bit mode is ignored for I2C mode |
wim | 29:a3663151aa65 | 482 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 483 | break; |
wim | 29:a3663151aa65 | 484 | |
wim | 30:033048611c01 | 485 | case LCD12x3D: |
wim | 30:033048611c01 | 486 | case LCD12x3D1: |
wim | 30:033048611c01 | 487 | case LCD12x4D: |
wim | 30:033048611c01 | 488 | _writeCommand(0x2E); //FUNCTION SET 4 bit, N=1/M=1 4-line/12 chars display mode, G=1 VGen on |
wim | 29:a3663151aa65 | 489 | //Note: 4 bit mode is ignored for I2C mode |
wim | 29:a3663151aa65 | 490 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 491 | break; |
wim | 30:033048611c01 | 492 | |
wim | 30:033048611c01 | 493 | case LCD24x2: |
wim | 30:033048611c01 | 494 | _writeCommand(0x2A); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode, G=1 VGen on |
wim | 29:a3663151aa65 | 495 | //Note: 4 bit mode is ignored for I2C mode |
wim | 30:033048611c01 | 496 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 497 | |
wim | 30:033048611c01 | 498 | default: |
wim | 30:033048611c01 | 499 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 30:033048611c01 | 500 | break; |
wim | 30:033048611c01 | 501 | |
wim | 29:a3663151aa65 | 502 | } // switch type |
wim | 29:a3663151aa65 | 503 | |
wim | 30:033048611c01 | 504 | break; // case PCF2116_3V3 Controller |
wim | 29:a3663151aa65 | 505 | |
wim | 29:a3663151aa65 | 506 | // case PCF21XX_5V: |
wim | 30:033048611c01 | 507 | // PCF21XX controller: No Voltage generator for VLCD. VDD=5V |
wim | 30:033048611c01 | 508 | //@TODO |
wim | 29:a3663151aa65 | 509 | |
wim | 19:c747b9e2e7b8 | 510 | case WS0010: |
wim | 19:c747b9e2e7b8 | 511 | // WS0010 OLED controller: Initialise DC/DC Voltage converter for LEDs |
wim | 30:033048611c01 | 512 | // Note1: Identical to RS0010 |
wim | 30:033048611c01 | 513 | // Note2: supports 1 or 2 lines (and 16x100 graphics) |
wim | 30:033048611c01 | 514 | // supports 4 fonts (English/Japanese (default), Western European-I, English/Russian, Western European-II) |
wim | 19:c747b9e2e7b8 | 515 | // Cursor/Disp shift set 0001 SC RL 0 0 |
wim | 19:c747b9e2e7b8 | 516 | // |
wim | 30:033048611c01 | 517 | // Mode and Power set 0001 GC PWR 1 1 |
wim | 19:c747b9e2e7b8 | 518 | // GC = 0 (Graph Mode=1, Char Mode=0) |
wim | 30:033048611c01 | 519 | // PWR = 1 (DC/DC On/Off) |
wim | 30:033048611c01 | 520 | |
wim | 30:033048611c01 | 521 | //@Todo: This may be needed to enable a warm reboot |
wim | 25:6162b31128c9 | 522 | //_writeCommand(0x13); // DC/DC off |
wim | 30:033048611c01 | 523 | //wait_ms(10); // Wait 10ms to ensure powered down |
wim | 28:30fa94f7341c | 524 | _writeCommand(0x17); // DC/DC on |
wim | 30:033048611c01 | 525 | wait_ms(10); // Wait 10ms to ensure powered up |
wim | 29:a3663151aa65 | 526 | |
wim | 29:a3663151aa65 | 527 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 528 | switch (_type) { |
wim | 29:a3663151aa65 | 529 | case LCD8x1: //8x1 is a regular 1 line display |
wim | 29:a3663151aa65 | 530 | case LCD8x2B: //8x2B is a special case of 16x1 |
wim | 29:a3663151aa65 | 531 | // case LCD12x1: |
wim | 29:a3663151aa65 | 532 | case LCD16x1: |
wim | 30:033048611c01 | 533 | case LCD24x1: |
wim | 30:033048611c01 | 534 | _writeCommand(0x20); // Function set 001 DL N F FT1 FT0 |
wim | 30:033048611c01 | 535 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 536 | // N=0 (1 line) |
wim | 30:033048611c01 | 537 | // F=0 (5x7 dots font) |
wim | 30:033048611c01 | 538 | // FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2 |
wim | 30:033048611c01 | 539 | break; |
wim | 30:033048611c01 | 540 | |
wim | 30:033048611c01 | 541 | case LCD12x3D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 542 | case LCD12x3D1: // Special mode for PCF2116 |
wim | 30:033048611c01 | 543 | case LCD12x4D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 544 | case LCD24x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 545 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 29:a3663151aa65 | 546 | break; |
wim | 29:a3663151aa65 | 547 | |
wim | 29:a3663151aa65 | 548 | default: |
wim | 30:033048611c01 | 549 | // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4) |
wim | 30:033048611c01 | 550 | _writeCommand(0x28); // Function set 001 DL N F FT1 FT0 |
wim | 30:033048611c01 | 551 | // DL=0 (4 bits bus) |
wim | 30:033048611c01 | 552 | // N=1 (2 lines) |
wim | 30:033048611c01 | 553 | // F=0 (5x7 dots font) |
wim | 30:033048611c01 | 554 | // FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2 |
wim | 30:033048611c01 | 555 | |
wim | 30:033048611c01 | 556 | |
wim | 29:a3663151aa65 | 557 | break; |
wim | 29:a3663151aa65 | 558 | } // switch type |
wim | 29:a3663151aa65 | 559 | |
wim | 29:a3663151aa65 | 560 | break; // case WS0100 Controller |
wim | 29:a3663151aa65 | 561 | |
wim | 19:c747b9e2e7b8 | 562 | default: |
wim | 29:a3663151aa65 | 563 | // Devices fully compatible to HD44780 that do not use any DC/DC Voltage converters but external VLCD |
wim | 10:dd9b3a696acd | 564 | |
wim | 29:a3663151aa65 | 565 | // Initialise Display configuration |
wim | 29:a3663151aa65 | 566 | switch (_type) { |
wim | 29:a3663151aa65 | 567 | case LCD8x1: //8x1 is a regular 1 line display |
wim | 29:a3663151aa65 | 568 | case LCD8x2B: //8x2B is a special case of 16x1 |
wim | 29:a3663151aa65 | 569 | // case LCD12x1: |
wim | 29:a3663151aa65 | 570 | case LCD16x1: |
wim | 30:033048611c01 | 571 | // case LCD20x1: |
wim | 29:a3663151aa65 | 572 | case LCD24x1: |
wim | 30:033048611c01 | 573 | // case LCD40x1: |
wim | 29:a3663151aa65 | 574 | _writeCommand(0x20); // Function set 001 DL N F - - |
wim | 29:a3663151aa65 | 575 | // DL=0 (4 bits bus) |
wim | 29:a3663151aa65 | 576 | // N=0 (1 line) |
wim | 29:a3663151aa65 | 577 | // F=0 (5x7 dots font) |
wim | 29:a3663151aa65 | 578 | break; |
wim | 29:a3663151aa65 | 579 | |
wim | 30:033048611c01 | 580 | |
wim | 30:033048611c01 | 581 | // case LCD12x3D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 582 | // case LCD12x3D1: // Special mode for PCF2116 |
wim | 30:033048611c01 | 583 | // case LCD12x4D: // Special mode for PCF2116 |
wim | 30:033048611c01 | 584 | // case LCD24x3D: // Special mode for KS0078 |
wim | 30:033048611c01 | 585 | case LCD24x4D: // Special mode for KS0078 |
wim | 30:033048611c01 | 586 | error("Error: LCD Controller type does not support this Display type\n\r"); |
wim | 30:033048611c01 | 587 | break; |
wim | 30:033048611c01 | 588 | |
wim | 30:033048611c01 | 589 | // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4) |
wim | 29:a3663151aa65 | 590 | default: |
wim | 29:a3663151aa65 | 591 | _writeCommand(0x28); // Function set 001 DL N F - - |
wim | 29:a3663151aa65 | 592 | // DL=0 (4 bits bus) |
wim | 29:a3663151aa65 | 593 | // Note: 4 bit mode is ignored for native SPI and I2C devices |
wim | 29:a3663151aa65 | 594 | // N=1 (2 lines) |
wim | 29:a3663151aa65 | 595 | // F=0 (5x7 dots font, only option for 2 line display) |
wim | 29:a3663151aa65 | 596 | // - (Don't care) |
wim | 29:a3663151aa65 | 597 | |
wim | 29:a3663151aa65 | 598 | break; |
wim | 29:a3663151aa65 | 599 | } // switch type |
wim | 10:dd9b3a696acd | 600 | |
wim | 29:a3663151aa65 | 601 | break; // case default Controller |
wim | 29:a3663151aa65 | 602 | |
wim | 29:a3663151aa65 | 603 | } // switch Controller specific initialisations |
wim | 29:a3663151aa65 | 604 | |
wim | 10:dd9b3a696acd | 605 | |
wim | 30:033048611c01 | 606 | // Controller general initialisations |
wim | 28:30fa94f7341c | 607 | _writeCommand(0x01); // cls, and set cursor to 0 |
wim | 28:30fa94f7341c | 608 | wait_ms(10); // The CLS command takes 1.64 ms. |
wim | 28:30fa94f7341c | 609 | // Since we are not using the Busy flag, Lets be safe and take 10 ms |
wim | 28:30fa94f7341c | 610 | |
wim | 28:30fa94f7341c | 611 | _writeCommand(0x02); // Return Home |
wim | 28:30fa94f7341c | 612 | // Cursor Home, DDRAM Address to Origin |
wim | 28:30fa94f7341c | 613 | |
wim | 28:30fa94f7341c | 614 | _writeCommand(0x06); // Entry Mode 0000 0 1 I/D S |
wim | 13:24506ba22480 | 615 | // Cursor Direction and Display Shift |
wim | 28:30fa94f7341c | 616 | // I/D=1 (Cur incr) |
wim | 28:30fa94f7341c | 617 | // S=0 (No display shift) |
wim | 10:dd9b3a696acd | 618 | |
wim | 29:a3663151aa65 | 619 | _writeCommand(0x14); // Cursor or Display shift 0001 S/C R/L x x |
wim | 29:a3663151aa65 | 620 | // S/C=0 Cursor moves |
wim | 29:a3663151aa65 | 621 | // R/L=1 Right |
wim | 29:a3663151aa65 | 622 | // |
wim | 29:a3663151aa65 | 623 | |
wim | 13:24506ba22480 | 624 | // _writeCommand(0x0C); // Display Ctrl 0000 1 D C B |
wim | 17:652ab113bc2e | 625 | // // Display On, Cursor Off, Blink Off |
wim | 21:9eb628d9e164 | 626 | setCursor(CurOff_BlkOff); |
wim | 21:9eb628d9e164 | 627 | setMode(DispOn); |
simon | 1:ac48b187213c | 628 | } |
simon | 1:ac48b187213c | 629 | |
wim | 8:03116f75b66e | 630 | |
wim | 21:9eb628d9e164 | 631 | /** Clear the screen, Cursor home. |
wim | 21:9eb628d9e164 | 632 | */ |
wim | 21:9eb628d9e164 | 633 | void TextLCD_Base::cls() { |
wim | 15:b70ebfffb258 | 634 | |
wim | 15:b70ebfffb258 | 635 | // Select and configure second LCD controller when needed |
wim | 15:b70ebfffb258 | 636 | if(_type==LCD40x4) { |
wim | 21:9eb628d9e164 | 637 | _ctrl_idx=_LCDCtrl_1; // Select 2nd controller |
wim | 15:b70ebfffb258 | 638 | |
wim | 15:b70ebfffb258 | 639 | // Second LCD controller Cursor always Off |
wim | 21:9eb628d9e164 | 640 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 15:b70ebfffb258 | 641 | |
wim | 15:b70ebfffb258 | 642 | // Second LCD controller Clearscreen |
wim | 27:22d5086f6ba6 | 643 | _writeCommand(0x01); // cls, and set cursor to 0 |
wim | 29:a3663151aa65 | 644 | wait_ms(10); // The CLS command takes 1.64 ms. |
wim | 29:a3663151aa65 | 645 | // Since we are not using the Busy flag, Lets be safe and take 10 ms |
wim | 15:b70ebfffb258 | 646 | |
wim | 21:9eb628d9e164 | 647 | _ctrl_idx=_LCDCtrl_0; // Select primary controller |
wim | 15:b70ebfffb258 | 648 | } |
wim | 15:b70ebfffb258 | 649 | |
wim | 15:b70ebfffb258 | 650 | // Primary LCD controller Clearscreen |
wim | 27:22d5086f6ba6 | 651 | _writeCommand(0x01); // cls, and set cursor to 0 |
wim | 29:a3663151aa65 | 652 | wait_ms(10); // The CLS command takes 1.64 ms. |
wim | 29:a3663151aa65 | 653 | // Since we are not using the Busy flag, Lets be safe and take 10 ms |
wim | 15:b70ebfffb258 | 654 | |
wim | 15:b70ebfffb258 | 655 | // Restore cursormode on primary LCD controller when needed |
wim | 15:b70ebfffb258 | 656 | if(_type==LCD40x4) { |
wim | 17:652ab113bc2e | 657 | _setCursorAndDisplayMode(_currentMode,_currentCursor); |
wim | 15:b70ebfffb258 | 658 | } |
wim | 15:b70ebfffb258 | 659 | |
wim | 29:a3663151aa65 | 660 | setAddress(0, 0); // Reset Cursor location |
wim | 30:033048611c01 | 661 | // Note: this is needed because some displays (eg PCF21XX) don't use line 0 in the '3 Line' mode. |
simon | 1:ac48b187213c | 662 | } |
simon | 1:ac48b187213c | 663 | |
wim | 29:a3663151aa65 | 664 | /** Locate cursor to a screen column and row |
wim | 29:a3663151aa65 | 665 | * |
wim | 29:a3663151aa65 | 666 | * @param column The horizontal position from the left, indexed from 0 |
wim | 29:a3663151aa65 | 667 | * @param row The vertical position from the top, indexed from 0 |
wim | 29:a3663151aa65 | 668 | */ |
wim | 21:9eb628d9e164 | 669 | void TextLCD_Base::locate(int column, int row) { |
wim | 15:b70ebfffb258 | 670 | |
wim | 15:b70ebfffb258 | 671 | // setAddress() does all the heavy lifting: |
wim | 15:b70ebfffb258 | 672 | // check column and row sanity, |
wim | 15:b70ebfffb258 | 673 | // switch controllers for LCD40x4 if needed |
wim | 15:b70ebfffb258 | 674 | // switch cursor for LCD40x4 if needed |
wim | 15:b70ebfffb258 | 675 | // set the new memory address to show cursor at correct location |
wim | 15:b70ebfffb258 | 676 | setAddress(column, row); |
wim | 15:b70ebfffb258 | 677 | |
wim | 15:b70ebfffb258 | 678 | } |
wim | 30:033048611c01 | 679 | |
wim | 15:b70ebfffb258 | 680 | |
wim | 21:9eb628d9e164 | 681 | /** Write a single character (Stream implementation) |
wim | 21:9eb628d9e164 | 682 | */ |
wim | 21:9eb628d9e164 | 683 | int TextLCD_Base::_putc(int value) { |
wim | 15:b70ebfffb258 | 684 | int addr; |
wim | 15:b70ebfffb258 | 685 | |
wim | 15:b70ebfffb258 | 686 | if (value == '\n') { |
wim | 15:b70ebfffb258 | 687 | //No character to write |
wim | 15:b70ebfffb258 | 688 | |
wim | 15:b70ebfffb258 | 689 | //Update Cursor |
wim | 15:b70ebfffb258 | 690 | _column = 0; |
wim | 15:b70ebfffb258 | 691 | _row++; |
wim | 15:b70ebfffb258 | 692 | if (_row >= rows()) { |
wim | 15:b70ebfffb258 | 693 | _row = 0; |
wim | 15:b70ebfffb258 | 694 | } |
wim | 15:b70ebfffb258 | 695 | } |
wim | 15:b70ebfffb258 | 696 | else { |
wim | 15:b70ebfffb258 | 697 | //Character to write |
wim | 15:b70ebfffb258 | 698 | _writeData(value); |
wim | 15:b70ebfffb258 | 699 | |
wim | 15:b70ebfffb258 | 700 | //Update Cursor |
wim | 15:b70ebfffb258 | 701 | _column++; |
wim | 15:b70ebfffb258 | 702 | if (_column >= columns()) { |
wim | 15:b70ebfffb258 | 703 | _column = 0; |
wim | 15:b70ebfffb258 | 704 | _row++; |
wim | 15:b70ebfffb258 | 705 | if (_row >= rows()) { |
wim | 15:b70ebfffb258 | 706 | _row = 0; |
wim | 15:b70ebfffb258 | 707 | } |
wim | 15:b70ebfffb258 | 708 | } |
wim | 15:b70ebfffb258 | 709 | } //else |
wim | 15:b70ebfffb258 | 710 | |
wim | 15:b70ebfffb258 | 711 | //Set next memoryaddress, make sure cursor blinks at next location |
wim | 15:b70ebfffb258 | 712 | addr = getAddress(_column, _row); |
wim | 15:b70ebfffb258 | 713 | _writeCommand(0x80 | addr); |
wim | 15:b70ebfffb258 | 714 | |
wim | 15:b70ebfffb258 | 715 | return value; |
wim | 15:b70ebfffb258 | 716 | } |
wim | 15:b70ebfffb258 | 717 | |
wim | 15:b70ebfffb258 | 718 | |
wim | 16:c276b75e6585 | 719 | // get a single character (Stream implementation) |
wim | 21:9eb628d9e164 | 720 | int TextLCD_Base::_getc() { |
simon | 1:ac48b187213c | 721 | return -1; |
simon | 1:ac48b187213c | 722 | } |
simon | 1:ac48b187213c | 723 | |
wim | 14:0c32b66b14b8 | 724 | |
wim | 17:652ab113bc2e | 725 | // Write a nibble using the 4-bit interface |
wim | 21:9eb628d9e164 | 726 | void TextLCD_Base::_writeNibble(int value) { |
wim | 17:652ab113bc2e | 727 | |
wim | 17:652ab113bc2e | 728 | // Enable is Low |
wim | 21:9eb628d9e164 | 729 | this->_setEnable(true); |
wim | 21:9eb628d9e164 | 730 | this->_setData(value & 0x0F); // Low nibble |
wim | 17:652ab113bc2e | 731 | wait_us(1); // Data setup time |
wim | 21:9eb628d9e164 | 732 | this->_setEnable(false); |
wim | 17:652ab113bc2e | 733 | wait_us(1); // Datahold time |
wim | 17:652ab113bc2e | 734 | |
wim | 17:652ab113bc2e | 735 | // Enable is Low |
wim | 17:652ab113bc2e | 736 | } |
wim | 17:652ab113bc2e | 737 | |
wim | 17:652ab113bc2e | 738 | |
wim | 16:c276b75e6585 | 739 | // Write a byte using the 4-bit interface |
wim | 21:9eb628d9e164 | 740 | void TextLCD_Base::_writeByte(int value) { |
wim | 15:b70ebfffb258 | 741 | |
wim | 15:b70ebfffb258 | 742 | // Enable is Low |
wim | 21:9eb628d9e164 | 743 | this->_setEnable(true); |
wim | 21:9eb628d9e164 | 744 | this->_setData(value >> 4); // High nibble |
wim | 15:b70ebfffb258 | 745 | wait_us(1); // Data setup time |
wim | 21:9eb628d9e164 | 746 | this->_setEnable(false); |
wim | 15:b70ebfffb258 | 747 | wait_us(1); // Data hold time |
wim | 15:b70ebfffb258 | 748 | |
wim | 21:9eb628d9e164 | 749 | this->_setEnable(true); |
wim | 21:9eb628d9e164 | 750 | this->_setData(value >> 0); // Low nibble |
wim | 15:b70ebfffb258 | 751 | wait_us(1); // Data setup time |
wim | 21:9eb628d9e164 | 752 | this->_setEnable(false); |
wim | 15:b70ebfffb258 | 753 | wait_us(1); // Datahold time |
wim | 15:b70ebfffb258 | 754 | |
wim | 15:b70ebfffb258 | 755 | // Enable is Low |
wim | 15:b70ebfffb258 | 756 | |
simon | 1:ac48b187213c | 757 | } |
simon | 1:ac48b187213c | 758 | |
wim | 21:9eb628d9e164 | 759 | // Write a command byte to the LCD controller |
wim | 21:9eb628d9e164 | 760 | void TextLCD_Base::_writeCommand(int command) { |
wim | 15:b70ebfffb258 | 761 | |
wim | 21:9eb628d9e164 | 762 | this->_setRS(false); |
wim | 16:c276b75e6585 | 763 | wait_us(1); // Data setup time for RS |
wim | 15:b70ebfffb258 | 764 | |
wim | 21:9eb628d9e164 | 765 | this->_writeByte(command); |
wim | 15:b70ebfffb258 | 766 | wait_us(40); // most instructions take 40us |
simon | 1:ac48b187213c | 767 | } |
simon | 1:ac48b187213c | 768 | |
wim | 21:9eb628d9e164 | 769 | // Write a data byte to the LCD controller |
wim | 21:9eb628d9e164 | 770 | void TextLCD_Base::_writeData(int data) { |
wim | 15:b70ebfffb258 | 771 | |
wim | 21:9eb628d9e164 | 772 | this->_setRS(true); |
wim | 16:c276b75e6585 | 773 | wait_us(1); // Data setup time for RS |
wim | 15:b70ebfffb258 | 774 | |
wim | 21:9eb628d9e164 | 775 | this->_writeByte(data); |
wim | 15:b70ebfffb258 | 776 | wait_us(40); // data writes take 40us |
simon | 1:ac48b187213c | 777 | } |
simon | 1:ac48b187213c | 778 | |
wim | 8:03116f75b66e | 779 | |
wim | 8:03116f75b66e | 780 | #if (0) |
wim | 16:c276b75e6585 | 781 | // This is the original _address() method. |
wim | 8:03116f75b66e | 782 | // It is confusing since it returns the memoryaddress or-ed with the set memorycommand 0x80. |
wim | 8:03116f75b66e | 783 | // Left it in here for compatibility with older code. New applications should use getAddress() instead. |
wim | 8:03116f75b66e | 784 | // |
wim | 21:9eb628d9e164 | 785 | int TextLCD_Base::_address(int column, int row) { |
simon | 1:ac48b187213c | 786 | switch (_type) { |
simon | 1:ac48b187213c | 787 | case LCD20x4: |
simon | 1:ac48b187213c | 788 | switch (row) { |
simon | 1:ac48b187213c | 789 | case 0: |
simon | 1:ac48b187213c | 790 | return 0x80 + column; |
simon | 1:ac48b187213c | 791 | case 1: |
simon | 1:ac48b187213c | 792 | return 0xc0 + column; |
simon | 1:ac48b187213c | 793 | case 2: |
simon | 1:ac48b187213c | 794 | return 0x94 + column; |
simon | 1:ac48b187213c | 795 | case 3: |
simon | 1:ac48b187213c | 796 | return 0xd4 + column; |
simon | 1:ac48b187213c | 797 | } |
simon | 1:ac48b187213c | 798 | case LCD16x2B: |
simon | 4:bf5b706f8d32 | 799 | return 0x80 + (row * 40) + column; |
simon | 1:ac48b187213c | 800 | case LCD16x2: |
simon | 1:ac48b187213c | 801 | case LCD20x2: |
simon | 1:ac48b187213c | 802 | default: |
simon | 4:bf5b706f8d32 | 803 | return 0x80 + (row * 0x40) + column; |
simon | 1:ac48b187213c | 804 | } |
simon | 1:ac48b187213c | 805 | } |
wim | 8:03116f75b66e | 806 | #endif |
wim | 8:03116f75b66e | 807 | |
wim | 8:03116f75b66e | 808 | |
wim | 16:c276b75e6585 | 809 | // This replaces the original _address() method. |
wim | 8:03116f75b66e | 810 | // Left it in here for compatibility with older code. New applications should use getAddress() instead. |
wim | 21:9eb628d9e164 | 811 | int TextLCD_Base::_address(int column, int row) { |
wim | 8:03116f75b66e | 812 | return 0x80 | getAddress(column, row); |
wim | 8:03116f75b66e | 813 | } |
wim | 8:03116f75b66e | 814 | |
wim | 30:033048611c01 | 815 | #if(0) |
wim | 8:03116f75b66e | 816 | // This is new method to return the memory address based on row, column and displaytype. |
wim | 8:03116f75b66e | 817 | // |
wim | 29:a3663151aa65 | 818 | /** Return the memoryaddress of screen column and row location |
wim | 29:a3663151aa65 | 819 | * |
wim | 29:a3663151aa65 | 820 | * @param column The horizontal position from the left, indexed from 0 |
wim | 29:a3663151aa65 | 821 | * @param row The vertical position from the top, indexed from 0 |
wim | 29:a3663151aa65 | 822 | * @param return The memoryaddress of screen column and row location |
wim | 30:033048611c01 | 823 | * |
wim | 30:033048611c01 | 824 | * Note: some configurations are commented out because they have not yet been tested due to lack of hardware |
wim | 29:a3663151aa65 | 825 | */ |
wim | 21:9eb628d9e164 | 826 | int TextLCD_Base::getAddress(int column, int row) { |
wim | 8:03116f75b66e | 827 | |
wim | 8:03116f75b66e | 828 | switch (_type) { |
wim | 8:03116f75b66e | 829 | case LCD8x1: |
wim | 30:033048611c01 | 830 | // case LCD12x1: |
wim | 30:033048611c01 | 831 | // case LCD16x1B: |
wim | 30:033048611c01 | 832 | // case LCD20x1: |
wim | 30:033048611c01 | 833 | case LCD24x1: |
wim | 30:033048611c01 | 834 | // case LCD40x1: |
wim | 8:03116f75b66e | 835 | return 0x00 + column; |
wim | 18:bd65dc10f27f | 836 | |
wim | 29:a3663151aa65 | 837 | case LCD16x1: |
wim | 29:a3663151aa65 | 838 | // LCD16x1 is a special layout of LCD8x2 |
wim | 29:a3663151aa65 | 839 | if (column<8) |
wim | 29:a3663151aa65 | 840 | return 0x00 + column; |
wim | 29:a3663151aa65 | 841 | else |
wim | 29:a3663151aa65 | 842 | return 0x40 + (column - 8); |
wim | 29:a3663151aa65 | 843 | |
wim | 30:033048611c01 | 844 | case LCD8x2D: |
wim | 18:bd65dc10f27f | 845 | // LCD8x2B is a special layout of LCD16x1 |
wim | 18:bd65dc10f27f | 846 | if (row==0) |
wim | 18:bd65dc10f27f | 847 | return 0x00 + column; |
wim | 18:bd65dc10f27f | 848 | else |
wim | 18:bd65dc10f27f | 849 | return 0x08 + column; |
wim | 18:bd65dc10f27f | 850 | |
wim | 29:a3663151aa65 | 851 | case LCD8x2: |
wim | 29:a3663151aa65 | 852 | case LCD12x2: |
wim | 29:a3663151aa65 | 853 | case LCD16x2: |
wim | 29:a3663151aa65 | 854 | case LCD20x2: |
wim | 29:a3663151aa65 | 855 | case LCD24x2: |
wim | 29:a3663151aa65 | 856 | case LCD40x2: |
wim | 29:a3663151aa65 | 857 | return 0x00 + (row * 0x40) + column; |
wim | 13:24506ba22480 | 858 | |
wim | 29:a3663151aa65 | 859 | // Not sure about this one, seems wrong. |
wim | 29:a3663151aa65 | 860 | // Left in for compatibility with original library |
wim | 29:a3663151aa65 | 861 | case LCD16x2B: |
wim | 29:a3663151aa65 | 862 | return 0x00 + (row * 40) + column; |
wim | 29:a3663151aa65 | 863 | |
wim | 29:a3663151aa65 | 864 | |
wim | 28:30fa94f7341c | 865 | // Special mode for ST7036 |
wim | 28:30fa94f7341c | 866 | // case LCD16x3: |
wim | 28:30fa94f7341c | 867 | |
wim | 29:a3663151aa65 | 868 | // Special mode for PCF2116 |
wim | 29:a3663151aa65 | 869 | case LCD12x3B: |
wim | 30:033048611c01 | 870 | //Display bottom three rows of four |
wim | 29:a3663151aa65 | 871 | switch (row) { |
wim | 29:a3663151aa65 | 872 | case 0: |
wim | 29:a3663151aa65 | 873 | return 0x20 + column; |
wim | 29:a3663151aa65 | 874 | case 1: |
wim | 29:a3663151aa65 | 875 | return 0x40 + column; |
wim | 29:a3663151aa65 | 876 | case 2: |
wim | 29:a3663151aa65 | 877 | return 0x60 + column; |
wim | 29:a3663151aa65 | 878 | } |
wim | 29:a3663151aa65 | 879 | |
wim | 30:033048611c01 | 880 | #if(0) |
wim | 30:033048611c01 | 881 | case LCD12x3C: |
wim | 30:033048611c01 | 882 | //Display top three rows of four |
wim | 30:033048611c01 | 883 | switch (row) { |
wim | 30:033048611c01 | 884 | case 0: |
wim | 30:033048611c01 | 885 | return 0x00 + column; |
wim | 30:033048611c01 | 886 | case 1: |
wim | 30:033048611c01 | 887 | return 0x20 + column; |
wim | 30:033048611c01 | 888 | case 2: |
wim | 30:033048611c01 | 889 | return 0x40 + column; |
wim | 30:033048611c01 | 890 | } |
wim | 30:033048611c01 | 891 | #endif |
wim | 30:033048611c01 | 892 | |
wim | 29:a3663151aa65 | 893 | case LCD12x4: |
wim | 28:30fa94f7341c | 894 | switch (row) { |
wim | 28:30fa94f7341c | 895 | case 0: |
wim | 28:30fa94f7341c | 896 | return 0x00 + column; |
wim | 28:30fa94f7341c | 897 | case 1: |
wim | 29:a3663151aa65 | 898 | return 0x40 + column; |
wim | 28:30fa94f7341c | 899 | case 2: |
wim | 29:a3663151aa65 | 900 | return 0x0C + column; |
wim | 29:a3663151aa65 | 901 | case 3: |
wim | 29:a3663151aa65 | 902 | return 0x4C + column; |
wim | 28:30fa94f7341c | 903 | } |
wim | 28:30fa94f7341c | 904 | |
wim | 28:30fa94f7341c | 905 | // Special mode for PCF2116 (and KS0078) |
wim | 28:30fa94f7341c | 906 | case LCD12x4B: |
wim | 28:30fa94f7341c | 907 | switch (row) { |
wim | 28:30fa94f7341c | 908 | case 0: |
wim | 28:30fa94f7341c | 909 | return 0x00 + column; |
wim | 28:30fa94f7341c | 910 | case 1: |
wim | 28:30fa94f7341c | 911 | return 0x20 + column; |
wim | 28:30fa94f7341c | 912 | case 2: |
wim | 28:30fa94f7341c | 913 | return 0x40 + column; |
wim | 28:30fa94f7341c | 914 | case 3: |
wim | 28:30fa94f7341c | 915 | return 0x60 + column; |
wim | 28:30fa94f7341c | 916 | } |
wim | 28:30fa94f7341c | 917 | |
wim | 8:03116f75b66e | 918 | case LCD16x4: |
wim | 8:03116f75b66e | 919 | switch (row) { |
wim | 8:03116f75b66e | 920 | case 0: |
wim | 8:03116f75b66e | 921 | return 0x00 + column; |
wim | 8:03116f75b66e | 922 | case 1: |
wim | 8:03116f75b66e | 923 | return 0x40 + column; |
wim | 8:03116f75b66e | 924 | case 2: |
wim | 8:03116f75b66e | 925 | return 0x10 + column; |
wim | 8:03116f75b66e | 926 | case 3: |
wim | 8:03116f75b66e | 927 | return 0x50 + column; |
wim | 8:03116f75b66e | 928 | } |
wim | 8:03116f75b66e | 929 | |
wim | 8:03116f75b66e | 930 | case LCD20x4: |
wim | 8:03116f75b66e | 931 | switch (row) { |
wim | 8:03116f75b66e | 932 | case 0: |
wim | 8:03116f75b66e | 933 | return 0x00 + column; |
wim | 8:03116f75b66e | 934 | case 1: |
wim | 8:03116f75b66e | 935 | return 0x40 + column; |
wim | 8:03116f75b66e | 936 | case 2: |
wim | 8:03116f75b66e | 937 | return 0x14 + column; |
wim | 8:03116f75b66e | 938 | case 3: |
wim | 8:03116f75b66e | 939 | return 0x54 + column; |
wim | 8:03116f75b66e | 940 | } |
wim | 8:03116f75b66e | 941 | |
wim | 10:dd9b3a696acd | 942 | // Special mode for KS0078 |
wim | 29:a3663151aa65 | 943 | case LCD24x4B: |
wim | 10:dd9b3a696acd | 944 | switch (row) { |
wim | 10:dd9b3a696acd | 945 | case 0: |
wim | 10:dd9b3a696acd | 946 | return 0x00 + column; |
wim | 10:dd9b3a696acd | 947 | case 1: |
wim | 10:dd9b3a696acd | 948 | return 0x20 + column; |
wim | 10:dd9b3a696acd | 949 | case 2: |
wim | 10:dd9b3a696acd | 950 | return 0x40 + column; |
wim | 10:dd9b3a696acd | 951 | case 3: |
wim | 10:dd9b3a696acd | 952 | return 0x60 + column; |
wim | 10:dd9b3a696acd | 953 | } |
wim | 10:dd9b3a696acd | 954 | |
wim | 15:b70ebfffb258 | 955 | case LCD40x4: |
wim | 15:b70ebfffb258 | 956 | // LCD40x4 is a special case since it has 2 controllers |
wim | 15:b70ebfffb258 | 957 | // Each controller is configured as 40x2 |
wim | 15:b70ebfffb258 | 958 | if (row<2) { |
wim | 15:b70ebfffb258 | 959 | // Test to see if we need to switch between controllers |
wim | 19:c747b9e2e7b8 | 960 | if (_ctrl_idx != _LCDCtrl_0) { |
wim | 17:652ab113bc2e | 961 | |
wim | 15:b70ebfffb258 | 962 | // Second LCD controller Cursor Off |
wim | 21:9eb628d9e164 | 963 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 15:b70ebfffb258 | 964 | |
wim | 15:b70ebfffb258 | 965 | // Select primary controller |
wim | 19:c747b9e2e7b8 | 966 | _ctrl_idx = _LCDCtrl_0; |
wim | 15:b70ebfffb258 | 967 | |
wim | 15:b70ebfffb258 | 968 | // Restore cursormode on primary LCD controller |
wim | 17:652ab113bc2e | 969 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 15:b70ebfffb258 | 970 | } |
wim | 15:b70ebfffb258 | 971 | |
wim | 15:b70ebfffb258 | 972 | return 0x00 + (row * 0x40) + column; |
wim | 15:b70ebfffb258 | 973 | } |
wim | 15:b70ebfffb258 | 974 | else { |
wim | 15:b70ebfffb258 | 975 | |
wim | 15:b70ebfffb258 | 976 | // Test to see if we need to switch between controllers |
wim | 19:c747b9e2e7b8 | 977 | if (_ctrl_idx != _LCDCtrl_1) { |
wim | 15:b70ebfffb258 | 978 | // Primary LCD controller Cursor Off |
wim | 21:9eb628d9e164 | 979 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 15:b70ebfffb258 | 980 | |
wim | 15:b70ebfffb258 | 981 | // Select secondary controller |
wim | 19:c747b9e2e7b8 | 982 | _ctrl_idx = _LCDCtrl_1; |
wim | 15:b70ebfffb258 | 983 | |
wim | 15:b70ebfffb258 | 984 | // Restore cursormode on secondary LCD controller |
wim | 17:652ab113bc2e | 985 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 15:b70ebfffb258 | 986 | } |
wim | 15:b70ebfffb258 | 987 | |
wim | 15:b70ebfffb258 | 988 | return 0x00 + ((row-2) * 0x40) + column; |
wim | 15:b70ebfffb258 | 989 | } |
wim | 8:03116f75b66e | 990 | |
wim | 8:03116f75b66e | 991 | // Should never get here. |
wim | 8:03116f75b66e | 992 | default: |
wim | 8:03116f75b66e | 993 | return 0x00; |
wim | 8:03116f75b66e | 994 | } |
wim | 8:03116f75b66e | 995 | } |
wim | 8:03116f75b66e | 996 | |
wim | 30:033048611c01 | 997 | #else |
wim | 30:033048611c01 | 998 | |
wim | 30:033048611c01 | 999 | //Test of Addressing Mode encoded in LCDType |
wim | 30:033048611c01 | 1000 | |
wim | 30:033048611c01 | 1001 | // This is new method to return the memory address based on row, column and displaytype. |
wim | 30:033048611c01 | 1002 | // |
wim | 30:033048611c01 | 1003 | /** Return the memoryaddress of screen column and row location |
wim | 30:033048611c01 | 1004 | * |
wim | 30:033048611c01 | 1005 | * @param column The horizontal position from the left, indexed from 0 |
wim | 30:033048611c01 | 1006 | * @param row The vertical position from the top, indexed from 0 |
wim | 30:033048611c01 | 1007 | * @param return The memoryaddress of screen column and row location |
wim | 30:033048611c01 | 1008 | * |
wim | 30:033048611c01 | 1009 | * Note: some configurations are commented out because they have not yet been tested due to lack of hardware |
wim | 30:033048611c01 | 1010 | */ |
wim | 30:033048611c01 | 1011 | int TextLCD_Base::getAddress(int column, int row) { |
wim | 30:033048611c01 | 1012 | |
wim | 30:033048611c01 | 1013 | switch (_addr_mode) { |
wim | 30:033048611c01 | 1014 | |
wim | 30:033048611c01 | 1015 | case LCD_T_A: |
wim | 30:033048611c01 | 1016 | //Default addressing mode for 1, 2 and 4 rows (except 40x4) |
wim | 30:033048611c01 | 1017 | //The two available rows are split and stacked on top of eachother. Addressing for 3rd and 4th line continues where lines 1 and 2 were split. |
wim | 30:033048611c01 | 1018 | //Displays top rows when less than four are used. |
wim | 30:033048611c01 | 1019 | switch (row) { |
wim | 30:033048611c01 | 1020 | case 0: |
wim | 30:033048611c01 | 1021 | return 0x00 + column; |
wim | 30:033048611c01 | 1022 | case 1: |
wim | 30:033048611c01 | 1023 | return 0x40 + column; |
wim | 30:033048611c01 | 1024 | case 2: |
wim | 30:033048611c01 | 1025 | return 0x00 + _nr_cols + column; |
wim | 30:033048611c01 | 1026 | case 3: |
wim | 30:033048611c01 | 1027 | return 0x40 + _nr_cols + column; |
wim | 30:033048611c01 | 1028 | // Should never get here. |
wim | 30:033048611c01 | 1029 | default: |
wim | 30:033048611c01 | 1030 | return 0x00; |
wim | 30:033048611c01 | 1031 | } |
wim | 30:033048611c01 | 1032 | |
wim | 30:033048611c01 | 1033 | case LCD_T_B: |
wim | 30:033048611c01 | 1034 | // LCD8x2B is a special layout of LCD16x1 |
wim | 30:033048611c01 | 1035 | if (row==0) |
wim | 30:033048611c01 | 1036 | return 0x00 + column; |
wim | 30:033048611c01 | 1037 | else |
wim | 30:033048611c01 | 1038 | // return _nr_cols + column; |
wim | 30:033048611c01 | 1039 | return 0x08 + column; |
wim | 30:033048611c01 | 1040 | |
wim | 30:033048611c01 | 1041 | case LCD_T_C: |
wim | 30:033048611c01 | 1042 | // LCD16x1C is a special layout of LCD8x2 |
wim | 30:033048611c01 | 1043 | if (column<8) |
wim | 30:033048611c01 | 1044 | return 0x00 + column; |
wim | 30:033048611c01 | 1045 | else |
wim | 30:033048611c01 | 1046 | return 0x40 + (column - 8); |
wim | 30:033048611c01 | 1047 | |
wim | 30:033048611c01 | 1048 | // Not sure about this one, seems wrong. |
wim | 30:033048611c01 | 1049 | // Left in for compatibility with original library |
wim | 30:033048611c01 | 1050 | // case LCD16x2B: |
wim | 30:033048611c01 | 1051 | // return 0x00 + (row * 40) + column; |
wim | 30:033048611c01 | 1052 | |
wim | 30:033048611c01 | 1053 | |
wim | 30:033048611c01 | 1054 | case LCD_T_D: |
wim | 30:033048611c01 | 1055 | //Alternate addressing mode for 3 and 4 row displays (except 40x4). Used by PCF21XX, KS0078 |
wim | 30:033048611c01 | 1056 | //The 4 available rows start at a hardcoded address. |
wim | 30:033048611c01 | 1057 | //Displays top rows when less than four are used. |
wim | 30:033048611c01 | 1058 | switch (row) { |
wim | 30:033048611c01 | 1059 | case 0: |
wim | 30:033048611c01 | 1060 | return 0x00 + column; |
wim | 30:033048611c01 | 1061 | case 1: |
wim | 30:033048611c01 | 1062 | return 0x20 + column; |
wim | 30:033048611c01 | 1063 | case 2: |
wim | 30:033048611c01 | 1064 | return 0x40 + column; |
wim | 30:033048611c01 | 1065 | case 3: |
wim | 30:033048611c01 | 1066 | return 0x60 + column; |
wim | 30:033048611c01 | 1067 | // Should never get here. |
wim | 30:033048611c01 | 1068 | default: |
wim | 30:033048611c01 | 1069 | return 0x00; |
wim | 30:033048611c01 | 1070 | } |
wim | 30:033048611c01 | 1071 | |
wim | 30:033048611c01 | 1072 | case LCD_T_D1: |
wim | 30:033048611c01 | 1073 | //Alternate addressing mode for 3 row displays. Used by PCF21XX, KS0078 |
wim | 30:033048611c01 | 1074 | //The 4 available rows start at a hardcoded address. |
wim | 30:033048611c01 | 1075 | //Skips top row of 4 row display and starts display at row 1 |
wim | 30:033048611c01 | 1076 | switch (row) { |
wim | 30:033048611c01 | 1077 | case 0: |
wim | 30:033048611c01 | 1078 | return 0x20 + column; |
wim | 30:033048611c01 | 1079 | case 1: |
wim | 30:033048611c01 | 1080 | return 0x40 + column; |
wim | 30:033048611c01 | 1081 | case 2: |
wim | 30:033048611c01 | 1082 | return 0x60 + column; |
wim | 30:033048611c01 | 1083 | // Should never get here. |
wim | 30:033048611c01 | 1084 | default: |
wim | 30:033048611c01 | 1085 | return 0x00; |
wim | 30:033048611c01 | 1086 | } |
wim | 30:033048611c01 | 1087 | |
wim | 30:033048611c01 | 1088 | case LCD_T_E: |
wim | 30:033048611c01 | 1089 | // LCD40x4 is a special case since it has 2 controllers. |
wim | 30:033048611c01 | 1090 | // Each controller is configured as 40x2 (Type A) |
wim | 30:033048611c01 | 1091 | if (row<2) { |
wim | 30:033048611c01 | 1092 | // Test to see if we need to switch between controllers |
wim | 30:033048611c01 | 1093 | if (_ctrl_idx != _LCDCtrl_0) { |
wim | 30:033048611c01 | 1094 | |
wim | 30:033048611c01 | 1095 | // Second LCD controller Cursor Off |
wim | 30:033048611c01 | 1096 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 30:033048611c01 | 1097 | |
wim | 30:033048611c01 | 1098 | // Select primary controller |
wim | 30:033048611c01 | 1099 | _ctrl_idx = _LCDCtrl_0; |
wim | 30:033048611c01 | 1100 | |
wim | 30:033048611c01 | 1101 | // Restore cursormode on primary LCD controller |
wim | 30:033048611c01 | 1102 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 30:033048611c01 | 1103 | } |
wim | 30:033048611c01 | 1104 | |
wim | 30:033048611c01 | 1105 | return 0x00 + (row * 0x40) + column; |
wim | 30:033048611c01 | 1106 | } |
wim | 30:033048611c01 | 1107 | else { |
wim | 30:033048611c01 | 1108 | |
wim | 30:033048611c01 | 1109 | // Test to see if we need to switch between controllers |
wim | 30:033048611c01 | 1110 | if (_ctrl_idx != _LCDCtrl_1) { |
wim | 30:033048611c01 | 1111 | // Primary LCD controller Cursor Off |
wim | 30:033048611c01 | 1112 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 30:033048611c01 | 1113 | |
wim | 30:033048611c01 | 1114 | // Select secondary controller |
wim | 30:033048611c01 | 1115 | _ctrl_idx = _LCDCtrl_1; |
wim | 30:033048611c01 | 1116 | |
wim | 30:033048611c01 | 1117 | // Restore cursormode on secondary LCD controller |
wim | 30:033048611c01 | 1118 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 30:033048611c01 | 1119 | } |
wim | 30:033048611c01 | 1120 | |
wim | 30:033048611c01 | 1121 | return 0x00 + ((row-2) * 0x40) + column; |
wim | 30:033048611c01 | 1122 | } |
wim | 30:033048611c01 | 1123 | |
wim | 30:033048611c01 | 1124 | // Should never get here. |
wim | 30:033048611c01 | 1125 | default: |
wim | 30:033048611c01 | 1126 | return 0x00; |
wim | 30:033048611c01 | 1127 | } |
wim | 30:033048611c01 | 1128 | } |
wim | 30:033048611c01 | 1129 | |
wim | 30:033048611c01 | 1130 | |
wim | 30:033048611c01 | 1131 | #endif |
wim | 30:033048611c01 | 1132 | |
wim | 30:033048611c01 | 1133 | |
wim | 8:03116f75b66e | 1134 | |
wim | 29:a3663151aa65 | 1135 | /** Set the memoryaddress of screen column and row location |
wim | 29:a3663151aa65 | 1136 | * |
wim | 29:a3663151aa65 | 1137 | * @param column The horizontal position from the left, indexed from 0 |
wim | 29:a3663151aa65 | 1138 | * @param row The vertical position from the top, indexed from 0 |
wim | 29:a3663151aa65 | 1139 | */ |
wim | 21:9eb628d9e164 | 1140 | void TextLCD_Base::setAddress(int column, int row) { |
wim | 15:b70ebfffb258 | 1141 | |
wim | 15:b70ebfffb258 | 1142 | // Sanity Check column |
wim | 15:b70ebfffb258 | 1143 | if (column < 0) { |
wim | 15:b70ebfffb258 | 1144 | _column = 0; |
wim | 15:b70ebfffb258 | 1145 | } |
wim | 15:b70ebfffb258 | 1146 | else if (column >= columns()) { |
wim | 15:b70ebfffb258 | 1147 | _column = columns() - 1; |
wim | 15:b70ebfffb258 | 1148 | } else _column = column; |
wim | 8:03116f75b66e | 1149 | |
wim | 15:b70ebfffb258 | 1150 | // Sanity Check row |
wim | 15:b70ebfffb258 | 1151 | if (row < 0) { |
wim | 15:b70ebfffb258 | 1152 | _row = 0; |
wim | 15:b70ebfffb258 | 1153 | } |
wim | 15:b70ebfffb258 | 1154 | else if (row >= rows()) { |
wim | 15:b70ebfffb258 | 1155 | _row = rows() - 1; |
wim | 15:b70ebfffb258 | 1156 | } else _row = row; |
wim | 15:b70ebfffb258 | 1157 | |
wim | 15:b70ebfffb258 | 1158 | |
wim | 15:b70ebfffb258 | 1159 | // Compute the memory address |
wim | 15:b70ebfffb258 | 1160 | // For LCD40x4: switch controllers if needed |
wim | 15:b70ebfffb258 | 1161 | // switch cursor if needed |
wim | 15:b70ebfffb258 | 1162 | int addr = getAddress(_column, _row); |
wim | 8:03116f75b66e | 1163 | |
wim | 13:24506ba22480 | 1164 | _writeCommand(0x80 | addr); |
wim | 8:03116f75b66e | 1165 | } |
simon | 1:ac48b187213c | 1166 | |
wim | 29:a3663151aa65 | 1167 | |
wim | 29:a3663151aa65 | 1168 | /** Return the number of columns |
wim | 29:a3663151aa65 | 1169 | * |
wim | 29:a3663151aa65 | 1170 | * @param return The number of columns |
wim | 30:033048611c01 | 1171 | * |
wim | 30:033048611c01 | 1172 | * Note: some configurations are commented out because they have not yet been tested due to lack of hardware |
wim | 29:a3663151aa65 | 1173 | */ |
wim | 21:9eb628d9e164 | 1174 | int TextLCD_Base::columns() { |
wim | 30:033048611c01 | 1175 | |
wim | 30:033048611c01 | 1176 | // Columns encoded in b7..b0 |
wim | 30:033048611c01 | 1177 | //return (_type & 0xFF); |
wim | 30:033048611c01 | 1178 | return _nr_cols; |
wim | 30:033048611c01 | 1179 | |
wim | 30:033048611c01 | 1180 | #if(0) |
simon | 1:ac48b187213c | 1181 | switch (_type) { |
wim | 8:03116f75b66e | 1182 | case LCD8x1: |
wim | 8:03116f75b66e | 1183 | case LCD8x2: |
wim | 18:bd65dc10f27f | 1184 | case LCD8x2B: |
wim | 8:03116f75b66e | 1185 | return 8; |
wim | 15:b70ebfffb258 | 1186 | |
wim | 15:b70ebfffb258 | 1187 | case LCD12x2: |
wim | 29:a3663151aa65 | 1188 | case LCD12x3B: |
wim | 30:033048611c01 | 1189 | // case LCD12x3C: |
wim | 15:b70ebfffb258 | 1190 | case LCD12x4: |
wim | 29:a3663151aa65 | 1191 | case LCD12x4B: |
wim | 15:b70ebfffb258 | 1192 | return 12; |
wim | 8:03116f75b66e | 1193 | |
wim | 13:24506ba22480 | 1194 | case LCD16x1: |
simon | 1:ac48b187213c | 1195 | case LCD16x2: |
simon | 1:ac48b187213c | 1196 | case LCD16x2B: |
wim | 28:30fa94f7341c | 1197 | // case LCD16x3: |
wim | 8:03116f75b66e | 1198 | case LCD16x4: |
wim | 8:03116f75b66e | 1199 | return 16; |
wim | 8:03116f75b66e | 1200 | |
wim | 30:033048611c01 | 1201 | // case LCD20x1: |
wim | 8:03116f75b66e | 1202 | case LCD20x2: |
wim | 8:03116f75b66e | 1203 | case LCD20x4: |
wim | 8:03116f75b66e | 1204 | return 20; |
wim | 8:03116f75b66e | 1205 | |
wim | 29:a3663151aa65 | 1206 | case LCD24x1: |
wim | 8:03116f75b66e | 1207 | case LCD24x2: |
wim | 30:033048611c01 | 1208 | // case LCD24x3B: |
wim | 29:a3663151aa65 | 1209 | case LCD24x4B: |
wim | 8:03116f75b66e | 1210 | return 24; |
wim | 9:0893d986e717 | 1211 | |
wim | 30:033048611c01 | 1212 | // case LCD40x1: |
wim | 9:0893d986e717 | 1213 | case LCD40x2: |
wim | 15:b70ebfffb258 | 1214 | case LCD40x4: |
wim | 9:0893d986e717 | 1215 | return 40; |
wim | 8:03116f75b66e | 1216 | |
wim | 8:03116f75b66e | 1217 | // Should never get here. |
simon | 1:ac48b187213c | 1218 | default: |
wim | 8:03116f75b66e | 1219 | return 0; |
simon | 1:ac48b187213c | 1220 | } |
wim | 30:033048611c01 | 1221 | #endif |
simon | 1:ac48b187213c | 1222 | } |
simon | 1:ac48b187213c | 1223 | |
wim | 29:a3663151aa65 | 1224 | /** Return the number of rows |
wim | 29:a3663151aa65 | 1225 | * |
wim | 29:a3663151aa65 | 1226 | * @param return The number of rows |
wim | 30:033048611c01 | 1227 | * |
wim | 30:033048611c01 | 1228 | * Note: some configurations are commented out because they have not yet been tested due to lack of hardware |
wim | 29:a3663151aa65 | 1229 | */ |
wim | 21:9eb628d9e164 | 1230 | int TextLCD_Base::rows() { |
wim | 30:033048611c01 | 1231 | |
wim | 30:033048611c01 | 1232 | // Rows encoded in b15..b8 |
wim | 30:033048611c01 | 1233 | //return ((_type >> 8) & 0xFF); |
wim | 30:033048611c01 | 1234 | return _nr_rows; |
wim | 30:033048611c01 | 1235 | |
wim | 30:033048611c01 | 1236 | #if(0) |
simon | 1:ac48b187213c | 1237 | switch (_type) { |
wim | 8:03116f75b66e | 1238 | case LCD8x1: |
wim | 13:24506ba22480 | 1239 | case LCD16x1: |
wim | 30:033048611c01 | 1240 | // case LCD20x1: |
wim | 29:a3663151aa65 | 1241 | case LCD24x1: |
wim | 30:033048611c01 | 1242 | // case LCD40x1: |
wim | 8:03116f75b66e | 1243 | return 1; |
wim | 8:03116f75b66e | 1244 | |
wim | 15:b70ebfffb258 | 1245 | case LCD8x2: |
wim | 18:bd65dc10f27f | 1246 | case LCD8x2B: |
wim | 15:b70ebfffb258 | 1247 | case LCD12x2: |
simon | 1:ac48b187213c | 1248 | case LCD16x2: |
simon | 1:ac48b187213c | 1249 | case LCD16x2B: |
simon | 1:ac48b187213c | 1250 | case LCD20x2: |
wim | 8:03116f75b66e | 1251 | case LCD24x2: |
wim | 9:0893d986e717 | 1252 | case LCD40x2: |
wim | 8:03116f75b66e | 1253 | return 2; |
wim | 28:30fa94f7341c | 1254 | |
wim | 29:a3663151aa65 | 1255 | case LCD12x3B: |
wim | 30:033048611c01 | 1256 | // case LCD12x3C: |
wim | 28:30fa94f7341c | 1257 | // case LCD16x3: |
wim | 30:033048611c01 | 1258 | // case LCD24x3B: |
wim | 29:a3663151aa65 | 1259 | return 3; |
wim | 8:03116f75b66e | 1260 | |
wim | 15:b70ebfffb258 | 1261 | case LCD12x4: |
wim | 29:a3663151aa65 | 1262 | case LCD12x4B: |
wim | 8:03116f75b66e | 1263 | case LCD16x4: |
wim | 8:03116f75b66e | 1264 | case LCD20x4: |
wim | 29:a3663151aa65 | 1265 | case LCD24x4B: |
wim | 15:b70ebfffb258 | 1266 | case LCD40x4: |
wim | 8:03116f75b66e | 1267 | return 4; |
wim | 12:6bf9d9957d31 | 1268 | |
wim | 12:6bf9d9957d31 | 1269 | // Should never get here. |
simon | 1:ac48b187213c | 1270 | default: |
wim | 8:03116f75b66e | 1271 | return 0; |
simon | 1:ac48b187213c | 1272 | } |
wim | 30:033048611c01 | 1273 | #endif |
simon | 1:ac48b187213c | 1274 | } |
wim | 10:dd9b3a696acd | 1275 | |
wim | 29:a3663151aa65 | 1276 | /** Set the Cursormode |
wim | 29:a3663151aa65 | 1277 | * |
wim | 29:a3663151aa65 | 1278 | * @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn) |
wim | 29:a3663151aa65 | 1279 | */ |
wim | 21:9eb628d9e164 | 1280 | void TextLCD_Base::setCursor(LCDCursor cursorMode) { |
wim | 15:b70ebfffb258 | 1281 | |
wim | 17:652ab113bc2e | 1282 | // Save new cursor mode, needed when 2 controllers are in use or when display is switched off/on |
wim | 17:652ab113bc2e | 1283 | _currentCursor = cursorMode; |
wim | 10:dd9b3a696acd | 1284 | |
wim | 17:652ab113bc2e | 1285 | // Configure only current LCD controller |
wim | 17:652ab113bc2e | 1286 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 15:b70ebfffb258 | 1287 | |
wim | 15:b70ebfffb258 | 1288 | } |
wim | 15:b70ebfffb258 | 1289 | |
wim | 29:a3663151aa65 | 1290 | /** Set the Displaymode |
wim | 29:a3663151aa65 | 1291 | * |
wim | 29:a3663151aa65 | 1292 | * @param displayMode The Display mode (DispOff, DispOn) |
wim | 29:a3663151aa65 | 1293 | */ |
wim | 21:9eb628d9e164 | 1294 | void TextLCD_Base::setMode(LCDMode displayMode) { |
wim | 17:652ab113bc2e | 1295 | |
wim | 17:652ab113bc2e | 1296 | // Save new displayMode, needed when 2 controllers are in use or when cursor is changed |
wim | 17:652ab113bc2e | 1297 | _currentMode = displayMode; |
wim | 15:b70ebfffb258 | 1298 | |
wim | 17:652ab113bc2e | 1299 | // Select and configure second LCD controller when needed |
wim | 17:652ab113bc2e | 1300 | if(_type==LCD40x4) { |
wim | 21:9eb628d9e164 | 1301 | if (_ctrl_idx==_LCDCtrl_0) { |
wim | 17:652ab113bc2e | 1302 | // Configure primary LCD controller |
wim | 17:652ab113bc2e | 1303 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 11:9ec02df863a1 | 1304 | |
wim | 17:652ab113bc2e | 1305 | // Select 2nd controller |
wim | 21:9eb628d9e164 | 1306 | _ctrl_idx=_LCDCtrl_1; |
wim | 17:652ab113bc2e | 1307 | |
wim | 17:652ab113bc2e | 1308 | // Configure secondary LCD controller |
wim | 21:9eb628d9e164 | 1309 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 11:9ec02df863a1 | 1310 | |
wim | 17:652ab113bc2e | 1311 | // Restore current controller |
wim | 21:9eb628d9e164 | 1312 | _ctrl_idx=_LCDCtrl_0; |
wim | 17:652ab113bc2e | 1313 | } |
wim | 17:652ab113bc2e | 1314 | else { |
wim | 17:652ab113bc2e | 1315 | // Select primary controller |
wim | 21:9eb628d9e164 | 1316 | _ctrl_idx=_LCDCtrl_0; |
wim | 17:652ab113bc2e | 1317 | |
wim | 17:652ab113bc2e | 1318 | // Configure primary LCD controller |
wim | 21:9eb628d9e164 | 1319 | _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); |
wim | 17:652ab113bc2e | 1320 | |
wim | 17:652ab113bc2e | 1321 | // Restore current controller |
wim | 21:9eb628d9e164 | 1322 | _ctrl_idx=_LCDCtrl_1; |
wim | 11:9ec02df863a1 | 1323 | |
wim | 17:652ab113bc2e | 1324 | // Configure secondary LCD controller |
wim | 17:652ab113bc2e | 1325 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 10:dd9b3a696acd | 1326 | } |
wim | 17:652ab113bc2e | 1327 | } |
wim | 17:652ab113bc2e | 1328 | else { |
wim | 17:652ab113bc2e | 1329 | // Configure primary LCD controller |
wim | 17:652ab113bc2e | 1330 | _setCursorAndDisplayMode(_currentMode, _currentCursor); |
wim | 30:033048611c01 | 1331 | } |
wim | 17:652ab113bc2e | 1332 | } |
wim | 17:652ab113bc2e | 1333 | |
wim | 17:652ab113bc2e | 1334 | |
wim | 29:a3663151aa65 | 1335 | /** Low level method to restore the cursortype and display mode for current controller |
wim | 29:a3663151aa65 | 1336 | */ |
wim | 21:9eb628d9e164 | 1337 | void TextLCD_Base::_setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType) { |
wim | 17:652ab113bc2e | 1338 | |
wim | 17:652ab113bc2e | 1339 | // Configure current LCD controller |
wim | 17:652ab113bc2e | 1340 | _writeCommand(0x08 | displayMode | cursorType); |
wim | 10:dd9b3a696acd | 1341 | } |
wim | 10:dd9b3a696acd | 1342 | |
wim | 29:a3663151aa65 | 1343 | /** Set the Backlight mode |
wim | 29:a3663151aa65 | 1344 | * |
wim | 29:a3663151aa65 | 1345 | * @param backlightMode The Backlight mode (LightOff, LightOn) |
wim | 29:a3663151aa65 | 1346 | */ |
wim | 21:9eb628d9e164 | 1347 | void TextLCD_Base::setBacklight(LCDBacklight backlightMode) { |
wim | 20:e0da005a777f | 1348 | |
wim | 20:e0da005a777f | 1349 | if (backlightMode == LightOn) { |
wim | 21:9eb628d9e164 | 1350 | this->_setBL(true); |
wim | 20:e0da005a777f | 1351 | } |
wim | 20:e0da005a777f | 1352 | else { |
wim | 21:9eb628d9e164 | 1353 | this->_setBL(false); |
wim | 20:e0da005a777f | 1354 | } |
wim | 20:e0da005a777f | 1355 | } |
wim | 20:e0da005a777f | 1356 | |
wim | 29:a3663151aa65 | 1357 | /** Set User Defined Characters |
wim | 29:a3663151aa65 | 1358 | * |
wim | 29:a3663151aa65 | 1359 | * @param unsigned char c The Index of the UDC (0..7) |
wim | 29:a3663151aa65 | 1360 | * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits) |
wim | 29:a3663151aa65 | 1361 | */ |
wim | 21:9eb628d9e164 | 1362 | void TextLCD_Base::setUDC(unsigned char c, char *udc_data) { |
wim | 15:b70ebfffb258 | 1363 | |
wim | 15:b70ebfffb258 | 1364 | // Select and configure second LCD controller when needed |
wim | 15:b70ebfffb258 | 1365 | if(_type==LCD40x4) { |
wim | 19:c747b9e2e7b8 | 1366 | _LCDCtrl_Idx current_ctrl_idx = _ctrl_idx; // Temp save current controller |
wim | 15:b70ebfffb258 | 1367 | |
wim | 15:b70ebfffb258 | 1368 | // Select primary controller |
wim | 21:9eb628d9e164 | 1369 | _ctrl_idx=_LCDCtrl_0; |
wim | 15:b70ebfffb258 | 1370 | |
wim | 15:b70ebfffb258 | 1371 | // Configure primary LCD controller |
wim | 15:b70ebfffb258 | 1372 | _setUDC(c, udc_data); |
wim | 15:b70ebfffb258 | 1373 | |
wim | 15:b70ebfffb258 | 1374 | // Select 2nd controller |
wim | 21:9eb628d9e164 | 1375 | _ctrl_idx=_LCDCtrl_1; |
wim | 15:b70ebfffb258 | 1376 | |
wim | 15:b70ebfffb258 | 1377 | // Configure secondary LCD controller |
wim | 15:b70ebfffb258 | 1378 | _setUDC(c, udc_data); |
wim | 11:9ec02df863a1 | 1379 | |
wim | 15:b70ebfffb258 | 1380 | // Restore current controller |
wim | 19:c747b9e2e7b8 | 1381 | _ctrl_idx=current_ctrl_idx; |
wim | 15:b70ebfffb258 | 1382 | } |
wim | 15:b70ebfffb258 | 1383 | else { |
wim | 15:b70ebfffb258 | 1384 | // Configure primary LCD controller |
wim | 15:b70ebfffb258 | 1385 | _setUDC(c, udc_data); |
wim | 15:b70ebfffb258 | 1386 | } |
wim | 15:b70ebfffb258 | 1387 | |
wim | 15:b70ebfffb258 | 1388 | } |
wim | 15:b70ebfffb258 | 1389 | |
wim | 29:a3663151aa65 | 1390 | /** Low level method to store user defined characters for current controller |
wim | 29:a3663151aa65 | 1391 | */ |
wim | 21:9eb628d9e164 | 1392 | void TextLCD_Base::_setUDC(unsigned char c, char *udc_data) { |
wim | 15:b70ebfffb258 | 1393 | |
wim | 15:b70ebfffb258 | 1394 | // Select CG RAM for current LCD controller |
wim | 15:b70ebfffb258 | 1395 | _writeCommand(0x40 + ((c & 0x07) << 3)); //Set CG-RAM address, |
wim | 15:b70ebfffb258 | 1396 | //8 sequential locations needed per UDC |
wim | 15:b70ebfffb258 | 1397 | // Store UDC pattern |
wim | 11:9ec02df863a1 | 1398 | for (int i=0; i<8; i++) { |
wim | 13:24506ba22480 | 1399 | _writeData(*udc_data++); |
wim | 11:9ec02df863a1 | 1400 | } |
wim | 15:b70ebfffb258 | 1401 | |
wim | 15:b70ebfffb258 | 1402 | //Select DD RAM again for current LCD controller |
wim | 15:b70ebfffb258 | 1403 | int addr = getAddress(_column, _row); |
wim | 30:033048611c01 | 1404 | _writeCommand(0x80 | addr); |
wim | 11:9ec02df863a1 | 1405 | } |
wim | 21:9eb628d9e164 | 1406 | |
wim | 23:d47f226efb24 | 1407 | //--------- End TextLCD_Base ----------- |
wim | 21:9eb628d9e164 | 1408 | |
wim | 22:35742ec80c24 | 1409 | |
wim | 23:d47f226efb24 | 1410 | //--------- Start TextLCD Bus ----------- |
wim | 21:9eb628d9e164 | 1411 | |
wim | 21:9eb628d9e164 | 1412 | /* Create a TextLCD interface for using regular mbed pins |
wim | 21:9eb628d9e164 | 1413 | * |
wim | 21:9eb628d9e164 | 1414 | * @param rs Instruction/data control line |
wim | 21:9eb628d9e164 | 1415 | * @param e Enable line (clock) |
wim | 21:9eb628d9e164 | 1416 | * @param d4-d7 Data lines for using as a 4-bit interface |
wim | 21:9eb628d9e164 | 1417 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 21:9eb628d9e164 | 1418 | * @param bl Backlight control line (optional, default = NC) |
wim | 21:9eb628d9e164 | 1419 | * @param e2 Enable2 line (clock for second controller, LCD40x4 only) |
wim | 21:9eb628d9e164 | 1420 | * @param ctrl LCD controller (default = HD44780) |
wim | 21:9eb628d9e164 | 1421 | */ |
wim | 21:9eb628d9e164 | 1422 | TextLCD::TextLCD(PinName rs, PinName e, |
wim | 21:9eb628d9e164 | 1423 | PinName d4, PinName d5, PinName d6, PinName d7, |
wim | 21:9eb628d9e164 | 1424 | LCDType type, PinName bl, PinName e2, LCDCtrl ctrl) : |
wim | 21:9eb628d9e164 | 1425 | TextLCD_Base(type, ctrl), |
wim | 22:35742ec80c24 | 1426 | _rs(rs), _e(e), _d(d4, d5, d6, d7) { |
wim | 22:35742ec80c24 | 1427 | |
wim | 22:35742ec80c24 | 1428 | // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access. |
wim | 22:35742ec80c24 | 1429 | if (bl != NC) { |
wim | 22:35742ec80c24 | 1430 | _bl = new DigitalOut(bl); //Construct new pin |
wim | 22:35742ec80c24 | 1431 | _bl->write(0); //Deactivate |
wim | 22:35742ec80c24 | 1432 | } |
wim | 22:35742ec80c24 | 1433 | else { |
wim | 22:35742ec80c24 | 1434 | // No Hardware Backlight pin |
wim | 22:35742ec80c24 | 1435 | _bl = NULL; //Construct dummy pin |
wim | 22:35742ec80c24 | 1436 | } |
wim | 22:35742ec80c24 | 1437 | |
wim | 22:35742ec80c24 | 1438 | // The hardware Enable2 pin is only needed for LCD40x4. Test and make sure whether it exists or not to prevent illegal access. |
wim | 22:35742ec80c24 | 1439 | if (e2 != NC) { |
wim | 22:35742ec80c24 | 1440 | _e2 = new DigitalOut(e2); //Construct new pin |
wim | 22:35742ec80c24 | 1441 | _e2->write(0); //Deactivate |
wim | 22:35742ec80c24 | 1442 | } |
wim | 22:35742ec80c24 | 1443 | else { |
wim | 22:35742ec80c24 | 1444 | // No Hardware Enable pin |
wim | 22:35742ec80c24 | 1445 | _e2 = NULL; //Construct dummy pin |
wim | 22:35742ec80c24 | 1446 | } |
wim | 21:9eb628d9e164 | 1447 | |
wim | 21:9eb628d9e164 | 1448 | _init(); |
wim | 21:9eb628d9e164 | 1449 | } |
wim | 21:9eb628d9e164 | 1450 | |
wim | 29:a3663151aa65 | 1451 | /** Destruct a TextLCD interface for using regular mbed pins |
wim | 29:a3663151aa65 | 1452 | * |
wim | 29:a3663151aa65 | 1453 | * @param none |
wim | 29:a3663151aa65 | 1454 | * @return none |
wim | 29:a3663151aa65 | 1455 | */ |
wim | 29:a3663151aa65 | 1456 | TextLCD::~TextLCD() { |
wim | 29:a3663151aa65 | 1457 | if (_bl != NULL) {delete _bl;} // BL pin |
wim | 29:a3663151aa65 | 1458 | if (_e2 != NULL) {delete _e2;} // E2 pin |
wim | 29:a3663151aa65 | 1459 | } |
wim | 29:a3663151aa65 | 1460 | |
wim | 29:a3663151aa65 | 1461 | |
wim | 22:35742ec80c24 | 1462 | /** Set E pin (or E2 pin) |
wim | 22:35742ec80c24 | 1463 | * Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 22:35742ec80c24 | 1464 | * Default PinName value for E2 is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins |
wim | 22:35742ec80c24 | 1465 | * @param value true or false |
wim | 22:35742ec80c24 | 1466 | * @return none |
wim | 22:35742ec80c24 | 1467 | */ |
wim | 21:9eb628d9e164 | 1468 | void TextLCD::_setEnable(bool value) { |
wim | 21:9eb628d9e164 | 1469 | |
wim | 22:35742ec80c24 | 1470 | if(_ctrl_idx==_LCDCtrl_0) { |
wim | 22:35742ec80c24 | 1471 | if (value) { |
wim | 22:35742ec80c24 | 1472 | _e = 1; // Set E bit |
wim | 22:35742ec80c24 | 1473 | } |
wim | 22:35742ec80c24 | 1474 | else { |
wim | 22:35742ec80c24 | 1475 | _e = 0; // Reset E bit |
wim | 22:35742ec80c24 | 1476 | } |
wim | 22:35742ec80c24 | 1477 | } |
wim | 22:35742ec80c24 | 1478 | else { |
wim | 22:35742ec80c24 | 1479 | if (value) { |
wim | 22:35742ec80c24 | 1480 | if (_e2 != NULL) {_e2->write(1);} //Set E2 bit |
wim | 22:35742ec80c24 | 1481 | } |
wim | 22:35742ec80c24 | 1482 | else { |
wim | 22:35742ec80c24 | 1483 | if (_e2 != NULL) {_e2->write(0);} //Reset E2 bit |
wim | 22:35742ec80c24 | 1484 | } |
wim | 22:35742ec80c24 | 1485 | } |
wim | 21:9eb628d9e164 | 1486 | } |
wim | 21:9eb628d9e164 | 1487 | |
wim | 21:9eb628d9e164 | 1488 | // Set RS pin |
wim | 21:9eb628d9e164 | 1489 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1490 | void TextLCD::_setRS(bool value) { |
wim | 21:9eb628d9e164 | 1491 | |
wim | 22:35742ec80c24 | 1492 | if (value) { |
wim | 21:9eb628d9e164 | 1493 | _rs = 1; // Set RS bit |
wim | 22:35742ec80c24 | 1494 | } |
wim | 22:35742ec80c24 | 1495 | else { |
wim | 21:9eb628d9e164 | 1496 | _rs = 0; // Reset RS bit |
wim | 22:35742ec80c24 | 1497 | } |
wim | 21:9eb628d9e164 | 1498 | } |
wim | 21:9eb628d9e164 | 1499 | |
wim | 22:35742ec80c24 | 1500 | /** Set BL pin |
wim | 22:35742ec80c24 | 1501 | * Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 22:35742ec80c24 | 1502 | * Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins |
wim | 22:35742ec80c24 | 1503 | * @param value true or false |
wim | 22:35742ec80c24 | 1504 | * @return none |
wim | 22:35742ec80c24 | 1505 | */ |
wim | 21:9eb628d9e164 | 1506 | void TextLCD::_setBL(bool value) { |
wim | 21:9eb628d9e164 | 1507 | |
wim | 22:35742ec80c24 | 1508 | if (value) { |
wim | 22:35742ec80c24 | 1509 | if (_bl != NULL) {_bl->write(1);} //Set BL bit |
wim | 22:35742ec80c24 | 1510 | } |
wim | 22:35742ec80c24 | 1511 | else { |
wim | 22:35742ec80c24 | 1512 | if (_bl != NULL) {_bl->write(0);} //Reset BL bit |
wim | 22:35742ec80c24 | 1513 | } |
wim | 21:9eb628d9e164 | 1514 | |
wim | 21:9eb628d9e164 | 1515 | } |
wim | 21:9eb628d9e164 | 1516 | |
wim | 21:9eb628d9e164 | 1517 | // Place the 4bit data on the databus |
wim | 21:9eb628d9e164 | 1518 | // Used for mbed pins, I2C bus expander or SPI shifregister |
wim | 21:9eb628d9e164 | 1519 | void TextLCD::_setData(int value) { |
wim | 21:9eb628d9e164 | 1520 | _d = value & 0x0F; // Write Databits |
wim | 21:9eb628d9e164 | 1521 | } |
wim | 22:35742ec80c24 | 1522 | |
wim | 23:d47f226efb24 | 1523 | //----------- End TextLCD --------------- |
wim | 21:9eb628d9e164 | 1524 | |
wim | 21:9eb628d9e164 | 1525 | |
wim | 23:d47f226efb24 | 1526 | //--------- Start TextLCD_I2C ----------- |
wim | 22:35742ec80c24 | 1527 | |
wim | 26:bd897a001012 | 1528 | /** Create a TextLCD interface using an I2C PC8574 (or PCF8574A) or MCP23008 portexpander |
wim | 22:35742ec80c24 | 1529 | * |
wim | 22:35742ec80c24 | 1530 | * @param i2c I2C Bus |
wim | 26:bd897a001012 | 1531 | * @param deviceAddress I2C slave address (PCF8574, PCF8574A or MCP23008, default = 0x40) |
wim | 22:35742ec80c24 | 1532 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 22:35742ec80c24 | 1533 | * @param ctrl LCD controller (default = HD44780) |
wim | 22:35742ec80c24 | 1534 | */ |
wim | 21:9eb628d9e164 | 1535 | TextLCD_I2C::TextLCD_I2C(I2C *i2c, char deviceAddress, LCDType type, LCDCtrl ctrl) : |
wim | 21:9eb628d9e164 | 1536 | TextLCD_Base(type, ctrl), |
wim | 21:9eb628d9e164 | 1537 | _i2c(i2c){ |
wim | 21:9eb628d9e164 | 1538 | |
wim | 22:35742ec80c24 | 1539 | _slaveAddress = deviceAddress & 0xFE; |
wim | 28:30fa94f7341c | 1540 | |
wim | 28:30fa94f7341c | 1541 | // Setup the I2C bus |
wim | 28:30fa94f7341c | 1542 | // The max bitrate for PCF8574 is 100kbit, the max bitrate for MCP23008 is 400kbit, |
wim | 28:30fa94f7341c | 1543 | // _i2c->frequency(100000); |
wim | 21:9eb628d9e164 | 1544 | |
wim | 26:bd897a001012 | 1545 | #if (MCP23008==1) |
wim | 26:bd897a001012 | 1546 | // MCP23008 portexpander Init |
wim | 27:22d5086f6ba6 | 1547 | _write_register(IODIR, 0x00); // All outputs |
wim | 27:22d5086f6ba6 | 1548 | _write_register(IPOL, 0x00); // No reverse polarity |
wim | 27:22d5086f6ba6 | 1549 | _write_register(GPINTEN, 0x00); // No interrupt |
wim | 27:22d5086f6ba6 | 1550 | _write_register(DEFVAL, 0x00); // Default value to compare against for interrupts |
wim | 27:22d5086f6ba6 | 1551 | _write_register(INTCON, 0x00); // No interrupt on changes |
wim | 27:22d5086f6ba6 | 1552 | _write_register(IOCON, 0x00); // Interrupt polarity |
wim | 27:22d5086f6ba6 | 1553 | _write_register(GPPU, 0x00); // No Pullup |
wim | 27:22d5086f6ba6 | 1554 | _write_register(INTF, 0x00); // |
wim | 27:22d5086f6ba6 | 1555 | _write_register(INTCAP, 0x00); // |
wim | 27:22d5086f6ba6 | 1556 | _write_register(GPIO, 0x00); // Output/Input pins |
wim | 27:22d5086f6ba6 | 1557 | _write_register(OLAT, 0x00); // Output Latch |
wim | 26:bd897a001012 | 1558 | |
wim | 21:9eb628d9e164 | 1559 | // Init the portexpander bus |
wim | 21:9eb628d9e164 | 1560 | _lcd_bus = D_LCD_BUS_DEF; |
wim | 21:9eb628d9e164 | 1561 | |
wim | 21:9eb628d9e164 | 1562 | // write the new data to the portexpander |
wim | 26:bd897a001012 | 1563 | _write_register(GPIO, _lcd_bus); |
wim | 26:bd897a001012 | 1564 | #else |
wim | 26:bd897a001012 | 1565 | // PCF8574 of PCF8574A portexpander |
wim | 26:bd897a001012 | 1566 | |
wim | 26:bd897a001012 | 1567 | // Init the portexpander bus |
wim | 26:bd897a001012 | 1568 | _lcd_bus = D_LCD_BUS_DEF; |
wim | 26:bd897a001012 | 1569 | |
wim | 26:bd897a001012 | 1570 | // write the new data to the portexpander |
wim | 21:9eb628d9e164 | 1571 | _i2c->write(_slaveAddress, &_lcd_bus, 1); |
wim | 26:bd897a001012 | 1572 | #endif |
wim | 21:9eb628d9e164 | 1573 | |
wim | 30:033048611c01 | 1574 | _init(); |
wim | 21:9eb628d9e164 | 1575 | } |
wim | 21:9eb628d9e164 | 1576 | |
wim | 21:9eb628d9e164 | 1577 | // Set E pin (or E2 pin) |
wim | 21:9eb628d9e164 | 1578 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1579 | void TextLCD_I2C::_setEnable(bool value) { |
wim | 21:9eb628d9e164 | 1580 | |
wim | 22:35742ec80c24 | 1581 | if(_ctrl_idx==_LCDCtrl_0) { |
wim | 26:bd897a001012 | 1582 | if (value) { |
wim | 22:35742ec80c24 | 1583 | _lcd_bus |= D_LCD_E; // Set E bit |
wim | 26:bd897a001012 | 1584 | } |
wim | 26:bd897a001012 | 1585 | else { |
wim | 22:35742ec80c24 | 1586 | _lcd_bus &= ~D_LCD_E; // Reset E bit |
wim | 26:bd897a001012 | 1587 | } |
wim | 22:35742ec80c24 | 1588 | } |
wim | 22:35742ec80c24 | 1589 | else { |
wim | 26:bd897a001012 | 1590 | if (value) { |
wim | 22:35742ec80c24 | 1591 | _lcd_bus |= D_LCD_E2; // Set E2 bit |
wim | 26:bd897a001012 | 1592 | } |
wim | 26:bd897a001012 | 1593 | else { |
wim | 22:35742ec80c24 | 1594 | _lcd_bus &= ~D_LCD_E2; // Reset E2bit |
wim | 26:bd897a001012 | 1595 | } |
wim | 26:bd897a001012 | 1596 | } |
wim | 26:bd897a001012 | 1597 | |
wim | 26:bd897a001012 | 1598 | #if (MCP23008==1) |
wim | 26:bd897a001012 | 1599 | // MCP23008 portexpander |
wim | 26:bd897a001012 | 1600 | |
wim | 26:bd897a001012 | 1601 | // write the new data to the portexpander |
wim | 26:bd897a001012 | 1602 | _write_register(GPIO, _lcd_bus); |
wim | 26:bd897a001012 | 1603 | #else |
wim | 26:bd897a001012 | 1604 | // PCF8574 of PCF8574A portexpander |
wim | 21:9eb628d9e164 | 1605 | |
wim | 22:35742ec80c24 | 1606 | // write the new data to the I2C portexpander |
wim | 22:35742ec80c24 | 1607 | _i2c->write(_slaveAddress, &_lcd_bus, 1); |
wim | 26:bd897a001012 | 1608 | #endif |
wim | 21:9eb628d9e164 | 1609 | } |
wim | 21:9eb628d9e164 | 1610 | |
wim | 21:9eb628d9e164 | 1611 | // Set RS pin |
wim | 21:9eb628d9e164 | 1612 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1613 | void TextLCD_I2C::_setRS(bool value) { |
wim | 21:9eb628d9e164 | 1614 | |
wim | 26:bd897a001012 | 1615 | if (value) { |
wim | 22:35742ec80c24 | 1616 | _lcd_bus |= D_LCD_RS; // Set RS bit |
wim | 26:bd897a001012 | 1617 | } |
wim | 26:bd897a001012 | 1618 | else { |
wim | 22:35742ec80c24 | 1619 | _lcd_bus &= ~D_LCD_RS; // Reset RS bit |
wim | 26:bd897a001012 | 1620 | } |
wim | 26:bd897a001012 | 1621 | |
wim | 26:bd897a001012 | 1622 | #if (MCP23008==1) |
wim | 26:bd897a001012 | 1623 | // MCP23008 portexpander |
wim | 26:bd897a001012 | 1624 | |
wim | 26:bd897a001012 | 1625 | // write the new data to the portexpander |
wim | 26:bd897a001012 | 1626 | _write_register(GPIO, _lcd_bus); |
wim | 26:bd897a001012 | 1627 | #else |
wim | 26:bd897a001012 | 1628 | // PCF8574 of PCF8574A portexpander |
wim | 21:9eb628d9e164 | 1629 | |
wim | 22:35742ec80c24 | 1630 | // write the new data to the I2C portexpander |
wim | 22:35742ec80c24 | 1631 | _i2c->write(_slaveAddress, &_lcd_bus, 1); |
wim | 30:033048611c01 | 1632 | #endif |
wim | 21:9eb628d9e164 | 1633 | } |
wim | 21:9eb628d9e164 | 1634 | |
wim | 21:9eb628d9e164 | 1635 | // Set BL pin |
wim | 21:9eb628d9e164 | 1636 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1637 | void TextLCD_I2C::_setBL(bool value) { |
wim | 21:9eb628d9e164 | 1638 | |
wim | 26:bd897a001012 | 1639 | if (value) { |
wim | 21:9eb628d9e164 | 1640 | _lcd_bus |= D_LCD_BL; // Set BL bit |
wim | 26:bd897a001012 | 1641 | } |
wim | 26:bd897a001012 | 1642 | else { |
wim | 21:9eb628d9e164 | 1643 | _lcd_bus &= ~D_LCD_BL; // Reset BL bit |
wim | 26:bd897a001012 | 1644 | } |
wim | 26:bd897a001012 | 1645 | |
wim | 26:bd897a001012 | 1646 | #if (MCP23008==1) |
wim | 26:bd897a001012 | 1647 | // MCP23008 portexpander |
wim | 26:bd897a001012 | 1648 | |
wim | 26:bd897a001012 | 1649 | // write the new data to the portexpander |
wim | 26:bd897a001012 | 1650 | _write_register(GPIO, _lcd_bus); |
wim | 26:bd897a001012 | 1651 | #else |
wim | 26:bd897a001012 | 1652 | // PCF8574 of PCF8574A portexpander |
wim | 21:9eb628d9e164 | 1653 | |
wim | 21:9eb628d9e164 | 1654 | // write the new data to the I2C portexpander |
wim | 21:9eb628d9e164 | 1655 | _i2c->write(_slaveAddress, &_lcd_bus, 1); |
wim | 30:033048611c01 | 1656 | #endif |
wim | 21:9eb628d9e164 | 1657 | } |
wim | 21:9eb628d9e164 | 1658 | |
wim | 21:9eb628d9e164 | 1659 | |
wim | 21:9eb628d9e164 | 1660 | // Place the 4bit data on the databus |
wim | 21:9eb628d9e164 | 1661 | // Used for mbed pins, I2C bus expander or SPI shifregister |
wim | 21:9eb628d9e164 | 1662 | void TextLCD_I2C::_setData(int value) { |
wim | 21:9eb628d9e164 | 1663 | int data; |
wim | 22:35742ec80c24 | 1664 | |
wim | 22:35742ec80c24 | 1665 | // Set bit by bit to support any mapping of expander portpins to LCD pins |
wim | 21:9eb628d9e164 | 1666 | |
wim | 22:35742ec80c24 | 1667 | data = value & 0x0F; |
wim | 26:bd897a001012 | 1668 | if (data & 0x01){ |
wim | 22:35742ec80c24 | 1669 | _lcd_bus |= D_LCD_D4; // Set Databit |
wim | 26:bd897a001012 | 1670 | } |
wim | 26:bd897a001012 | 1671 | else { |
wim | 26:bd897a001012 | 1672 | _lcd_bus &= ~D_LCD_D4; // Reset Databit |
wim | 26:bd897a001012 | 1673 | } |
wim | 21:9eb628d9e164 | 1674 | |
wim | 26:bd897a001012 | 1675 | if (data & 0x02){ |
wim | 22:35742ec80c24 | 1676 | _lcd_bus |= D_LCD_D5; // Set Databit |
wim | 26:bd897a001012 | 1677 | } |
wim | 26:bd897a001012 | 1678 | else { |
wim | 26:bd897a001012 | 1679 | _lcd_bus &= ~D_LCD_D5; // Reset Databit |
wim | 26:bd897a001012 | 1680 | } |
wim | 21:9eb628d9e164 | 1681 | |
wim | 26:bd897a001012 | 1682 | if (data & 0x04) { |
wim | 22:35742ec80c24 | 1683 | _lcd_bus |= D_LCD_D6; // Set Databit |
wim | 26:bd897a001012 | 1684 | } |
wim | 26:bd897a001012 | 1685 | else { |
wim | 26:bd897a001012 | 1686 | _lcd_bus &= ~D_LCD_D6; // Reset Databit |
wim | 26:bd897a001012 | 1687 | } |
wim | 21:9eb628d9e164 | 1688 | |
wim | 26:bd897a001012 | 1689 | if (data & 0x08) { |
wim | 22:35742ec80c24 | 1690 | _lcd_bus |= D_LCD_D7; // Set Databit |
wim | 26:bd897a001012 | 1691 | } |
wim | 26:bd897a001012 | 1692 | else { |
wim | 26:bd897a001012 | 1693 | _lcd_bus &= ~D_LCD_D7; // Reset Databit |
wim | 26:bd897a001012 | 1694 | } |
wim | 21:9eb628d9e164 | 1695 | |
wim | 26:bd897a001012 | 1696 | #if (MCP23008==1) |
wim | 26:bd897a001012 | 1697 | // MCP23008 portexpander |
wim | 26:bd897a001012 | 1698 | |
wim | 26:bd897a001012 | 1699 | // write the new data to the portexpander |
wim | 26:bd897a001012 | 1700 | _write_register(GPIO, _lcd_bus); |
wim | 26:bd897a001012 | 1701 | #else |
wim | 26:bd897a001012 | 1702 | // PCF8574 of PCF8574A portexpander |
wim | 26:bd897a001012 | 1703 | |
wim | 22:35742ec80c24 | 1704 | // write the new data to the I2C portexpander |
wim | 26:bd897a001012 | 1705 | _i2c->write(_slaveAddress, &_lcd_bus, 1); |
wim | 26:bd897a001012 | 1706 | #endif |
wim | 22:35742ec80c24 | 1707 | |
wim | 22:35742ec80c24 | 1708 | } |
wim | 21:9eb628d9e164 | 1709 | |
wim | 26:bd897a001012 | 1710 | // Write data to MCP23008 I2C portexpander |
wim | 26:bd897a001012 | 1711 | void TextLCD_I2C::_write_register (int reg, int value) { |
wim | 26:bd897a001012 | 1712 | char data[] = {reg, value}; |
wim | 26:bd897a001012 | 1713 | |
wim | 30:033048611c01 | 1714 | _i2c->write(_slaveAddress, data, 2); |
wim | 26:bd897a001012 | 1715 | } |
wim | 26:bd897a001012 | 1716 | |
wim | 23:d47f226efb24 | 1717 | //---------- End TextLCD_I2C ------------ |
wim | 21:9eb628d9e164 | 1718 | |
wim | 21:9eb628d9e164 | 1719 | |
wim | 28:30fa94f7341c | 1720 | //--------- Start TextLCD_I2C_N --------- |
wim | 28:30fa94f7341c | 1721 | |
wim | 28:30fa94f7341c | 1722 | /** Create a TextLCD interface using a controller with native I2C interface |
wim | 28:30fa94f7341c | 1723 | * |
wim | 28:30fa94f7341c | 1724 | * @param i2c I2C Bus |
wim | 28:30fa94f7341c | 1725 | * @param deviceAddress I2C slave address (default = 0x7C) |
wim | 28:30fa94f7341c | 1726 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 28:30fa94f7341c | 1727 | * @param bl Backlight control line (optional, default = NC) |
wim | 28:30fa94f7341c | 1728 | * @param ctrl LCD controller (default = ST7032_3V3) |
wim | 28:30fa94f7341c | 1729 | */ |
wim | 28:30fa94f7341c | 1730 | TextLCD_I2C_N::TextLCD_I2C_N(I2C *i2c, char deviceAddress, LCDType type, PinName bl, LCDCtrl ctrl) : |
wim | 28:30fa94f7341c | 1731 | TextLCD_Base(type, ctrl), |
wim | 28:30fa94f7341c | 1732 | _i2c(i2c){ |
wim | 30:033048611c01 | 1733 | |
wim | 28:30fa94f7341c | 1734 | _slaveAddress = deviceAddress & 0xFE; |
wim | 28:30fa94f7341c | 1735 | |
wim | 28:30fa94f7341c | 1736 | // Setup the I2C bus |
wim | 29:a3663151aa65 | 1737 | // The max bitrate for ST7032i is 400kbit, lets stick to default here |
wim | 29:a3663151aa65 | 1738 | _i2c->frequency(100000); |
wim | 29:a3663151aa65 | 1739 | // _i2c->frequency(50000); |
wim | 30:033048611c01 | 1740 | |
wim | 28:30fa94f7341c | 1741 | // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access. |
wim | 28:30fa94f7341c | 1742 | if (bl != NC) { |
wim | 28:30fa94f7341c | 1743 | _bl = new DigitalOut(bl); //Construct new pin |
wim | 28:30fa94f7341c | 1744 | _bl->write(0); //Deactivate |
wim | 28:30fa94f7341c | 1745 | } |
wim | 28:30fa94f7341c | 1746 | else { |
wim | 28:30fa94f7341c | 1747 | // No Hardware Backlight pin |
wim | 28:30fa94f7341c | 1748 | _bl = NULL; //Construct dummy pin |
wim | 28:30fa94f7341c | 1749 | } |
wim | 28:30fa94f7341c | 1750 | |
wim | 30:033048611c01 | 1751 | #if(0) |
wim | 30:033048611c01 | 1752 | //Sanity check |
wim | 30:033048611c01 | 1753 | switch (_ctrl) { |
wim | 30:033048611c01 | 1754 | case ST7032_3V3: |
wim | 30:033048611c01 | 1755 | case ST7032_5V: |
wim | 30:033048611c01 | 1756 | case PCF21XX_3V3: |
wim | 30:033048611c01 | 1757 | // case PCF21XX_5V: |
wim | 30:033048611c01 | 1758 | _init(); |
wim | 30:033048611c01 | 1759 | break; |
wim | 30:033048611c01 | 1760 | |
wim | 30:033048611c01 | 1761 | default: |
wim | 30:033048611c01 | 1762 | error("Error: LCD Controller type does not support native I2C interface\n\r"); |
wim | 30:033048611c01 | 1763 | } |
wim | 30:033048611c01 | 1764 | #endif |
wim | 30:033048611c01 | 1765 | |
wim | 30:033048611c01 | 1766 | //Sanity check |
wim | 30:033048611c01 | 1767 | if (_ctrl & LCD_C_I2C) { |
wim | 30:033048611c01 | 1768 | _init(); |
wim | 30:033048611c01 | 1769 | } |
wim | 30:033048611c01 | 1770 | else { |
wim | 30:033048611c01 | 1771 | error("Error: LCD Controller type does not support native I2C interface\n\r"); |
wim | 30:033048611c01 | 1772 | } |
wim | 30:033048611c01 | 1773 | |
wim | 28:30fa94f7341c | 1774 | } |
wim | 28:30fa94f7341c | 1775 | |
wim | 28:30fa94f7341c | 1776 | TextLCD_I2C_N::~TextLCD_I2C_N() { |
wim | 28:30fa94f7341c | 1777 | if (_bl != NULL) {delete _bl;} // BL pin |
wim | 28:30fa94f7341c | 1778 | } |
wim | 28:30fa94f7341c | 1779 | |
wim | 28:30fa94f7341c | 1780 | // Not used in this mode |
wim | 28:30fa94f7341c | 1781 | void TextLCD_I2C_N::_setEnable(bool value) { |
wim | 28:30fa94f7341c | 1782 | } |
wim | 28:30fa94f7341c | 1783 | |
wim | 28:30fa94f7341c | 1784 | // Set RS pin |
wim | 28:30fa94f7341c | 1785 | // Used for mbed pins, I2C bus expander or SPI shiftregister and native I2C or SPI |
wim | 28:30fa94f7341c | 1786 | void TextLCD_I2C_N::_setRS(bool value) { |
wim | 30:033048611c01 | 1787 | // The controlbyte defines the meaning of the next byte. This next byte can either be data or command. |
wim | 30:033048611c01 | 1788 | // Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop |
wim | 30:033048611c01 | 1789 | // Co RS RW 0 0 0 0 0 command or data |
wim | 30:033048611c01 | 1790 | // |
wim | 30:033048611c01 | 1791 | // C0=1 indicates that another controlbyte will follow after the next data or command byte |
wim | 30:033048611c01 | 1792 | // RS=1 means that next byte is data, RS=0 means that next byte is command |
wim | 30:033048611c01 | 1793 | // RW=0 means write to controller. RW=1 means that controller will be read from after the next command. |
wim | 30:033048611c01 | 1794 | // Many native I2C controllers dont support this option and it is not used by this lib. |
wim | 30:033048611c01 | 1795 | // |
wim | 30:033048611c01 | 1796 | |
wim | 28:30fa94f7341c | 1797 | if (value) { |
wim | 28:30fa94f7341c | 1798 | _controlbyte = 0x40; // Next byte is data, No more control bytes will follow |
wim | 28:30fa94f7341c | 1799 | } |
wim | 28:30fa94f7341c | 1800 | else { |
wim | 28:30fa94f7341c | 1801 | _controlbyte = 0x00; // Next byte is command, No more control bytes will follow |
wim | 28:30fa94f7341c | 1802 | } |
wim | 28:30fa94f7341c | 1803 | } |
wim | 28:30fa94f7341c | 1804 | |
wim | 28:30fa94f7341c | 1805 | // Set BL pin |
wim | 28:30fa94f7341c | 1806 | void TextLCD_I2C_N::_setBL(bool value) { |
wim | 28:30fa94f7341c | 1807 | if (_bl) { |
wim | 28:30fa94f7341c | 1808 | _bl->write(value); |
wim | 28:30fa94f7341c | 1809 | } |
wim | 28:30fa94f7341c | 1810 | } |
wim | 29:a3663151aa65 | 1811 | |
wim | 29:a3663151aa65 | 1812 | // Not used in this mode |
wim | 29:a3663151aa65 | 1813 | void TextLCD_I2C_N::_setData(int value) { |
wim | 29:a3663151aa65 | 1814 | } |
wim | 29:a3663151aa65 | 1815 | |
wim | 28:30fa94f7341c | 1816 | // Write a byte using I2C |
wim | 28:30fa94f7341c | 1817 | void TextLCD_I2C_N::_writeByte(int value) { |
wim | 30:033048611c01 | 1818 | // The controlbyte defines the meaning of the next byte. This next byte can either be data or command. |
wim | 30:033048611c01 | 1819 | // Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop |
wim | 30:033048611c01 | 1820 | // Co RS RW 0 0 0 0 0 command or data |
wim | 30:033048611c01 | 1821 | // |
wim | 30:033048611c01 | 1822 | // C0=1 indicates that another controlbyte will follow after the next data or command byte |
wim | 30:033048611c01 | 1823 | // RS=1 means that next byte is data, RS=0 means that next byte is command |
wim | 30:033048611c01 | 1824 | // RW=0 means write to controller. RW=1 means that controller will be read from after the next command. |
wim | 30:033048611c01 | 1825 | // Many native I2C controllers dont support this option and it is not used by this lib. |
wim | 30:033048611c01 | 1826 | // |
wim | 28:30fa94f7341c | 1827 | char data[] = {_controlbyte, value}; |
wim | 28:30fa94f7341c | 1828 | |
wim | 30:033048611c01 | 1829 | _i2c->write(_slaveAddress, data, 2); |
wim | 28:30fa94f7341c | 1830 | } |
wim | 28:30fa94f7341c | 1831 | |
wim | 28:30fa94f7341c | 1832 | //-------- End TextLCD_I2C_N ------------ |
wim | 28:30fa94f7341c | 1833 | |
wim | 28:30fa94f7341c | 1834 | |
wim | 23:d47f226efb24 | 1835 | //--------- Start TextLCD_SPI ----------- |
wim | 21:9eb628d9e164 | 1836 | |
wim | 22:35742ec80c24 | 1837 | /** Create a TextLCD interface using an SPI 74595 portexpander |
wim | 22:35742ec80c24 | 1838 | * |
wim | 22:35742ec80c24 | 1839 | * @param spi SPI Bus |
wim | 22:35742ec80c24 | 1840 | * @param cs chip select pin (active low) |
wim | 22:35742ec80c24 | 1841 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 22:35742ec80c24 | 1842 | * @param ctrl LCD controller (default = HD44780) |
wim | 22:35742ec80c24 | 1843 | */ |
wim | 21:9eb628d9e164 | 1844 | TextLCD_SPI::TextLCD_SPI(SPI *spi, PinName cs, LCDType type, LCDCtrl ctrl) : |
wim | 21:9eb628d9e164 | 1845 | TextLCD_Base(type, ctrl), |
wim | 21:9eb628d9e164 | 1846 | _spi(spi), |
wim | 21:9eb628d9e164 | 1847 | _cs(cs) { |
wim | 21:9eb628d9e164 | 1848 | |
wim | 21:9eb628d9e164 | 1849 | // Setup the spi for 8 bit data, low steady state clock, |
wim | 21:9eb628d9e164 | 1850 | // rising edge capture, with a 500KHz or 1MHz clock rate |
wim | 21:9eb628d9e164 | 1851 | _spi->format(8,0); |
wim | 21:9eb628d9e164 | 1852 | _spi->frequency(500000); |
wim | 21:9eb628d9e164 | 1853 | //_spi.frequency(1000000); |
wim | 21:9eb628d9e164 | 1854 | |
wim | 21:9eb628d9e164 | 1855 | // Init the portexpander bus |
wim | 21:9eb628d9e164 | 1856 | _lcd_bus = D_LCD_BUS_DEF; |
wim | 21:9eb628d9e164 | 1857 | |
wim | 21:9eb628d9e164 | 1858 | // write the new data to the portexpander |
wim | 21:9eb628d9e164 | 1859 | _setCS(false); |
wim | 21:9eb628d9e164 | 1860 | _spi->write(_lcd_bus); |
wim | 21:9eb628d9e164 | 1861 | _setCS(true); |
wim | 30:033048611c01 | 1862 | |
wim | 30:033048611c01 | 1863 | _init(); |
wim | 21:9eb628d9e164 | 1864 | } |
wim | 21:9eb628d9e164 | 1865 | |
wim | 21:9eb628d9e164 | 1866 | // Set E pin (or E2 pin) |
wim | 21:9eb628d9e164 | 1867 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1868 | void TextLCD_SPI::_setEnable(bool value) { |
wim | 21:9eb628d9e164 | 1869 | |
wim | 22:35742ec80c24 | 1870 | if(_ctrl_idx==_LCDCtrl_0) { |
wim | 26:bd897a001012 | 1871 | if (value) { |
wim | 22:35742ec80c24 | 1872 | _lcd_bus |= D_LCD_E; // Set E bit |
wim | 26:bd897a001012 | 1873 | } |
wim | 26:bd897a001012 | 1874 | else { |
wim | 22:35742ec80c24 | 1875 | _lcd_bus &= ~D_LCD_E; // Reset E bit |
wim | 26:bd897a001012 | 1876 | } |
wim | 22:35742ec80c24 | 1877 | } |
wim | 22:35742ec80c24 | 1878 | else { |
wim | 26:bd897a001012 | 1879 | if (value) { |
wim | 22:35742ec80c24 | 1880 | _lcd_bus |= D_LCD_E2; // Set E2 bit |
wim | 26:bd897a001012 | 1881 | } |
wim | 26:bd897a001012 | 1882 | else { |
wim | 22:35742ec80c24 | 1883 | _lcd_bus &= ~D_LCD_E2; // Reset E2 bit |
wim | 26:bd897a001012 | 1884 | } |
wim | 22:35742ec80c24 | 1885 | } |
wim | 21:9eb628d9e164 | 1886 | |
wim | 22:35742ec80c24 | 1887 | // write the new data to the SPI portexpander |
wim | 22:35742ec80c24 | 1888 | _setCS(false); |
wim | 22:35742ec80c24 | 1889 | _spi->write(_lcd_bus); |
wim | 30:033048611c01 | 1890 | _setCS(true); |
wim | 21:9eb628d9e164 | 1891 | } |
wim | 21:9eb628d9e164 | 1892 | |
wim | 21:9eb628d9e164 | 1893 | // Set RS pin |
wim | 21:9eb628d9e164 | 1894 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1895 | void TextLCD_SPI::_setRS(bool value) { |
wim | 21:9eb628d9e164 | 1896 | |
wim | 22:35742ec80c24 | 1897 | if (value) { |
wim | 21:9eb628d9e164 | 1898 | _lcd_bus |= D_LCD_RS; // Set RS bit |
wim | 22:35742ec80c24 | 1899 | } |
wim | 22:35742ec80c24 | 1900 | else { |
wim | 21:9eb628d9e164 | 1901 | _lcd_bus &= ~D_LCD_RS; // Reset RS bit |
wim | 22:35742ec80c24 | 1902 | } |
wim | 21:9eb628d9e164 | 1903 | |
wim | 21:9eb628d9e164 | 1904 | // write the new data to the SPI portexpander |
wim | 21:9eb628d9e164 | 1905 | _setCS(false); |
wim | 21:9eb628d9e164 | 1906 | _spi->write(_lcd_bus); |
wim | 21:9eb628d9e164 | 1907 | _setCS(true); |
wim | 21:9eb628d9e164 | 1908 | } |
wim | 21:9eb628d9e164 | 1909 | |
wim | 21:9eb628d9e164 | 1910 | // Set BL pin |
wim | 21:9eb628d9e164 | 1911 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1912 | void TextLCD_SPI::_setBL(bool value) { |
wim | 21:9eb628d9e164 | 1913 | |
wim | 22:35742ec80c24 | 1914 | if (value) { |
wim | 21:9eb628d9e164 | 1915 | _lcd_bus |= D_LCD_BL; // Set BL bit |
wim | 22:35742ec80c24 | 1916 | } |
wim | 22:35742ec80c24 | 1917 | else { |
wim | 21:9eb628d9e164 | 1918 | _lcd_bus &= ~D_LCD_BL; // Reset BL bit |
wim | 22:35742ec80c24 | 1919 | } |
wim | 21:9eb628d9e164 | 1920 | |
wim | 21:9eb628d9e164 | 1921 | // write the new data to the SPI portexpander |
wim | 21:9eb628d9e164 | 1922 | _setCS(false); |
wim | 21:9eb628d9e164 | 1923 | _spi->write(_lcd_bus); |
wim | 30:033048611c01 | 1924 | _setCS(true); |
wim | 21:9eb628d9e164 | 1925 | } |
wim | 21:9eb628d9e164 | 1926 | |
wim | 21:9eb628d9e164 | 1927 | // Place the 4bit data on the databus |
wim | 21:9eb628d9e164 | 1928 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 21:9eb628d9e164 | 1929 | void TextLCD_SPI::_setData(int value) { |
wim | 21:9eb628d9e164 | 1930 | int data; |
wim | 21:9eb628d9e164 | 1931 | |
wim | 22:35742ec80c24 | 1932 | // Set bit by bit to support any mapping of expander portpins to LCD pins |
wim | 22:35742ec80c24 | 1933 | |
wim | 22:35742ec80c24 | 1934 | data = value & 0x0F; |
wim | 26:bd897a001012 | 1935 | if (data & 0x01) { |
wim | 22:35742ec80c24 | 1936 | _lcd_bus |= D_LCD_D4; // Set Databit |
wim | 26:bd897a001012 | 1937 | } |
wim | 26:bd897a001012 | 1938 | else { |
wim | 22:35742ec80c24 | 1939 | _lcd_bus &= ~D_LCD_D4; // Reset Databit |
wim | 26:bd897a001012 | 1940 | } |
wim | 26:bd897a001012 | 1941 | |
wim | 26:bd897a001012 | 1942 | if (data & 0x02) { |
wim | 22:35742ec80c24 | 1943 | _lcd_bus |= D_LCD_D5; // Set Databit |
wim | 26:bd897a001012 | 1944 | } |
wim | 26:bd897a001012 | 1945 | else { |
wim | 22:35742ec80c24 | 1946 | _lcd_bus &= ~D_LCD_D5; // Reset Databit |
wim | 26:bd897a001012 | 1947 | } |
wim | 26:bd897a001012 | 1948 | |
wim | 26:bd897a001012 | 1949 | if (data & 0x04) { |
wim | 22:35742ec80c24 | 1950 | _lcd_bus |= D_LCD_D6; // Set Databit |
wim | 26:bd897a001012 | 1951 | } |
wim | 26:bd897a001012 | 1952 | else { |
wim | 22:35742ec80c24 | 1953 | _lcd_bus &= ~D_LCD_D6; // Reset Databit |
wim | 26:bd897a001012 | 1954 | } |
wim | 26:bd897a001012 | 1955 | |
wim | 26:bd897a001012 | 1956 | if (data & 0x08) { |
wim | 22:35742ec80c24 | 1957 | _lcd_bus |= D_LCD_D7; // Set Databit |
wim | 26:bd897a001012 | 1958 | } |
wim | 26:bd897a001012 | 1959 | else { |
wim | 26:bd897a001012 | 1960 | _lcd_bus &= ~D_LCD_D7; // Reset Databit |
wim | 26:bd897a001012 | 1961 | } |
wim | 21:9eb628d9e164 | 1962 | |
wim | 22:35742ec80c24 | 1963 | // write the new data to the SPI portexpander |
wim | 22:35742ec80c24 | 1964 | _setCS(false); |
wim | 22:35742ec80c24 | 1965 | _spi->write(_lcd_bus); |
wim | 30:033048611c01 | 1966 | _setCS(true); |
wim | 21:9eb628d9e164 | 1967 | } |
wim | 21:9eb628d9e164 | 1968 | |
wim | 21:9eb628d9e164 | 1969 | // Set CS line. |
wim | 21:9eb628d9e164 | 1970 | // Only used for SPI bus |
wim | 21:9eb628d9e164 | 1971 | void TextLCD_SPI::_setCS(bool value) { |
wim | 21:9eb628d9e164 | 1972 | |
wim | 21:9eb628d9e164 | 1973 | if (value) { |
wim | 21:9eb628d9e164 | 1974 | _cs = 1; // Set CS pin |
wim | 21:9eb628d9e164 | 1975 | } |
wim | 22:35742ec80c24 | 1976 | else { |
wim | 21:9eb628d9e164 | 1977 | _cs = 0; // Reset CS pin |
wim | 22:35742ec80c24 | 1978 | } |
wim | 21:9eb628d9e164 | 1979 | } |
wim | 21:9eb628d9e164 | 1980 | |
wim | 23:d47f226efb24 | 1981 | //---------- End TextLCD_SPI ------------ |
wim | 22:35742ec80c24 | 1982 | |
wim | 22:35742ec80c24 | 1983 | |
wim | 25:6162b31128c9 | 1984 | //--------- Start TextLCD_SPI_N --------- |
Sissors | 24:fb3399713710 | 1985 | |
wim | 30:033048611c01 | 1986 | /** Create a TextLCD interface using a controller with a native SPI4 interface |
Sissors | 24:fb3399713710 | 1987 | * |
Sissors | 24:fb3399713710 | 1988 | * @param spi SPI Bus |
Sissors | 24:fb3399713710 | 1989 | * @param cs chip select pin (active low) |
wim | 25:6162b31128c9 | 1990 | * @param rs Instruction/data control line |
Sissors | 24:fb3399713710 | 1991 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 25:6162b31128c9 | 1992 | * @param bl Backlight control line (optional, default = NC) |
wim | 26:bd897a001012 | 1993 | * @param ctrl LCD controller (default = ST7032_3V3) |
wim | 25:6162b31128c9 | 1994 | */ |
wim | 25:6162b31128c9 | 1995 | TextLCD_SPI_N::TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type, PinName bl, LCDCtrl ctrl) : |
wim | 25:6162b31128c9 | 1996 | TextLCD_Base(type, ctrl), |
wim | 25:6162b31128c9 | 1997 | _spi(spi), |
wim | 25:6162b31128c9 | 1998 | _cs(cs), |
wim | 25:6162b31128c9 | 1999 | _rs(rs) { |
Sissors | 24:fb3399713710 | 2000 | |
Sissors | 24:fb3399713710 | 2001 | // Setup the spi for 8 bit data, low steady state clock, |
Sissors | 24:fb3399713710 | 2002 | // rising edge capture, with a 500KHz or 1MHz clock rate |
Sissors | 24:fb3399713710 | 2003 | _spi->format(8,0); |
Sissors | 24:fb3399713710 | 2004 | _spi->frequency(1000000); |
Sissors | 24:fb3399713710 | 2005 | |
Sissors | 24:fb3399713710 | 2006 | // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access. |
Sissors | 24:fb3399713710 | 2007 | if (bl != NC) { |
Sissors | 24:fb3399713710 | 2008 | _bl = new DigitalOut(bl); //Construct new pin |
Sissors | 24:fb3399713710 | 2009 | _bl->write(0); //Deactivate |
Sissors | 24:fb3399713710 | 2010 | } |
Sissors | 24:fb3399713710 | 2011 | else { |
Sissors | 24:fb3399713710 | 2012 | // No Hardware Backlight pin |
Sissors | 24:fb3399713710 | 2013 | _bl = NULL; //Construct dummy pin |
Sissors | 24:fb3399713710 | 2014 | } |
wim | 30:033048611c01 | 2015 | |
wim | 30:033048611c01 | 2016 | #if(0) |
wim | 30:033048611c01 | 2017 | //Sanity check |
wim | 30:033048611c01 | 2018 | switch (_ctrl) { |
wim | 30:033048611c01 | 2019 | case ST7032_3V3: |
wim | 30:033048611c01 | 2020 | case ST7032_5V: |
wim | 30:033048611c01 | 2021 | case WS0010: |
wim | 30:033048611c01 | 2022 | _init(); |
wim | 30:033048611c01 | 2023 | break; |
wim | 30:033048611c01 | 2024 | |
wim | 30:033048611c01 | 2025 | default: |
wim | 30:033048611c01 | 2026 | error("Error: LCD Controller type does not support native SPI4 interface\n\r"); |
wim | 30:033048611c01 | 2027 | } |
wim | 30:033048611c01 | 2028 | #endif |
wim | 30:033048611c01 | 2029 | |
wim | 30:033048611c01 | 2030 | //Sanity check |
wim | 30:033048611c01 | 2031 | if (_ctrl & LCD_C_SPI4) { |
wim | 30:033048611c01 | 2032 | _init(); |
wim | 30:033048611c01 | 2033 | } |
wim | 30:033048611c01 | 2034 | else { |
wim | 30:033048611c01 | 2035 | error("Error: LCD Controller type does not support native SPI4 interface\n\r"); |
wim | 30:033048611c01 | 2036 | } |
Sissors | 24:fb3399713710 | 2037 | } |
Sissors | 24:fb3399713710 | 2038 | |
wim | 25:6162b31128c9 | 2039 | TextLCD_SPI_N::~TextLCD_SPI_N() { |
Sissors | 24:fb3399713710 | 2040 | if (_bl != NULL) {delete _bl;} // BL pin |
Sissors | 24:fb3399713710 | 2041 | } |
Sissors | 24:fb3399713710 | 2042 | |
Sissors | 24:fb3399713710 | 2043 | // Not used in this mode |
wim | 25:6162b31128c9 | 2044 | void TextLCD_SPI_N::_setEnable(bool value) { |
Sissors | 24:fb3399713710 | 2045 | } |
Sissors | 24:fb3399713710 | 2046 | |
Sissors | 24:fb3399713710 | 2047 | // Set RS pin |
Sissors | 24:fb3399713710 | 2048 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 25:6162b31128c9 | 2049 | void TextLCD_SPI_N::_setRS(bool value) { |
Sissors | 24:fb3399713710 | 2050 | _rs = value; |
Sissors | 24:fb3399713710 | 2051 | } |
Sissors | 24:fb3399713710 | 2052 | |
Sissors | 24:fb3399713710 | 2053 | // Set BL pin |
wim | 25:6162b31128c9 | 2054 | void TextLCD_SPI_N::_setBL(bool value) { |
wim | 26:bd897a001012 | 2055 | if (_bl) { |
Sissors | 24:fb3399713710 | 2056 | _bl->write(value); |
wim | 26:bd897a001012 | 2057 | } |
Sissors | 24:fb3399713710 | 2058 | } |
Sissors | 24:fb3399713710 | 2059 | |
wim | 29:a3663151aa65 | 2060 | // Not used in this mode |
wim | 29:a3663151aa65 | 2061 | void TextLCD_SPI_N::_setData(int value) { |
wim | 29:a3663151aa65 | 2062 | } |
wim | 29:a3663151aa65 | 2063 | |
Sissors | 24:fb3399713710 | 2064 | // Write a byte using SPI |
wim | 25:6162b31128c9 | 2065 | void TextLCD_SPI_N::_writeByte(int value) { |
Sissors | 24:fb3399713710 | 2066 | _cs = 0; |
Sissors | 24:fb3399713710 | 2067 | wait_us(1); |
Sissors | 24:fb3399713710 | 2068 | _spi->write(value); |
Sissors | 24:fb3399713710 | 2069 | wait_us(1); |
Sissors | 24:fb3399713710 | 2070 | _cs = 1; |
Sissors | 24:fb3399713710 | 2071 | } |
wim | 30:033048611c01 | 2072 | |
wim | 25:6162b31128c9 | 2073 | //-------- End TextLCD_SPI_N ------------ |
wim | 21:9eb628d9e164 | 2074 | |
wim | 21:9eb628d9e164 | 2075 | |
wim | 21:9eb628d9e164 | 2076 | |
wim | 30:033048611c01 | 2077 | #if(0) |
wim | 30:033048611c01 | 2078 | //Code checked out on logic analyser. Not yet tested on hardware.. |
wim | 30:033048611c01 | 2079 | |
wim | 30:033048611c01 | 2080 | //-------- Start TextLCD_SPI_N_3_9 -------- |
wim | 30:033048611c01 | 2081 | |
wim | 30:033048611c01 | 2082 | /** Create a TextLCD interface using a controller with a native SPI3 9 bits interface |
wim | 30:033048611c01 | 2083 | * |
wim | 30:033048611c01 | 2084 | * @param spi SPI Bus |
wim | 30:033048611c01 | 2085 | * @param cs chip select pin (active low) |
wim | 30:033048611c01 | 2086 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 30:033048611c01 | 2087 | * @param bl Backlight control line (optional, default = NC) |
wim | 30:033048611c01 | 2088 | * @param ctrl LCD controller (default = AIP31068) |
wim | 30:033048611c01 | 2089 | */ |
wim | 30:033048611c01 | 2090 | TextLCD_SPI_N_3_9::TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) : |
wim | 30:033048611c01 | 2091 | TextLCD_Base(type, ctrl), |
wim | 30:033048611c01 | 2092 | _spi(spi), |
wim | 30:033048611c01 | 2093 | _cs(cs) { |
wim | 30:033048611c01 | 2094 | |
wim | 30:033048611c01 | 2095 | // Setup the spi for 9 bit data, low steady state clock, |
wim | 30:033048611c01 | 2096 | // rising edge capture, with a 500KHz or 1MHz clock rate |
wim | 30:033048611c01 | 2097 | _spi->format(9,0); |
wim | 30:033048611c01 | 2098 | _spi->frequency(1000000); |
wim | 30:033048611c01 | 2099 | |
wim | 30:033048611c01 | 2100 | // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access. |
wim | 30:033048611c01 | 2101 | if (bl != NC) { |
wim | 30:033048611c01 | 2102 | _bl = new DigitalOut(bl); //Construct new pin |
wim | 30:033048611c01 | 2103 | _bl->write(0); //Deactivate |
wim | 30:033048611c01 | 2104 | } |
wim | 30:033048611c01 | 2105 | else { |
wim | 30:033048611c01 | 2106 | // No Hardware Backlight pin |
wim | 30:033048611c01 | 2107 | _bl = NULL; //Construct dummy pin |
wim | 30:033048611c01 | 2108 | } |
wim | 30:033048611c01 | 2109 | |
wim | 30:033048611c01 | 2110 | //Sanity check |
wim | 30:033048611c01 | 2111 | if (_ctrl & LCD_C_SPI3_9) { |
wim | 30:033048611c01 | 2112 | _init(); |
wim | 30:033048611c01 | 2113 | } |
wim | 30:033048611c01 | 2114 | else { |
wim | 30:033048611c01 | 2115 | error("Error: LCD Controller type does not support native SPI3 9 bits interface\n\r"); |
wim | 30:033048611c01 | 2116 | } |
wim | 30:033048611c01 | 2117 | } |
wim | 30:033048611c01 | 2118 | |
wim | 30:033048611c01 | 2119 | TextLCD_SPI_N_3_9::~TextLCD_SPI_N_3_9() { |
wim | 30:033048611c01 | 2120 | if (_bl != NULL) {delete _bl;} // BL pin |
wim | 30:033048611c01 | 2121 | } |
wim | 30:033048611c01 | 2122 | |
wim | 30:033048611c01 | 2123 | // Not used in this mode |
wim | 30:033048611c01 | 2124 | void TextLCD_SPI_N_3_9::_setEnable(bool value) { |
wim | 30:033048611c01 | 2125 | } |
wim | 30:033048611c01 | 2126 | |
wim | 30:033048611c01 | 2127 | // Set RS pin |
wim | 30:033048611c01 | 2128 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 30:033048611c01 | 2129 | void TextLCD_SPI_N_3_9::_setRS(bool value) { |
wim | 30:033048611c01 | 2130 | // The controlbits define the meaning of the next byte. This next byte can either be data or command. |
wim | 30:033048611c01 | 2131 | // b8 b7...........b0 |
wim | 30:033048611c01 | 2132 | // RS command or data |
wim | 30:033048611c01 | 2133 | // |
wim | 30:033048611c01 | 2134 | // RS=1 means that next byte is data, RS=0 means that next byte is command |
wim | 30:033048611c01 | 2135 | // |
wim | 30:033048611c01 | 2136 | |
wim | 30:033048611c01 | 2137 | if (value) { |
wim | 30:033048611c01 | 2138 | _controlbyte = 0x01; // Next byte is data |
wim | 30:033048611c01 | 2139 | } |
wim | 30:033048611c01 | 2140 | else { |
wim | 30:033048611c01 | 2141 | _controlbyte = 0x00; // Next byte is command |
wim | 30:033048611c01 | 2142 | } |
wim | 30:033048611c01 | 2143 | |
wim | 30:033048611c01 | 2144 | } |
wim | 30:033048611c01 | 2145 | |
wim | 30:033048611c01 | 2146 | // Set BL pin |
wim | 30:033048611c01 | 2147 | void TextLCD_SPI_N_3_9::_setBL(bool value) { |
wim | 30:033048611c01 | 2148 | if (_bl) { |
wim | 30:033048611c01 | 2149 | _bl->write(value); |
wim | 30:033048611c01 | 2150 | } |
wim | 30:033048611c01 | 2151 | } |
wim | 30:033048611c01 | 2152 | |
wim | 30:033048611c01 | 2153 | // Not used in this mode |
wim | 30:033048611c01 | 2154 | void TextLCD_SPI_N_3_9::_setData(int value) { |
wim | 30:033048611c01 | 2155 | } |
wim | 30:033048611c01 | 2156 | |
wim | 30:033048611c01 | 2157 | // Write a byte using SPI3 9 bits mode |
wim | 30:033048611c01 | 2158 | void TextLCD_SPI_N_3_9::_writeByte(int value) { |
wim | 30:033048611c01 | 2159 | _cs = 0; |
wim | 30:033048611c01 | 2160 | wait_us(1); |
wim | 30:033048611c01 | 2161 | _spi->write( (_controlbyte << 8) | (value & 0xFF)); |
wim | 30:033048611c01 | 2162 | wait_us(1); |
wim | 30:033048611c01 | 2163 | _cs = 1; |
wim | 30:033048611c01 | 2164 | } |
wim | 30:033048611c01 | 2165 | |
wim | 30:033048611c01 | 2166 | //------- End TextLCD_SPI_N_3_9 ----------- |
wim | 30:033048611c01 | 2167 | #endif |
wim | 21:9eb628d9e164 | 2168 | |
wim | 21:9eb628d9e164 | 2169 | |
wim | 30:033048611c01 | 2170 | #if(0) |
wim | 30:033048611c01 | 2171 | //Code checked out on logic analyser. Not yet tested on hardware.. |
wim | 30:033048611c01 | 2172 | |
wim | 30:033048611c01 | 2173 | //------- Start TextLCD_SPI_N_3_10 -------- |
wim | 30:033048611c01 | 2174 | |
wim | 30:033048611c01 | 2175 | /** Create a TextLCD interface using a controller with a native SPI3 10 bits interface |
wim | 30:033048611c01 | 2176 | * |
wim | 30:033048611c01 | 2177 | * @param spi SPI Bus |
wim | 30:033048611c01 | 2178 | * @param cs chip select pin (active low) |
wim | 30:033048611c01 | 2179 | * @param type Sets the panel size/addressing mode (default = LCD16x2) |
wim | 30:033048611c01 | 2180 | * @param bl Backlight control line (optional, default = NC) |
wim | 30:033048611c01 | 2181 | * @param ctrl LCD controller (default = AIP31068) |
wim | 30:033048611c01 | 2182 | */ |
wim | 30:033048611c01 | 2183 | TextLCD_SPI_N_3_10::TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) : |
wim | 30:033048611c01 | 2184 | TextLCD_Base(type, ctrl), |
wim | 30:033048611c01 | 2185 | _spi(spi), |
wim | 30:033048611c01 | 2186 | _cs(cs) { |
wim | 30:033048611c01 | 2187 | |
wim | 30:033048611c01 | 2188 | // Setup the spi for 10 bit data, low steady state clock, |
wim | 30:033048611c01 | 2189 | // rising edge capture, with a 500KHz or 1MHz clock rate |
wim | 30:033048611c01 | 2190 | _spi->format(10,0); |
wim | 30:033048611c01 | 2191 | _spi->frequency(1000000); |
wim | 30:033048611c01 | 2192 | |
wim | 30:033048611c01 | 2193 | // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access. |
wim | 30:033048611c01 | 2194 | if (bl != NC) { |
wim | 30:033048611c01 | 2195 | _bl = new DigitalOut(bl); //Construct new pin |
wim | 30:033048611c01 | 2196 | _bl->write(0); //Deactivate |
wim | 30:033048611c01 | 2197 | } |
wim | 30:033048611c01 | 2198 | else { |
wim | 30:033048611c01 | 2199 | // No Hardware Backlight pin |
wim | 30:033048611c01 | 2200 | _bl = NULL; //Construct dummy pin |
wim | 30:033048611c01 | 2201 | } |
wim | 30:033048611c01 | 2202 | |
wim | 30:033048611c01 | 2203 | //Sanity check |
wim | 30:033048611c01 | 2204 | if (_ctrl & LCD_C_SPI3_10) { |
wim | 30:033048611c01 | 2205 | _init(); |
wim | 30:033048611c01 | 2206 | } |
wim | 30:033048611c01 | 2207 | else { |
wim | 30:033048611c01 | 2208 | error("Error: LCD Controller type does not support native SPI3 10 bits interface\n\r"); |
wim | 30:033048611c01 | 2209 | } |
wim | 30:033048611c01 | 2210 | } |
wim | 30:033048611c01 | 2211 | |
wim | 30:033048611c01 | 2212 | TextLCD_SPI_N_3_10::~TextLCD_SPI_N_3_10() { |
wim | 30:033048611c01 | 2213 | if (_bl != NULL) {delete _bl;} // BL pin |
wim | 30:033048611c01 | 2214 | } |
wim | 30:033048611c01 | 2215 | |
wim | 30:033048611c01 | 2216 | // Not used in this mode |
wim | 30:033048611c01 | 2217 | void TextLCD_SPI_N_3_10::_setEnable(bool value) { |
wim | 30:033048611c01 | 2218 | } |
wim | 30:033048611c01 | 2219 | |
wim | 30:033048611c01 | 2220 | // Set RS pin |
wim | 30:033048611c01 | 2221 | // Used for mbed pins, I2C bus expander or SPI shiftregister |
wim | 30:033048611c01 | 2222 | void TextLCD_SPI_N_3_10::_setRS(bool value) { |
wim | 30:033048611c01 | 2223 | // The controlbits define the meaning of the next byte. This next byte can either be data or command. |
wim | 30:033048611c01 | 2224 | // b9 b8 b7...........b0 |
wim | 30:033048611c01 | 2225 | // RS RW command or data |
wim | 30:033048611c01 | 2226 | // |
wim | 30:033048611c01 | 2227 | // RS=1 means that next byte is data, RS=0 means that next byte is command |
wim | 30:033048611c01 | 2228 | // RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib) |
wim | 30:033048611c01 | 2229 | // |
wim | 30:033048611c01 | 2230 | |
wim | 30:033048611c01 | 2231 | if (value) { |
wim | 30:033048611c01 | 2232 | _controlbyte = 0x02; // Next byte is data |
wim | 30:033048611c01 | 2233 | } |
wim | 30:033048611c01 | 2234 | else { |
wim | 30:033048611c01 | 2235 | _controlbyte = 0x00; // Next byte is command |
wim | 30:033048611c01 | 2236 | } |
wim | 30:033048611c01 | 2237 | |
wim | 30:033048611c01 | 2238 | } |
wim | 30:033048611c01 | 2239 | |
wim | 30:033048611c01 | 2240 | // Set BL pin |
wim | 30:033048611c01 | 2241 | void TextLCD_SPI_N_3_10::_setBL(bool value) { |
wim | 30:033048611c01 | 2242 | if (_bl) { |
wim | 30:033048611c01 | 2243 | _bl->write(value); |
wim | 30:033048611c01 | 2244 | } |
wim | 30:033048611c01 | 2245 | } |
wim | 30:033048611c01 | 2246 | |
wim | 30:033048611c01 | 2247 | // Not used in this mode |
wim | 30:033048611c01 | 2248 | void TextLCD_SPI_N_3_10::_setData(int value) { |
wim | 30:033048611c01 | 2249 | } |
wim | 30:033048611c01 | 2250 | |
wim | 30:033048611c01 | 2251 | // Write a byte using SPI3 10 bits mode |
wim | 30:033048611c01 | 2252 | void TextLCD_SPI_N_3_10::_writeByte(int value) { |
wim | 30:033048611c01 | 2253 | _cs = 0; |
wim | 30:033048611c01 | 2254 | wait_us(1); |
wim | 30:033048611c01 | 2255 | _spi->write( (_controlbyte << 8) | (value & 0xFF)); |
wim | 30:033048611c01 | 2256 | wait_us(1); |
wim | 30:033048611c01 | 2257 | _cs = 1; |
wim | 30:033048611c01 | 2258 | } |
wim | 30:033048611c01 | 2259 | |
wim | 30:033048611c01 | 2260 | //------- End TextLCD_SPI_N_3_10 ---------- |
wim | 30:033048611c01 | 2261 | #endif |