24112016
Dependents: zz_Transmit 2017charger_16ampONLY 2017charger_16_32_Relay
Fork of Watchdog by
Watchdog.cpp
- Committer:
- jamesfryar
- Date:
- 2016-11-24
- Revision:
- 7:562d4888be2f
- Parent:
- 5:2dad2a78ffbd
File content as of revision 7:562d4888be2f:
/// @file Watchdog.cpp provides the interface to the Watchdog module /// /// This provides basic Watchdog service for the mbed. You can configure /// various timeout intervals that meet your system needs. Additionally, /// it is possible to identify if the Watchdog was the cause of any /// system restart. /// /// Adapted from Simon's Watchdog code from http://mbed.org/forum/mbed/topic/508/ /// /// @note Copyright © 2011 by Smartware Computing, all rights reserved. /// This software may be used to derive new software, as long as /// this copyright statement remains in the source file. /// @author David Smart /// #include "mbed.h" #include "Watchdog.h" #if defined( TARGET_LPC1768 ) /// Watchdog gets instantiated at the module level Watchdog::Watchdog() { wdreset = (LPC_WDT->WDMOD >> 2) & 1; // capture the cause of the previous reset } /// Load timeout value in watchdog timer and enable void Watchdog::Configure(float s) { LPC_WDT->WDCLKSEL = 0x1; // Set CLK src to PCLK uint32_t clk = SystemCoreClock / 16; // WD has a fixed /4 prescaler, PCLK default is /4 LPC_WDT->WDTC = (uint32_t)(s * (float)clk); LPC_WDT->WDMOD = 0x3; // Enabled and Reset Service(); } /// "Service", "kick" or "feed" the dog - reset the watchdog timer /// by writing this required bit pattern void Watchdog::Service() { LPC_WDT->WDFEED = 0xAA; LPC_WDT->WDFEED = 0x55; } /// get the flag to indicate if the watchdog causes the reset bool Watchdog::WatchdogCausedReset() { return wdreset; } #elif defined( TARGET_LPC4088 ) // from Gesotec Gesotec /// Watchdog gets instantiated at the module level Watchdog::Watchdog() { wdreset = (LPC_WDT->MOD >> 2) & 1; // capture the cause of the previous reset } /// Load timeout value in watchdog timer and enable void Watchdog::Configure(float s) { //LPC_WDT->CLKSEL = 0x1; // Set CLK src to PCLK uint32_t clk = 500000 / 4; // WD has a fixed /4 prescaler, and a 500khz oscillator LPC_WDT->TC = (uint32_t)(s * (float)clk); LPC_WDT->MOD = 0x3; // Enabled and Reset Service(); } /// "Service", "kick" or "feed" the dog - reset the watchdog timer /// by writing this required bit pattern void Watchdog::Service() { LPC_WDT->FEED = 0xAA; LPC_WDT->FEED = 0x55; } /// get the flag to indicate if the watchdog causes the reset bool Watchdog::WatchdogCausedReset() { return wdreset; } #elif defined( TARGET_STM ) // Derived from Chau Vo /// Watchdog gets instantiated at the module level Watchdog::Watchdog() { wdreset = (RCC->CSR & (1<<29)) ? true : false; // read the IWDGRSTF (Independent WD, not the windows WD) } /// Load timeout value in watchdog timer and enable void Watchdog::Configure(float pr) { // http://www.st.com/web/en/resource/technical/document/reference_manual/CD00171190.pdf IWDG->KR = 0x5555; // enable write to PR, RLR IWDG->PR = pr; // Init prescaler, page 486 Reference Manual IWDG->RLR = 0xFFF; // Init RLR IWDG->KR = 0xAAAA; // Reload the watchdog IWDG->KR = 0xCCCC; // Starts the WD } /// "Service", "kick" or "feed" the dog - reset the watchdog timer void Watchdog::Service() { IWDG->KR = 0xAAAA; } /// get the flag to indicate if the watchdog causes the reset bool Watchdog::WatchdogCausedReset() { if (wdreset) { RCC->CSR |= (1<<24); // clear reset flag } return wdreset; } #endif