![](/media/cache/group/default_image.jpg.50x50_q85.jpg)
Callum and Adel's changes on 12/02/19
Dependencies: Crypto
Diff: main.cpp
- Revision:
- 26:fb6151e5907d
- Parent:
- 25:995865498aee
- Child:
- 27:ce05fed3c1ea
diff -r 995865498aee -r fb6151e5907d main.cpp --- a/main.cpp Sat Mar 16 17:39:22 2019 +0000 +++ b/main.cpp Sat Mar 16 18:19:08 2019 +0000 @@ -1,37 +1,54 @@ -#include "SHA256.h" +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~INCLUDES~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include "mbed.h" -// #include <iostream> -// #include "rtos.h" +#include "Crypto.h" // Library used for Bitcoin mining. +#include "rtos.h" // Real time operating system library for threads etc. + + + + +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~DEFINITIONS~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -/*TODO: -Change -Indx -newCmd -MAXCMDLENGTH -*/ +//~~~~~~~~~~~~~~Photointerrupter pins~~~~~~~~~~~~~~ +#define I1pin D2 +#define I2pin D11 +#define I3pin D12 -//Photointerrupter input pins -#define I1pin D3 -#define I2pin D6 -#define I3pin D5 + +////~~~~~~~~~~Incremental encoder pins//~~~~~~~~~~~ +#define CHA D7 +#define CHB D8 + -//Incremental encoder input pins -#define CHApin D12 -#define CHBpin D11 +//~~Motor Drive output pins~/Mask in output byte~~~ +#define L1Lpin D4 //0x01 +#define L1Hpin D5 //0x02 +#define L2Lpin D3 //0x04 +#define L2Hpin D6 //0x08 +#define L3Lpin D9 //0x10 +#define L3Hpin D10 //0x20 + + +//~~~~~~~~Maximum command length accepted~~~~~~~~~~~ +#define MAXCMDLENGTH 18 + -//Motor Drive output pins //Mask in output byte -#define L1Lpin D1 //0x01 -#define L1Hpin A3 //0x02 -#define L2Lpin D0 //0x04 -#define L2Hpin A6 //0x08 -#define L3Lpin D10 //0x10 -#define L3Hpin D2 //0x20 +//~~~~~~~~Maximum PWM allowed due to 50% restriction +#define MAXPWM 1000 + + +//~~~~~~~Enumeration of message identifiers~~~~~~~~~ +enum MsgCode {Msg_motorState, Msg_hashRate, Msg_nonceMatch, Msg_keyAdded, Msg_velocityOut, Msg_velocityIn, Msg_positionIn, Msg_positionOut, Msg_rotations, Msg_torque, Msg_error}; + -#define PWMpin D9 +//~~~~~~~New data type to carry the messages~~~~~~~~ +typedef struct { + MsgCode code; + uint32_t data; +} message_t; -//Motor current sense -#define MCSPpin A1 -#define MCSNpin A0 + + +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Global Variables~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Mapping from sequential drive states to motor phase outputs /* @@ -45,546 +62,451 @@ 6 - - - 7 - - - */ -//Drive state to output table + + +//~~~~~~~~~~~Drive state to output table~~~~~~~~~~~~ const int8_t driveTable[] = {0x12,0x18,0x09,0x21,0x24,0x06,0x00,0x00}; -//Mapping from interrupter inputs to sequential rotor states. 0x00 and 0x07 are not valid -const int8_t stateMap[] = {0x07,0x05,0x03,0x04,0x01,0x00,0x02,0x07}; -//const int8_t stateMap[] = {0x07,0x01,0x03,0x02,0x05,0x00,0x04,0x07}; //Alternative if phase order of input or drive is reversed + +//Mapping from interrupter inputs to sequential rotor states. 0x00 and 0x07 are not valid. +const int8_t stateMap[] = {0x07,0x05,0x03,0x04,0x01,0x00,0x02,0x07}; +//Alternative if phase order of input or drive is reversed. +//const int8_t stateMap[] = {0x07,0x01,0x03,0x02,0x05,0x00,0x04,0x07}; + -//Phase lead to make motor spin -const int8_t lead = 2; //2 for forwards, -2 for backwards +////~~~~~~~~~Phase lead to make motor spin~~~~~~~~~ +int8_t lead = 2; //2 for forwards, -2 for backwards + -//Status LED +//~~~~~~~~~~~~~~~~~~Rotor states~~~~~~~~~~~~~~~~~~~ +int8_t orState = 0; // Rotor offset at motor state 0 +volatile int8_t intStateOld = 0; // Motor old state. Type is volatile since + // its value may change in ISR + +//~~~~~~~~~~~~~~~~~~~Status LED~~~~~~~~~~~~~~~~~~~~ DigitalOut led1(LED1); -//Photointerrupter inputs + +//~~~~~~~~~~~~~Photointerrupter inputs~~~~~~~~~~~~~ InterruptIn I1(I1pin); InterruptIn I2(I2pin); InterruptIn I3(I3pin); -//Motor Drive outputs -DigitalOut L1L(L1Lpin); + +//~~~~~~~~~~~~~~Motor Drive outputs~~~~~~~~~~~~~~~~ +PwmOut L1L(L1Lpin); DigitalOut L1H(L1Hpin); -DigitalOut L2L(L2Lpin); +PwmOut L2L(L2Lpin); DigitalOut L2H(L2Hpin); -DigitalOut L3L(L3Lpin); +PwmOut L3L(L3Lpin); DigitalOut L3H(L3Hpin); -PwmOut pwmCtrl(PWMpin); -uint8_t stateCount[3]; -uint8_t theStates[3]; - -class Comm /*: public T_*/{ - -public: - - Thread t_comm_out; - Thread t_motor_ctrl; - // Thread *p_motor_ctrl; - - bool _RUN; - - RawSerial pc; - // Queue<void, 8> inCharQ; // Input Character Queue +//~Dats structure to pass information between threads~ +Mail<message_t,16> outMessages; - static const char MsgChar[11]; - - uint8_t MAXCMDLENGTH; +//~~~~~~~~~~~~~~~~~~~~Queue~~~~~~~~~~~~~~~~~~~~~~~~ +Queue<void, 8> inCharQ; - volatile uint8_t cmdIndx; - volatile uint8_t inCharQIdx; - - volatile uint32_t motorPower; // motor toque - volatile float targetVel; - volatile float targetRot; - - enum msgType {motorState, posIn, velIn, posOut, velOut, - hashRate, keyAdded, nonceMatch, - - torque, rotations, - - error}; +//~~~~~~~~~~~~Serial command buffer~~~~~~~~~~~~~~~ +char newCmd[MAXCMDLENGTH]; +volatile uint8_t cmdIndx = 0; - typedef struct { - msgType type; - uint32_t message; - } msg; - - Mail<msg, 32> mailStack; - void serialISR(){ - if (pc.readable()) { - char newChar = pc.getc(); - // inCharQ.put((void*)newChar); // void* = pointer to an unknown type that cannot be dereferenced +//~~~~~~~~~~Key to be passed for mining~~~~~~~~~~~ +volatile uint64_t newKey; // Key +Mutex newKey_mutex; // Restrict access to prevent deadlock. - if (inCharQIdx == (MAXCMDLENGTH)) { - inCharQ[MAXCMDLENGTH] = '\0'; // force the string to have an end character - putMessage(error, 1); - inCharQIdx = 0; // reset buffer index - // pc.putc('\r'); // carriage return moves to the start of the line - // for (int i = 0; i < MAXCMDLENGTH; ++i) - // { - // inCharQ[i] = ' '; - // pc.putc(' '); - // } - // pc.putc('\r'); // carriage return moves to the start of the line - } - else{ - if(newChar != '\r'){ //While the command is not over, - inCharQ[inCharQIdx] = newChar; //save input character and - inCharQIdx++; //advance index - pc.putc(newChar); - } - else{ - inCharQ[inCharQIdx] = '\0'; //When the command is finally over, - strncpy(newCmd, inCharQ, MAXCMDLENGTH); // Will copy 18 characters from inCharQ to newCmd - cmdParser(); //parse the command for decoding. - for (int i = 0; i < MAXCMDLENGTH; ++i) // reset buffer - inCharQ[i] = ' '; - inCharQIdx = 0; // reset index - } - } - } +//~~~~~~~~~~~~~~Initial conditions~~~~~~~~~~~~~~~~ +volatile uint32_t motorPower = 300; // motor toque +volatile float targetVel = 45.0; +volatile float targetRot = 459.0; - } - - /*void commInFn() { - // if (_RUN) +//~~~~~~~~~~~Motor position variable~~~~~~~~~~~~~~ +volatile int32_t motorPos; // Motor position updated by interrupt. - while (_RUN) { - osEvent newEvent = inCharQ.get(); - uint8_t newChar = (uint8_t)(newEvent.value.p); // size_t to type cast the 64bit pointer properly - pc.putc(newChar); - if(cmdIndx >= MAXCMDLENGTH){ //Make sure there is no overflow in comand. - cmdIndx = 0; - putMessage(error, 1); - } - else{ - if(newChar != '\r'){ //While the command is not over, - newCmd[cmdIndx] = newChar; //save input character and - cmdIndx++; //advance index - } - else{ - newCmd[cmdIndx] = '\0'; //When the command is finally over, - cmdIndx = 0; //reset index and - cmdParser(); //parse the command for decoding. - } - } - } - }*/ - void returnCursor() { - pc.putc('>'); - for (int i = 0; i < inCharQIdx; ++i) // reset cursor position - pc.putc(inCharQ[i]); - // for (int i = inCharQIdx; i < MAXCMDLENGTH; ++i) // fill remaining with blanks - // pc.putc(' '); - // pc.putc('<'); - } +//~~~~~~~~~~Serial port connection~~~~~~~~~~~~~~~~ +RawSerial pc(SERIAL_TX, SERIAL_RX); - void cmdParser(){ - switch(newCmd[0]) { - case 'K': //(MsgChar[keyAdded]):// - newKey_mutex.lock(); //Ensure there is no deadlock - sscanf(newCmd, "K%x", &newKey); //Find desired the Key code - putMessage(keyAdded, newKey); //Print it out - newKey_mutex.unlock(); - break; - case 'V': //(MsgChar[velIn]):// - sscanf(newCmd, "V%f", &targetVel); //Find desired the target velocity - putMessage(velIn, targetVel); //Print it out - break; - case 'R': //(MsgChar[posIn]):// - sscanf(newCmd, "R%f", &targetRot); //Find desired target rotation - putMessage(posIn, targetRot); //Print it out - break; - case 'T': //(MsgChar[torque]):// - sscanf(newCmd, "T%d", &motorPower); //Find desired target torque - putMessage(torque, motorPower); //Print it out - break; - default: break; - } - } - - //~~~~~Decode messages to print on serial port~~~~~ - void commOutFn() { - while (_RUN) { - osEvent newEvent = mailStack.get(); - msg *pMessage = (msg *) newEvent.value.p; - //Case switch to choose serial output based on incoming message - switch (pMessage->type) { - case motorState: - pc.printf("The motor is currently in state %x\n\r", pMessage->message); - break; - case hashRate: - pc.printf("\r>%s< Mining: %.4u Hash/s\r", inCharQ, (uint32_t) pMessage->message); - returnCursor(); - break; - case nonceMatch: - pc.printf("\r>%s< Nonce found: %x\r", inCharQ, pMessage->message); - returnCursor(); - break; - case keyAdded: - pc.printf("New Key Added:\t0x%016x\n\r", pMessage->message); - break; - case torque: - pc.printf("Motor Torque set to:\t%d\n\r", pMessage->message); - break; - case velIn: - pc.printf("Target Velocity set to:\t%.2f\n\r", targetVel); - break; - case velOut: - pc.printf("Current Velocity:\t%.2f\n\r", \ - (float) ((int32_t) pMessage->message / 6)); - break; - case posIn: - pc.printf("Target Rotation set to:\t%.2f\n\r", \ - (float) ((int32_t) pMessage->message / 6)); - break; - case posOut: - pc.printf("Current Position:\t%.2f\n\r", \ - (float) ((int32_t) pMessage->message / 6)); - break; - case error: - pc.printf("\r>%s< Debugging position:%x\n\r", inCharQ, pMessage->message); - for (int i = 0; i < MAXCMDLENGTH; ++i) // reset buffer - inCharQ[i] = ' '; - break; - default: - pc.printf("Unknown Error. Message: %x\n\r", pMessage->message); - break; - } - mailStack.free(pMessage); - } - } + + +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Threads~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - // attach_us -> runs funtion every 100ms - void motorCtrlFn() { - Ticker motorCtrlTicker; - motorCtrlTicker.attach_us(callback(this,&Comm::motorCtrlTick), 1e5); - uint8_t cpyStateCount[3]; - uint8_t cpyCurrentState; - while (_RUN) { - t_motor_ctrl.signal_wait((int32_t)0x1); - core_util_critical_section_enter(); - //Access shared variables here - std::copy(stateCount, stateCount+3, cpyStateCount); - // TODO: A thing yes - cpyCurrentState = 0; - for (int i = 0; i < 3; ++i) { - stateCount[i] = 0; - } - core_util_critical_section_exit(); - - uint8_t iterElementMax = std::max_element(cpyStateCount, cpyStateCount+3) - cpyStateCount; - - int16_t ting[2] = {5,1}; // 360,60 (for degrees), 5,1 (for states) - int16_t totalDegrees = ting[0] * cpyStateCount[iterElementMax]; - int16_t stateDiff = theStates[iterElementMax]-cpyCurrentState; - if (stateDiff >= 0) { - totalDegrees = totalDegrees + (ting[1]* stateDiff); - } else { - totalDegrees = totalDegrees + (ting[1]*stateDiff*-1); - } - pc.printf("%u,%u,%u,%u. %.6i \r", iterElementMax, cpyStateCount[0],cpyStateCount[1],cpyStateCount[2], (totalDegrees*10)); - - //~~~~~Speed controller~~~~~~ - /* - sError = (targetVel * 6) - abs(totalDegrees)*10; //Read global variable targetVel updated by interrupt and calculate error between target and reality - int32_t Ys; //Initialise controller output Ys - if (sError == -abs(velocity)) { //Check if user entered V0, - Ys = MAXPWM; //and set the output to maximum as specified - } else { - Ys = (int)(Kp1 * sError); //If the user didn't enter V0 implement controller transfer function: Ys = Kp * (s -|v|) where, - } - */ - } - - } - - void motorCtrlTick(){ - t_motor_ctrl.signal_set(0x1); - } +Thread commOutT(osPriorityAboveNormal,1024); // Output to serial port. +Thread commInT(osPriorityAboveNormal,1024); // Input from serial port. +Thread motorCtrlT(osPriorityNormal,1024); // Motor control thread. - //TODO: stop function, maybe use parent de-constructor - //void stop_comm{} - // public: - - volatile uint64_t newKey; // hash key - Mutex newKey_mutex; // Restrict access to prevent deadlock. - Comm() : pc(SERIAL_TX, SERIAL_RX), - t_comm_out(osPriorityAboveNormal, 1024), - t_motor_ctrl(osPriorityAboveNormal2, 1024) - { // inherit from the RawSerial constructor - - pc.printf("%s\n\r", "Welcome" ); - MAXCMDLENGTH = 18; +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Function declarations~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - // reset buffer - // MbedOS prints 'Embedded Systems are fun and do awesome things!' - // if you print a null terminator - pc.putc('>'); - for (int i = 0; i < MAXCMDLENGTH; ++i) { - inCharQ[i] = '.'; - pc.putc('.'); - } - pc.putc('<'); - pc.putc('\r'); +void motorOut(int8_t driveState, uint32_t pw); +inline int8_t readRotorState(); +int8_t motorHome(); +void motorISR(); +void cmdParser(); +void commOutFn(); +void putMessage(MsgCode code, uint32_t data); +void serialISR(); +void commInFn(); +void motorCtrlFn(); +void motorCtrlTick(); - inCharQ[MAXCMDLENGTH] = '\0'; - strncpy(newCmd, inCharQ, MAXCMDLENGTH); - - cmdIndx = 0; - - inCharQIdx = 0; - // inCharQIdx = MAXCMDLENGTH-1; - pc.attach(callback(this, &Comm::serialISR)); +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Main~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - // Thread t_comm_in(osPriorityAboveNormal, 1024); - // Thread t_comm_out(osPriorityAboveNormal, 1024); - // Thread t_motor_ctrl(osPriorityAboveNormal, 1024); +int main() { + //~~~~~~~~~~~~~Initial serial prints~~~~~~~~~~~~~ + pc.printf("\n\r\n\r Hello \n\r"); + pc.printf("\n\r\n\rGroup: IndiCorp \n\r"); + pc.printf("Initial hardcoded conditions:\n\r"); + pc.printf("\tVelocity:\t%f\n\r", targetVel); + pc.printf("\tRotation:\t%f\n\r", targetRot); + - motorPower = 300; - targetVel = 45.0; - targetRot = 459.0; - - - - /*MsgChar = {'m', 'R', 'V', 'r', 'v', - - 'h', 'K', 'n', + //~~~~~~~~~~~~~~~Start all threads~~~~~~~~~~~~~~~ + commOutT.start(commOutFn); + commInT.start(commInFn); + motorCtrlT.start(motorCtrlFn); + + + //~~~~~~~~~~~~~~Attach ISR to serial~~~~~~~~~~~~ + pc.attach(&serialISR); + + + //~~~~~~~~Attach ISR to photointerrupters~~~~~~~ + I1.rise(&motorISR); + I1.fall(&motorISR); + I2.rise(&motorISR); + I2.fall(&motorISR); + I3.rise(&motorISR); + I3.fall(&motorISR); + - 'T', 'r', - - 'e'};*/ - } - + //~~~~~~~~~Declare Bitcoin Variables~~~~~~~~~~~ + SHA256 sha256Inst; + uint8_t sequence[] = {\ + 0x45,0x6D,0x62,0x65,0x64,0x64,0x65,0x64,\ + 0x20,0x53,0x79,0x73,0x74,0x65,0x6D,0x73,\ + 0x20,0x61,0x72,0x65,0x20,0x66,0x75,0x6E,\ + 0x20,0x61,0x6E,0x64,0x20,0x64,0x6F,0x20,\ + 0x61,0x77,0x65,0x73,0x6F,0x6D,0x65,0x20,\ + 0x74,0x68,0x69,0x6E,0x67,0x73,0x21,0x20,\ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 + }; + uint64_t* key = (uint64_t*)((int)sequence + 48); + uint64_t* nonce = (uint64_t*)((int)sequence + 56); + uint8_t hash[32]; + uint32_t sequenceLength = 64; + uint32_t hashCounter = 0; + Timer bitcoinTimer; - void putMessage(msgType type, uint32_t message){ - msg *p_msg = mailStack.alloc(); - p_msg->type = type; - p_msg->message = message; - mailStack.put(p_msg); - } + + //Set PWM period to max 2000 due to hardware limitations + L1L.period_us(2000); + L2L.period_us(2000); + L3L.period_us(2000); + - void start_comm(){ - _RUN = true; + /* Run the motor synchronisation: orState is subtracted from future rotor + state inputs to align rotor and motor states */ + orState = motorHome(); + pc.printf("Rotor origin: %x\n\r", orState); //Print state for debugging purposes. + + + //~~~~~~Give the motor a kick to begin~~~~~~~~ + motorISR(); + - // reset buffer - // MbedOS prints 'Embedded Systems are fun and do awesome things!' - // if you print a null terminator - pc.putc('>'); - for (int i = 0; i < MAXCMDLENGTH; ++i) { - inCharQ[i] = '.'; - pc.putc('.'); + //~~~~~~~~~~~~~~~~Mining loop~~~~~~~~~~~~~~~~~ + bitcoinTimer.start(); // start timer + while (1) { + newKey_mutex.lock(); + (*key) = newKey; + newKey_mutex.unlock(); + sha256Inst.computeHash(hash, sequence, sequenceLength); + hashCounter++; + if ((hash[0]==0) && (hash[1]==0)){ + putMessage(Msg_nonceMatch, *nonce); // matching nonce 7 } - pc.putc('<'); - pc.putc('\r'); - - inCharQ[MAXCMDLENGTH] = '\0'; - strncpy(newCmd, inCharQ, MAXCMDLENGTH); - - // returnCursor(); - // t_comm_in.start(callback(this, &Comm::commInFn)); - // this::thread::wait() - // wait(1.0); - t_comm_out.start(callback(this, &Comm::commOutFn)); - t_motor_ctrl.start(callback(this, &Comm::motorCtrlFn)); - - - } + (*nonce)++; - char newCmd[]; // because unallocated must be defined at the bottom of the class - char inCharQ[]; -}; + if (bitcoinTimer.read() >= 1){ + putMessage(Msg_hashRate, hashCounter); // 5 + hashCounter=0; + bitcoinTimer.reset(); + } + } +} - +//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Functions Definitions~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//Set a given drive state -void motorOut(int8_t driveState){ +//~~~~~~~~~~~~Set a given drive state~~~~~~~~~~~~ +void motorOut(int8_t driveState, uint32_t pw){ //Lookup the output byte from the drive state. int8_t driveOut = driveTable[driveState & 0x07]; - + //Turn off first - if (~driveOut & 0x01) L1L = 0; + if (~driveOut & 0x01) L1L.pulsewidth_us(0); if (~driveOut & 0x02) L1H = 1; - if (~driveOut & 0x04) L2L = 0; + if (~driveOut & 0x04) L2L.pulsewidth_us(0); if (~driveOut & 0x08) L2H = 1; - if (~driveOut & 0x10) L3L = 0; + if (~driveOut & 0x10) L3L.pulsewidth_us(0); if (~driveOut & 0x20) L3H = 1; - + //Then turn on - if (driveOut & 0x01) L1L = 1; + if (driveOut & 0x01) L1L.pulsewidth_us(pw); if (driveOut & 0x02) L1H = 0; - if (driveOut & 0x04) L2L = 1; + if (driveOut & 0x04) L2L.pulsewidth_us(pw); if (driveOut & 0x08) L2H = 0; - if (driveOut & 0x10) L3L = 1; + if (driveOut & 0x10) L3L.pulsewidth_us(pw); if (driveOut & 0x20) L3H = 0; } + -//Convert photointerrupter inputs to a rotor state +//~Convert photointerrupter inputs to a rotor state~ inline int8_t readRotorState(){ return stateMap[I1 + 2*I2 + 4*I3]; } -//Basic synchronisation routine +//~~~~~~Basic motor synchronisation routine~~~~~~ int8_t motorHome() { //Put the motor in drive state 0 and wait for it to stabilise - motorOut(0); + motorOut(0, MAXPWM); // set to max PWM wait(2.0); - + //Get the rotor state return readRotorState(); } -void stateUpdate(int8_t *params[]) { // () { // **params - *params[0] = readRotorState(); - int8_t currentState = *params[0]; - int8_t offset = *params[1]; +//~~~~~~~~~Motor ISR (photointerrupters)~~~~~~~~~ +void motorISR() { + static int8_t oldRotorState; + int8_t rotorState = readRotorState(); + + motorOut((rotorState-orState+lead+6)%6,motorPower); + + // update motorPosition and oldRotorState + if (rotorState - oldRotorState == 5) motorPos--; + else if (rotorState - oldRotorState == -5) motorPos++; + else motorPos += (rotorState - oldRotorState); + oldRotorState = rotorState; +} + + +//~~~~~Decode messages to print on serial port~~~~~ +void commOutFn() { + while(1) { + osEvent newEvent = outMessages.get(); + message_t *pMessage = (message_t*)newEvent.value.p; - switch (currentState) { - case 1: - stateCount[0]++; - break; - case (1 + lead): - stateCount[1]++; - break; - case (1 + (lead*2)): - stateCount[2]++; - break; + //Case switch to choose serial output based on incoming message + switch(pMessage->code) { + case Msg_motorState: + pc.printf("The motor is currently in state %x\n\r", pMessage->data); + break; + case Msg_hashRate: + pc.printf("Mining at a rate of %.2f Hash/s\n\r", (int32_t)pMessage->data); + break; + case Msg_nonceMatch: + pc.printf("Nonce found: %x\n\r", pMessage->data); + break; + case Msg_keyAdded: + pc.printf("New key added:\t0x%016x\n\r", pMessage->data); + break; + case Msg_torque: + pc.printf("Motor torque set to:\t%d\n\r", pMessage->data); + break; + case Msg_velocityIn: + pc.printf("Target velocity set to:\t%.2f\n\r", targetVel); + break; + case Msg_velocityOut: + pc.printf("Current Velocity:\t%.2f\n\r", \ + (float)((int32_t)pMessage->data / 6)); + break; + case Msg_positionIn: + pc.printf("Target rotation set to:\t%.2f\n\r", \ + (float)((int32_t)pMessage->data / 6)); + break; + case Msg_positionOut: + pc.printf("Current position:\t%.2f\n\r", \ + (float)((int32_t)pMessage->data / 6)); + break; + case Msg_error: + pc.printf("Debugging position:%x\n\r", pMessage->data); + break; + default: + pc.printf("Unknown Error. Data: %x\n\r", pMessage->data); + break; + } + outMessages.free(pMessage); } +} - motorOut((currentState - offset + lead + 6) % 6); + +//~~~~~~~~~Put message in Mail queue~~~~~~~~~~~ +void putMessage(MsgCode code, uint32_t data){ + message_t *pMessage = outMessages.alloc(); + pMessage->code = code; + pMessage->data = data; + outMessages.put(pMessage); +} + + +//~~~~Receive & decode serial input command~~~~~ +void commInFn() { + while (1) { + osEvent newEvent = inCharQ.get(); + uint8_t newChar = *((uint8_t*)(&newEvent.value.p)); + pc.putc(newChar); + if(cmdIndx >= MAXCMDLENGTH){ //Make sure there is no overflow in comand. + cmdIndx = 0; + putMessage(Msg_error, 1); + } + else{ + if(newChar != '\r'){ //While the command is not over, + newCmd[cmdIndx] = newChar; //save input character and + cmdIndx++; //advance index + } + else{ + newCmd[cmdIndx] = '\0'; //When the command is finally over, + cmdIndx = 0; //reset index and + cmdParser(); //parse the command for decoding. + } + } + } } -//Main -int main() { - // std::ios::sync_with_stdio(false); - Comm comm_plz; - - // comm_plz.pc.printf("%s\n", "do i work bruh" ); // using printf of class is calm - SHA256 Miner; - - uint8_t sequence[] = {0x45,0x6D,0x62,0x65,0x64,0x64,0x65,0x64, - 0x20,0x53,0x79,0x73,0x74,0x65,0x6D,0x73, - 0x20,0x61,0x72,0x65,0x20,0x66,0x75,0x6E, - 0x20,0x61,0x6E,0x64,0x20,0x64,0x6F,0x20, - 0x61,0x77,0x65,0x73,0x6F,0x6D,0x65,0x20, - 0x74,0x68,0x69,0x6E,0x67,0x73,0x21,0x20, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; - uint64_t* key = (uint64_t*)((int)sequence + 48); - uint64_t* nonce = (uint64_t*)((int)sequence + 56); - uint8_t hash[32]; - uint32_t length64 = 64; - uint32_t hashCounter = 0; - Timer timer; - - float dutyC = 1; // 100% - float mtrPeriod = 2e-3; // motor period - - pwmCtrl.period(mtrPeriod); - pwmCtrl.pulsewidth(mtrPeriod*dutyC); - - comm_plz.start_comm(); - // Motor States - int8_t orState = 0; //Rotot offset at motor state 0 - int8_t currentState = 0; //Rotot offset at motor state 0 - int8_t stateList[6]; //Rotot offset at motor state 0 - //Run the motor synchronisation - orState = motorHome(); - - theStates[0] = orState; - theStates[1] = (orState + lead) % 6; - theStates[2] = (orState + (lead*2)) % 6; - - // Add callbacks - // I1.fall(&stateUpdate); - // I2.fall(&stateUpdate); - // I3.fall(&stateUpdate); - int8_t* params[2]; - params[0] = ¤tState; - params[1] = &orState; +//~~~~~~~~~~~~~Decode the command~~~~~~~~~~~ +void cmdParser(){ + switch(newCmd[0]) { + case 'K': + newKey_mutex.lock(); //Ensure there is no deadlock + sscanf(newCmd, "K%x", &newKey); //Find desired the Key code + putMessage(Msg_keyAdded, newKey); //Print it out + newKey_mutex.unlock(); + break; + case 'V': + sscanf(newCmd, "V%f", &targetVel); //Find desired the target velocity + putMessage(Msg_velocityIn, targetVel); //Print it out + break; + case 'R': + sscanf(newCmd, "R%f", &targetRot); //Find desired target rotation + putMessage(Msg_positionIn, targetRot); //Print it out + break; + case 'T': + sscanf(newCmd, "T%d", &motorPower); //Find desired target torque + putMessage(Msg_torque, motorPower); //Print it out + break; + default: break; + } +} - I1.fall(callback(&stateUpdate,params)); - I2.fall(callback(&stateUpdate,params)); - I3.fall(callback(&stateUpdate,params)); - - I1.rise(callback(&stateUpdate,params)); - I2.rise(callback(&stateUpdate,params)); - I3.rise(callback(&stateUpdate,params)); - - // Push motor to move - currentState = readRotorState(); - motorOut((currentState-orState+lead+6)%6); // We push it digitally - // pc.printf("Rotor origin: %x\n\r",orState); - // orState is subtracted from future rotor state inputs to align rotor and motor states - // intState = readRotorState(); - //if (intState != intStateOld) { - // pc.printf("old:%d \t new:%d \t next:%d \n\r",intStateOld, intState, (intState-orState+lead+6)%6); - // intStateOld = intState; - // motorOut((intState-orState+lead+6)%6); //+6 to make sure the remainder is positive - // } +//~~~~~~~~~~~~~Serial ISR~~~~~~~~~~~~ +void serialISR() { + uint8_t newChar = pc.getc(); + inCharQ.put((void*)newChar); +} - dutyC = 0.8; - pwmCtrl.pulsewidth(mtrPeriod*dutyC); + +//~~~~~~ISR triggered by Ticker~~~~~~ +void motorCtrlTick(){ + motorCtrlT.signal_set(0x1); //Set signal to motor control thread which carries out calculations to avoid CPU blocking +} - // Keep the program running indefinitely - timer.start(); // start timer - int stateCount = 0; - while (1) { - // pc.printf("Current:%d \t Next:%d \n\r", currentState, (currentState-orState+lead+6)%6); - comm_plz.newKey_mutex.lock(); - *key = comm_plz.newKey; - comm_plz.newKey_mutex.unlock(); - Miner.computeHash(hash, sequence, length64); - hashCounter++; - if ((hash[0]==0) && (hash[1]==0)){ - comm_plz.putMessage((Comm::msgType)7, *nonce); +//~~~~~~~~~~~~~Motor control function with proportional controller~~~~~~~~~~~ +void motorCtrlFn() { + + //~~~~~~~~~~~~~Variables~~~~~~~~~~~~~~~~ + Ticker motorCtrlTicker; //Ticker to ba attached to callback function + int32_t velocity; //Variable for local velocity calculation + int32_t locMotorPos; //Local copy of motor position + static int32_t oldMotorPos = 0; //Old motor position used for calculations + static uint8_t motorCtrlCounter = 0; //Counter to be reset every 10 iterations to get velocity calculation in seconds + int32_t torque; //Local variable to set motor torque + float sError; //Velocity error between target and reality + float rError; //Rotation error between target and reality + static float rErrorOld; //Old rotation error used for calculation + + //~~~Controller constants~~~~ + int32_t Kp1=22; //Proportional controller constants + int32_t Kp2=22; //Calculated by trial and error to give optimal accuracy + float Kd=15.5; + + + //Attach ticker to callback function that will run every 100 ms + motorCtrlTicker.attach_us(&motorCtrlTick,100000); + + + + while(1) { + motorCtrlT.signal_wait(0x1); // Wait for thread signal. + + //Initial velocity calculation and report + locMotorPos = motorPos; //Read global variable motorPos which is updated by interrupt and store it in local variable + velocity = (locMotorPos - oldMotorPos) * 10; //Proceed with calculation + oldMotorPos = locMotorPos; //Update old motor position + motorCtrlCounter++; //Advance counter + if (motorCtrlCounter >= 10) { //Every 10th iteration + motorCtrlCounter = 0; //Reset counter + putMessage(Msg_velocityOut, velocity); //Report the current velocity + putMessage(Msg_positionOut, locMotorPos); //Report the current position + } + /* + //~~~~~Speed controller~~~~~~ + sError = (targetVel * 6) - abs(velocity); //Read global variable targetVel updated by interrupt and calculate error between target and reality + int32_t Ys; //Initialise controller output Ys + if (sError == -abs(velocity)) { //Check if user entered V0, + Ys = MAXPWM; //and set the output to maximum as specified + } + else { + Ys = (int)(Kp1 * sError); //If the user didn't enter V0 implement controller transfer function: Ys = Kp * (s -|v|) where, + } //Ys = controller output, Kp = prop controller constant, s = target velocity and v is the measured velocity + + //~~~~~Rotation control~~~~~~ + rError = targetRot - (locMotorPos/6); //Read global variable targetRot updated by interrupt and calculate the rotation error. + int32_t Yr; //Initialise controller output Yr + Yr = Kp2*rError + Kd*(rError - rErrorOld); //Implement controller transfer function Ys= Kp*Er + Kd* (dEr/dt) + rErrorOld = rError; //Update rotation error + if(rError < 0){ //Use the sign of the error to set controller wrt direction of rotation + Ys = -Ys; } - // Try a new nonce - (*nonce)++; - - if (stateCount<6){ - stateList[stateCount] = currentState; - stateCount++; + if((velocity>=0 && Ys<Yr) || (velocity<0 && Ys>Yr)){ //Choose Ys or Yr based on distance from target value so that it takes + torque = Ys; //appropriate steps in the right direction to reach target value + } + else{ + torque = Yr; + } + if(torque < 0){ //Variable torque cannot be negative since it sets the PWM + torque = -torque; //Hence we make the value positive, + lead = -2; //and instead set the direction to the opposite one } - else { - //pc.printf("states"); - //for(int i = 0; i < 6; ++i) - //pc.printf("%02i,", stateList[i]); - //pc.printf("\n\r"); - stateCount = 0; + else{ + lead = 2; } - - // Per Second i.e. when greater or equal to 1 - if (timer.read() >= 1){ - comm_plz.putMessage((Comm::msgType)5, hashCounter); - //pc.printf("HashRate = %02u \n\r",hashCounter); - hashCounter=0; - timer.reset(); - } + if(torque > MAXPWM){ //In case the calculated PWM is higher than our maximum 50% allowance, + torque = MAXPWM; //Set it to our max. + } + motorPower = torque; //Lastly, update global variable motorPower which is updated by interrupt + */ } -} \ No newline at end of file +}