Senior Design: Sound Monitor
/
FINAL_AUDIO_RECORD
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependencies: CMSIS_DSP_401 STM32L4xx_HAL_Driver
Fork of
OneHopeOnePrayer
by 
Senior Design: Sound Monitor
Revision 5:f6afbd3fc47a, committed 2015-12-05
- Comitter:
- EricLew
- Date:
- Sat Dec 05 16:17:25 2015 +0000
- Parent:
- 4:652cb54276d0
- Commit message:
- Ported to Nucleo
Changed in this revision
diff -r 652cb54276d0 -r f6afbd3fc47a Main.c --- a/Main.c Thu Dec 03 22:16:32 2015 +0000 +++ b/Main.c Sat Dec 05 16:17:25 2015 +0000 @@ -2,7 +2,7 @@ uint32_t fftSize = 2048; uint32_t ifftFlag = 0; -uint32_t doBitReverse = 1; +uint32_t doBitReverse = 0; extern float32_t PWRCONTROLMSE; //CONTROL POWER MSE extern float32_t PHSCONTROLMSE; //CONTROL PHASE MSE
diff -r 652cb54276d0 -r f6afbd3fc47a audio_record.c
--- a/audio_record.c Thu Dec 03 22:16:32 2015 +0000
+++ b/audio_record.c Sat Dec 05 16:17:25 2015 +0000
@@ -116,9 +116,9 @@
//PERFORMS THE FFT
//RECORDING 0
- arm_cfft_f32(S, FloatBuffout0, 0,1); //Output of FFT is half the record buffer size
+ arm_cfft_f32(S, FloatBuffout0, 0,0); //Output of FFT is half the record buffer size
//RECORDING 1
- arm_cfft_f32(S, FloatBuffout1, 0,1);
+ arm_cfft_f32(S, FloatBuffout1, 0,0);
//FloatBuffout0[0]=0;
//FloatBuffout1[0]=0;
@@ -196,7 +196,7 @@
while (EXIT != SET)
{
- if (counter==15000000) //Approximately 3 seconds of record time
+ if (counter==10000000) //Approximately 3 seconds of record time
{
EXIT=1; //FLAG IS REGISTER R5
}
@@ -224,7 +224,7 @@
FloatBuffSAMPLEout[(n*2)+1] = 0.0;}
//PERFORMS THE
- arm_cfft_f32(S, FloatBuffSAMPLEout, 0,1); //Output of FFT is half the record buffer size
+ arm_cfft_f32(S, FloatBuffSAMPLEout, 0,0); //Output of FFT is half the record buffer size
//FloatBuffSAMPLEout[0]=0;
//MSE FUNCTION
//SEPARATES REAL AND IMAGINARY PARTS
@@ -268,24 +268,30 @@
{SAMPLEPHASEMSE=SAMPLEPHASEMSE+compare[n];} //Takes the mean of the error, stores MSE in CONTROLMSE
SAMPLEPHASEMSE=SAMPLEPHASEMSE/1024.0f;
- float32_t TEST[6];
+ float32_t TEST[6];
TEST[0]=PWRCONTROLMSE;
TEST[1]=PHSCONTROLMSE;
TEST[2]=SAMPLEPHASEMSE;
TEST[3]=SAMPLEPWRMSE;
TEST[4]=(SAMPLEPWRMSE/PWRCONTROLMSE); //The ratio of sample MSE and control MSE
TEST[5]=(SAMPLEPHASEMSE/PHSCONTROLMSE);
-
- //COMPARISON
- //if(SAMPLEPHASEMSE>(10*PHSCONTROLMSE))////IMPLEMENT ABSOLUTE VALUE FUNCTION FOR DIFFERENCE!!!!!
- //{
- //SEND ERROR MESSAGE
- //CREATE EVENT
- //}
- if(20 < TEST[4] && TEST[4] < .01)//MODEM FUNCTIONS
- {
- //SEND ERROR MESSAGE
- //CREATE EVENT
- }
-
+ float32_t low=.001; //LOW END OF ACCEPTED TOLERANCE RANGE
+ float32_t high=20; //HIGH END OF ACCEPTED TOLERANCE RANGE
+
+ //COMPARISON
+ //if(SAMPLEPHASEMSE>(10*PHSCONTROLMSE))
+ //{
+ //SEND ERROR MESSAGE
+ //CREATE EVENT
+ //}
+ if(TEST[4]>high)//MODEM FUNCTIONS
+ {
+ //SEND ERROR MESSAGE
+ //CREATE EVENT
+ }
+ if(TEST[4] < low)
+ {
+ //SEND ERROR MESSAGE
+ //CREATE EVENT
+ }
}
diff -r 652cb54276d0 -r f6afbd3fc47a main.h --- a/main.h Thu Dec 03 22:16:32 2015 +0000 +++ b/main.h Sat Dec 05 16:17:25 2015 +0000 @@ -43,7 +43,7 @@ #include "stdio.h" #include "string.h" #include "stm32l4xx_hal.h" -#include "stm32l476g_discovery.h" +#include "stm32l4xx_nucleo.h" #include "arm_math.h" #include "arm_const_structs.h" @@ -54,9 +54,7 @@ #include "core_cmInstr.h" #include "stdint.h" -#include "stm32l476g_discovery_glass_lcd.h" -#include "stm32l476g_discovery_audio.h" -#include "stm32l476g_discovery_qspi.h" +#include "stm32l4xx_nucleo_audio.h" /* Exported constants --------------------------------------------------------*/ #define DEMO_NAME_CHAR_NB 20
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery.c
--- a/stm32l476g_discovery.c Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1771 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l476g_discovery.c
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief This file provides a set of firmware functions to manage Leds,
- * push-button and joystick of STM32L476G-Discovery board (MB1184)
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l476g_discovery.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY STM32L476G-DISCOVERY
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Common STM32L476G-DISCOVERY Common
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Private_TypesDefinitions Private Types Definitions
- * @brief This file provides firmware functions to manage Leds, push-buttons,
- * COM ports, SD card on SPI and temperature sensor (TS751) available on
- * STM32L476G-DISCOVERY discoveryuation board from STMicroelectronics.
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Private_Defines Private Defines
- * @{
- */
-
-/**
- * @brief STM32L476G DISCOVERY BSP Driver version number V1.0.1
- */
-#define __STM32L476G_DISCOVERY_BSP_VERSION_MAIN (0x01) /*!< [31:24] main version */
-#define __STM32L476G_DISCOVERY_BSP_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
-#define __STM32L476G_DISCOVERY_BSP_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
-#define __STM32L476G_DISCOVERY_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */
-#define __STM32L476G_DISCOVERY_BSP_VERSION ((__STM32L476G_DISCOVERY_BSP_VERSION_MAIN << 24)\
- |(__STM32L476G_DISCOVERY_BSP_VERSION_SUB1 << 16)\
- |(__STM32L476G_DISCOVERY_BSP_VERSION_SUB2 << 8 )\
- |(__STM32L476G_DISCOVERY_BSP_VERSION_RC))
-/**
- * @}
- */
-
-
-/** @defgroup STM32L476G_DISCOVERY_Private_Macros Private Macros
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup STM32L476G_DISCOVERY_Exported_Variables Exported Variables
- * @{
- */
-
-/**
- * @brief LED variables
- */
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-GPIO_TypeDef* LED_PORT[LEDn] = {LED4_GPIO_PORT,
- LED5_GPIO_PORT};
-
-const uint16_t LED_PIN[LEDn] = {LED4_PIN,
- LED5_PIN};
-#elif defined (USE_STM32L476G_DISCO_REVA)
-GPIO_TypeDef* LED_PORT[LEDn] = {LED3_GPIO_PORT,
- LED4_GPIO_PORT};
-
-const uint16_t LED_PIN[LEDn] = {LED3_PIN,
- LED4_PIN};
-#endif
-
-
-/**
- * @brief JOYSTICK variables
- */
- GPIO_TypeDef* JOY_PORT[JOYn] = {SEL_JOY_GPIO_PORT,
- DOWN_JOY_GPIO_PORT,
- LEFT_JOY_GPIO_PORT,
- RIGHT_JOY_GPIO_PORT,
- UP_JOY_GPIO_PORT};
-
-const uint16_t JOY_PIN[JOYn] = {SEL_JOY_PIN,
- LEFT_JOY_PIN,
- RIGHT_JOY_PIN,
- DOWN_JOY_PIN,
- UP_JOY_PIN};
-
-const uint8_t JOY_IRQn[JOYn] = {SEL_JOY_EXTI_IRQn,
- LEFT_JOY_EXTI_IRQn,
- RIGHT_JOY_EXTI_IRQn,
- DOWN_JOY_EXTI_IRQn,
- UP_JOY_EXTI_IRQn};
-
-/**
- * @brief BUS variables
- */
-#if defined(HAL_I2C_MODULE_ENABLED)
-uint32_t I2c1Timeout = DISCOVERY_I2C2_TIMEOUT_MAX; /*<! Value of Timeout when I2C1 communication fails */
-uint32_t I2c2Timeout = DISCOVERY_I2C2_TIMEOUT_MAX; /*<! Value of Timeout when I2C2 communication fails */
-static I2C_HandleTypeDef I2c1Handle;
-static I2C_HandleTypeDef I2c2Handle;
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#if defined(HAL_SPI_MODULE_ENABLED)
-
-/* LL definition */
-#define __SPI_DIRECTION_2LINES(__HANDLE__) do{\
- CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE);\
- }while(0);
-
-#define __SPI_DIRECTION_2LINES_RXONLY(__HANDLE__) do{\
- CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE);\
- SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_RXONLY);\
- }while(0);
-
-#define __SPI_DIRECTION_1LINE_TX(__HANDLE__) do{\
- CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE);\
- SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE);\
- }while(0);
-
-#define __SPI_DIRECTION_1LINE_RX(__HANDLE__) do {\
- CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE);\
- SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIMODE);\
- } while(0);
-
-
-uint32_t SpixTimeout = SPIx_TIMEOUT_MAX; /*<! Value of Timeout when SPI communication fails */
-static SPI_HandleTypeDef SpiHandle;
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Private_FunctionPrototypes Private Functions
- * @{
- */
-/**************************** Bus functions ************************************/
-/* I2C2 bus function */
-#if defined(HAL_I2C_MODULE_ENABLED)
-static void I2C2_Init(void);
-static void I2C2_MspInit(I2C_HandleTypeDef *hi2c);
-static void I2C2_DeInit(void);
-static void I2C2_MspDeInit(I2C_HandleTypeDef *hi2c);
-static void I2C2_WriteData(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t Value);
-static HAL_StatusTypeDef I2C2_WriteBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length);
-static uint8_t I2C2_ReadData(uint16_t Addr, uint16_t Reg, uint16_t RegSize);
-static HAL_StatusTypeDef I2C2_ReadBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length);
-static void I2C2_Error (void);
-
-static void I2C1_Init(void);
-static void I2C1_MspInit(I2C_HandleTypeDef *hi2c);
-static void I2C1_DeInit(void);
-static void I2C1_MspDeInit(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C1_WriteBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length);
-static HAL_StatusTypeDef I2C1_ReadBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length);
-static void I2C1_Error (void);
-#endif/* HAL_I2C_MODULE_ENABLED */
-
-/* SPIx bus function */
-#if defined(HAL_SPI_MODULE_ENABLED)
-static void SPIx_Init(void);
-static void SPIx_MspInit(SPI_HandleTypeDef *hspi);
-static void SPIx_DeInit(void);
-static void SPIx_MspDeInit(void);
-static uint8_t SPIx_WriteRead(uint8_t Byte);
-static void SPIx_Write(uint8_t byte);
-static uint8_t SPIx_Read(void);
-#endif
-
-/**************************** Link functions ***********************************/
-#if defined(HAL_I2C_MODULE_ENABLED)
-/* Link functions for EEPROM peripheral over I2C */
-void EEPROM_I2C_IO_Init(void);
-HAL_StatusTypeDef EEPROM_I2C_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
-HAL_StatusTypeDef EEPROM_I2C_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
-HAL_StatusTypeDef EEPROM_I2C_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
-
-/* Link functions for Audio Codec peripheral */
-void AUDIO_IO_Init(void);
-void AUDIO_IO_DeInit(void);
-void AUDIO_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
-uint8_t AUDIO_IO_Read(uint8_t Addr, uint8_t Reg);
-void AUDIO_IO_Delay(uint32_t delay);
-#endif/* HAL_I2C_MODULE_ENABLED */
-
-#if defined(HAL_SPI_MODULE_ENABLED)
-/* Link function for COMPASS / ACCELERO peripheral */
-void ACCELERO_IO_Init(void);
-void ACCELERO_IO_DeInit(void);
-void ACCELERO_IO_ITConfig(void);
-void ACCELERO_IO_Write(uint8_t RegisterAddr, uint8_t Value);
-uint8_t ACCELERO_IO_Read(uint8_t RegisterAddr);
-
-void MAGNETO_IO_Init(void);
-void MAGNETO_IO_DeInit(void);
-void MAGNETO_IO_ITConfig(void);
-void MAGNETO_IO_Write(uint8_t RegisterAddr, uint8_t Value);
-uint8_t MAGNETO_IO_Read(uint8_t RegisterAddr);
-
-
-/* Link functions for GYRO peripheral */
-void GYRO_IO_Init(void);
-void GYRO_IO_DeInit(void);
-void GYRO_IO_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite);
-void GYRO_IO_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead);
-
-#endif
-
-#if defined(HAL_I2C_MODULE_ENABLED)
-/* Link functions IOExpander */
-void IOE_Init(void);
-void IOE_ITConfig(void);
-void IOE_Delay(uint32_t Delay);
-void IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
-uint8_t IOE_Read(uint8_t Addr, uint8_t Reg);
-uint16_t IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
-
-/* Link functions for IDD measurment */
-void MFX_IO_Init(void);
-void MFX_IO_DeInit(void);
-void MFX_IO_ITConfig (void);
-void MFX_IO_EnableWakeupPin(void);
-void MFX_IO_Wakeup(void);
-void MFX_IO_Delay(uint32_t delay);
-void MFX_IO_Write(uint16_t addr, uint8_t reg, uint8_t value);
-uint8_t MFX_IO_Read(uint16_t addr, uint8_t reg);
-void MFX_IO_WriteMultiple(uint16_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
-uint16_t MFX_IO_ReadMultiple(uint16_t addr, uint8_t reg, uint8_t *buffer, uint16_t length);
-#endif/* HAL_I2C_MODULE_ENABLED */
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Exported_Functions Exported Functions
- * @{
- */
-
-/**
- * @brief This method returns the STM32L476 DISCOVERY BSP Driver revision
- * @retval version : 0xXYZR (8bits for each decimal, R for RC)
- */
-uint32_t BSP_GetVersion(void)
-{
- return __STM32L476G_DISCOVERY_BSP_VERSION;
-}
-
-/**
- * @brief This method returns the STM32L476 DISCOVERY supply mode
- * @retval Code of current supply mode
- * This code can be one of following:
- * @arg SUPPLY_MODE_EXTERNAL
- * @arg SUPPLY_MODE_BATTERY
- */
-SupplyMode_TypeDef BSP_SupplyModeDetection(void)
-{
- SupplyMode_TypeDef supplymode = SUPPLY_MODE_ERROR;
- GPIO_InitTypeDef GPIO_InitStruct;
-
- BATTERY_DETECTION_GPIO_CLK_ENABLE();
-
- /* COMP GPIO pin configuration */
- GPIO_InitStruct.Pin = BATTERY_DETECTION_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(BATTERY_DETECTION_GPIO_PORT, &GPIO_InitStruct);
-
- HAL_Delay(400);
- if(HAL_GPIO_ReadPin(BATTERY_DETECTION_GPIO_PORT, GPIO_InitStruct.Pin) != GPIO_PIN_RESET)
- {
- supplymode = SUPPLY_MODE_EXTERNAL;
- }
- else
- {
- supplymode = SUPPLY_MODE_BATTERY;
- }
-
- HAL_GPIO_DeInit(BATTERY_DETECTION_GPIO_PORT, GPIO_InitStruct.Pin);
-
- return supplymode;
-}
-
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-/**
- * @brief Configures LED GPIOs.
- * @param Led: Specifies the Led to be configured.
- * This parameter can be one of following parameters:
- * @arg LED4
- * @arg LED5
- * @retval None
- */
-#elif defined (USE_STM32L476G_DISCO_REVA)
-/**
- * @brief Configures LED GPIOs.
- * @param Led: Specifies the Led to be configured.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @arg LED4
- * @retval None
- */
-#endif
-void BSP_LED_Init(Led_TypeDef Led)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Enable the GPIO_LED clock */
- LEDx_GPIO_CLK_ENABLE(Led);
-
- /* Configure the GPIO_LED pin */
- GPIO_InitStructure.Pin = LED_PIN[Led];
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-
- HAL_GPIO_Init(LED_PORT[Led], &GPIO_InitStructure);
-
- HAL_GPIO_WritePin(LED_PORT[Led], GPIO_InitStructure.Pin, GPIO_PIN_RESET);
-}
-
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-/**
- * @brief Unconfigures LED GPIOs.
- * @param Led: Specifies the Led to be unconfigured.
- * This parameter can be one of following parameters:
- * @arg LED4
- * @arg LED5
- * @retval None
- */
-#elif defined (USE_STM32L476G_DISCO_REVA)
-/**
- * @brief Unconfigures LED GPIOs.
- * @param Led: Specifies the Led to be unconfigured.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @arg LED4
- * @retval None
- */
-#endif
-void BSP_LED_DeInit(Led_TypeDef Led)
-{
- /* Enable the GPIO_LED clock */
- LEDx_GPIO_CLK_ENABLE(Led);
-
- HAL_GPIO_DeInit(LED_PORT[Led], LED_PIN[Led]);
-}
-
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-/**
- * @brief Turns selected LED On.
- * @param Led: Specifies the Led to be set on.
- * This parameter can be one of following parameters:
- * @arg LED4
- * @arg LED5
- * @retval None
- */
-#elif defined (USE_STM32L476G_DISCO_REVA)
-/**
- * @brief Turns selected LED On.
- * @param Led: Specifies the Led to be set on.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @arg LED4
- * @retval None
- */
-#endif
-void BSP_LED_On(Led_TypeDef Led)
-{
- HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_SET);
-}
-
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-/**
- * @brief Turns selected LED Off.
- * @param Led: Specifies the Led to be set off.
- * This parameter can be one of following parameters:
- * @arg LED4
- * @arg LED5
- * @retval None
- */
-#elif defined (USE_STM32L476G_DISCO_REVA)
-/**
- * @brief Turns selected LED Off.
- * @param Led: Specifies the Led to be set off.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @arg LED4
- * @retval None
- */
-#endif
-void BSP_LED_Off(Led_TypeDef Led)
-{
- HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
-}
-
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-/**
- * @brief Toggles the selected LED.
- * @param Led: Specifies the Led to be toggled.
- * This parameter can be one of following parameters:
- * @arg LED4
- * @arg LED5
- * @retval None
- */
-#elif defined (USE_STM32L476G_DISCO_REVA)
-/**
- * @brief Toggles the selected LED.
- * @param Led: Specifies the Led to be toggled.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @arg LED4
- * @retval None
- */
-#endif
-void BSP_LED_Toggle(Led_TypeDef Led)
-{
- HAL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
-}
-
-/**
- * @brief Configures all buttons of the joystick in GPIO or EXTI modes.
- * @param Joy_Mode: Joystick mode.
- * This parameter can be one of the following values:
- * @arg JOY_MODE_GPIO: Joystick pins will be used as simple IOs
- * @arg JOY_MODE_EXTI: Joystick pins will be connected to EXTI line
- * with interrupt generation capability
- * @retval HAL_OK: if all initializations are OK. Other value if error.
- */
-uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode)
-{
- JOYState_TypeDef joykey;
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Initialized the Joystick. */
- for(joykey = JOY_SEL; joykey < (JOY_SEL + JOYn) ; joykey++)
- {
- /* Enable the JOY clock */
- JOYx_GPIO_CLK_ENABLE(joykey);
-
- GPIO_InitStruct.Pin = JOY_PIN[joykey];
- GPIO_InitStruct.Pull = GPIO_PULLDOWN;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-
- if (Joy_Mode == JOY_MODE_GPIO)
- {
- /* Configure Joy pin as input */
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- HAL_GPIO_Init(JOY_PORT[joykey], &GPIO_InitStruct);
- }
- else if (Joy_Mode == JOY_MODE_EXTI)
- {
- /* Configure Joy pin as input with External interrupt */
- GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
- HAL_GPIO_Init(JOY_PORT[joykey], &GPIO_InitStruct);
-
- /* Enable and set Joy EXTI Interrupt to the lowest priority */
- HAL_NVIC_SetPriority((IRQn_Type)(JOY_IRQn[joykey]), 0x0F, 0x00);
- HAL_NVIC_EnableIRQ((IRQn_Type)(JOY_IRQn[joykey]));
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Unonfigures all GPIOs used as buttons of the joystick.
- * @retval None.
- */
-void BSP_JOY_DeInit(void)
-{
- JOYState_TypeDef joykey;
-
- /* Initialized the Joystick. */
- for(joykey = JOY_SEL; joykey < (JOY_SEL + JOYn) ; joykey++)
- {
- /* Enable the JOY clock */
- JOYx_GPIO_CLK_ENABLE(joykey);
-
- HAL_GPIO_DeInit(JOY_PORT[joykey], JOY_PIN[joykey]);
- }
-}
-
-/**
-* @brief Returns the current joystick status.
-* @retval Code of the joystick key pressed
-* This code can be one of the following values:
-* @arg JOY_NONE
-* @arg JOY_SEL
-* @arg JOY_DOWN
-* @arg JOY_LEFT
-* @arg JOY_RIGHT
-* @arg JOY_UP
-*/
-JOYState_TypeDef BSP_JOY_GetState(void)
-{
- JOYState_TypeDef joykey;
-
- for (joykey = JOY_SEL; joykey < (JOY_SEL + JOYn) ; joykey++)
- {
- if (HAL_GPIO_ReadPin(JOY_PORT[joykey], JOY_PIN[joykey]) == GPIO_PIN_SET)
- {
- /* Return Code Joystick key pressed */
- return joykey;
- }
- }
-
- /* No Joystick key pressed */
- return JOY_NONE;
-}
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_BusOperations_Functions Bus Operations Functions
- * @{
- */
-
-/*******************************************************************************
- BUS OPERATIONS
-*******************************************************************************/
-#if defined(HAL_SPI_MODULE_ENABLED)
-/******************************* SPI Routines**********************************/
-/**
- * @brief SPIx Bus initialization
- * @retval None
- */
-static void SPIx_Init(void)
-{
- if(HAL_SPI_GetState(&SpiHandle) == HAL_SPI_STATE_RESET)
- {
- /* SPI Config */
- SpiHandle.Instance = DISCOVERY_SPIx;
- /* SPI baudrate is set to 10 MHz (PCLK1/SPI_BaudRatePrescaler = 80/8 = 10 MHz)
- to verify these constraints:
- lsm303c SPI interface max baudrate is 10MHz for write/read
- PCLK1 max frequency is set to 80 MHz
- */
- SpiHandle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = SPI_PHASE_1EDGE;
- SpiHandle.Init.CLKPolarity = SPI_POLARITY_LOW;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = SPI_DATASIZE_8BIT;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = SPI_NSS_SOFT;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLE;
- SpiHandle.Init.Mode = SPI_MODE_MASTER;
-
- SPIx_MspInit(&SpiHandle);
- HAL_SPI_Init(&SpiHandle);
- }
-}
-
-/**
- * @brief SPI MSP Init
- * @param hspi: SPI handle
- * @retval None
- */
-static void SPIx_MspInit(SPI_HandleTypeDef *hspi)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Enable SPIx clock */
- DISCOVERY_SPIx_CLOCK_ENABLE();
-
- /* enable SPIx gpio clock */
- DISCOVERY_SPIx_GPIO_CLK_ENABLE();
-
- /* configure SPIx SCK, MOSI and MISO */
- GPIO_InitStructure.Pin = (DISCOVERY_SPIx_SCK_PIN | DISCOVERY_SPIx_MOSI_PIN | DISCOVERY_SPIx_MISO_PIN);
- GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL; // GPIO_PULLDOWN;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH;
- GPIO_InitStructure.Alternate = DISCOVERY_SPIx_AF;
- HAL_GPIO_Init(DISCOVERY_SPIx_GPIO_PORT, &GPIO_InitStructure);
-}
-
-/**
- * @brief SPIx Bus Deinitialization
- * @retval None
- */
-void SPIx_DeInit(void)
-{
- if(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_RESET)
- {
- /* SPI Deinit */
- HAL_SPI_DeInit(&SpiHandle);
- SPIx_MspDeInit();
- }
-}
-
-/**
- * @brief SPI MSP DeInit
- * @retval None
- */
-static void SPIx_MspDeInit(void)
-{
- /* enable SPIx gpio clock */
- DISCOVERY_SPIx_GPIO_CLK_ENABLE();
-
- /* Unconfigure SPIx SCK, MOSI and MISO */
- HAL_GPIO_DeInit(DISCOVERY_SPIx_GPIO_PORT, (DISCOVERY_SPIx_SCK_PIN | DISCOVERY_SPIx_MOSI_PIN | DISCOVERY_SPIx_MISO_PIN));
-
- DISCOVERY_SPIx_GPIO_FORCE_RESET();
- DISCOVERY_SPIx_GPIO_RELEASE_RESET();
-
- /* Disable SPIx clock */
- DISCOVERY_SPIx_CLOCK_DISABLE();
-}
-
-/**
- * @brief Sends a Byte through the SPI interface and return the Byte received
- * from the SPI bus.
- * @param Byte : Byte send.
- * @retval none.
- */
-static uint8_t SPIx_WriteRead(uint8_t Byte)
-{
- uint8_t receivedbyte;
-
- /* Enable the SPI */
- __HAL_SPI_ENABLE(&SpiHandle);
- /* check TXE flag */
- while((SpiHandle.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE);
-
- /* Write the data */
- *((__IO uint8_t*)&SpiHandle.Instance->DR) = Byte;
-
- while((SpiHandle.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE);
- receivedbyte = *((__IO uint8_t*)&SpiHandle.Instance->DR);
-
- /* Wait BSY flag */
- while((SpiHandle.Instance->SR & SPI_FLAG_FTLVL) != SPI_FTLVL_EMPTY);
- while((SpiHandle.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY);
-
- /* disable the SPI */
- __HAL_SPI_DISABLE(&SpiHandle);
-
- return receivedbyte;
-}
-
-/**
- * @brief Sends a Byte through the SPI interface.
- * @param Byte : Byte to send.
- * @retval none.
- */
-static void SPIx_Write(uint8_t Byte)
-{
- /* Enable the SPI */
- __HAL_SPI_ENABLE(&SpiHandle);
- /* check TXE flag */
- while((SpiHandle.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE);
-
- /* Write the data */
- *((__IO uint8_t*)&SpiHandle.Instance->DR) = Byte;
-
- /* Wait BSY flag */
- while((SpiHandle.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY);
-
- /* disable the SPI */
- __HAL_SPI_DISABLE(&SpiHandle);
-}
-
-#if defined(__ICCARM__)
-#pragma optimize=none
-#endif
-/**
- * @brief Receives a Byte from the SPI bus.
- * @retval The received byte value
- */
-static uint8_t SPIx_Read(void)
-{
- uint8_t receivedbyte;
-
- __HAL_SPI_ENABLE(&SpiHandle);
- __DSB();
- __DSB();
- __DSB();
- __DSB();
- __DSB();
- __DSB();
- __DSB();
- __DSB();
- __HAL_SPI_DISABLE(&SpiHandle);
-
- while((SpiHandle.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE);
- /* read the received data */
- receivedbyte = *(__IO uint8_t *)&SpiHandle.Instance->DR;
-
- /* Wait for the BSY flag reset */
- while((SpiHandle.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY);
-
-
- return receivedbyte;
-}
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-
-#if defined(HAL_I2C_MODULE_ENABLED)
-/******************************* I2C Routines**********************************/
-/**
- * @brief Discovery I2C1 Bus initialization
- * @retval None
- */
-static void I2C1_Init(void)
-{
- if(HAL_I2C_GetState(&I2c1Handle) == HAL_I2C_STATE_RESET)
- {
- I2c1Handle.Instance = DISCOVERY_I2C1;
- I2c1Handle.Init.Timing = DISCOVERY_I2C1_TIMING;
- I2c1Handle.Init.OwnAddress1 = 0;
- I2c1Handle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2c1Handle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
- I2c1Handle.Init.OwnAddress2 = 0;
- I2c1Handle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
- I2c1Handle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
-
- /* Init the I2C */
- I2C1_MspInit(&I2c1Handle);
- HAL_I2C_Init(&I2c1Handle);
- }
-}
-
-/**
- * @brief Discovery I2C1 MSP Initialization
- * @param hi2c: I2C handle
- * @retval None
- */
-static void I2C1_MspInit(I2C_HandleTypeDef *hi2c)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
- RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct;
-
- /* IOSV bit MUST be set to access GPIO port G[2:15] */
- __HAL_RCC_PWR_CLK_ENABLE();
- HAL_PWREx_EnableVddIO2();
-
- if (hi2c->Instance == DISCOVERY_I2C1)
- {
- /*##-1- Configure the Discovery I2C clock source. The clock is derived from the SYSCLK #*/
- RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C1;
- RCC_PeriphCLKInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_SYSCLK;
- HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct);
-
- /*##-2- Configure the GPIOs ################################################*/
- /* Enable GPIO clock */
- DISCOVERY_I2C1_SDA_GPIO_CLK_ENABLE();
- DISCOVERY_I2C1_SCL_GPIO_CLK_ENABLE();
-
- /* Configure I2C Rx/Tx as alternate function */
- GPIO_InitStructure.Pin = DISCOVERY_I2C1_SCL_PIN | DISCOVERY_I2C1_SDA_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_AF_OD;
- GPIO_InitStructure.Pull = GPIO_PULLUP;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStructure.Alternate = DISCOVERY_I2C1_SCL_SDA_AF;
- HAL_GPIO_Init(DISCOVERY_I2C1_SCL_GPIO_PORT, &GPIO_InitStructure);
-
- /*##-3- Configure the Discovery I2C1 peripheral #######################################*/
- /* Enable Discovery I2C1 clock */
- DISCOVERY_I2C1_CLK_ENABLE();
-
- /* Force and release the I2C Peripheral Clock Reset */
- DISCOVERY_I2C1_FORCE_RESET();
- DISCOVERY_I2C1_RELEASE_RESET();
-
- /* Enable and set Discovery I2C1 Interrupt to the highest priority */
- HAL_NVIC_SetPriority(DISCOVERY_I2C1_EV_IRQn, 0x00, 0);
- HAL_NVIC_EnableIRQ(DISCOVERY_I2C1_EV_IRQn);
-
- /* Enable and set Discovery I2C1 Interrupt to the highest priority */
- HAL_NVIC_SetPriority(DISCOVERY_I2C1_ER_IRQn, 0x00, 0);
- HAL_NVIC_EnableIRQ(DISCOVERY_I2C1_ER_IRQn);
- }
-}
-
-/**
- * @brief Discovery I2C1 Bus Deitialization
- * @retval None
- */
-static void I2C1_DeInit(void)
-{
- if(HAL_I2C_GetState(&I2c1Handle) != HAL_I2C_STATE_RESET)
- {
- /* Deinit the I2C */
- HAL_I2C_DeInit(&I2c1Handle);
- I2C1_MspDeInit(&I2c1Handle);
- }
-}
-
-/**
- * @brief Discovery I2C1 MSP Deinitialization
- * @param hi2c: I2C handle
- * @retval None
- */
-static void I2C1_MspDeInit(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->Instance == DISCOVERY_I2C1)
- {
- /*##-1- Unconfigure the GPIOs ################################################*/
- /* Enable GPIO clock */
- DISCOVERY_I2C1_SDA_GPIO_CLK_ENABLE();
- DISCOVERY_I2C1_SCL_GPIO_CLK_ENABLE();
-
- /* Deinit Rx/Tx pins */
- HAL_GPIO_DeInit(DISCOVERY_I2C1_SCL_GPIO_PORT, (DISCOVERY_I2C1_SCL_PIN | DISCOVERY_I2C1_SDA_PIN));
-
- /*##-2- Unconfigure the Discovery I2C1 peripheral ############################*/
- /* Force & Release the I2C Peripheral Clock Reset */
- DISCOVERY_I2C1_FORCE_RESET();
- DISCOVERY_I2C1_RELEASE_RESET();
-
- /* Disable Discovery I2C1 clock */
- DISCOVERY_I2C1_CLK_DISABLE();
-
- /* Disable Discovery I2C1 interrupts */
- HAL_NVIC_DisableIRQ(DISCOVERY_I2C1_EV_IRQn);
- HAL_NVIC_DisableIRQ(DISCOVERY_I2C1_ER_IRQn);
-
- __HAL_RCC_PWR_CLK_ENABLE();
- HAL_PWREx_DisableVddIO2();
- }
-}
-
-/**
- * @brief Write a value in a register of the device through BUS.
- * @param Addr: Device address on BUS Bus.
- * @param Reg: The target register address to write
- * @param RegSize: The target register size (can be 8BIT or 16BIT)
- * @param pBuffer: The target register value to be written
- * @param Length: buffer size to be written
- * @retval None
- */
-static HAL_StatusTypeDef I2C1_WriteBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- status = HAL_I2C_Mem_Write(&I2c1Handle, Addr, (uint16_t)Reg, RegSize, pBuffer, Length, I2c1Timeout);
-
-/* Check the communication status */
- if(status != HAL_OK)
- {
- /* Re-Initiaize the BUS */
- I2C1_Error();
- }
- return status;
-}
-
-/**
- * @brief Reads multiple data on the BUS.
- * @param Addr: I2C Address
- * @param Reg: Reg Address
- * @param RegSize : The target register size (can be 8BIT or 16BIT)
- * @param pBuffer: pointer to read data buffer
- * @param Length: length of the data
- * @retval 0 if no problems to read multiple data
- */
-static HAL_StatusTypeDef I2C1_ReadBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- status = HAL_I2C_Mem_Read(&I2c1Handle, Addr, (uint16_t)Reg, RegSize, pBuffer, Length, I2c1Timeout);
-
-/* Check the communication status */
- if(status != HAL_OK)
- {
- /* Re-Initiaize the BUS */
- I2C1_Error();
- }
- return status;
-}
-
-/**
- * @brief Discovery I2C1 error treatment function
- * @retval None
- */
-static void I2C1_Error (void)
-{
- /* De-initialize the I2C communication BUS */
- HAL_I2C_DeInit(&I2c1Handle);
-
- /* Re- Initiaize the I2C communication BUS */
- I2C1_Init();
-}
-
-/**
- * @brief Discovery I2C2 Bus initialization
- * @retval None
- */
-static void I2C2_Init(void)
-{
- if(HAL_I2C_GetState(&I2c2Handle) == HAL_I2C_STATE_RESET)
- {
- I2c2Handle.Instance = DISCOVERY_I2C2;
- I2c2Handle.Init.Timing = DISCOVERY_I2C2_TIMING;
- I2c2Handle.Init.OwnAddress1 = 0;
- I2c2Handle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2c2Handle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
- I2c2Handle.Init.OwnAddress2 = 0;
- I2c2Handle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
- I2c2Handle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
-
- /* Init the I2C */
- I2C2_MspInit(&I2c2Handle);
- HAL_I2C_Init(&I2c2Handle);
- }
-}
-
-/**
- * @brief Discovery I2C2 MSP Initialization
- * @param hi2c: I2C2 handle
- * @retval None
- */
-static void I2C2_MspInit(I2C_HandleTypeDef *hi2c)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
- RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct;
-
- if (hi2c->Instance == DISCOVERY_I2C2)
- {
- /*##-1- Configure the Discovery I2C2 clock source. The clock is derived from the SYSCLK #*/
- RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C2;
- RCC_PeriphCLKInitStruct.I2c2ClockSelection = RCC_I2C2CLKSOURCE_SYSCLK;
- HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct);
-
- /*##-2- Configure the GPIOs ################################################*/
- /* Enable GPIO clock */
- DISCOVERY_I2C2_SDA_GPIO_CLK_ENABLE();
- DISCOVERY_I2C2_SCL_GPIO_CLK_ENABLE();
-
- /* Configure I2C Rx/Tx as alternate function */
- GPIO_InitStructure.Pin = DISCOVERY_I2C2_SCL_PIN | DISCOVERY_I2C2_SDA_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_AF_OD;
- GPIO_InitStructure.Pull = GPIO_PULLUP;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStructure.Alternate = DISCOVERY_I2C2_SCL_SDA_AF;
- HAL_GPIO_Init(DISCOVERY_I2C2_SCL_GPIO_PORT, &GPIO_InitStructure);
-
- /*##-3- Configure the Discovery I2C2 peripheral #############################*/
- /* Enable Discovery_I2C2 clock */
- DISCOVERY_I2C2_CLK_ENABLE();
-
- /* Force and release the I2C Peripheral Clock Reset */
- DISCOVERY_I2C2_FORCE_RESET();
- DISCOVERY_I2C2_RELEASE_RESET();
-
- /* Enable and set Discovery I2C2 Interrupt to the highest priority */
- HAL_NVIC_SetPriority(DISCOVERY_I2C2_EV_IRQn, 0x00, 0);
- HAL_NVIC_EnableIRQ(DISCOVERY_I2C2_EV_IRQn);
-
- /* Enable and set Discovery I2C2 Interrupt to the highest priority */
- HAL_NVIC_SetPriority(DISCOVERY_I2C2_ER_IRQn, 0x00, 0);
- HAL_NVIC_EnableIRQ(DISCOVERY_I2C2_ER_IRQn);
- }
-}
-
-/**
- * @brief Discovery I2C2 Bus Deinitialization
- * @retval None
- */
-static void I2C2_DeInit(void)
-{
- if(HAL_I2C_GetState(&I2c2Handle) != HAL_I2C_STATE_RESET)
- {
- /* DeInit the I2C */
- HAL_I2C_DeInit(&I2c2Handle);
- I2C2_MspDeInit(&I2c2Handle);
- }
-}
-
-/**
- * @brief Discovery I2C2 MSP DeInitialization
- * @param hi2c: I2C2 handle
- * @retval None
- */
-static void I2C2_MspDeInit(I2C_HandleTypeDef *hi2c)
-{
- if (hi2c->Instance == DISCOVERY_I2C2)
- {
- /*##-1- Unconfigure the GPIOs ################################################*/
- /* Enable GPIO clock */
- DISCOVERY_I2C2_SDA_GPIO_CLK_ENABLE();
- DISCOVERY_I2C2_SCL_GPIO_CLK_ENABLE();
-
- /* Configure I2C Rx/Tx as alternate function */
- HAL_GPIO_DeInit(DISCOVERY_I2C2_SCL_GPIO_PORT, (DISCOVERY_I2C2_SCL_PIN | DISCOVERY_I2C2_SDA_PIN));
-
- /*##-2- Unconfigure the Discovery I2C2 peripheral ############################*/
- /* Force and release I2C Peripheral */
- DISCOVERY_I2C2_FORCE_RESET();
- DISCOVERY_I2C2_RELEASE_RESET();
-
- /* Disable Discovery I2C2 clock */
- DISCOVERY_I2C2_CLK_DISABLE();
-
- /* Disable Discovery I2C2 interrupts */
- HAL_NVIC_DisableIRQ(DISCOVERY_I2C2_EV_IRQn);
- HAL_NVIC_DisableIRQ(DISCOVERY_I2C2_ER_IRQn);
- }
-}
-
-/**
- * @brief Write a value in a register of the device through BUS.
- * @param Addr: Device address on BUS Bus.
- * @param Reg: The target register address to write
- * @param RegSize: The target register size (can be 8BIT or 16BIT)
- * @param Value: The target register value to be written
- * @retval None
- */
-static void I2C2_WriteData(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t Value)
- {
- HAL_StatusTypeDef status = HAL_OK;
-
- status = HAL_I2C_Mem_Write(&I2c2Handle, Addr, (uint16_t)Reg, RegSize, &Value, 1, I2c2Timeout);
-
- /* Check the communication status */
- if(status != HAL_OK)
- {
- /* Re-Initiaize the BUS */
- I2C2_Error();
- }
-}
-
-/**
- * @brief Write a value in a register of the device through BUS.
- * @param Addr: Device address on BUS Bus.
- * @param Reg: The target register address to write
- * @param RegSize: The target register size (can be 8BIT or 16BIT)
- * @param pBuffer: The target register value to be written
- * @param Length: buffer size to be written
- * @retval None
- */
-static HAL_StatusTypeDef I2C2_WriteBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- status = HAL_I2C_Mem_Write(&I2c2Handle, Addr, (uint16_t)Reg, RegSize, pBuffer, Length, I2c2Timeout);
-
- /* Check the communication status */
- if(status != HAL_OK)
- {
- /* Re-Initiaize the BUS */
- I2C2_Error();
- }
-
- return status;
-}
-
-/**
- * @brief Read a register of the device through BUS
- * @param Addr: Device address on BUS
- * @param Reg: The target register address to read
- * @param RegSize: The target register size (can be 8BIT or 16BIT)
- * @retval read register value
- */
-static uint8_t I2C2_ReadData(uint16_t Addr, uint16_t Reg, uint16_t RegSize)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint8_t value = 0x0;
-
- status = HAL_I2C_Mem_Read(&I2c2Handle, Addr, Reg, RegSize, &value, 1, I2c2Timeout);
-
- /* Check the communication status */
- if(status != HAL_OK)
- {
- /* Re-Initiaize the BUS */
- I2C2_Error();
- }
-
- return value;
-}
-
-/**
- * @brief Reads multiple data on the BUS.
- * @param Addr: I2C Address
- * @param Reg: Reg Address
- * @param RegSize : The target register size (can be 8BIT or 16BIT)
- * @param pBuffer: pointer to read data buffer
- * @param Length: length of the data
- * @retval 0 if no problems to read multiple data
- */
-static HAL_StatusTypeDef I2C2_ReadBuffer(uint16_t Addr, uint16_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- status = HAL_I2C_Mem_Read(&I2c2Handle, Addr, (uint16_t)Reg, RegSize, pBuffer, Length, I2c2Timeout);
-
- /* Check the communication status */
- if(status != HAL_OK)
- {
- /* Re-Initiaize the BUS */
- I2C2_Error();
- }
-
- return status;
-}
-
-/**
- * @brief Discovery I2C2 error treatment function
- * @retval None
- */
-static void I2C2_Error (void)
-{
- /* De-initialize the I2C communication BUS */
- HAL_I2C_DeInit(&I2c2Handle);
-
- /* Re- Initiaize the I2C communication BUS */
- I2C2_Init();
-}
-#endif /*HAL_I2C_MODULE_ENABLED*/
-
-
-/*******************************************************************************
- LINK OPERATIONS
-*******************************************************************************/
-#if defined(HAL_SPI_MODULE_ENABLED)
-/*********************** LINK ACCELEROMETER ***********************************/
-/**
- * @brief Configures COMPASS/ACCELEROMETER io interface.
- * @retval None
- */
-void ACCELERO_IO_Init(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
- ACCELERO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = ACCELERO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(ACCELERO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- ACCELERO_CS_HIGH();
-
- SPIx_Init();
-}
-
-/**
- * @brief De-Configures COMPASS/ACCELEROMETER io interface.
- * @retval None
- */
-void ACCELERO_IO_DeInit(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
- ACCELERO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = ACCELERO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(ACCELERO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- ACCELERO_CS_HIGH();
-
- /* Uninitialize SPI bus */
- SPIx_DeInit();
-}
-
-/**
- * @brief Configures COMPASS / ACCELERO click IT
- * @retval None
- */
-void ACCELERO_IO_ITConfig(void)
-{
-}
-
-/**
- * @brief Writes one byte to the COMPASS / ACCELEROMETER.
- * @param RegisterAddr specifies the COMPASS / ACCELEROMETER register to be written.
- * @param Value : Data to be written
- * @retval None
- */
-void ACCELERO_IO_Write(uint8_t RegisterAddr, uint8_t Value)
-{
- ACCELERO_CS_LOW();
- __SPI_DIRECTION_1LINE_TX(&SpiHandle);
- /* call SPI Read data bus function */
- SPIx_Write(RegisterAddr);
- SPIx_Write(Value);
- ACCELERO_CS_HIGH();
-}
-
-/**
- * @brief Reads a block of data from the COMPASS / ACCELEROMETER.
- * @param RegisterAddr : specifies the COMPASS / ACCELEROMETER internal address register to read from
- * @retval ACCELEROMETER register value
- */
-uint8_t ACCELERO_IO_Read(uint8_t RegisterAddr)
-{
- RegisterAddr = RegisterAddr | ((uint8_t)0x80);
- ACCELERO_CS_LOW();
- __SPI_DIRECTION_1LINE_TX(&SpiHandle);
- SPIx_Write(RegisterAddr);
- __SPI_DIRECTION_1LINE_RX(&SpiHandle);
- uint8_t val = SPIx_Read();
- ACCELERO_CS_HIGH();
- return val;
-}
-
-/********************************* LINK MAGNETO *******************************/
-/**
- * @brief Configures COMPASS/MAGNETO SPI interface.
- * @retval None
- */
-void MAGNETO_IO_Init(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
- MAGNETO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = MAGNETO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(MAGNETO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- MAGNETO_CS_HIGH();
-
- SPIx_Init();
-}
-
-/**
- * @brief de-Configures COMPASS/MAGNETO SPI interface.
- * @retval None
- */
-void MAGNETO_IO_DeInit(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
- MAGNETO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = MAGNETO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(MAGNETO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- MAGNETO_CS_HIGH();
-
- HAL_GPIO_DeInit(MAGNETO_CS_GPIO_PORT, MAGNETO_INT1_PIN|MAGNETO_DRDY_PIN);
-
-
- /* Uninitialize SPI bus */
- SPIx_DeInit();
-}
-
-/**
- * @brief Writes one byte to the COMPASS/MAGNETO.
- * @param RegisterAddr specifies the COMPASS/MAGNETO register to be written.
- * @param Value : Data to be written
- * @retval None
- */
-void MAGNETO_IO_Write(uint8_t RegisterAddr, uint8_t Value)
-{
- MAGNETO_CS_LOW();
- __SPI_DIRECTION_1LINE_TX(&SpiHandle);
- /* call SPI Read data bus function */
- SPIx_Write(RegisterAddr);
- SPIx_Write(Value);
- MAGNETO_CS_HIGH();
-}
-
-/**
- * @brief Reads a block of data from the COMPASS/MAGNETO.
- * @param RegisterAddr : specifies the COMPASS/MAGNETO internal address register to read from
- * @retval ACCELEROMETER register value
- */
-uint8_t MAGNETO_IO_Read(uint8_t RegisterAddr)
-{
- MAGNETO_CS_LOW();
- __SPI_DIRECTION_1LINE_TX(&SpiHandle);
- SPIx_Write(RegisterAddr | 0x80);
- __SPI_DIRECTION_1LINE_RX(&SpiHandle);
- uint8_t val = SPIx_Read();
- MAGNETO_CS_HIGH();
- return val;
-}
-
-/********************************* LINK GYRO *****************************/
-/**
- * @brief Configures the GYRO SPI interface.
- * @retval None
- */
-void GYRO_IO_Init(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
-
-
- /* Case GYRO not used in the demonstration software except being set in
- low power mode.
- To avoid access conflicts with accelerometer and magnetometer,
- initialize XL_CS and MAG_CS pins then deselect these I/O */
- ACCELERO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = ACCELERO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(ACCELERO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- ACCELERO_CS_HIGH();
-
- /* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
- MAGNETO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = MAGNETO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(MAGNETO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- MAGNETO_CS_HIGH();
-
-
- /* Configure the Gyroscope Control pins ---------------------------------*/
- /* Enable CS GPIO clock and Configure GPIO PIN for Gyroscope Chip select */
- GYRO_CS_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = GYRO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(GYRO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- GYRO_CS_HIGH();
-
- /* Enable INT1, INT2 GPIO clock and Configure GPIO PINs to detect Interrupts */
- GYRO_INT1_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = GYRO_INT1_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStructure.Pull= GPIO_NOPULL;
- HAL_GPIO_Init(GYRO_INT1_GPIO_PORT, &GPIO_InitStructure);
-
- GYRO_INT2_GPIO_CLK_ENABLE();
- GPIO_InitStructure.Pin = GYRO_INT2_PIN;
- HAL_GPIO_Init(GYRO_INT2_GPIO_PORT, &GPIO_InitStructure);
-
- SPIx_Init();
-
-}
-
-
-/**
- * @brief de-Configures GYRO SPI interface.
- * @retval None
- */
-void GYRO_IO_DeInit(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
- /* Enable CS GPIO clock */
- GYRO_CS_GPIO_CLK_ENABLE();
-
- GPIO_InitStructure.Pin = GYRO_CS_PIN;
- GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStructure.Pull = GPIO_NOPULL;
- GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(GYRO_CS_GPIO_PORT, &GPIO_InitStructure);
-
- /* Deselect : Chip Select high */
- GYRO_CS_HIGH();
-
- GYRO_INT1_GPIO_CLK_ENABLE();
- GYRO_INT2_GPIO_CLK_ENABLE();
-
- /* Uninitialize the INT1/INT2 Pins */
- HAL_GPIO_DeInit(GYRO_INT1_GPIO_PORT, GYRO_INT1_PIN);
- HAL_GPIO_DeInit(GYRO_INT2_GPIO_PORT, GYRO_INT2_PIN);
-
- /* Uninitialize SPI bus */
- SPIx_DeInit();
-}
-
-/**
- * @brief Writes one byte to the GYRO.
- * @param pBuffer : pointer to the buffer containing the data to be written to the GYRO.
- * @param WriteAddr : GYRO's internal address to write to.
- * @param NumByteToWrite: Number of bytes to write.
- * @retval None
- */
-void GYRO_IO_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite)
-{
- /* Configure the MS bit:
- - When 0, the address will remain unchanged in multiple read/write commands.
- - When 1, the address will be auto incremented in multiple read/write commands.
- */
- if(NumByteToWrite > 0x01)
- {
- WriteAddr |= (uint8_t)MULTIPLEBYTE_CMD;
- }
- /* Set chip select Low at the start of the transmission */
- GYRO_CS_LOW();
- __SPI_DIRECTION_2LINES(&SpiHandle);
-
- /* Send the Address of the indexed register */
- SPIx_WriteRead(WriteAddr);
-
- /* Send the data that will be written into the device (MSB First) */
- while(NumByteToWrite >= 0x01)
- {
- SPIx_WriteRead(*pBuffer);
- NumByteToWrite--;
- pBuffer++;
- }
-
- /* Set chip select High at the end of the transmission */
- GYRO_CS_HIGH();
-}
-
-/**
- * @brief Reads a block of data from the GYROSCOPE.
- * @param pBuffer : pointer to the buffer that receives the data read from the GYROSCOPE.
- * @param ReadAddr : GYROSCOPE's internal address to read from.
- * @param NumByteToRead : number of bytes to read from the GYROSCOPE.
- * @retval None
- */
-void GYRO_IO_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead)
-{
- if(NumByteToRead > 0x01)
- {
- ReadAddr |= (uint8_t)(READWRITE_CMD | MULTIPLEBYTE_CMD);
- }
- else
- {
- ReadAddr |= (uint8_t)READWRITE_CMD;
- }
- /* Set chip select Low at the start of the transmission */
- GYRO_CS_LOW();
- __SPI_DIRECTION_2LINES(&SpiHandle);
- /* Send the Address of the indexed register */
- SPIx_WriteRead(ReadAddr);
-
- /* Receive the data that will be read from the device (MSB First) */
- while(NumByteToRead > 0x00)
- {
- /* Send dummy byte (0x00) to generate the SPI clock to GYROSCOPE (Slave device) */
- *pBuffer = SPIx_WriteRead(0x00);
- NumByteToRead--;
- pBuffer++;
- }
-
- /* Set chip select High at the end of the transmission */
- GYRO_CS_HIGH();
-}
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#if defined(HAL_I2C_MODULE_ENABLED)
-/********************************* LINK MFX ***********************************/
-/**
- * @brief Initializes MFX low level.
- * @retval None
- */
-void MFX_IO_Init(void)
-{
- /* I2C2 init */
- I2C2_Init();
-}
-/**
- * @brief Deinitializes MFX low level.
- * @retval None
- */
-void MFX_IO_DeInit(void)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable wakeup gpio clock */
- IDD_WAKEUP_GPIO_CLK_ENABLE();
-
- /* MFX wakeup pin configuration */
- GPIO_InitStruct.Pin = IDD_WAKEUP_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- GPIO_InitStruct.Pull = GPIO_PULLDOWN;
- HAL_GPIO_Init(IDD_WAKEUP_GPIO_PORT, &GPIO_InitStruct);
-
- /* DeInit interrupt pin : disable IRQ before to avoid spurious interrupt */
- HAL_NVIC_DisableIRQ((IRQn_Type)(IDD_INT_EXTI_IRQn));
- IDD_INT_GPIO_CLK_ENABLE();
- HAL_GPIO_DeInit(IDD_INT_GPIO_PORT, IDD_INT_PIN);
-
- /* I2C2 Deinit */
- I2C2_DeInit();
-}
-
-/**
- * @brief Configures MFX low level interrupt.
- * @retval None
- */
-void MFX_IO_ITConfig(void)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable the GPIO clock */
- IDD_INT_GPIO_CLK_ENABLE();
-
- /* MFX_OUT_IRQ (normally used for EXTI_WKUP) */
- GPIO_InitStruct.Pin = IDD_INT_PIN;
- GPIO_InitStruct.Pull = GPIO_PULLDOWN;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
- HAL_GPIO_Init(IDD_INT_GPIO_PORT, &GPIO_InitStruct);
-
- /* Enable and set GPIO EXTI Interrupt to the lowest priority */
- HAL_NVIC_SetPriority((IRQn_Type)(IDD_INT_EXTI_IRQn), 0x0F, 0x0F);
- HAL_NVIC_EnableIRQ((IRQn_Type)(IDD_INT_EXTI_IRQn));
-}
-
-/**
- * @brief Configures MFX wke up pin.
- * @retval None
- */
-void MFX_IO_EnableWakeupPin(void)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable wakeup gpio clock */
- IDD_WAKEUP_GPIO_CLK_ENABLE();
-
- /* MFX wakeup pin configuration */
- GPIO_InitStruct.Pin = IDD_WAKEUP_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(IDD_WAKEUP_GPIO_PORT, &GPIO_InitStruct);
-}
-
-/**
- * @brief Wakeup MFX.
- * @retval None
- */
-void MFX_IO_Wakeup(void)
-{
- /* Set Wakeup pin to high to wakeup Idd measurement component from standby mode */
- HAL_GPIO_WritePin(IDD_WAKEUP_GPIO_PORT, IDD_WAKEUP_PIN, GPIO_PIN_SET);
-
- /* Wait */
- HAL_Delay(1);
-
- /* Set gpio pin basck to low */
- HAL_GPIO_WritePin(IDD_WAKEUP_GPIO_PORT, IDD_WAKEUP_PIN, GPIO_PIN_RESET);
-}
-
-/**
- * @brief MFX writes single data.
- * @param Addr: I2C address
- * @param Reg: Register address
- * @param Value: Data to be written
- * @retval None
- */
-void MFX_IO_Write(uint16_t Addr, uint8_t Reg, uint8_t Value)
-{
- I2C2_WriteData(Addr, Reg, I2C_MEMADD_SIZE_8BIT, Value);
-}
-
-/**
- * @brief MFX reads single data.
- * @param Addr: I2C address
- * @param Reg: Register address
- * @retval Read data
- */
-uint8_t MFX_IO_Read(uint16_t Addr, uint8_t Reg)
-{
- return I2C2_ReadData(Addr, Reg, I2C_MEMADD_SIZE_8BIT);
-}
-
-/**
- * @brief MFX reads multiple data.
- * @param Addr: I2C address
- * @param Reg: Register address
- * @param Buffer: Pointer to data buffer
- * @param Length: Length of the data
- * @retval Number of read data
- */
-uint16_t MFX_IO_ReadMultiple(uint16_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
-{
- return I2C2_ReadBuffer(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
-}
-
-/**
- * @brief MFX writes multiple data.
- * @param Addr: I2C address
- * @param Reg: Register address
- * @param Buffer: Pointer to data buffer
- * @param Length: Length of the data
- * @retval None
- */
-void MFX_IO_WriteMultiple(uint16_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
-{
- I2C2_WriteBuffer(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
-}
-
-/**
- * @brief MFX delay
- * @param Delay: Delay in ms
- * @retval None
- */
-void MFX_IO_Delay(uint32_t Delay)
-{
- HAL_Delay(Delay);
-}
-
-
-/********************************* LINK AUDIO *********************************/
-/**
- * @brief Initializes Audio low level.
- * @retval None
- */
-void AUDIO_IO_Init(void)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable Reset GPIO Clock */
- AUDIO_RESET_GPIO_CLK_ENABLE();
-
- /* Audio reset pin configuration */
- GPIO_InitStruct.Pin = AUDIO_RESET_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(AUDIO_RESET_GPIO, &GPIO_InitStruct);
-
- /* I2C bus init */
- I2C1_Init();
-
- /* Power Down the codec */
- CODEC_AUDIO_POWER_OFF();
-
- /* wait for a delay to insure registers erasing */
- HAL_Delay(5);
-
- /* Power on the codec */
- CODEC_AUDIO_POWER_ON();
-
- /* wait for a delay to insure registers erasing */
- HAL_Delay(5);
-}
-
-/**
- * @brief Deinitializes Audio low level.
- * @retval None
- */
-void AUDIO_IO_DeInit(void) /* TO DO */
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /***********************************************************************/
- /* In case of battery-supplied powered, there is no audio codec-based
- features available. Set audio codec I/O default setting */
- /***********************************************************************/
- __HAL_RCC_GPIOE_CLK_ENABLE();
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP ;
- GPIO_InitStruct.Pin = (GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6);
- GPIO_InitStruct.Pull = GPIO_PULLDOWN;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
- HAL_GPIO_WritePin(GPIOE, GPIO_PIN_2, GPIO_PIN_RESET);
- HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
- HAL_GPIO_WritePin(GPIOE, GPIO_PIN_4, GPIO_PIN_RESET);
- HAL_GPIO_WritePin(GPIOE, GPIO_PIN_5, GPIO_PIN_RESET);
- HAL_GPIO_WritePin(GPIOE, GPIO_PIN_6, GPIO_PIN_RESET);
-
- /* I2C bus Deinit */
- I2C1_DeInit();
-}
-
-/**
- * @brief Writes a single data.
- * @param Addr: I2C address
- * @param Reg: Reg address
- * @param Value: Data to be written
- * @retval None
- */
-void AUDIO_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
-{
- I2C1_WriteBuffer(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, &Value, 1);
-}
-
-/**
- * @brief Reads a single data.
- * @param Addr: I2C address
- * @param Reg: Reg address
- * @retval Data to be read
- */
-uint8_t AUDIO_IO_Read(uint8_t Addr, uint8_t Reg)
-{
- uint8_t Read_Value = 0;
-
- I2C1_ReadBuffer((uint16_t) Addr, (uint16_t) Reg, I2C_MEMADD_SIZE_8BIT, &Read_Value, 1);
-
- return Read_Value;
-}
-
-/**
- * @brief AUDIO Codec delay
- * @param Delay: Delay in ms
- * @retval None
- */
-void AUDIO_IO_Delay(uint32_t Delay)
-{
- HAL_Delay(Delay);
-}
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery.h
--- a/stm32l476g_discovery.h Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,566 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l476g_discovery.h
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief This file contains definitions for STM32L476G_DISCOVERY's LEDs,
- * push-buttons hardware resources (MB1184).
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L476G_DISCOVERY_H
-#define __STM32L476G_DISCOVERY_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- * @brief Define for STM32L476G_DISCOVERY board
- */
-#if !defined (USE_STM32L476G_DISCO_REVC) && !defined (USE_STM32L476G_DISCO_REVB) && !defined (USE_STM32L476G_DISCO_REVA)
-#define USE_STM32L476G_DISCO_REVC
-#endif
-
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l4xx_hal.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_Common
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Exported_Types Exported Types
- * @{
- */
-
-/**
- * @brief LED Types Definition
- */
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-typedef enum
-{
- LED4 = 0,
- LED5 = 1,
- LED_RED = LED4,
- LED_GREEN = LED5
-}Led_TypeDef;
-#elif defined (USE_STM32L476G_DISCO_REVA)
-typedef enum
-{
- LED3 = 0,
- LED4 = 1,
- LED_RED = LED3,
- LED_GREEN = LED4
-}Led_TypeDef;
-#endif
-
-/**
- * @brief JOYSTICK Types Definition
- */
-typedef enum
-{
- JOY_SEL = 0,
- JOY_LEFT = 1,
- JOY_RIGHT = 2,
- JOY_DOWN = 3,
- JOY_UP = 4,
- JOY_NONE = 5
-}JOYState_TypeDef;
-
-typedef enum
-{
- JOY_MODE_GPIO = 0,
- JOY_MODE_EXTI = 1
-}JOYMode_TypeDef;
-
-typedef enum
-{
- SUPPLY_MODE_ERROR = 0,
- SUPPLY_MODE_EXTERNAL = 1,
- SUPPLY_MODE_BATTERY = 2
-}SupplyMode_TypeDef;
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_Exported_Constants Exported Constants
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_BATTERY BATTERY Detection Constants
- * @{
- */
-#define BATTERY_DETECTION_PIN GPIO_PIN_3
-#define BATTERY_DETECTION_GPIO_PORT GPIOB
-#define BATTERY_DETECTION_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define BATTERY_DETECTION_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_LED LED Constants
- * @{
- */
-#define LEDn 2
-
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-#define LED4_PIN GPIO_PIN_2
-#define LED4_GPIO_PORT GPIOB
-#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-
-#define LED5_PIN GPIO_PIN_8
-#define LED5_GPIO_PORT GPIOE
-#define LED5_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define LED5_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-
-#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if((__LED__) == LED4) { LED4_GPIO_CLK_ENABLE(); } else \
- if((__LED__) == LED5) { LED5_GPIO_CLK_ENABLE(); } } while(0)
-
-#define LEDx_GPIO_CLK_DISABLE(__LED__) do { if((__LED__) == LED4) { LED4_GPIO_CLK_DISABLE(); } else \
- if((__LED__) == LED5) { LED5_GPIO_CLK_DISABLE(); } } while(0)
-
-#elif defined (USE_STM32L476G_DISCO_REVA)
-#define LED3_PIN GPIO_PIN_2
-#define LED3_GPIO_PORT GPIOB
-#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-
-#define LED4_PIN GPIO_PIN_8
-#define LED4_GPIO_PORT GPIOE
-#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-
-#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if((__LED__) == LED3) { LED3_GPIO_CLK_ENABLE(); } else \
- if((__LED__) == LED4) { LED4_GPIO_CLK_ENABLE(); } } while(0)
-
-#define LEDx_GPIO_CLK_DISABLE(__LED__) do { if((__LED__) == LED3) { LED3_GPIO_CLK_DISABLE(); } else \
- if((__LED__) == LED4) { LED4_GPIO_CLK_DISABLE(); } } while(0)
-
-#endif
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_BUTTON BUTTON Constants
- * @{
- */
-#define JOYn 5
-
-/**
-* @brief Joystick Right push-button
-*/
-#define RIGHT_JOY_PIN GPIO_PIN_2 /* PA.02 */
-#define RIGHT_JOY_GPIO_PORT GPIOA
-#define RIGHT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define RIGHT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
-#define RIGHT_JOY_EXTI_IRQn EXTI2_IRQn
-
-/**
-* @brief Joystick Left push-button
-*/
-#define LEFT_JOY_PIN GPIO_PIN_1 /* PA.01 */
-#define LEFT_JOY_GPIO_PORT GPIOA
-#define LEFT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define LEFT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
-#define LEFT_JOY_EXTI_IRQn EXTI1_IRQn
-
-/**
-* @brief Joystick Up push-button
-*/
-#define UP_JOY_PIN GPIO_PIN_3 /* PA.03 */
-#define UP_JOY_GPIO_PORT GPIOA
-#define UP_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define UP_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
-#define UP_JOY_EXTI_IRQn EXTI3_IRQn
-
-/**
- * @brief Joystick Down push-button
- */
-#define DOWN_JOY_PIN GPIO_PIN_5 /* PA.05 */
-#define DOWN_JOY_GPIO_PORT GPIOA
-#define DOWN_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define DOWN_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
-#define DOWN_JOY_EXTI_IRQn EXTI9_5_IRQn
-
-/**
- * @brief Joystick Sel push-button
- */
-#define SEL_JOY_PIN GPIO_PIN_0 /* PA.00 */
-#define SEL_JOY_GPIO_PORT GPIOA
-#define SEL_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define SEL_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
-#define SEL_JOY_EXTI_IRQn EXTI0_IRQn
-
-#define JOYx_GPIO_CLK_ENABLE(__JOY__) do { if((__JOY__) == JOY_SEL) { SEL_JOY_GPIO_CLK_ENABLE(); } else \
- if((__JOY__) == JOY_DOWN) { DOWN_JOY_GPIO_CLK_ENABLE(); } else \
- if((__JOY__) == JOY_LEFT) { LEFT_JOY_GPIO_CLK_ENABLE(); } else \
- if((__JOY__) == JOY_RIGHT) { RIGHT_JOY_GPIO_CLK_ENABLE(); } else \
- if((__JOY__) == JOY_UP) { UP_JOY_GPIO_CLK_ENABLE(); } } while(0)
-
-#define JOYx_GPIO_CLK_DISABLE(__JOY__) do { if((__JOY__) == JOY_SEL) { SEL_JOY_GPIO_CLK_DISABLE(); } else \
- if((__JOY__) == JOY_DOWN) { DOWN_JOY_GPIO_CLK_DISABLE(); } else \
- if((__JOY__) == JOY_LEFT) { LEFT_JOY_GPIO_CLK_DISABLE(); } else \
- if((__JOY__) == JOY_RIGHT) { RIGHT_JOY_GPIO_CLK_DISABLE(); } else \
- if((__JOY__) == JOY_UP) { UP_JOY_GPIO_CLK_DISABLE(); } } while(0)
-
-#define JOY_ALL_PINS (RIGHT_JOY_PIN | LEFT_JOY_PIN | UP_JOY_PIN | DOWN_JOY_PIN | SEL_JOY_PIN)
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_BUS BUS Constants
- * @{
- */
-#if defined(HAL_SPI_MODULE_ENABLED)
-/*##################### SPI2 ###################################*/
-#define DISCOVERY_SPIx SPI2
-#define DISCOVERY_SPIx_CLOCK_ENABLE() __HAL_RCC_SPI2_CLK_ENABLE()
-#define DISCOVERY_SPIx_CLOCK_DISABLE() __HAL_RCC_SPI2_CLK_DISABLE()
-#define DISCOVERY_SPIx_GPIO_PORT GPIOD /* GPIOD */
-#define DISCOVERY_SPIx_AF GPIO_AF5_SPI2
-#define DISCOVERY_SPIx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
-#define DISCOVERY_SPIx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
-#define DISCOVERY_SPIx_GPIO_FORCE_RESET() __HAL_RCC_SPI2_FORCE_RESET()
-#define DISCOVERY_SPIx_GPIO_RELEASE_RESET() __HAL_RCC_SPI2_RELEASE_RESET()
-#define DISCOVERY_SPIx_SCK_PIN GPIO_PIN_1 /* PD.01*/
-#define DISCOVERY_SPIx_MISO_PIN GPIO_PIN_3 /* PD.03 */
-#define DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_4 /* PD.04 */
-
-/* Maximum Timeout values for flags waiting loops. These timeouts are not based
- on accurate values, they just guarantee that the application will not remain
- stuck if the SPI communication is corrupted.
- You may modify these timeout values depending on CPU frequency and application
- conditions (interrupts routines ...). */
-#define SPIx_TIMEOUT_MAX ((uint32_t)0x1000)
-/* Read/Write command */
-#define READWRITE_CMD ((uint8_t)0x80)
-/* Multiple byte read/write command */
-#define MULTIPLEBYTE_CMD ((uint8_t)0x40)
-/* Dummy Byte Send by the SPI Master device in order to generate the Clock to the Slave device */
-#define DUMMY_BYTE ((uint8_t)0x00)
-
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#if defined(HAL_I2C_MODULE_ENABLED)
-/*##################### I2C1 ###################################*/
-/* User can use this section to tailor I2C1 instance used and associated
- resources */
-/* Definition for I2C1 Pins */
-#define DISCOVERY_I2C1_SCL_GPIO_PORT GPIOB
-#define DISCOVERY_I2C1_SDA_GPIO_PORT GPIOB
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-#define DISCOVERY_I2C1_SCL_PIN GPIO_PIN_6
-#define DISCOVERY_I2C1_SDA_PIN GPIO_PIN_7
-#elif defined (USE_STM32L476G_DISCO_REVA)
-#define DISCOVERY_I2C1_SCL_PIN GPIO_PIN_8
-#define DISCOVERY_I2C1_SDA_PIN GPIO_PIN_9
-#endif
-#define DISCOVERY_I2C1_SCL_SDA_AF GPIO_AF4_I2C1
-
-/* Definition for I2C1 clock resources */
-#define DISCOVERY_I2C1 I2C1
-#define DISCOVERY_I2C1_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
-#define DISCOVERY_I2C1_CLK_DISABLE() __HAL_RCC_I2C1_CLK_DISABLE()
-#define DISCOVERY_I2C1_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define DISCOVERY_I2C1_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define DISCOVERY_I2C1_SDA_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define DISCOVERY_I2C1_SCL_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define DISCOVERY_I2C1_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
-#define DISCOVERY_I2C1_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
-
-/* Definition for I2C1's NVIC */
-#define DISCOVERY_I2C1_EV_IRQn I2C1_EV_IRQn
-#define DISCOVERY_I2C1_EV_IRQHandler I2C1_EV_IRQHandler
-#define DISCOVERY_I2C1_ER_IRQn I2C1_ER_IRQn
-#define DISCOVERY_I2C1_ER_IRQHandler I2C1_ER_IRQHandler
-
-/* I2C TIMING Register define when I2C clock source is SYSCLK */
-/* I2C TIMING is calculated in case of the I2C Clock source is the SYSCLK = 80 MHz */
-/* Set 0x90112626 value to reach 100 KHz speed (Rise time = 640ns, Fall time = 20ns) */
-#ifndef DISCOVERY_I2C1_TIMING
- #define DISCOVERY_I2C1_TIMING 0x90112626
-#endif /* DISCOVERY_I2C1_TIMING */
-
-/* I2C clock speed configuration (in Hz)
- WARNING:
- Make sure that this define is not already declared in other files (ie.
- stm324xg_discovery.h file). It can be used in parallel by other modules. */
-#ifndef BSP_I2C_SPEED
- #define BSP_I2C_SPEED 100000
-#endif /* BSP_I2C_SPEED */
-
-
-/* Audio codec I2C address */
-#define AUDIO_I2C_ADDRESS ((uint16_t) 0x94)
-
-/* Maximum Timeout values for flags waiting loops. These timeouts are not based
- on accurate values, they just guarantee that the application will not remain
- stuck if the I2C communication is corrupted.
- You may modify these timeout values depending on CPU frequency and application
- conditions (interrupts routines ...). */
-#define DISCOVERY_I2C1_TIMEOUT_MAX 3000
-
-
-/*##################### I2C2 ###################################*/
-/* User can use this section to tailor I2C2 instance used and associated
- resources */
-/* Definition for I2C2 Pins */
-#define DISCOVERY_I2C2_SCL_PIN GPIO_PIN_10
-#define DISCOVERY_I2C2_SCL_GPIO_PORT GPIOB
-#define DISCOVERY_I2C2_SDA_PIN GPIO_PIN_11
-#define DISCOVERY_I2C2_SDA_GPIO_PORT GPIOB
-#define DISCOVERY_I2C2_SCL_SDA_AF GPIO_AF4_I2C2
-/* Definition for I2C2 clock resources */
-#define DISCOVERY_I2C2 I2C2
-#define DISCOVERY_I2C2_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE()
-#define DISCOVERY_I2C2_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE()
-#define DISCOVERY_I2C2_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define DISCOVERY_I2C2_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define DISCOVERY_I2C2_SDA_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define DISCOVERY_I2C2_SCL_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define DISCOVERY_I2C2_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET()
-#define DISCOVERY_I2C2_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET()
-
-/* Definition for I2C2's NVIC */
-#define DISCOVERY_I2C2_EV_IRQn I2C2_EV_IRQn
-#define DISCOVERY_I2C2_ER_IRQn I2C2_ER_IRQn
-
-/* I2C TIMING Register define when I2C clock source is SYSCLK */
-/* I2C TIMING is calculated in case of the I2C Clock source is the SYSCLK = 80 MHz */
-/* Set 0x90112626 value to reach 100 KHz speed (Rise time = 640ns, Fall time = 20ns) */
-#ifndef DISCOVERY_I2C2_TIMING
- #define DISCOVERY_I2C2_TIMING 0x90112626
-#endif /* DISCOVERY_I2C2_TIMING */
-
-/* I2C clock speed configuration (in Hz)
- WARNING:
- Make sure that this define is not already declared in other files (ie.
- stm324xg_discovery.h file). It can be used in parallel by other modules. */
-#ifndef BSP_I2C_SPEED
- #define BSP_I2C_SPEED 100000
-#endif /* BSP_I2C_SPEED */
-
-#define IDD_I2C_ADDRESS ((uint16_t) 0x84)
-
-/* Maximum Timeout values for flags waiting loops. These timeouts are not based
- on accurate values, they just guarantee that the application will not remain
- stuck if the I2C communication is corrupted.
- You may modify these timeout values depending on CPU frequency and application
- conditions (interrupts routines ...). */
-#define DISCOVERY_I2C2_TIMEOUT_MAX 3000
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-/*##################### Accelerometer ##########################*/
-/**
- * @brief Accelerometer Chip Select macro definition
- */
-#define ACCELERO_CS_LOW() HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_RESET)
-#define ACCELERO_CS_HIGH() HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_SET)
-
-/**
- * @brief Accelerometer SPI Interface pins
- */
-#define ACCELERO_CS_GPIO_PORT GPIOE /* GPIOE */
-#define ACCELERO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define ACCELERO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-#define ACCELERO_CS_PIN GPIO_PIN_0 /* PE.00 */
-
-/**
- * @brief Accelerometer Interrupt pins
- */
-#define ACCELERO_XLINT_GPIO_PORT GPIOE /* GPIOE */
-#define ACCELERO_XLINT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define ACCELERO_XLINT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-#define ACCELERO_XLINT_PIN GPIO_PIN_1 /* PE.01 */
-#define ACCELERO_XLINT_EXTI_IRQn EXTI1_IRQn
-
-/*##################### Magnetometer ##########################*/
-/**
- * @brief Magnetometer Chip Select macro definition
- */
-#define MAGNETO_CS_LOW() HAL_GPIO_WritePin(MAGNETO_CS_GPIO_PORT, MAGNETO_CS_PIN, GPIO_PIN_RESET)
-#define MAGNETO_CS_HIGH() HAL_GPIO_WritePin(MAGNETO_CS_GPIO_PORT, MAGNETO_CS_PIN, GPIO_PIN_SET)
-
-/**
- * @brief Magnetometer SPI Interface pins
- */
-#define MAGNETO_CS_GPIO_PORT GPIOC /* GPIOC */
-#define MAGNETO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
-#define MAGNETO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
-#define MAGNETO_CS_PIN GPIO_PIN_0 /* PC.00 */
-
-
-/**
- * @brief Magnetometer Interrupt pins
- */
-#define MAGNETO_INT_GPIO_PORT GPIOC /* GPIOC */
-#define MAGNETO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
-#define MAGNETO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
-#define MAGNETO_INT1_PIN GPIO_PIN_1 /* PC.01 */
-#define MAGNETO_INT1_EXTI_IRQn EXTI1_IRQn
-
-#define MAGNETO_DRDY_GPIO_PORT GPIOC /* GPIOC */
-#define MAGNETO_DRDY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
-#define MAGNETO_DRDY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
-#define MAGNETO_DRDY_PIN GPIO_PIN_2 /* PC.01 */
-
-
-/*##################### Audio Codec ##########################*/
-/**
- * @brief Audio codec chip reset definition
- */
-/* Audio codec power on/off macro definition */
-#define CODEC_AUDIO_POWER_OFF() HAL_GPIO_WritePin(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, GPIO_PIN_RESET)
-#define CODEC_AUDIO_POWER_ON() HAL_GPIO_WritePin(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, GPIO_PIN_SET)
-
-/* Audio Reset Pin definition */
-#define AUDIO_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define AUDIO_RESET_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-#define AUDIO_RESET_PIN GPIO_PIN_3
-#define AUDIO_RESET_GPIO GPIOE
-
-/*##################### Gyroscope ##########################*/
-/**
- * @brief Gyroscope Chip Select macro definition
- */
-#define GYRO_CS_LOW() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_RESET)
-#define GYRO_CS_HIGH() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_SET)
-
-/**
- * @brief Gyroscope SPI Interface pins
- */
-#define GYRO_CS_GPIO_PORT GPIOD /* GPIOD */
-#define GYRO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
-#define GYRO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
-#define GYRO_CS_PIN GPIO_PIN_7 /* PD.07 */
-
-/**
- * @brief Gyroscope Interrupt pins
- */
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-#define GYRO_INT1_GPIO_PORT GPIOD /* GPIOD */
-#define GYRO_INT1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
-#define GYRO_INT1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
-#define GYRO_INT1_PIN GPIO_PIN_2 /* PD.02 */
-#define GYRO_INT1_EXTI_IRQn EXTI2_IRQn
-#define GYRO_INT2_GPIO_PORT GPIOB /* GPIOB */
-#define GYRO_INT2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define GYRO_INT2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define GYRO_INT2_PIN GPIO_PIN_8 /* PB.08 */
-#define GYRO_INT2_EXTI_IRQn EXTI9_5_IRQn
-#elif defined (USE_STM32L476G_DISCO_REVA)
-#define GYRO_INT1_GPIO_PORT GPIOB /* GPIOB */
-#define GYRO_INT1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define GYRO_INT1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define GYRO_INT1_PIN GPIO_PIN_6 /* PB.06 */
-#define GYRO_INT1_EXTI_IRQn EXTI9_5_IRQn
-#define GYRO_INT2_GPIO_PORT GPIOB /* GPIOB */
-#define GYRO_INT2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
-#define GYRO_INT2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
-#define GYRO_INT2_PIN GPIO_PIN_7 /* PB.07 */
-#define GYRO_INT2_EXTI_IRQn EXTI9_5_IRQn
-#endif
-
-/*##################### Idd ##########################*/
-/**
- * @brief Idd current measurement interface pins
- */
-#define IDD_INT_GPIO_PORT GPIOC /* GPIOC */
-#define IDD_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
-#define IDD_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
-#define IDD_INT_PIN GPIO_PIN_13 /* PC.13 */
-#define IDD_INT_EXTI_IRQn EXTI15_10_IRQn
-
-#define IDD_WAKEUP_GPIO_PORT GPIOA /* GPIOA */
-#define IDD_WAKEUP_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define IDD_WAKEUP_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
-#define IDD_WAKEUP_PIN GPIO_PIN_4 /* PA.04 */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup STM32L476G_DISCOVERY_Exported_Functions Exported Functions
- * @{
- */
-uint32_t BSP_GetVersion(void);
-SupplyMode_TypeDef BSP_SupplyModeDetection(void);
-void BSP_LED_Init(Led_TypeDef Led);
-void BSP_LED_DeInit(Led_TypeDef Led);
-void BSP_LED_On(Led_TypeDef Led);
-void BSP_LED_Off(Led_TypeDef Led);
-void BSP_LED_Toggle(Led_TypeDef Led);
-uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode);
-void BSP_JOY_DeInit(void);
-JOYState_TypeDef BSP_JOY_GetState(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L476G_DISCOVERY_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery_audio.c
--- a/stm32l476g_discovery_audio.c Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1070 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l476g_discovery_audio.c
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief This file provides a set of functions needed to manage the
- * Audio driver for the STM32L476G-Discovery board.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/*==============================================================================
- User NOTES
-
-1. How To use this driver:
---------------------------
- + This driver supports STM32L4xx devices on STM32L476G-Discovery (MB1184) Discovery boards.
- a) to play an audio file (all functions names start by BSP_AUDIO_OUT_xxx)
- b) to record an audio file through MP34DT01TR, ST MEMS (all functions names start by BSP_AUDIO_IN_xxx)
-
-a) PLAY A FILE:
-==============
- + Call the function BSP_AUDIO_OUT_Init(
- OutputDevice: physical output mode (OUTPUT_DEVICE_SPEAKER,
- OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH)
- Volume : Initial volume to be set (0 is min (mute), 100 is max (100%)
- AudioFreq : Audio frequency in Hz (8000, 16000, 22500, 32000...)
- this parameter is relative to the audio file/stream type.
- )
- This function configures all the hardware required for the audio application (codec, I2C, SAI,
- GPIOs, DMA and interrupt if needed). This function returns AUDIO_OK if configuration is OK.
- If the returned value is different from AUDIO_OK or the function is stuck then the communication with
- the audio codec has failed.
- - OUTPUT_DEVICE_SPEAKER : only speaker will be set as output for the audio stream.
- - OUTPUT_DEVICE_HEADPHONE: only headphones will be set as output for the audio stream.
- - OUTPUT_DEVICE_BOTH : both Speaker and Headphone are used as outputs for the audio stream
- at the same time.
-
- + Call the function BSP_AUDIO_OUT_RegisterCallbacks to register user callbacks
- required to manage audio data streaming towards the audio codec (ErrorCallback(),
- HalfTransfer_CallBack() and TransferComplete_CallBack()).
-
- + Call the function BSP_AUDIO_OUT_Play() to start audio playback (for the first time).
- + Call the function BSP_AUDIO_OUT_Pause() to pause audio playabck
- + Call the function BSP_AUDIO_OUT_Resume() to resume audio playback.
- Note. After calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() should be called
- for resume (it is not allowed to call BSP_AUDIO_OUT_Play() in this case).
- Note. This function should be called only when the audio file is played or paused (not stopped).
- + Call the function BSP_AUDIO_OUT_Stop() to stop audio playback.
- + To modify the volume level, the sampling frequency, the device output mode,
- the mute status or the audio configuration or the stop, use the functions: BSP_AUDIO_OUT_SetVolume(),
- AUDIO_OUT_SetFrequency(), BSP_AUDIO_OUT_SetOutputMode(), BSP_AUDIO_OUT_SetMute()and
- BSP_AUDIO_OUT_ChangeAudioConfig().
-
-Driver architecture:
---------------------
- + This driver provides the audio layer high level API: it consists in functions
- exported in the stm32l476g_discovery_audio.h file (e.g. BSP_AUDIO_OUT_Init(),
- BSP_AUDIO_OUT_Play(), ...).
- + This driver also includes the Media Access Layer (MAL): it consists in
- functions allowing to access setup the audio devices. These functions
- are included as local functions into the stm32l476g_discovery_audio.c file
- (e.g. AUDIO_SAIx_Init()).
-
-Known Limitations:
-------------------
- 1- Communication with the audio codec (through I2C) may be corrupted if it is interrupted by some
- user interrupt routines (in this case, interrupts could be disabled just before the start of
- communication then re-enabled when it is over). Note that this communication is only done at
- the configuration phase (BSP_AUDIO_OUT_Init() or BSP_AUDIO_OUT_Stop()) and when Volume control modification is
- performed (BSP_AUDIO_OUT_SetVolume() or BSP_AUDIO_OUT_SetMute()or BSP_AUDIO_OUT_SetOutputMode()).
- When the audio data is played, no communication is required with the audio codec.
- 2- Parsing of audio file is not implemented (in order to determine audio file properties: Mono/Stereo, Data size,
- File size, Audio Frequency, Audio Data header size ...). The configuration is fixed for the given audio file.
- 3- Supports only 16-bits audio data size.
-
-b) RECORD A FILE:
-================
- + Call the function BSP_AUDIO_IN_Init(
- AudioFreq: Audio frequency in Hz (8000, 16000, 22500, 32000 ...)
- )
- This function configures all the hardware required for the audio application (DFSDM,
- GPIOs, DMA and interrupt if needed). This function returns AUDIO_OK if the
- configuration completes successfully.
-
- + Call the function BSP_AUDIO_IN_RegisterCallbacks to register user callbacks
- used to stream audio data toward the record buffer (ErrorCallback(),
- HalfTransfer_CallBack() and TransferComplete_CallBack()).
-
- + Call the function BSP_AUDIO_IN_Record(
- pbuf Main buffer pointer for the recorded data storing
- size Current size of the recorded buffer
- )
- to start recording from the microphone.
-
- + Call the function AUDIO_IN_STOP() to stop recording
-==============================================================================*/
-
-/* Includes ------------------------------------------------------------------*/
-#include <string.h>
-#include "stm32l476g_discovery_audio.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_AUDIO STM32L476G-DISCOVERY AUDIO
- * @brief This file includes the low layer driver for cs43l22 Audio Codec
- * available on STM32L476G-Discovery board(MB1184).
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Private_Types Private Types
- * @{
- */
-typedef struct
-{
-
- Audio_CallbackTypeDef CbError; /* pointer to the callback function invoked when ... */
- Audio_CallbackTypeDef CbHalfTransfer; /* pointer to the callback function invoked when ... */
- Audio_CallbackTypeDef CbTransferComplete; /* pointer to the callback function invoked when ... */
-} AUDIO_OUT_TypeDef;
-
-typedef struct
-{
- DFSDM_Channel_HandleTypeDef hDfsdmLeftChannel; /* DFSDM channel handle used for left channel */
- DMA_HandleTypeDef hDmaDfsdmLeft; /* DMA handle used for DFSDM regular conversions on left channel */
- int32_t * LeftRecBuff; /* Buffers for left samples */
- uint32_t Frequency; /* Record Frequency */
- uint32_t BitResolution; /* Record bit resolution */
- uint32_t ChannelNbr; /* Record Channel Number */
- uint16_t * pRecBuf; /* Pointer to record user buffer */
- uint32_t RecSize; /* Size to record in mono, double size to record in stereo */
- Audio_CallbackTypeDef CbError; /* pointer to the callback function invoked when a DMA transfer fails */
- Audio_CallbackTypeDef CbHalfTransfer; /* pointer to the callback function invoked when half of the DMA transfer is completed */
- Audio_CallbackTypeDef CbTransferComplete; /* pointer to the callback function invoked when the DMA transfer is completed */
-} AUDIO_IN_TypeDef;
-
-/**
- * @}
- */
-
-/* Private defines ------------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Private_Constants Private Constants
- * @{
- */
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Private_Macros Private Macros
- * @{
- */
-/*### PLAY ###*/
-/* SCK(kHz) = SAI_CK_x/(SAIClockDivider*2*256) */
-#define SAIClockDivider(__FREQUENCY__) \
- (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 12 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 2 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 6 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 1 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 3 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 0 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 2 : 1 \
-
-/*### RECORD ###*/
-#define DFSDMOverSampling(__FREQUENCY__) \
- (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 256 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 256 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 128 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 128 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 64 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 64 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 32 : 16 \
-
-#define DFSDMClockDivider(__FREQUENCY__) \
- (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 24 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 4 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 24 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 4 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 24 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 4 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 32 : 32 \
-
-#define DFSDMFilterOrder(__FREQUENCY__) \
- (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? DFSDM_FILTER_SINC3_ORDER \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? DFSDM_FILTER_SINC3_ORDER \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? DFSDM_FILTER_SINC3_ORDER \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? DFSDM_FILTER_SINC3_ORDER \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? DFSDM_FILTER_SINC4_ORDER \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? DFSDM_FILTER_SINC4_ORDER \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? DFSDM_FILTER_SINC4_ORDER : DFSDM_FILTER_SINC5_ORDER \
-
-#define DFSDMRightBitShift(__FREQUENCY__) \
- (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 2 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 3 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 3 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 0 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 3 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 3 \
- : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 7 : 0 \
-
-/* Saturate the record PCM sample */
-#define SaturaLH(N, L, H) (((N)<(L))?(L):(((N)>(H))?(H):(N)))
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Private_Variables Private Variables
- * @{
- */
-/* Audio output context information */
-static AUDIO_OUT_TypeDef hAudioOut;
-
-/* Audio input context information */
-static AUDIO_IN_TypeDef hAudioIn;
-
-/* SAI DMA handle */
-static DMA_HandleTypeDef hDmaSai;
-/**
- * @}
- */
-
-/* Exported variables ---------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Exported_Variables Exported Variables
- * @{
- */
-/* SAIx handle */
-SAI_HandleTypeDef BSP_AUDIO_hSai;
-
-/* DFSDM filter handle */
-DFSDM_Filter_HandleTypeDef BSP_AUDIO_hDfsdmLeftFilter;
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Private_Functions Private Functions
- * @{
- */
-static void AUDIO_CODEC_Reset(void);
-static uint8_t AUDIO_SAIx_Init(uint32_t AudioFreq);
-static uint8_t AUDIO_SAIx_DeInit(void);
-static uint8_t AUDIO_DFSDMx_Init(uint32_t AudioFreq);
-static uint8_t AUDIO_DFSDMx_DeInit(void);
-static uint8_t AUDIO_SAIPLLConfig(uint32_t AudioFreq);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup STM32L476G_DISCOVERY_AUDIO_Exported_Functions
- * @{
- */
-
-/**
- * @brief Configures the audio codec related peripherals.
- * @param OutputDevice: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
- * or OUTPUT_DEVICE_BOTH.
- * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max))
- * @param AudioFreq: Audio frequency used to play the audio stream.ion.
- * @retval BSP AUDIO status
- * @note The SAI PLL input clock must be configure in the user application.
- * The SAI PLL configuration done within this function assumes that
- * the SAI PLL input clock runs at 8 MHz.
- */
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param hsai: SAI handle
- * @retval None
- */
-void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
-{
- /* Invoke the registered 'TransferComplete' function (if any) */
- if (hAudioOut.CbTransferComplete != (Audio_CallbackTypeDef)NULL)
- {
- hAudioOut.CbTransferComplete();
- }
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks.
- * @param hsai: SAI handle
- * @retval None
- */
-void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
-{
- /* Invoke the registered 'HalfTransfer' callback function (if any) */
- if (hAudioOut.CbHalfTransfer != (Audio_CallbackTypeDef)NULL)
- {
- hAudioOut.CbHalfTransfer();
- }
-}
-
-/**
- * @brief SAI error callbacks.
- * @param hsai: SAI handle
- * @retval None
- */
-void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
-{
- /* Invoke the registered 'ErrorCallback' callback function (if any) */
- if (hAudioOut.CbError != (Audio_CallbackTypeDef)NULL)
- {
- hAudioOut.CbError();
- }
-}
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L476G_EVAL_AUDIO_Exported_Functions
- * @{
- */
-
-/**
- * @brief Initializes micropone related peripherals.
- * @note This function assumes that the SAI input clock (through PLL_M)
- * is already configured and ready to be used.
- * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
- * @param BitRes: Audio frequency to be configured for the SAI peripheral.
- * @param ChnlNbr: Audio frequency to be configured for the SAI peripheral.
- * @retval BSP AUDIO status
- */
-uint8_t BSP_AUDIO_IN_Init(uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr)
-{
- /* Update the audio input context */
- hAudioIn.Frequency = AudioFreq;
- hAudioIn.BitResolution = BitRes;
- hAudioIn.ChannelNbr = ChnlNbr;
- hAudioIn.CbError = (Audio_CallbackTypeDef)NULL;
- hAudioIn.CbHalfTransfer = (Audio_CallbackTypeDef)NULL;
- hAudioIn.CbTransferComplete = (Audio_CallbackTypeDef)NULL;
-
- /* Configure the SAI PLL according to the requested audio frequency */
- if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Initializes the Digital Filter for Sigma-Delta Modulators interface */
- if(AUDIO_DFSDMx_Init(AudioFreq) != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
- }
-
-/**
- * @brief De-Initializes microphone related peripherals.
- * @retval BSP AUDIO status
-
- */
-uint8_t BSP_AUDIO_IN_DeInit(void)
-{
- /* De-initializes the Digital Filter for Sigma-Delta Modulators interface */
- if (AUDIO_DFSDMx_DeInit() != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Reset the audio input context */
- memset(&hAudioIn, 0, sizeof(hAudioIn));
-
- return AUDIO_OK;
-}
-
-/**
- * @brief Starts audio recording.
- * @param pbuf: Main buffer pointer for the recorded data storing
- * @param size: Current size of the recorded buffer
- * @note The Right channel is start at first with synchro on start of Left channel
- * @retval BSP AUDIO status
- */
-uint8_t BSP_AUDIO_IN_Record(uint16_t* pbuf, uint32_t size)
-{
- hAudioIn.pRecBuf = pbuf;
- hAudioIn.RecSize = size;
-
- /* Allocate hAudioIn.LeftRecBuff buffer */
-#if defined(BSP_AUDIO_USE_RTOS)
- hAudioIn.LeftRecBuff = (int32_t *)k_malloc(size * sizeof(int32_t));
-#else
- hAudioIn.LeftRecBuff = (int32_t *)malloc(size * sizeof(int32_t));
-#endif
- if(hAudioIn.LeftRecBuff == NULL)
- {
- return AUDIO_ERROR;
- }
-
- /* Call the Media layer start function for left channel */
- if(HAL_DFSDM_FilterRegularStart_DMA(&BSP_AUDIO_hDfsdmLeftFilter,
- (int32_t*)hAudioIn.LeftRecBuff,
- (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR)) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @brief Updates the audio frequency.
- * @param AudioFreq: Audio frequency used to record the audio stream.
- * @note This API should be called after the BSP_AUDIO_IN_Init() to adjust the
- * audio frequency.
- * @retval BSP AUDIO status
- */
-uint8_t BSP_AUDIO_IN_SetFrequency(uint32_t AudioFreq)
-{
- /* Configure the SAI PLL according to the requested audio frequency */
- if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* De-initializes the Digital Filter for Sigma-Delta Modulators interface */
- if(AUDIO_DFSDMx_DeInit() != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Initializes the Digital Filter for Sigma-Delta Modulators interface */
- if(AUDIO_DFSDMx_Init(AudioFreq) != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @brief Regular conversion complete callback.
- * @note In interrupt mode, user has to read conversion value in this function
- using HAL_DFSDM_FilterGetRegularValue.
- * @param hdfsdm_filter : DFSDM filter handle.
- * @retval None
- */
-void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
-{
- uint32_t index;
- uint32_t recbufsize = (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR);
-
- for(index = (recbufsize/2); index < recbufsize; index++)
- {
- hAudioIn.pRecBuf[index] = (uint16_t)(SaturaLH((hAudioIn.LeftRecBuff[index] >> 8), -32760, 32760));
- }
-
- /* Invoke the registered 'TransferComplete' function (if any) */
- if (hAudioIn.CbTransferComplete != (Audio_CallbackTypeDef)NULL)
- {
- hAudioIn.CbTransferComplete();
- }
-}
-
-/**
- * @brief Half regular conversion complete callback.
- * @param hdfsdm_filter : DFSDM filter handle.
- * @retval None
- */
-void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
-{
- uint32_t index;
- uint32_t recbufsize = (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR);
-
-
- for(index = 0; index < (recbufsize/2); index++)
- {
- hAudioIn.pRecBuf[index] = (uint16_t)(SaturaLH((hAudioIn.LeftRecBuff[index] >> 8), -32760, 32760));
- }
-
- /* Invoke the registered 'HalfTransfer' callback function (if any) */
- if (hAudioIn.CbHalfTransfer != (Audio_CallbackTypeDef)NULL)
- {
- hAudioIn.CbHalfTransfer();
- }
-}
-
-/**
- * @brief Error callback.
- * @param hdfsdm_filter : DFSDM filter handle.
- * @retval None
- */
-void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
-{
- /* Invoke the registered 'ErrorCallback' callback function (if any) */
- if (hAudioIn.CbError != (Audio_CallbackTypeDef)NULL)
- {
- hAudioIn.CbError();
- }
-}
-
-/**
- * @brief Stops audio recording.
- * @retval BSP AUDIO status
- */
-uint8_t BSP_AUDIO_IN_Stop(void)
-{
- /* Call the Media layer stop function for left channel */
- if(HAL_DFSDM_FilterRegularStop_DMA(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK )
- {
- return AUDIO_ERROR;
- }
-
- /* Free hAudioIn.LeftRecBuff buffer */
-#if defined(BSP_AUDIO_USE_RTOS)
- k_free((void *)hAudioIn.LeftRecBuff);
-#else
- free((void *)hAudioIn.LeftRecBuff);
-#endif
-
- return AUDIO_OK;
-}
-
-/**
- * @brief Pauses the audio file stream.
- * @retval BSP AUDIO status
- */
-uint8_t BSP_AUDIO_IN_Pause(void)
-{
- /* Call the Media layer stop function */
- if(HAL_DFSDM_FilterRegularStop_DMA(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @brief Resumes the audio file stream.
- * @retval BSP AUDIO status
- */
-uint8_t BSP_AUDIO_IN_Resume(void)
-{
- /* Call the Media layer start function for left channel */
- if(HAL_DFSDM_FilterRegularStart_DMA(&BSP_AUDIO_hDfsdmLeftFilter,
- (int32_t*)hAudioIn.LeftRecBuff,
- (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR)) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @brief register user callback functions
- * @param ErrorCallback: pointer to the error callback function
- * @param HalfTransferCallback: pointer to the half transfer callback function
- * @param TransferCompleteCallback: pointer to the transfer complete callback function
- * @retval None
- */
-void BSP_AUDIO_IN_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
- Audio_CallbackTypeDef HalfTransferCallback,
- Audio_CallbackTypeDef TransferCompleteCallback)
-{
- hAudioIn.CbError = ErrorCallback;
- hAudioIn.CbHalfTransfer = HalfTransferCallback;
- hAudioIn.CbTransferComplete = TransferCompleteCallback;
-}
-/**
- * @}
- */
-
-/* private functions --------------------------------------------------------*/
-/** @addtogroup STM32L476G_DISCOVERY_AUDIO_Private_Functions
- * @{
- */
-/**
- * @brief Initializes the Audio Codec audio interface (SAI).
- * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
- * @note The default SlotActive configuration is set to CODEC_AUDIOFRAME_SLOT_0123
- * and user can update this configuration using
- * @retval BSP AUDIO status
- */
-static uint8_t AUDIO_SAIx_Init(uint32_t AudioFreq)
-{
- /* Disable SAI peripheral to allow access to SAI internal registers */
- __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
-
- /* Initialize the BSP_AUDIO_hSai Instance parameter */
- BSP_AUDIO_hSai.Instance = AUDIO_SAIx;
-
- /* Configure SAI_Block_x
- LSBFirst: Disabled
- DataSize: 16 */
- BSP_AUDIO_hSai.Init.AudioMode = SAI_MODEMASTER_TX;
- BSP_AUDIO_hSai.Init.Synchro = SAI_ASYNCHRONOUS;
- BSP_AUDIO_hSai.Init.SynchroExt = SAI_SYNCEXT_DISABLE;
- BSP_AUDIO_hSai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLE;
- BSP_AUDIO_hSai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLE;
- BSP_AUDIO_hSai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
- BSP_AUDIO_hSai.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_MCKDIV;
- BSP_AUDIO_hSai.Init.Mckdiv = SAIClockDivider(AudioFreq);
- BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_STEREOMODE;
- BSP_AUDIO_hSai.Init.CompandingMode = SAI_NOCOMPANDING;
- BSP_AUDIO_hSai.Init.TriState = SAI_OUTPUT_NOTRELEASED;
- BSP_AUDIO_hSai.Init.Protocol = SAI_FREE_PROTOCOL;
- BSP_AUDIO_hSai.Init.DataSize = SAI_DATASIZE_16;
- BSP_AUDIO_hSai.Init.FirstBit = SAI_FIRSTBIT_MSB;
- BSP_AUDIO_hSai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
-
- /* Configure SAI_Block_x Frame
- Frame Length: 32
- Frame active Length: 16
- FS Definition: Start frame + Channel Side identification
- FS Polarity: FS active Low
- FS Offset: FS asserted one bit before the first bit of slot 0 */
- BSP_AUDIO_hSai.FrameInit.FrameLength = 32;
- BSP_AUDIO_hSai.FrameInit.ActiveFrameLength = 16;
- BSP_AUDIO_hSai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
- BSP_AUDIO_hSai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
- BSP_AUDIO_hSai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
-
- /* Configure SAI Block_x Slot
- Slot First Bit Offset: 0
- Slot Size : 16
- Slot Number: 2
- Slot Active: Slots 0 and 1 actives */
- BSP_AUDIO_hSai.SlotInit.FirstBitOffset = 0;
- BSP_AUDIO_hSai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
- BSP_AUDIO_hSai.SlotInit.SlotNumber = 2;
- BSP_AUDIO_hSai.SlotInit.SlotActive = SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1;
-
- /* Initializes the SAI peripheral*/
- if (HAL_SAI_Init(&BSP_AUDIO_hSai) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Enable SAI peripheral to generate MCLK */
- __HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
-
- return AUDIO_OK;
-
-}
-
-/**
- * @brief De-initializes the Audio Codec audio interface (SAI).
- * @retval BSP AUDIO status
- */
-static uint8_t AUDIO_SAIx_DeInit(void)
-{
- /* Disable the SAI audio block */
- __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
-
- /* De-initializes the SAI peripheral */
- if (HAL_SAI_DeInit(&BSP_AUDIO_hSai) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Disable SAIx PLL */
- if (AUDIO_SAIx_PLL_DISABLE() != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @brief SAI MSP Init
- * @param hsai : pointer to a SAI_HandleTypeDef structure
- * @retval None
- */
-void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable SAI clock */
- AUDIO_SAIx_CLK_ENABLE();
-
- /* Enable GPIO clock */
- AUDIO_SAIx_MCK_SCK_SD_FS_ENABLE();
-
- /* CODEC_SAI pins configuration: FS, SCK, MCK and SD pins ------------------*/
- GPIO_InitStruct.Pin = AUDIO_SAIx_FS_PIN | AUDIO_SAIx_SCK_PIN | AUDIO_SAIx_SD_PIN | AUDIO_SAIx_MCK_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.Alternate = AUDIO_SAIx_MCK_SCK_SD_FS_AF;
- HAL_GPIO_Init(AUDIO_SAIx_MCK_SCK_SD_FS_GPIO_PORT, &GPIO_InitStruct);
-
- /* Enable the DMA clock */
- AUDIO_SAIx_DMAx_CLK_ENABLE();
-
- if(hsai->Instance == AUDIO_SAIx)
- {
- /* Configure the hDmaSai handle parameters */
- hDmaSai.Init.Request = DMA_REQUEST_1;
- hDmaSai.Init.Direction = DMA_MEMORY_TO_PERIPH;
- hDmaSai.Init.PeriphInc = DMA_PINC_DISABLE;
- hDmaSai.Init.MemInc = DMA_MINC_ENABLE;
- hDmaSai.Init.PeriphDataAlignment = AUDIO_SAIx_DMAx_PERIPH_DATA_SIZE;
- hDmaSai.Init.MemDataAlignment = AUDIO_SAIx_DMAx_MEM_DATA_SIZE;
- hDmaSai.Init.Mode = DMA_NORMAL;
- hDmaSai.Init.Priority = DMA_PRIORITY_HIGH;
-
- hDmaSai.Instance = AUDIO_SAIx_DMAx_CHANNEL;
-
- /* Associate the DMA handle */
- __HAL_LINKDMA(hsai, hdmatx, hDmaSai);
-
- /* Deinitialize the Stream for new transfer */
- HAL_DMA_DeInit(&hDmaSai);
-
- /* Configure the DMA Stream */
- HAL_DMA_Init(&hDmaSai);
- }
-
- /* SAI DMA IRQ Channel configuration */
- HAL_NVIC_SetPriority(AUDIO_SAIx_DMAx_IRQ, AUDIO_OUT_IRQ_PREPRIO, 0);
- HAL_NVIC_EnableIRQ(AUDIO_SAIx_DMAx_IRQ);
-}
-
-/**
- * @brief SAI MSP De-init
- * @param hsai : pointer to a SAI_HandleTypeDef structure
- * @retval None
- */
-void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
-{
- /* Disable SAI DMA Channel IRQ */
- HAL_NVIC_DisableIRQ(AUDIO_SAIx_DMAx_IRQ);
-
- /* Reset the DMA Stream configuration*/
- HAL_DMA_DeInit(&hDmaSai);
-
- /* Disable the DMA clock */
- AUDIO_SAIx_DMAx_CLK_DISABLE();
-
- /* De-initialize FS, SCK, MCK and SD pins*/
- HAL_GPIO_DeInit(AUDIO_SAIx_MCK_SCK_SD_FS_GPIO_PORT,
- AUDIO_SAIx_FS_PIN | AUDIO_SAIx_SCK_PIN | AUDIO_SAIx_SD_PIN | AUDIO_SAIx_MCK_PIN);
-
- /* Disable GPIO clock */
- AUDIO_SAIx_MCK_SCK_SD_FS_DISABLE();
-
- /* Disable SAI clock */
- AUDIO_SAIx_CLK_DISABLE();
-}
-
-/**
- * @brief Resets the audio codec. It restores the default configuration of the
- * codec (this function shall be called before initializing the codec).
- * @retval None
- */
-
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_AUDIO_Private_Functions
- * @{
- */
-
-/**
- * @brief Initializes the Digital Filter for Sigma-Delta Modulators interface (DFSDM).
- * @param AudioFreq: Audio frequency to be used to set correctly the DFSDM peripheral.
- * @retval BSP AUDIO status
- */
-static uint8_t AUDIO_DFSDMx_Init(uint32_t AudioFreq)
-{
- /*####CHANNEL 2####*/
- hAudioIn.hDfsdmLeftChannel.Init.OutputClock.Activation = ENABLE;
- hAudioIn.hDfsdmLeftChannel.Init.OutputClock.Selection = DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO;
- /* Set the DFSDM clock OUT audio frequency configuration */
- hAudioIn.hDfsdmLeftChannel.Init.OutputClock.Divider = DFSDMClockDivider(AudioFreq);
- hAudioIn.hDfsdmLeftChannel.Init.Input.Multiplexer = DFSDM_CHANNEL_EXTERNAL_INPUTS;
- hAudioIn.hDfsdmLeftChannel.Init.Input.DataPacking = DFSDM_CHANNEL_STANDARD_MODE;
- hAudioIn.hDfsdmLeftChannel.Init.Input.Pins = DFSDM_CHANNEL_SAME_CHANNEL_PINS;
- /* Request to sample stable data for LEFT micro on Rising edge */
- hAudioIn.hDfsdmLeftChannel.Init.SerialInterface.Type = DFSDM_CHANNEL_SPI_RISING;
- hAudioIn.hDfsdmLeftChannel.Init.SerialInterface.SpiClock = DFSDM_CHANNEL_SPI_CLOCK_INTERNAL;
- hAudioIn.hDfsdmLeftChannel.Init.Awd.FilterOrder = DFSDM_CHANNEL_SINC1_ORDER;
- hAudioIn.hDfsdmLeftChannel.Init.Awd.Oversampling = 10;
- hAudioIn.hDfsdmLeftChannel.Init.Offset = 0;
- hAudioIn.hDfsdmLeftChannel.Init.RightBitShift = DFSDMRightBitShift(AudioFreq);
-
- hAudioIn.hDfsdmLeftChannel.Instance = DFSDM_Channel2;
-
- /* Init the DFSDM Channel */
- if (HAL_DFSDM_ChannelInit(&hAudioIn.hDfsdmLeftChannel) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- /*####FILTER 0####*/
- BSP_AUDIO_hDfsdmLeftFilter.Init.RegularParam.Trigger = DFSDM_FILTER_SW_TRIGGER;
- BSP_AUDIO_hDfsdmLeftFilter.Init.RegularParam.FastMode = ENABLE;
- BSP_AUDIO_hDfsdmLeftFilter.Init.RegularParam.DmaMode = ENABLE;
- BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.Trigger = DFSDM_FILTER_SW_TRIGGER;
- BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.ScanMode = DISABLE;
- BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.DmaMode = DISABLE;
- BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.ExtTrigger = DFSDM_FILTER_EXT_TRIG_TIM8_TRGO;
- BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.ExtTriggerEdge = DFSDM_FILTER_EXT_TRIG_BOTH_EDGES;
- BSP_AUDIO_hDfsdmLeftFilter.Init.FilterParam.SincOrder = DFSDMFilterOrder(AudioFreq);
- /* Set the DFSDM Filters Oversampling to have correct sample rate */
- BSP_AUDIO_hDfsdmLeftFilter.Init.FilterParam.Oversampling = DFSDMOverSampling(AudioFreq);
- BSP_AUDIO_hDfsdmLeftFilter.Init.FilterParam.IntOversampling = 1;
-
- BSP_AUDIO_hDfsdmLeftFilter.Instance = AUDIO_DFSDMx_LEFT_FILTER;
-
- /* Init the DFSDM Filter */
- if (HAL_DFSDM_FilterInit(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Configure regular channel */
- if (HAL_DFSDM_FilterConfigRegChannel(&BSP_AUDIO_hDfsdmLeftFilter,
- DFSDM_CHANNEL_2,
- DFSDM_CONTINUOUS_CONV_ON) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @brief De-initializes the Digital Filter for Sigma-Delta Modulators interface (DFSDM).
- * @retval BSP AUDIO status
- */
-static uint8_t AUDIO_DFSDMx_DeInit(void)
-{
- /* De-initializes the DFSDM filters to allow access to DFSDM internal registers */
- if (HAL_DFSDM_FilterDeInit(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* De-initializes the DFSDM channels to allow access to DFSDM internal registers */
- if (HAL_DFSDM_ChannelDeInit(&hAudioIn.hDfsdmLeftChannel) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* Disable DFSDM clock */
- AUDIO_DFSDMx_CLK_DISABLE();
-
- /* Disable SAIx PLL */
- if (AUDIO_SAIx_PLL_DISABLE() != AUDIO_OK)
- {
- return AUDIO_ERROR;
- }
-
- /* DFSDM reset */
- __HAL_RCC_DFSDM_FORCE_RESET();
- __HAL_RCC_DFSDM_RELEASE_RESET();
-
- return AUDIO_OK;
-}
-
-/**
- * @brief Initializes the DFSDM channel MSP.
- * @param hdfsdm_channel : DFSDM channel handle.
- * @retval None
- */
-void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable DFSDM clock */
- AUDIO_DFSDMx_CLK_ENABLE();
-
- /* Enable GPIO clock */
- AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_ENABLE();
-
- /* DFSDM pins configuration: DFSDM_CKOUT, DMIC_DATIN pins ------------------*/
- GPIO_InitStruct.Pin = AUDIO_DFSDMx_CKOUT_PIN | AUDIO_DFSDMx_DMIC_DATIN_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.Alternate = AUDIO_DFSDMx_CKOUT_DMIC_DATIN_AF;
- HAL_GPIO_Init(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, &GPIO_InitStruct);
-}
-
-/**
- * @brief De-initializes the DFSDM channel MSP.
- * @param hdfsdm_channel : DFSDM channel handle.
- * @retval None
- */
-void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
-
- /* Enable GPIO clock */
- AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_ENABLE();
-
- /* DFSDM pins configuration: DFSDM_CKOUT */
- GPIO_InitStruct.Pin = AUDIO_DFSDMx_CKOUT_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, &GPIO_InitStruct);
- HAL_GPIO_WritePin(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, AUDIO_DFSDMx_CKOUT_PIN, GPIO_PIN_RESET);
-
-
- /* De-initialize DMIC_DATIN pin */
- HAL_GPIO_DeInit(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, AUDIO_DFSDMx_DMIC_DATIN_PIN);
-}
-
-/**
- * @brief Initializes the DFSDM filter MSP.
- * @param hdfsdm_filter : DFSDM filter handle.
- * @retval None
- */
-void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
-{
- /* Enable DFSDM clock */
- AUDIO_DFSDMx_CLK_ENABLE();
-
- /* Enable the DMA clock */
- AUDIO_DFSDMx_DMAx_CLK_ENABLE();
-
- /* Configure the hAudioIn.hDmaDfsdmLeft handle parameters */
- hAudioIn.hDmaDfsdmLeft.Init.Request = DMA_REQUEST_0;
- hAudioIn.hDmaDfsdmLeft.Init.Direction = DMA_PERIPH_TO_MEMORY;
- hAudioIn.hDmaDfsdmLeft.Init.PeriphInc = DMA_PINC_DISABLE;
- hAudioIn.hDmaDfsdmLeft.Init.MemInc = DMA_MINC_ENABLE;
- hAudioIn.hDmaDfsdmLeft.Init.PeriphDataAlignment = AUDIO_DFSDMx_DMAx_PERIPH_DATA_SIZE;
- hAudioIn.hDmaDfsdmLeft.Init.MemDataAlignment = AUDIO_DFSDMx_DMAx_MEM_DATA_SIZE;
- hAudioIn.hDmaDfsdmLeft.Init.Mode = DMA_CIRCULAR;
- hAudioIn.hDmaDfsdmLeft.Init.Priority = DMA_PRIORITY_HIGH;
-
- hAudioIn.hDmaDfsdmLeft.Instance = AUDIO_DFSDMx_DMAx_LEFT_CHANNEL;
-
- /* Associate the DMA handle */
- __HAL_LINKDMA(hdfsdm_filter, hdmaReg, hAudioIn.hDmaDfsdmLeft);
-
- /* Reset DMA handle state */
- __HAL_DMA_RESET_HANDLE_STATE(&hAudioIn.hDmaDfsdmLeft);
-
- /* Configure the DMA Channel */
- HAL_DMA_Init(&hAudioIn.hDmaDfsdmLeft);
-
- /* DMA IRQ Channel configuration */
- HAL_NVIC_SetPriority(AUDIO_DFSDMx_DMAx_LEFT_IRQ, AUDIO_OUT_IRQ_PREPRIO, 0);
- HAL_NVIC_EnableIRQ(AUDIO_DFSDMx_DMAx_LEFT_IRQ);
- }
-
- /**
- * @brief De-initializes the DFSDM filter MSP.
- * @param hdfsdm_filter : DFSDM filter handle.
- * @retval None
- */
-void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
-{
- /* Disable DMA Channel IRQ */
- HAL_NVIC_DisableIRQ(AUDIO_DFSDMx_DMAx_LEFT_IRQ);
-
- /* De-initialize the DMA Channel */
- HAL_DMA_DeInit(&hAudioIn.hDmaDfsdmLeft);
-
- /* Disable the DMA clock */
- AUDIO_DFSDMx_DMAx_CLK_DISABLE();
-}
-
-/**
- * @brief Configures the SAI PLL clock according to the required audio frequency.
- * @param Frequency: Audio frequency.
- * @retval BSP AUDIO status
- * @note The SAI PLL input clock must be configured in the user application.
- * The SAI PLL configuration done within this function assumes that
- * the SAI PLL input clock runs at 8 MHz.
- */
-static uint8_t AUDIO_SAIPLLConfig(uint32_t Frequency)
-{
- RCC_PeriphCLKInitTypeDef RCC_ExCLKInitStruct;
-
- /* Retreive actual RCC configuration */
- HAL_RCCEx_GetPeriphCLKConfig(&RCC_ExCLKInitStruct);
-
- if ( (Frequency == AUDIO_FREQUENCY_11K)
- || (Frequency == AUDIO_FREQUENCY_22K)
- || (Frequency == AUDIO_FREQUENCY_44K) )
- {
- /* Configure PLLSAI prescalers */
- /* SAI clock config
- PLLSAI1_VCO= 8 Mhz * PLLSAI1N = 8 * 24 = VCO_192M
- SAI_CK_x = PLLSAI1_VCO/PLLSAI1P = 192/17 = 11.294 Mhz */
- RCC_ExCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI1;
- RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1N = 24;
- RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1P = 17;
- RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_SAI1CLK;
- RCC_ExCLKInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLLSAI1;
- }
- else /* AUDIO_FREQUENCY_8K, AUDIO_FREQUENCY_16K, AUDIO_FREQUENCY_48K, AUDIO_FREQUENCY_96K */
- {
- /* SAI clock config
- PLLSAI1_VCO= 8 Mhz * PLLSAI1N = 8 * 43 = VCO_344M
- SAI_CK_x = PLLSAI1_VCO/PLLSAI1P = 344/7 = 49.142 Mhz */
- RCC_ExCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI1;
- RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1N = 43;
- RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1P = 7;
- RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_SAI1CLK;
- RCC_ExCLKInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLLSAI1;
- }
-
- if (HAL_RCCEx_PeriphCLKConfig(&RCC_ExCLKInitStruct) != HAL_OK)
- {
- return AUDIO_ERROR;
- }
-
- return AUDIO_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery_audio.h
--- a/stm32l476g_discovery_audio.h Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,280 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l476g_discovery_audio.h
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief This file contains the common defines and functions prototypes for
- * the stm32l476g_discovery_audio.c driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L476G_DISCOVERY_AUDIO_H
-#define __STM32L476G_DISCOVERY_AUDIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#if defined(BSP_AUDIO_USE_RTOS)
-#include "k_mem.h"
-#else
-#include <stdlib.h>
-#endif
-/* Include audio component Driver */
-
-#include "stm32l476g_discovery.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_AUDIO
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Exported_Types Exported Types
- * @{
- */
-typedef void (*Audio_CallbackTypeDef)(void);
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Exported_Constants Exported Constants
- * @{
- */
-/** @defgroup BSP_Audio_Out_Option BSP Audio Out Option
- * @{
- */
-#define BSP_AUDIO_OUT_CIRCULARMODE ((uint32_t)0x00000001) /* BUFFER CIRCULAR MODE */
-#define BSP_AUDIO_OUT_NORMALMODE ((uint32_t)0x00000002) /* BUFFER NORMAL MODE */
-#define BSP_AUDIO_OUT_STEREOMODE ((uint32_t)0x00000004) /* STEREO MODE */
-#define BSP_AUDIO_OUT_MONOMODE ((uint32_t)0x00000008) /* MONO MODE */
-/**
- * @}
- */
-
-/** @defgroup BSP_Audio_Sample_Rate BSP Audio Sample Rate
- * @{
- */
-#define BSP_AUDIO_FREQUENCY_96K SAI_AUDIO_FREQUENCY_96K
-#define BSP_AUDIO_FREQUENCY_48K SAI_AUDIO_FREQUENCY_48K
-#define BSP_AUDIO_FREQUENCY_44K SAI_AUDIO_FREQUENCY_44K
-#define BSP_AUDIO_FREQUENCY_32K SAI_AUDIO_FREQUENCY_32K
-#define BSP_AUDIO_FREQUENCY_22K SAI_AUDIO_FREQUENCY_22K
-#define BSP_AUDIO_FREQUENCY_16K SAI_AUDIO_FREQUENCY_16K
-#define BSP_AUDIO_FREQUENCY_11K SAI_AUDIO_FREQUENCY_11K
-#define BSP_AUDIO_FREQUENCY_8K SAI_AUDIO_FREQUENCY_8K
-/**
- * @}
- */
-
-/* AUDIO FREQUENCY */
-#define AUDIO_FREQUENCY_192K ((uint32_t)192000)
-#define AUDIO_FREQUENCY_96K ((uint32_t)96000)
-#define AUDIO_FREQUENCY_48K ((uint32_t)48000)
-#define AUDIO_FREQUENCY_44K ((uint32_t)44100)
-#define AUDIO_FREQUENCY_32K ((uint32_t)32000)
-#define AUDIO_FREQUENCY_22K ((uint32_t)22050)
-#define AUDIO_FREQUENCY_16K ((uint32_t)16000)
-#define AUDIO_FREQUENCY_11K ((uint32_t)11025)
-#define AUDIO_FREQUENCY_8K ((uint32_t)8000)
-
-/*------------------------------------------------------------------------------
- USER SAI defines parameters
- -----------------------------------------------------------------------------*/
-/* SAI peripheral configuration defines */
-#define AUDIO_SAIx SAI1_Block_A
-#define AUDIO_SAIx_CLK_ENABLE() __HAL_RCC_SAI1_CLK_ENABLE()
-#define AUDIO_SAIx_CLK_DISABLE() __HAL_RCC_SAI1_CLK_DISABLE()
-#define AUDIO_SAIx_MCK_SCK_SD_FS_AF GPIO_AF13_SAI1
-
-#define AUDIO_SAIx_MCK_SCK_SD_FS_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define AUDIO_SAIx_MCK_SCK_SD_FS_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-#define AUDIO_SAIx_FS_PIN GPIO_PIN_4
-#define AUDIO_SAIx_SCK_PIN GPIO_PIN_5
-#define AUDIO_SAIx_SD_PIN GPIO_PIN_6
-#define AUDIO_SAIx_MCK_PIN GPIO_PIN_2
-#define AUDIO_SAIx_MCK_SCK_SD_FS_GPIO_PORT GPIOE
-
-/* SAI DMA Channel definitions */
-#define AUDIO_SAIx_DMAx_CLK_ENABLE() __HAL_RCC_DMA2_CLK_ENABLE()
-#define AUDIO_SAIx_DMAx_CLK_DISABLE() __HAL_RCC_DMA2_CLK_DISABLE()
-#define AUDIO_SAIx_DMAx_CHANNEL DMA2_Channel1
-#define AUDIO_SAIx_DMAx_IRQ DMA2_Channel1_IRQn
-#define AUDIO_SAIx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD
-#define AUDIO_SAIx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD
-#define DMA_MAX_SZE (uint32_t)0xFFFF
-
-#define AUDIO_SAIx_DMAx_IRQHandler DMA2_Channel1_IRQHandler
-
-/* Select the interrupt preemption priority for the DMA interrupt */
-#define AUDIO_OUT_IRQ_PREPRIO 5 /* Select the preemption priority level(0 is the highest) */
-
-/* Disable SAIx PLL */
-#define AUDIO_SAIx_PLL_DISABLE() HAL_RCCEx_DisablePLLSAI1()
-
-/*------------------------------------------------------------------------------
- AUDIO IN CONFIGURATION
-------------------------------------------------------------------------------*/
-/* DFSDM Configuration defines */
-#define AUDIO_DFSDMx_LEFT_CHANNEL DFSDM_Channel2
-#define AUDIO_DFSDMx_LEFT_FILTER DFSDM_Filter0
-#define AUDIO_DFSDMx_CLK_ENABLE() __HAL_RCC_DFSDM_CLK_ENABLE()
-#define AUDIO_DFSDMx_CLK_DISABLE() __HAL_RCC_DFSDM_CLK_DISABLE()
-#define AUDIO_DFSDMx_CKOUT_PIN GPIO_PIN_9
-#define AUDIO_DFSDMx_DMIC_DATIN_PIN GPIO_PIN_7
-#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT GPIOE
-#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
-#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
-#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_AF GPIO_AF6_DFSDM
-
-/* DFSDM DMA Right and Left channels definitions */
-#define AUDIO_DFSDMx_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
-#define AUDIO_DFSDMx_DMAx_CLK_DISABLE() __HAL_RCC_DMA1_CLK_DISABLE()
-#define AUDIO_DFSDMx_DMAx_LEFT_CHANNEL DMA1_Channel4
-#define AUDIO_DFSDMx_DMAx_LEFT_IRQ DMA1_Channel4_IRQn
-#define AUDIO_DFSDMx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_WORD
-#define AUDIO_DFSDMx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_WORD
-
-#define AUDIO_DFSDM_DMAx_LEFT_IRQHandler DMA1_Channel4_IRQHandler
-
-/* Select the interrupt preemption priority and subpriority for the IT/DMA interrupt */
-#define AUDIO_IN_IRQ_PREPRIO 6 /* Select the preemption priority level(0 is the highest) */
-
-/*------------------------------------------------------------------------------
- CONFIGURATION: Audio Driver Configuration parameters
-------------------------------------------------------------------------------*/
-
-#define AUDIODATA_SIZE 2 /* 16-bits audio data size */
-
-/* Audio status definition */
-#define AUDIO_OK 0
-#define AUDIO_ERROR 1
-#define AUDIO_TIMEOUT 2
-
-/* AudioFreq * DataSize (2 bytes) * NumChannels (Stereo: 2) */
-#define DEFAULT_AUDIO_IN_FREQ BSP_AUDIO_FREQUENCY_16K
-#define DEFAULT_AUDIO_IN_BIT_RESOLUTION 16
-#define DEFAULT_AUDIO_IN_CHANNEL_NBR 1 /* Mono = 1, Stereo = 2 */
-#define DEFAULT_AUDIO_IN_VOLUME 64
-
-/*------------------------------------------------------------------------------
- OPTIONAL Configuration defines parameters
-------------------------------------------------------------------------------*/
-
-/* Delay for the Codec to be correctly reset */
-#define CODEC_RESET_DELAY 5
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Exported_Variables Exported Variables
- * @{
- */
-extern SAI_HandleTypeDef BSP_AUDIO_hSai;
-extern DFSDM_Filter_HandleTypeDef BSP_AUDIO_hDfsdmLeftFilter;
-
- /**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Exported_Macros Exported Macros
- * @{
- */
-#define DMA_MAX(_X_) (((_X_) <= DMA_MAX_SZE)? (_X_):DMA_MAX_SZE)
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_AUDIO_Exported_Functions Exported Functions
- * @{
- */
-uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
-uint8_t BSP_AUDIO_OUT_DeInit(void);
-uint8_t BSP_AUDIO_OUT_Play(uint16_t* pData, uint32_t Size);
-uint8_t BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size);
-uint8_t BSP_AUDIO_OUT_Pause(void);
-uint8_t BSP_AUDIO_OUT_Resume(void);
-uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option);
-uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume);
-uint8_t BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq);
-void BSP_AUDIO_OUT_ChangeAudioConfig(uint32_t AudioOutOption);
-uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd);
-uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output);
-void BSP_AUDIO_OUT_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
- Audio_CallbackTypeDef HalfTransferCallback,
- Audio_CallbackTypeDef TransferCompleteCallback);
-
-uint8_t BSP_AUDIO_IN_Init(uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr);
-uint8_t BSP_AUDIO_IN_DeInit(void);
-uint8_t BSP_AUDIO_IN_Record(uint16_t *pData, uint32_t Size);
-uint8_t BSP_AUDIO_IN_SetFrequency(uint32_t AudioFreq);
-uint8_t BSP_AUDIO_IN_Stop(void);
-uint8_t BSP_AUDIO_IN_Pause(void);
-uint8_t BSP_AUDIO_IN_Resume(void);
-void BSP_AUDIO_IN_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
- Audio_CallbackTypeDef HalfTransferCallback,
- Audio_CallbackTypeDef TransferCompleteCallback);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L476G_DISCOVERY_AUDIO_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery_glass_lcd.c
--- a/stm32l476g_discovery_glass_lcd.c Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,988 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l476g_discovery_glass_lcd.c
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief This file provides a set of functions needed to manage the
- * LCD Glass driver for the STM32L476G-Discovery board.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l476g_discovery_glass_lcd.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY
- * @{
- */
-
-/** @defgroup STM32L476G_DISCOVERY_GLASS_LCD STM32L476G-DISCOVERY GLASS LCD
- * @brief This file includes the LCD Glass driver for LCD Module of
- * STM32L476G-DISCOVERY board.
- * @{
- */
-
-/* Private constants ---------------------------------------------------------*/
-
-/** @defgroup STM32L476G_DISCOVERY_GLASS_LCD_Private_Constants Private Constants
- * @{
- */
-#define ASCII_CHAR_0 0x30 /* 0 */
-#define ASCII_CHAR_AT_SYMBOL 0x40 /* @ */
-#define ASCII_CHAR_LEFT_OPEN_BRACKET 0x5B /* [ */
-#define ASCII_CHAR_APOSTROPHE 0x60 /* ` */
-#define ASCII_CHAR_LEFT_OPEN_BRACE 0x7B /* ( */
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-
-/** @defgroup STM32L476G_DISCOVERY_GLASS_LCD_Private_Variables Private Variables
- * @{
- */
-
-/* this variable can be used for accelerate the scrolling exit when push user button */
-__IO uint8_t bLCDGlass_KeyPressed = 0;
-
-/**
- @verbatim
-================================================================================
- GLASS LCD MAPPING
-================================================================================
-LCD allows to display informations on six 14-segment digits and 4 bars:
-
- 1 2 3 4 5 6
------ ----- ----- ----- ----- -----
-|\|/| o |\|/| o |\|/| o |\|/| o |\|/| |\|/| BAR3
--- -- -- -- -- -- -- -- -- -- -- -- BAR2
-|/|\| o |/|\| o |/|\| o |/|\| o |/|\| |/|\| BAR1
------ * ----- * ----- * ----- * ----- ----- BAR0
-
-LCD segment mapping:
---------------------
- -----A----- _
- |\ | /| COL |_|
- F H J K B
- | \ | / | _
- --G-- --M-- COL |_|
- | / | \ |
- E Q P N C
- |/ | \| _
- -----D----- DP |_|
-
- An LCD character coding is based on the following matrix:
-COM 0 1 2 3
-SEG(n) { E , D , P , N }
-SEG(n+1) { M , C , COL , DP }
-SEG(23-n-1) { B , A , K , J }
-SEG(23-n) { G , F , Q , H }
-with n positive odd number.
-
- The character 'A' for example is:
- -------------------------------
-LSB { 1 , 0 , 0 , 0 }
- { 1 , 1 , 0 , 0 }
- { 1 , 1 , 0 , 0 }
-MSB { 1 , 1 , 0 , 0 }
- -------------------
- 'A' = F E 0 0 hexa
-
- @endverbatim
-*/
-
-LCD_HandleTypeDef LCDHandle;
-
-/* Constant table for cap characters 'A' --> 'Z' */
-const uint16_t CapLetterMap[26]=
- {
- /* A B C D E F G H I */
- 0xFE00, 0x6714, 0x1D00, 0x4714, 0x9D00, 0x9C00, 0x3F00, 0xFA00, 0x0014,
- /* J K L M N O P Q R */
- 0x5300, 0x9841, 0x1900, 0x5A48, 0x5A09, 0x5F00, 0xFC00, 0x5F01, 0xFC01,
- /* S T U V W X Y Z */
- 0xAF00, 0x0414, 0x5b00, 0x18C0, 0x5A81, 0x00C9, 0x0058, 0x05C0
- };
-
-/* Constant table for number '0' --> '9' */
-const uint16_t NumberMap[10]=
- {
- /* 0 1 2 3 4 5 6 7 8 9 */
- 0x5F00,0x4200,0xF500,0x6700,0xEa00,0xAF00,0xBF00,0x04600,0xFF00,0xEF00
- };
-
-uint32_t Digit[4]; /* Digit frame buffer */
-
-/* LCD BAR status: To save the bar setting after writing in LCD RAM memory */
-uint8_t LCDBar = BATTERYLEVEL_FULL;
-
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_LCD_Private_Functions Private Functions
- * @{
- */
-static void Convert(uint8_t* Char, Point_Typedef Point, DoublePoint_Typedef Colon);
-static void WriteChar(uint8_t* ch, Point_Typedef Point, DoublePoint_Typedef Colon, DigitPosition_Typedef Position);
-static void LCD_MspInit(LCD_HandleTypeDef *hlcd);
-static void LCD_MspDeInit(LCD_HandleTypeDef *hlcd);
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_LCD_Exported_Functions
- * @{
- */
-
-/**
- * @brief Initialize the LCD GLASS relative GPIO port IOs and LCD peripheral.
- * @retval None
- */
-void BSP_LCD_GLASS_Init(void)
-{
- LCDHandle.Instance = LCD;
- LCDHandle.Init.Prescaler = LCD_PRESCALER_1;
- LCDHandle.Init.Divider = LCD_DIVIDER_31;
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
- LCDHandle.Init.Duty = LCD_DUTY_1_4;
-#elif defined (USE_STM32L476G_DISCO_REVA)
- LCDHandle.Init.Duty = LCD_DUTY_1_8;
-#endif
- LCDHandle.Init.Bias = LCD_BIAS_1_3;
- LCDHandle.Init.VoltageSource = LCD_VOLTAGESOURCE_INTERNAL;
- LCDHandle.Init.Contrast = LCD_CONTRASTLEVEL_5;
- LCDHandle.Init.DeadTime = LCD_DEADTIME_0;
- LCDHandle.Init.PulseOnDuration = LCD_PULSEONDURATION_4;
- LCDHandle.Init.HighDrive = LCD_HIGHDRIVE_DISABLE;
- LCDHandle.Init.BlinkMode = LCD_BLINKMODE_OFF;
- LCDHandle.Init.BlinkFrequency = LCD_BLINKFREQUENCY_DIV32;
- LCDHandle.Init.MuxSegment = LCD_MUXSEGMENT_DISABLE;
-
- /* Initialize the LCD */
- LCD_MspInit(&LCDHandle);
- HAL_LCD_Init(&LCDHandle);
-
- BSP_LCD_GLASS_Clear();
-}
-
-/**
- * @brief DeInitialize the LCD GLASS relative GPIO port IOs and LCD peripheral.
- * @retval None
- */
-void BSP_LCD_GLASS_DeInit(void)
-{
- /* De-Initialize the LCD */
- LCD_MspDeInit(&LCDHandle);
- HAL_LCD_DeInit(&LCDHandle);
-}
-
-
-/**
- * @brief Configure the LCD Blink mode and Blink frequency.
- * @param BlinkMode: specifies the LCD blink mode.
- * This parameter can be one of the following values:
- * @arg LCD_BLINKMODE_OFF: Blink disabled
- * @arg LCD_BLINKMODE_SEG0_COM0: Blink enabled on SEG[0], COM[0] (1 pixel)
- * @arg LCD_BLINKMODE_SEG0_ALLCOM: Blink enabled on SEG[0], all COM (up to 8
- * pixels according to the programmed duty)
- * @arg LCD_BLINKMODE_ALLSEG_ALLCOM: Blink enabled on all SEG and all COM
- * (all pixels)
- * @param BlinkFrequency: specifies the LCD blink frequency.
- * @arg LCD_BLINKFREQUENCY_DIV8: The Blink frequency = fLcd/8
- * @arg LCD_BLINKFREQUENCY_DIV16: The Blink frequency = fLcd/16
- * @arg LCD_BLINKFREQUENCY_DIV32: The Blink frequency = fLcd/32
- * @arg LCD_BLINKFREQUENCY_DIV64: The Blink frequency = fLcd/64
- * @arg LCD_BLINKFREQUENCY_DIV128: The Blink frequency = fLcd/128
- * @arg LCD_BLINKFREQUENCY_DIV256: The Blink frequency = fLcd/256
- * @arg LCD_BLINKFREQUENCY_DIV512: The Blink frequency = fLcd/512
- * @arg LCD_BLINKFREQUENCY_DIV1024: The Blink frequency = fLcd/1024
- * @retval None
- */
-void BSP_LCD_GLASS_BlinkConfig(uint32_t BlinkMode, uint32_t BlinkFrequency)
-{
- __HAL_LCD_BLINK_CONFIG(&LCDHandle, BlinkMode, BlinkFrequency);
-}
-
-/**
- * @brief Configure the LCD contrast.
- * @param Contrast: specifies the LCD contrast value.
- * This parameter can be one of the following values:
- * @arg LCD_CONTRASTLEVEL_0: Maximum Voltage = 2.60V
- * @arg LCD_CONTRASTLEVEL_1: Maximum Voltage = 2.73V
- * @arg LCD_CONTRASTLEVEL_2: Maximum Voltage = 2.86V
- * @arg LCD_CONTRASTLEVEL_3: Maximum Voltage = 2.99V
- * @arg LCD_CONTRASTLEVEL_4: Maximum Voltage = 3.12V
- * @arg LCD_CONTRASTLEVEL_5: Maximum Voltage = 3.25V
- * @arg LCD_CONTRASTLEVEL_6: Maximum Voltage = 3.38V
- * @arg LCD_CONTRASTLEVEL_7: Maximum Voltage = 3.51V
- * @retval None
- */
-void BSP_LCD_GLASS_Contrast(uint32_t Contrast)
-{
- __HAL_LCD_CONTRAST_CONFIG(&LCDHandle, Contrast);
-}
-
-/**
- * @brief Display one or several bar in LCD frame buffer.
- * @param BarId: specifies the LCD GLASS Bar to display
- * This parameter can be one of the following values:
- * @arg BAR0: LCD GLASS Bar 0
- * @arg BAR0: LCD GLASS Bar 1
- * @arg BAR0: LCD GLASS Bar 2
- * @arg BAR0: LCD GLASS Bar 3
- * @retval None
- */
-void BSP_LCD_GLASS_DisplayBar(uint32_t BarId)
-{
- uint32_t position = 0;
-
- /* Check which bar is selected */
- while ((BarId) >> position)
- {
- /* Check if current bar is selected */
- switch(BarId & (1 << position))
- {
- /* Bar 0 */
- case LCD_BAR_0:
- /* Set BAR0 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG), LCD_BAR0_SEG);
- break;
-
- /* Bar 1 */
- case LCD_BAR_1:
- /* Set BAR1 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG), LCD_BAR1_SEG);
- break;
-
- /* Bar 2 */
- case LCD_BAR_2:
- /* Set BAR2 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR2_SEG), LCD_BAR2_SEG);
- break;
-
- /* Bar 3 */
- case LCD_BAR_3:
- /* Set BAR3 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR3_SEG), LCD_BAR3_SEG);
- break;
-
- default:
- break;
- }
- position++;
- }
-
- /* Update the LCD display */
- HAL_LCD_UpdateDisplayRequest(&LCDHandle);
-}
-
-/**
- * @brief Clear one or several bar in LCD frame buffer.
- * @param BarId: specifies the LCD GLASS Bar to display
- * This parameter can be combination of one of the following values:
- * @arg LCD_BAR_0: LCD GLASS Bar 0
- * @arg LCD_BAR_1: LCD GLASS Bar 1
- * @arg LCD_BAR_2: LCD GLASS Bar 2
- * @arg LCD_BAR_3: LCD GLASS Bar 3
- * @retval None
- */
-void BSP_LCD_GLASS_ClearBar(uint32_t BarId)
-{
- uint32_t position = 0;
-
- /* Check which bar is selected */
- while ((BarId) >> position)
- {
- /* Check if current bar is selected */
- switch(BarId & (1 << position))
- {
- /* Bar 0 */
- case LCD_BAR_0:
- /* Set BAR0 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG) , 0);
- break;
-
- /* Bar 1 */
- case LCD_BAR_1:
- /* Set BAR1 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG), 0);
- break;
-
- /* Bar 2 */
- case LCD_BAR_2:
- /* Set BAR2 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR2_SEG), 0);
- break;
-
- /* Bar 3 */
- case LCD_BAR_3:
- /* Set BAR3 */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR3_SEG), 0);
- break;
-
- default:
- break;
- }
- position++;
- }
-
- /* Update the LCD display */
- HAL_LCD_UpdateDisplayRequest(&LCDHandle);
-}
-
-/**
- * @brief Configure the bar level on LCD by writing bar value in LCD frame buffer.
- * @param BarLevel: specifies the LCD GLASS Battery Level.
- * This parameter can be one of the following values:
- * @arg BATTERYLEVEL_OFF: LCD GLASS Battery Empty
- * @arg BATTERYLEVEL_1_4: LCD GLASS Battery 1/4 Full
- * @arg BATTERYLEVEL_1_2: LCD GLASS Battery 1/2 Full
- * @arg BATTERYLEVEL_3_4: LCD GLASS Battery 3/4 Full
- * @arg BATTERYLEVEL_FULL: LCD GLASS Battery Full
- * @retval None
- */
-void BSP_LCD_GLASS_BarLevelConfig(uint8_t BarLevel)
-{
- switch (BarLevel)
- {
- /* BATTERYLEVEL_OFF */
- case BATTERYLEVEL_OFF:
- /* Set BAR0 & BAR2 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG | LCD_BAR2_SEG), 0);
- /* Set BAR1 & BAR3 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG | LCD_BAR3_SEG), 0);
- LCDBar = BATTERYLEVEL_OFF;
- break;
-
- /* BARLEVEL 1/4 */
- case BATTERYLEVEL_1_4:
- /* Set BAR0 on & BAR2 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG | LCD_BAR2_SEG), LCD_BAR0_SEG);
- /* Set BAR1 & BAR3 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG | LCD_BAR3_SEG), 0);
- LCDBar = BATTERYLEVEL_1_4;
- break;
-
- /* BARLEVEL 1/2 */
- case BATTERYLEVEL_1_2:
- /* Set BAR0 on & BAR2 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG | LCD_BAR2_SEG), LCD_BAR0_SEG);
- /* Set BAR1 on & BAR3 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG | LCD_BAR3_SEG), LCD_BAR1_SEG);
- LCDBar = BATTERYLEVEL_1_2;
- break;
-
- /* Battery Level 3/4 */
- case BATTERYLEVEL_3_4:
- /* Set BAR0 & BAR2 on */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG | LCD_BAR2_SEG), (LCD_BAR0_SEG | LCD_BAR2_SEG));
- /* Set BAR1 on & BAR3 off */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG | LCD_BAR3_SEG), LCD_BAR1_SEG);
- LCDBar = BATTERYLEVEL_3_4;
- break;
-
- /* BATTERYLEVEL_FULL */
- case BATTERYLEVEL_FULL:
- /* Set BAR0 & BAR2 on */
- HAL_LCD_Write(&LCDHandle, LCD_BAR0_2_COM, ~(LCD_BAR0_SEG | LCD_BAR2_SEG), (LCD_BAR0_SEG | LCD_BAR2_SEG));
- /* Set BAR1 on & BAR3 on */
- HAL_LCD_Write(&LCDHandle, LCD_BAR1_3_COM, ~(LCD_BAR1_SEG | LCD_BAR3_SEG), (LCD_BAR1_SEG | LCD_BAR3_SEG));
- LCDBar = BATTERYLEVEL_FULL;
- break;
-
- default:
- break;
- }
-
- /* Update the LCD display */
- HAL_LCD_UpdateDisplayRequest(&LCDHandle);
-}
-
-/**
- * @brief Write a character in the LCD RAM buffer.
- * @param ch: The character to display.
- * @param Point: A point to add in front of char.
- * This parameter can be one of the following values:
- * @arg POINT_OFF: No point to add in front of char.
- * @arg POINT_ON: Add a point in front of char.
- * @param Colon: Flag indicating if a colon character has to be added in front
- * of displayed character.
- * This parameter can be one of the following values:
- * @arg DOUBLEPOINT_OFF: No colon to add in back of char.
- * @arg DOUBLEPOINT_ON: Add an colon in back of char.
- * @param Position: Position in the LCD of the character to write.
- * This parameter can be any value in range [1:6].
- * @retval None
- * @note Required preconditions: The LCD should be cleared before to start the
- * write operation.
- */
-void BSP_LCD_GLASS_DisplayChar(uint8_t* ch, Point_Typedef Point, DoublePoint_Typedef Colon, DigitPosition_Typedef Position)
-{
- WriteChar(ch, Point, Colon, Position);
-
- /* Update the LCD display */
- HAL_LCD_UpdateDisplayRequest(&LCDHandle);
-}
-
-/**
- * @brief Write a character string in the LCD RAM buffer.
- * @param ptr: Pointer to string to display on the LCD Glass.
- * @retval None
- */
-void BSP_LCD_GLASS_DisplayString(uint8_t* ptr)
-{
- DigitPosition_Typedef position = LCD_DIGIT_POSITION_1;
-
- /* Send the string character by character on lCD */
- while ((*ptr != 0) & (position <= LCD_DIGIT_POSITION_6))
- {
- /* Write one character on LCD */
- WriteChar(ptr, POINT_OFF, DOUBLEPOINT_OFF, position);
-
- /* Point on the next character */
- ptr++;
-
- /* Increment the character counter */
- position++;
- }
- /* Update the LCD display */
- HAL_LCD_UpdateDisplayRequest(&LCDHandle);
-}
-
-/**
- * @brief Write a character string with decimal point in the LCD RAM buffer.
- * @param ptr: Pointer to string to display on the LCD Glass.
- * @retval None
- * @note Required preconditions: Char is ASCCI value "ORed" with decimal point or Colon flag
- */
-void BSP_LCD_GLASS_DisplayStrDeci(uint16_t* ptr)
-{
- DigitPosition_Typedef index = LCD_DIGIT_POSITION_1;
- uint8_t tmpchar = 0;
-
- /* Send the string character by character on lCD */
- while((*ptr != 0) & (index <= LCD_DIGIT_POSITION_6))
- {
- tmpchar = (*ptr) & 0x00FF;
-
- switch((*ptr) & 0xF000)
- {
- case DOT:
- /* Write one character on LCD with decimal point */
- WriteChar(&tmpchar, POINT_ON, DOUBLEPOINT_OFF, index);
- break;
- case DOUBLE_DOT:
- /* Write one character on LCD with decimal point */
- WriteChar(&tmpchar, POINT_OFF, DOUBLEPOINT_ON, index);
- break;
- default:
- WriteChar(&tmpchar, POINT_OFF, DOUBLEPOINT_OFF, index);
- break;
- }/* Point on the next character */
- ptr++;
-
- /* Increment the character counter */
- index++;
- }
- /* Update the LCD display */
- HAL_LCD_UpdateDisplayRequest(&LCDHandle);
-}
-
-/**
- * @brief Clear the whole LCD RAM buffer.
- * @retval None
- */
-void BSP_LCD_GLASS_Clear(void)
-{
- HAL_LCD_Clear(&LCDHandle);
-}
-
-/**
- * @brief Display a string in scrolling mode
- * @param ptr: Pointer to string to display on the LCD Glass.
- * @param nScroll: Specifies how many time the message will be scrolled
- * @param ScrollSpeed : Specifies the speed of the scroll, low value gives
- * higher speed
- * @retval None
- * @note Required preconditions: The LCD should be cleared before to start the
- * write operation.
- */
-void BSP_LCD_GLASS_ScrollSentence(uint8_t* ptr, uint16_t nScroll, uint16_t ScrollSpeed)
-{
- uint8_t repetition = 0, nbrchar = 0, sizestr = 0;
- uint8_t* ptr1;
- uint8_t str[6] = "";
-
- /* Reset interrupt variable in case key was press before entering function */
- bLCDGlass_KeyPressed = 0;
-
- if(ptr == 0)
- {
- return;
- }
-
- /* To calculate end of string */
- for(ptr1 = ptr, sizestr = 0; *ptr1 != 0; sizestr++, ptr1++);
-
- ptr1 = ptr;
-
- BSP_LCD_GLASS_DisplayString(str);
- HAL_Delay(ScrollSpeed);
-
- /* To shift the string for scrolling display*/
- for (repetition = 0; repetition < nScroll; repetition++)
- {
- for(nbrchar = 0; nbrchar < sizestr; nbrchar++)
- {
- *(str) =* (ptr1+((nbrchar+1)%sizestr));
- *(str+1) =* (ptr1+((nbrchar+2)%sizestr));
- *(str+2) =* (ptr1+((nbrchar+3)%sizestr));
- *(str+3) =* (ptr1+((nbrchar+4)%sizestr));
- *(str+4) =* (ptr1+((nbrchar+5)%sizestr));
- *(str+5) =* (ptr1+((nbrchar+6)%sizestr));
- BSP_LCD_GLASS_Clear();
- BSP_LCD_GLASS_DisplayString(str);
-
- /* user button pressed stop the scrolling sentence */
- if(bLCDGlass_KeyPressed)
- {
- bLCDGlass_KeyPressed = 0;
- return;
- }
- HAL_Delay(ScrollSpeed);
- }
- }
-}
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_LCD_Private_Functions
- * @{
- */
-
-/**
- * @brief Initialize the LCD MSP.
- * @param hlcd: LCD handle
- * @retval None
- */
-static void LCD_MspInit(LCD_HandleTypeDef *hlcd)
-{
- GPIO_InitTypeDef gpioinitstruct = {0};
- RCC_OscInitTypeDef oscinitstruct = {0};
- RCC_PeriphCLKInitTypeDef periphclkstruct = {0};
-
- /*##-1- Enable PWR peripheral Clock #######################################*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /*##-2- Configure LSE as RTC clock soucre ###################################*/
- oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- oscinitstruct.PLL.PLLState = RCC_PLL_NONE;
- oscinitstruct.LSEState = RCC_LSE_ON;
- if(HAL_RCC_OscConfig(&oscinitstruct) != HAL_OK)
- {
- while(1);
- }
-
- /*##-3- Select LSE as RTC clock source.##########################*/
- /* Backup domain management is done in RCC function */
- periphclkstruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
- periphclkstruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
- HAL_RCCEx_PeriphCLKConfig(&periphclkstruct);
-
- /*##-4- Enable LCD GPIO Clocks #############################################*/
- __HAL_RCC_GPIOA_CLK_ENABLE();
- __HAL_RCC_GPIOB_CLK_ENABLE();
- __HAL_RCC_GPIOC_CLK_ENABLE();
- __HAL_RCC_GPIOD_CLK_ENABLE();
-
-
- /*##-5- Configure peripheral GPIO ##########################################*/
- /* Configure Output for LCD */
- /* Port A */
- gpioinitstruct.Pin = LCD_GPIO_BANKA_PINS;
- gpioinitstruct.Mode = GPIO_MODE_AF_PP;
- gpioinitstruct.Pull = GPIO_NOPULL;
- gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- gpioinitstruct.Alternate = GPIO_AF11_LCD;
- HAL_GPIO_Init(GPIOA, &gpioinitstruct);
-
- /* Port B */
- gpioinitstruct.Pin = LCD_GPIO_BANKB_PINS;
- HAL_GPIO_Init(GPIOB, &gpioinitstruct);
-
- /* Port C*/
- gpioinitstruct.Pin = LCD_GPIO_BANKC_PINS;
- HAL_GPIO_Init(GPIOC, &gpioinitstruct);
-
- /* Port D */
- gpioinitstruct.Pin = LCD_GPIO_BANKD_PINS;
- HAL_GPIO_Init(GPIOD, &gpioinitstruct);
-
- /* Wait for the external capacitor Cext which is connected to the VLCD pin is charged
- (approximately 2ms for Cext=1uF) */
- HAL_Delay(2);
-
- /*##-6- Enable LCD peripheral Clock ########################################*/
- __HAL_RCC_LCD_CLK_ENABLE();
-}
-
-/**
- * @brief DeInitialize the LCD MSP.
- * @param hlcd: LCD handle
- * @retval None
- */
-static void LCD_MspDeInit(LCD_HandleTypeDef *hlcd)
-{
- uint32_t gpiopin = 0;
-
- /*##-1- Enable LCD GPIO Clocks #############################################*/
- __HAL_RCC_GPIOA_CLK_ENABLE();
- __HAL_RCC_GPIOB_CLK_ENABLE();
- __HAL_RCC_GPIOC_CLK_ENABLE();
- __HAL_RCC_GPIOD_CLK_ENABLE();
-
- /*##-1- Configure peripheral GPIO ##########################################*/
- /* Configure Output for LCD */
- /* Port A */
- gpiopin = LCD_GPIO_BANKA_PINS;
- HAL_GPIO_DeInit(GPIOA, gpiopin);
-
- /* Port B */
- gpiopin = LCD_GPIO_BANKB_PINS;
- HAL_GPIO_DeInit(GPIOB, gpiopin);
-
- /* Port C*/
- gpiopin = LCD_GPIO_BANKC_PINS;
- HAL_GPIO_DeInit(GPIOC, gpiopin);
-
- /* Port D */
- gpiopin = LCD_GPIO_BANKD_PINS;
- HAL_GPIO_DeInit(GPIOD, gpiopin);
-
- /*##-5- Enable LCD peripheral Clock ########################################*/
- __HAL_RCC_LCD_CLK_DISABLE();
-}
-
-/**
- * @brief Convert an ascii char to the a LCD digit.
- * @param Char: a char to display.
- * @param Point: a point to add in front of char
- * This parameter can be: POINT_OFF or POINT_ON
- * @param Colon : flag indicating if a colon character has to be added in front
- * of displayed character.
- * This parameter can be: DOUBLEPOINT_OFF or DOUBLEPOINT_ON.
- * @retval None
- */
-static void Convert(uint8_t* Char, Point_Typedef Point, DoublePoint_Typedef Colon)
-{
- uint16_t ch = 0 ;
- uint8_t loop = 0, index = 0;
-
- switch (*Char)
- {
- case ' ' :
- ch = 0x00;
- break;
-
- case '*':
- ch = C_STAR;
- break;
-
- case '(' :
- ch = C_OPENPARMAP;
- break;
-
- case ')' :
- ch = C_CLOSEPARMAP;
- break;
-
- case 'd' :
- ch = C_DMAP;
- break;
-
- case 'm' :
- ch = C_MMAP;
- break;
-
- case 'n' :
- ch = C_NMAP;
- break;
-
- case 'u' :
- ch = C_UMAP;
- break;
-
- case '-' :
- ch = C_MINUS;
- break;
-
- case '+' :
- ch = C_PLUS;
- break;
-
- case '/' :
- ch = C_SLATCH;
- break;
-
- case '�' :
- ch = C_PERCENT_1;
- break;
- case '%' :
- ch = C_PERCENT_2;
- break;
- case 255 :
- ch = C_FULL;
- break ;
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- ch = NumberMap[*Char - ASCII_CHAR_0];
- break;
-
- default:
- /* The character Char is one letter in upper case*/
- if ( (*Char < ASCII_CHAR_LEFT_OPEN_BRACKET) && (*Char > ASCII_CHAR_AT_SYMBOL) )
- {
- ch = CapLetterMap[*Char - 'A'];
- }
- /* The character Char is one letter in lower case*/
- if ( (*Char < ASCII_CHAR_LEFT_OPEN_BRACE) && ( *Char > ASCII_CHAR_APOSTROPHE) )
- {
- ch = CapLetterMap[*Char - 'a'];
- }
- break;
- }
-
- /* Set the digital point can be displayed if the point is on */
- if (Point == POINT_ON)
- {
- ch |= 0x0002;
- }
-
- /* Set the "COL" segment in the character that can be displayed if the colon is on */
- if (Colon == DOUBLEPOINT_ON)
- {
- ch |= 0x0020;
- }
-
- for (loop = 12,index=0 ;index < 4; loop -= 4,index++)
- {
- Digit[index] = (ch >> loop) & 0x0f; /*To isolate the less significant digit */
- }
-}
-
-/**
- * @brief Write a character in the LCD frame buffer.
- * @param ch: the character to display.
- * @param Point: a point to add in front of char
- * This parameter can be: POINT_OFF or POINT_ON
- * @param Colon: flag indicating if a colon character has to be added in front
- * of displayed character.
- * This parameter can be: DOUBLEPOINT_OFF or DOUBLEPOINT_ON.
- * @param Position: position in the LCD of the character to write [1:6]
- * @retval None
- */
-static void WriteChar(uint8_t* ch, Point_Typedef Point, DoublePoint_Typedef Colon, DigitPosition_Typedef Position)
-{
- uint32_t data =0x00;
- /* To convert displayed character in segment in array digit */
- Convert(ch, (Point_Typedef)Point, (DoublePoint_Typedef)Colon);
-
- switch (Position)
- {
- /* Position 1 on LCD (Digit1)*/
- case LCD_DIGIT_POSITION_1:
- data = ((Digit[0] & 0x1) << LCD_SEG0_SHIFT) | (((Digit[0] & 0x2) >> 1) << LCD_SEG1_SHIFT)
- | (((Digit[0] & 0x4) >> 2) << LCD_SEG22_SHIFT) | (((Digit[0] & 0x8) >> 3) << LCD_SEG23_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT1_COM0, LCD_DIGIT1_COM0_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = ((Digit[1] & 0x1) << LCD_SEG0_SHIFT) | (((Digit[1] & 0x2) >> 1) << LCD_SEG1_SHIFT)
- | (((Digit[1] & 0x4) >> 2) << LCD_SEG22_SHIFT) | (((Digit[1] & 0x8) >> 3) << LCD_SEG23_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT1_COM1, LCD_DIGIT1_COM1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = ((Digit[2] & 0x1) << LCD_SEG0_SHIFT) | (((Digit[2] & 0x2) >> 1) << LCD_SEG1_SHIFT)
- | (((Digit[2] & 0x4) >> 2) << LCD_SEG22_SHIFT) | (((Digit[2] & 0x8) >> 3) << LCD_SEG23_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT1_COM2, LCD_DIGIT1_COM2_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = ((Digit[3] & 0x1) << LCD_SEG0_SHIFT) | (((Digit[3] & 0x2) >> 1) << LCD_SEG1_SHIFT)
- | (((Digit[3] & 0x4) >> 2) << LCD_SEG22_SHIFT) | (((Digit[3] & 0x8) >> 3) << LCD_SEG23_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT1_COM3, LCD_DIGIT1_COM3_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
- break;
-
- /* Position 2 on LCD (Digit2)*/
- case LCD_DIGIT_POSITION_2:
- data = ((Digit[0] & 0x1) << LCD_SEG2_SHIFT) | (((Digit[0] & 0x2) >> 1) << LCD_SEG3_SHIFT)
- | (((Digit[0] & 0x4) >> 2) << LCD_SEG20_SHIFT) | (((Digit[0] & 0x8) >> 3) << LCD_SEG21_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT2_COM0, LCD_DIGIT2_COM0_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = ((Digit[1] & 0x1) << LCD_SEG2_SHIFT) | (((Digit[1] & 0x2) >> 1) << LCD_SEG3_SHIFT)
- | (((Digit[1] & 0x4) >> 2) << LCD_SEG20_SHIFT) | (((Digit[1] & 0x8) >> 3) << LCD_SEG21_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT2_COM1, LCD_DIGIT2_COM1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = ((Digit[2] & 0x1) << LCD_SEG2_SHIFT) | (((Digit[2] & 0x2) >> 1) << LCD_SEG3_SHIFT)
- | (((Digit[2] & 0x4) >> 2) << LCD_SEG20_SHIFT) | (((Digit[2] & 0x8) >> 3) << LCD_SEG21_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT2_COM2, LCD_DIGIT2_COM2_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = ((Digit[3] & 0x1) << LCD_SEG2_SHIFT) | (((Digit[3] & 0x2) >> 1) << LCD_SEG3_SHIFT)
- | (((Digit[3] & 0x4) >> 2) << LCD_SEG20_SHIFT) | (((Digit[3] & 0x8) >> 3) << LCD_SEG21_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT2_COM3, LCD_DIGIT2_COM3_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
- break;
-
- /* Position 3 on LCD (Digit3)*/
- case LCD_DIGIT_POSITION_3:
- data = ((Digit[0] & 0x1) << LCD_SEG4_SHIFT) | (((Digit[0] & 0x2) >> 1) << LCD_SEG5_SHIFT)
- | (((Digit[0] & 0x4) >> 2) << LCD_SEG18_SHIFT) | (((Digit[0] & 0x8) >> 3) << LCD_SEG19_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT3_COM0, LCD_DIGIT3_COM0_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = ((Digit[1] & 0x1) << LCD_SEG4_SHIFT) | (((Digit[1] & 0x2) >> 1) << LCD_SEG5_SHIFT)
- | (((Digit[1] & 0x4) >> 2) << LCD_SEG18_SHIFT) | (((Digit[1] & 0x8) >> 3) << LCD_SEG19_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT3_COM1, LCD_DIGIT3_COM1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = ((Digit[2] & 0x1) << LCD_SEG4_SHIFT) | (((Digit[2] & 0x2) >> 1) << LCD_SEG5_SHIFT)
- | (((Digit[2] & 0x4) >> 2) << LCD_SEG18_SHIFT) | (((Digit[2] & 0x8) >> 3) << LCD_SEG19_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT3_COM2, LCD_DIGIT3_COM2_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = ((Digit[3] & 0x1) << LCD_SEG4_SHIFT) | (((Digit[3] & 0x2) >> 1) << LCD_SEG5_SHIFT)
- | (((Digit[3] & 0x4) >> 2) << LCD_SEG18_SHIFT) | (((Digit[3] & 0x8) >> 3) << LCD_SEG19_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT3_COM3, LCD_DIGIT3_COM3_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
- break;
-
- /* Position 4 on LCD (Digit4)*/
- case LCD_DIGIT_POSITION_4:
- data = ((Digit[0] & 0x1) << LCD_SEG6_SHIFT) | (((Digit[0] & 0x8) >> 3) << LCD_SEG17_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM0, LCD_DIGIT4_COM0_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = (((Digit[0] & 0x2) >> 1) << LCD_SEG7_SHIFT) | (((Digit[0] & 0x4) >> 2) << LCD_SEG16_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM0_1, LCD_DIGIT4_COM0_1_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = ((Digit[1] & 0x1) << LCD_SEG6_SHIFT) | (((Digit[1] & 0x8) >> 3) << LCD_SEG17_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM1, LCD_DIGIT4_COM1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = (((Digit[1] & 0x2) >> 1) << LCD_SEG7_SHIFT) | (((Digit[1] & 0x4) >> 2) << LCD_SEG16_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM1_1, LCD_DIGIT4_COM1_1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = ((Digit[2] & 0x1) << LCD_SEG6_SHIFT) | (((Digit[2] & 0x8) >> 3) << LCD_SEG17_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM2, LCD_DIGIT4_COM2_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = (((Digit[2] & 0x2) >> 1) << LCD_SEG7_SHIFT) | (((Digit[2] & 0x4) >> 2) << LCD_SEG16_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM2_1, LCD_DIGIT4_COM2_1_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = ((Digit[3] & 0x1) << LCD_SEG6_SHIFT) | (((Digit[3] & 0x8) >> 3) << LCD_SEG17_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM3, LCD_DIGIT4_COM3_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
-
- data = (((Digit[3] & 0x2) >> 1) << LCD_SEG7_SHIFT) | (((Digit[3] & 0x4) >> 2) << LCD_SEG16_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT4_COM3_1, LCD_DIGIT4_COM3_1_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
- break;
-
- /* Position 5 on LCD (Digit5)*/
- case LCD_DIGIT_POSITION_5:
- data = (((Digit[0] & 0x2) >> 1) << LCD_SEG9_SHIFT) | (((Digit[0] & 0x4) >> 2) << LCD_SEG14_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM0, LCD_DIGIT5_COM0_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = ((Digit[0] & 0x1) << LCD_SEG8_SHIFT) | (((Digit[0] & 0x8) >> 3) << LCD_SEG15_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM0_1, LCD_DIGIT5_COM0_1_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = (((Digit[1] & 0x2) >> 1) << LCD_SEG9_SHIFT) | (((Digit[1] & 0x4) >> 2) << LCD_SEG14_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM1, LCD_DIGIT5_COM1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = ((Digit[1] & 0x1) << LCD_SEG8_SHIFT) | (((Digit[1] & 0x8) >> 3) << LCD_SEG15_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM1_1, LCD_DIGIT5_COM1_1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = (((Digit[2] & 0x2) >> 1) << LCD_SEG9_SHIFT) | (((Digit[2] & 0x4) >> 2) << LCD_SEG14_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM2, LCD_DIGIT5_COM2_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = ((Digit[2] & 0x1) << LCD_SEG8_SHIFT) | (((Digit[2] & 0x8) >> 3) << LCD_SEG15_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM2_1, LCD_DIGIT5_COM2_1_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = (((Digit[3] & 0x2) >> 1) << LCD_SEG9_SHIFT) | (((Digit[3] & 0x4) >> 2) << LCD_SEG14_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM3, LCD_DIGIT5_COM3_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
-
- data = ((Digit[3] & 0x1) << LCD_SEG8_SHIFT) | (((Digit[3] & 0x8) >> 3) << LCD_SEG15_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT5_COM3_1, LCD_DIGIT5_COM3_1_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
- break;
-
- /* Position 6 on LCD (Digit6)*/
- case LCD_DIGIT_POSITION_6:
- data = ((Digit[0] & 0x1) << LCD_SEG10_SHIFT) | (((Digit[0] & 0x2) >> 1) << LCD_SEG11_SHIFT)
- | (((Digit[0] & 0x4) >> 2) << LCD_SEG12_SHIFT) | (((Digit[0] & 0x8) >> 3) << LCD_SEG13_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT6_COM0, LCD_DIGIT6_COM0_SEG_MASK, data); /* 1G 1B 1M 1E */
-
- data = ((Digit[1] & 0x1) << LCD_SEG10_SHIFT) | (((Digit[1] & 0x2) >> 1) << LCD_SEG11_SHIFT)
- | (((Digit[1] & 0x4) >> 2) << LCD_SEG12_SHIFT) | (((Digit[1] & 0x8) >> 3) << LCD_SEG13_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT6_COM1, LCD_DIGIT6_COM1_SEG_MASK, data) ; /* 1F 1A 1C 1D */
-
- data = ((Digit[2] & 0x1) << LCD_SEG10_SHIFT) | (((Digit[2] & 0x2) >> 1) << LCD_SEG11_SHIFT)
- | (((Digit[2] & 0x4) >> 2) << LCD_SEG12_SHIFT) | (((Digit[2] & 0x8) >> 3) << LCD_SEG13_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT6_COM2, LCD_DIGIT6_COM2_SEG_MASK, data) ; /* 1Q 1K 1Col 1P */
-
- data = ((Digit[3] & 0x1) << LCD_SEG10_SHIFT) | (((Digit[3] & 0x2) >> 1) << LCD_SEG11_SHIFT)
- | (((Digit[3] & 0x4) >> 2) << LCD_SEG12_SHIFT) | (((Digit[3] & 0x8) >> 3) << LCD_SEG13_SHIFT);
- HAL_LCD_Write(&LCDHandle, LCD_DIGIT6_COM3, LCD_DIGIT6_COM3_SEG_MASK, data) ; /* 1H 1J 1DP 1N */
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery_glass_lcd.h
--- a/stm32l476g_discovery_glass_lcd.h Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,547 +0,0 @@
- /**
- ******************************************************************************
- * @file stm32l476g_discovery_glass_lcd.h
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief Header file for stm32l476g_discovery_glass_lcd.c module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L476G_DISCOVERY_GLASS_LCD_H
-#define __STM32L476G_DISCOVERY_GLASS_LCD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l476g_discovery.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_GLASS_LCD
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup STM32L476G_DISCOVERY_GLASS_LCD_Exported_Types Exported Types
- * @{
- */
-/**
- * @brief LCD Glass digit position
- */
-typedef enum
-{
- LCD_DIGIT_POSITION_1 = 0,
- LCD_DIGIT_POSITION_2 = 1,
- LCD_DIGIT_POSITION_3 = 2,
- LCD_DIGIT_POSITION_4 = 3,
- LCD_DIGIT_POSITION_5 = 4,
- LCD_DIGIT_POSITION_6 = 5,
- LCD_DIGIT_MAX_NUMBER = 6,
-}DigitPosition_Typedef;
-/**
- * @brief LCD Glass point
- * Warning: element values correspond to LCD Glass point.
- */
-
-typedef enum
-{
- POINT_OFF = 0,
- POINT_ON = 1
-}Point_Typedef;
-
-/**
- * @brief LCD Glass Double point
- * Warning: element values correspond to LCD Glass Double point.
- */
-typedef enum
-{
- DOUBLEPOINT_OFF = 0,
- DOUBLEPOINT_ON = 1
-}DoublePoint_Typedef;
-
-/**
- * @brief LCD Glass Battery Level
- * element values correspond to different LCD Glass battery levels
- */
-typedef enum
-{
- BATTERYLEVEL_OFF = 0,
- BATTERYLEVEL_1_4 = 1,
- BATTERYLEVEL_1_2 = 2,
- BATTERYLEVEL_3_4 = 3,
- BATTERYLEVEL_FULL = 4
-}BatteryLevel_Typedef;
-
-/**
- * @brief LCD Glass Bar Id
- */
-typedef enum
-{
- LCD_BAR_NONE = 0,
- LCD_BAR_0 = (1 << 0),
- LCD_BAR_1 = (1 << 1),
- LCD_BAR_2 = (1 << 2),
- LCD_BAR_3 = (1 << 3)
-}BarId_Typedef;
-/**
- * @}
- */
-
-/** @defgroup STM32L476G_DISCOVERY_GLASS_LCD_Exported_Constants Exported Constants
- * @{
-*/
-/**
- * @brief LCD digit defintion
- */
-#define COM_PER_DIGIT_NB 4/*!< Specifies number of COM to address a digit */
-#define SEG_PER_DIGIT_NB 4/*!< Specifies number of SEG to address a digit */
-
-#define LCD_MAP_CHAR_COM0_SEG_1ST_POS (1 << LCD_MAP_CHAR_COM0_SEG_1ST_SHIFT)
-#define LCD_MAP_CHAR_COM0_SEG_2ND_POS (1 << LCD_MAP_CHAR_COM0_SEG_2ND_SHIFT)
-#define LCD_MAP_CHAR_COM0_SEG_3RD_POS (1 << LCD_MAP_CHAR_COM0_SEG_3RD_SHIFT)
-#define LCD_MAP_CHAR_COM0_SEG_4TH_POS (1 << LCD_MAP_CHAR_COM0_SEG_4TH_SHIFT)
-#define LCD_MAP_CHAR_COM1_SEG_1ST_POS (1 << LCD_MAP_CHAR_COM1_SEG_1ST_SHIFT)
-#define LCD_MAP_CHAR_COM1_SEG_2ND_POS (1 << LCD_MAP_CHAR_COM1_SEG_2ND_SHIFT)
-#define LCD_MAP_CHAR_COM1_SEG_3RD_POS (1 << LCD_MAP_CHAR_COM1_SEG_3RD_SHIFT)
-#define LCD_MAP_CHAR_COM1_SEG_4TH_POS (1 << LCD_MAP_CHAR_COM1_SEG_4TH_SHIFT)
-#define LCD_MAP_CHAR_COM2_SEG_1ST_POS (1 << LCD_MAP_CHAR_COM2_SEG_1ST_SHIFT)
-#define LCD_MAP_CHAR_COM2_SEG_2ND_POS (1 << LCD_MAP_CHAR_COM2_SEG_2ND_SHIFT)
-#define LCD_MAP_CHAR_COM2_SEG_3RD_POS (1 << LCD_MAP_CHAR_COM2_SEG_3RD_SHIFT)
-#define LCD_MAP_CHAR_COM2_SEG_4TH_POS (1 << LCD_MAP_CHAR_COM2_SEG_4TH_SHIFT)
-#define LCD_MAP_CHAR_COM3_SEG_1ST_POS (1 << LCD_MAP_CHAR_COM3_SEG_1ST_SHIFT)
-#define LCD_MAP_CHAR_COM3_SEG_2ND_POS (1 << LCD_MAP_CHAR_COM3_SEG_2ND_SHIFT)
-#define LCD_MAP_CHAR_COM3_SEG_3RD_POS (1 << LCD_MAP_CHAR_COM3_SEG_3RD_SHIFT)
-#define LCD_MAP_CHAR_COM3_SEG_4TH_POS (1 << LCD_MAP_CHAR_COM3_SEG_4TH_SHIFT)
-#define LCD_MAP_CHAR_COM0_SEG_1ST_SHIFT 0x00000000
-#define LCD_MAP_CHAR_COM0_SEG_2ND_SHIFT 0x00000001
-#define LCD_MAP_CHAR_COM0_SEG_3RD_SHIFT 0x00000002
-#define LCD_MAP_CHAR_COM0_SEG_4TH_SHIFT 0x00000003
-#define LCD_MAP_CHAR_COM1_SEG_1ST_SHIFT 0x00000004
-#define LCD_MAP_CHAR_COM1_SEG_2ND_SHIFT 0x00000005
-#define LCD_MAP_CHAR_COM1_SEG_3RD_SHIFT 0x00000006
-#define LCD_MAP_CHAR_COM1_SEG_4TH_SHIFT 0x00000007
-#define LCD_MAP_CHAR_COM2_SEG_1ST_SHIFT 0x00000008
-#define LCD_MAP_CHAR_COM2_SEG_2ND_SHIFT 0x00000009
-#define LCD_MAP_CHAR_COM2_SEG_3RD_SHIFT 0x00000010
-#define LCD_MAP_CHAR_COM2_SEG_4TH_SHIFT 0x00000011
-#define LCD_MAP_CHAR_COM3_SEG_1ST_SHIFT 0x00000012
-#define LCD_MAP_CHAR_COM3_SEG_2ND_SHIFT 0x00000013
-#define LCD_MAP_CHAR_COM3_SEG_3RD_SHIFT 0x00000014
-#define LCD_MAP_CHAR_COM3_SEG_4TH_SHIFT 0x00000015
-
-/**
- * @brief LCD Digit defines
- */
-#define LCD_DIGIT1_COM0 LCD_COM0
-#define LCD_DIGIT1_COM0_SEG_MASK ~(LCD_SEG0 | LCD_SEG1 | LCD_SEG22 | LCD_SEG23)
-#define LCD_DIGIT1_COM1 LCD_COM1
-#define LCD_DIGIT1_COM1_SEG_MASK ~(LCD_SEG0 | LCD_SEG1 | LCD_SEG22 | LCD_SEG23)
-#define LCD_DIGIT1_COM2 LCD_COM2
-#define LCD_DIGIT1_COM2_SEG_MASK ~(LCD_SEG0 | LCD_SEG1 | LCD_SEG22 | LCD_SEG23)
-#define LCD_DIGIT1_COM3 LCD_COM3
-#define LCD_DIGIT1_COM3_SEG_MASK ~(LCD_SEG0 | LCD_SEG1 | LCD_SEG22 | LCD_SEG23)
-
-#define LCD_DIGIT2_COM0 LCD_COM0
-#define LCD_DIGIT2_COM0_SEG_MASK ~(LCD_SEG2 | LCD_SEG3 | LCD_SEG20 | LCD_SEG21)
-#define LCD_DIGIT2_COM1 LCD_COM1
-#define LCD_DIGIT2_COM1_SEG_MASK ~(LCD_SEG2 | LCD_SEG3 | LCD_SEG20 | LCD_SEG21)
-#define LCD_DIGIT2_COM2 LCD_COM2
-#define LCD_DIGIT2_COM2_SEG_MASK ~(LCD_SEG2 | LCD_SEG3 | LCD_SEG20 | LCD_SEG21)
-#define LCD_DIGIT2_COM3 LCD_COM3
-#define LCD_DIGIT2_COM3_SEG_MASK ~(LCD_SEG2 | LCD_SEG3 | LCD_SEG20 | LCD_SEG21)
-
-#define LCD_DIGIT3_COM0 LCD_COM0
-#define LCD_DIGIT3_COM0_SEG_MASK ~(LCD_SEG4 | LCD_SEG5 | LCD_SEG18 | LCD_SEG19)
-#define LCD_DIGIT3_COM1 LCD_COM1
-#define LCD_DIGIT3_COM1_SEG_MASK ~(LCD_SEG4 | LCD_SEG5 | LCD_SEG18 | LCD_SEG19)
-#define LCD_DIGIT3_COM2 LCD_COM2
-#define LCD_DIGIT3_COM2_SEG_MASK ~(LCD_SEG4 | LCD_SEG5 | LCD_SEG18 | LCD_SEG19)
-#define LCD_DIGIT3_COM3 LCD_COM3
-#define LCD_DIGIT3_COM3_SEG_MASK ~(LCD_SEG4 | LCD_SEG5 | LCD_SEG18 | LCD_SEG19)
-
-#define LCD_DIGIT4_COM0 LCD_COM0
-#define LCD_DIGIT4_COM0_SEG_MASK ~(LCD_SEG6 | LCD_SEG17)
-#define LCD_DIGIT4_COM0_1 LCD_COM0_1
-#define LCD_DIGIT4_COM0_1_SEG_MASK ~(LCD_SEG7 | LCD_SEG16)
-#define LCD_DIGIT4_COM1 LCD_COM1
-#define LCD_DIGIT4_COM1_SEG_MASK ~(LCD_SEG6 | LCD_SEG17)
-#define LCD_DIGIT4_COM1_1 LCD_COM1_1
-#define LCD_DIGIT4_COM1_1_SEG_MASK ~(LCD_SEG7 | LCD_SEG16)
-#define LCD_DIGIT4_COM2 LCD_COM2
-#define LCD_DIGIT4_COM2_SEG_MASK ~(LCD_SEG6 | LCD_SEG17)
-#define LCD_DIGIT4_COM2_1 LCD_COM2_1
-#define LCD_DIGIT4_COM2_1_SEG_MASK ~(LCD_SEG7 | LCD_SEG16)
-#define LCD_DIGIT4_COM3 LCD_COM3
-#define LCD_DIGIT4_COM3_SEG_MASK ~(LCD_SEG6 | LCD_SEG17)
-#define LCD_DIGIT4_COM3_1 LCD_COM3_1
-#define LCD_DIGIT4_COM3_1_SEG_MASK ~(LCD_SEG7 | LCD_SEG16)
-
-#define LCD_DIGIT5_COM0 LCD_COM0
-#define LCD_DIGIT5_COM0_SEG_MASK ~(LCD_SEG9 | LCD_SEG14)
-#define LCD_DIGIT5_COM0_1 LCD_COM0_1
-#define LCD_DIGIT5_COM0_1_SEG_MASK ~(LCD_SEG8 | LCD_SEG15)
-#define LCD_DIGIT5_COM1 LCD_COM1
-#define LCD_DIGIT5_COM1_SEG_MASK ~(LCD_SEG9 | LCD_SEG14)
-#define LCD_DIGIT5_COM1_1 LCD_COM1_1
-#define LCD_DIGIT5_COM1_1_SEG_MASK ~(LCD_SEG8 | LCD_SEG15)
-#define LCD_DIGIT5_COM2 LCD_COM2
-#define LCD_DIGIT5_COM2_SEG_MASK ~(LCD_SEG9 | LCD_SEG14)
-#define LCD_DIGIT5_COM2_1 LCD_COM2_1
-#define LCD_DIGIT5_COM2_1_SEG_MASK ~(LCD_SEG8 | LCD_SEG15)
-#define LCD_DIGIT5_COM3 LCD_COM3
-#define LCD_DIGIT5_COM3_SEG_MASK ~(LCD_SEG9 | LCD_SEG14)
-#define LCD_DIGIT5_COM3_1 LCD_COM3_1
-#define LCD_DIGIT5_COM3_1_SEG_MASK ~(LCD_SEG8 | LCD_SEG15)
-
-#define LCD_DIGIT6_COM0 LCD_COM0
-#define LCD_DIGIT6_COM0_SEG_MASK ~(LCD_SEG10 | LCD_SEG11 | LCD_SEG12 | LCD_SEG13)
-#define LCD_DIGIT6_COM1 LCD_COM1
-#define LCD_DIGIT6_COM1_SEG_MASK ~(LCD_SEG10 | LCD_SEG11 | LCD_SEG12 | LCD_SEG13)
-#define LCD_DIGIT6_COM2 LCD_COM2
-#define LCD_DIGIT6_COM2_SEG_MASK ~(LCD_SEG10 | LCD_SEG11 | LCD_SEG12 | LCD_SEG13)
-#define LCD_DIGIT6_COM3 LCD_COM3
-#define LCD_DIGIT6_COM3_SEG_MASK ~(LCD_SEG10 | LCD_SEG11 | LCD_SEG12 | LCD_SEG13)
-
-/**
- * @brief LCD Bar location
- */
-#define LCD_BAR0_2_COM LCD_COM3
-#define LCD_BAR1_3_COM LCD_COM2
-#define LCD_BAR0_SEG LCD_SEG11
-#define LCD_BAR1_SEG LCD_SEG11
-#define LCD_BAR2_SEG LCD_SEG9
-#define LCD_BAR3_SEG LCD_SEG9
-#define LCD_BAR0_2_SEG_MASK ~(LCD_BAR0_SEG | LCD_BAR2_SEG)
-#define LCD_BAR1_3_SEG_MASK ~(LCD_BAR1_SEG | LCD_BAR3_SEG)
-
-/**
- * @brief LCD segments & coms redefinition.
- * LCD component segments & coms are not necessarily link to MCU segmnents & coms output.
- */
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-#define LCD_COM0 MCU_LCD_COM0
-#define LCD_COM0_1 MCU_LCD_COM0_1
-#define LCD_COM1 MCU_LCD_COM1
-#define LCD_COM1_1 MCU_LCD_COM1_1
-#define LCD_COM2 MCU_LCD_COM2
-#define LCD_COM2_1 MCU_LCD_COM2_1
-#define LCD_COM3 MCU_LCD_COM3
-#define LCD_COM3_1 MCU_LCD_COM3_1
-#elif defined (USE_STM32L476G_DISCO_REVA)
-#define LCD_COM0 MCU_LCD_COM5
-#define LCD_COM0_1 MCU_LCD_COM5_1
-#define LCD_COM1 MCU_LCD_COM7
-#define LCD_COM1_1 MCU_LCD_COM7_1
-#define LCD_COM2 MCU_LCD_COM6
-#define LCD_COM2_1 MCU_LCD_COM6_1
-#define LCD_COM3 MCU_LCD_COM4
-#define LCD_COM3_1 MCU_LCD_COM4_1
-#endif
-#define LCD_SEG0 MCU_LCD_SEG4
-#define LCD_SEG1 MCU_LCD_SEG23
-#define LCD_SEG2 MCU_LCD_SEG6
-#define LCD_SEG3 MCU_LCD_SEG13
-#define LCD_SEG4 MCU_LCD_SEG15
-#define LCD_SEG5 MCU_LCD_SEG29
-#define LCD_SEG6 MCU_LCD_SEG31
-#define LCD_SEG7 MCU_LCD_SEG33
-#define LCD_SEG8 MCU_LCD_SEG35
-#define LCD_SEG9 MCU_LCD_SEG25
-#define LCD_SEG10 MCU_LCD_SEG17
-#define LCD_SEG11 MCU_LCD_SEG8
-#define LCD_SEG12 MCU_LCD_SEG9
-#define LCD_SEG13 MCU_LCD_SEG26
-#define LCD_SEG14 MCU_LCD_SEG24
-#define LCD_SEG15 MCU_LCD_SEG34
-#define LCD_SEG16 MCU_LCD_SEG32
-#define LCD_SEG17 MCU_LCD_SEG30
-#define LCD_SEG18 MCU_LCD_SEG28
-#define LCD_SEG19 MCU_LCD_SEG14
-#define LCD_SEG20 MCU_LCD_SEG12
-#define LCD_SEG21 MCU_LCD_SEG5
-#define LCD_SEG22 MCU_LCD_SEG22
-#define LCD_SEG23 MCU_LCD_SEG3
-#define LCD_SEG0_SHIFT MCU_LCD_SEG4_SHIFT
-#define LCD_SEG1_SHIFT MCU_LCD_SEG23_SHIFT
-#define LCD_SEG2_SHIFT MCU_LCD_SEG6_SHIFT
-#define LCD_SEG3_SHIFT MCU_LCD_SEG13_SHIFT
-#define LCD_SEG4_SHIFT MCU_LCD_SEG15_SHIFT
-#define LCD_SEG5_SHIFT MCU_LCD_SEG29_SHIFT
-#define LCD_SEG6_SHIFT MCU_LCD_SEG31_SHIFT
-#define LCD_SEG7_SHIFT MCU_LCD_SEG33_SHIFT
-#define LCD_SEG8_SHIFT MCU_LCD_SEG35_SHIFT
-#define LCD_SEG9_SHIFT MCU_LCD_SEG25_SHIFT
-#define LCD_SEG10_SHIFT MCU_LCD_SEG17_SHIFT
-#define LCD_SEG11_SHIFT MCU_LCD_SEG8_SHIFT
-#define LCD_SEG12_SHIFT MCU_LCD_SEG9_SHIFT
-#define LCD_SEG13_SHIFT MCU_LCD_SEG26_SHIFT
-#define LCD_SEG14_SHIFT MCU_LCD_SEG24_SHIFT
-#define LCD_SEG15_SHIFT MCU_LCD_SEG34_SHIFT
-#define LCD_SEG16_SHIFT MCU_LCD_SEG32_SHIFT
-#define LCD_SEG17_SHIFT MCU_LCD_SEG30_SHIFT
-#define LCD_SEG18_SHIFT MCU_LCD_SEG28_SHIFT
-#define LCD_SEG19_SHIFT MCU_LCD_SEG14_SHIFT
-#define LCD_SEG20_SHIFT MCU_LCD_SEG12_SHIFT
-#define LCD_SEG21_SHIFT MCU_LCD_SEG5_SHIFT
-#define LCD_SEG22_SHIFT MCU_LCD_SEG22_SHIFT
-#define LCD_SEG23_SHIFT MCU_LCD_SEG3_SHIFT
-
-/**
- * @brief STM32 LCD segments & coms definitions.
- */
-#define MCU_LCD_COM0 LCD_RAM_REGISTER0
-#define MCU_LCD_COM0_1 LCD_RAM_REGISTER1
-#define MCU_LCD_COM1 LCD_RAM_REGISTER2
-#define MCU_LCD_COM1_1 LCD_RAM_REGISTER3
-#define MCU_LCD_COM2 LCD_RAM_REGISTER4
-#define MCU_LCD_COM2_1 LCD_RAM_REGISTER5
-#define MCU_LCD_COM3 LCD_RAM_REGISTER6
-#define MCU_LCD_COM3_1 LCD_RAM_REGISTER7
-#define MCU_LCD_COM4 LCD_RAM_REGISTER8
-#define MCU_LCD_COM4_1 LCD_RAM_REGISTER9
-#define MCU_LCD_COM5 LCD_RAM_REGISTER10
-#define MCU_LCD_COM5_1 LCD_RAM_REGISTER11
-#define MCU_LCD_COM6 LCD_RAM_REGISTER12
-#define MCU_LCD_COM6_1 LCD_RAM_REGISTER13
-#define MCU_LCD_COM7 LCD_RAM_REGISTER14
-#define MCU_LCD_COM7_1 LCD_RAM_REGISTER15
-#define MCU_LCD_SEG0 (1U << MCU_LCD_SEG0_SHIFT)
-#define MCU_LCD_SEG1 (1U << MCU_LCD_SEG1_SHIFT)
-#define MCU_LCD_SEG2 (1U << MCU_LCD_SEG2_SHIFT)
-#define MCU_LCD_SEG3 (1U << MCU_LCD_SEG3_SHIFT)
-#define MCU_LCD_SEG4 (1U << MCU_LCD_SEG4_SHIFT)
-#define MCU_LCD_SEG5 (1U << MCU_LCD_SEG5_SHIFT)
-#define MCU_LCD_SEG6 (1U << MCU_LCD_SEG6_SHIFT)
-#define MCU_LCD_SEG7 (1U << MCU_LCD_SEG7_SHIFT)
-#define MCU_LCD_SEG8 (1U << MCU_LCD_SEG8_SHIFT)
-#define MCU_LCD_SEG9 (1U << MCU_LCD_SEG9_SHIFT)
-#define MCU_LCD_SEG10 (1U << MCU_LCD_SEG10_SHIFT)
-#define MCU_LCD_SEG11 (1U << MCU_LCD_SEG11_SHIFT)
-#define MCU_LCD_SEG12 (1U << MCU_LCD_SEG12_SHIFT)
-#define MCU_LCD_SEG13 (1U << MCU_LCD_SEG13_SHIFT)
-#define MCU_LCD_SEG14 (1U << MCU_LCD_SEG14_SHIFT)
-#define MCU_LCD_SEG15 (1U << MCU_LCD_SEG15_SHIFT)
-#define MCU_LCD_SEG16 (1U << MCU_LCD_SEG16_SHIFT)
-#define MCU_LCD_SEG17 (1U << MCU_LCD_SEG17_SHIFT)
-#define MCU_LCD_SEG18 (1U << MCU_LCD_SEG18_SHIFT)
-#define MCU_LCD_SEG19 (1U << MCU_LCD_SEG19_SHIFT)
-#define MCU_LCD_SEG20 (1U << MCU_LCD_SEG20_SHIFT)
-#define MCU_LCD_SEG21 (1U << MCU_LCD_SEG21_SHIFT)
-#define MCU_LCD_SEG22 (1U << MCU_LCD_SEG22_SHIFT)
-#define MCU_LCD_SEG23 (1U << MCU_LCD_SEG23_SHIFT)
-#define MCU_LCD_SEG24 (1U << MCU_LCD_SEG24_SHIFT)
-#define MCU_LCD_SEG25 (1U << MCU_LCD_SEG25_SHIFT)
-#define MCU_LCD_SEG26 (1U << MCU_LCD_SEG26_SHIFT)
-#define MCU_LCD_SEG27 (1U << MCU_LCD_SEG27_SHIFT)
-#define MCU_LCD_SEG28 (1U << MCU_LCD_SEG28_SHIFT)
-#define MCU_LCD_SEG29 (1U << MCU_LCD_SEG29_SHIFT)
-#define MCU_LCD_SEG30 (1U << MCU_LCD_SEG30_SHIFT)
-#define MCU_LCD_SEG31 (1U << MCU_LCD_SEG31_SHIFT)
-#define MCU_LCD_SEG32 (1U << MCU_LCD_SEG32_SHIFT)
-#define MCU_LCD_SEG33 (1U << MCU_LCD_SEG33_SHIFT)
-#define MCU_LCD_SEG34 (1U << MCU_LCD_SEG34_SHIFT)
-#define MCU_LCD_SEG35 (1U << MCU_LCD_SEG35_SHIFT)
-#define MCU_LCD_SEG36 (1U << MCU_LCD_SEG36_SHIFT)
-#define MCU_LCD_SEG37 (1U << MCU_LCD_SEG37_SHIFT)
-#define MCU_LCD_SEG38 (1U << MCU_LCD_SEG38_SHIFT)
-#define MCU_LCD_SEG0_SHIFT 0
-#define MCU_LCD_SEG1_SHIFT 1
-#define MCU_LCD_SEG2_SHIFT 2
-#define MCU_LCD_SEG3_SHIFT 3
-#define MCU_LCD_SEG4_SHIFT 4
-#define MCU_LCD_SEG5_SHIFT 5
-#define MCU_LCD_SEG6_SHIFT 6
-#define MCU_LCD_SEG7_SHIFT 7
-#define MCU_LCD_SEG8_SHIFT 8
-#define MCU_LCD_SEG9_SHIFT 9
-#define MCU_LCD_SEG10_SHIFT 10
-#define MCU_LCD_SEG11_SHIFT 11
-#define MCU_LCD_SEG12_SHIFT 12
-#define MCU_LCD_SEG13_SHIFT 13
-#define MCU_LCD_SEG14_SHIFT 14
-#define MCU_LCD_SEG15_SHIFT 15
-#define MCU_LCD_SEG16_SHIFT 16
-#define MCU_LCD_SEG17_SHIFT 17
-#define MCU_LCD_SEG18_SHIFT 18
-#define MCU_LCD_SEG19_SHIFT 19
-#define MCU_LCD_SEG20_SHIFT 20
-#define MCU_LCD_SEG21_SHIFT 21
-#define MCU_LCD_SEG22_SHIFT 22
-#define MCU_LCD_SEG23_SHIFT 23
-#define MCU_LCD_SEG24_SHIFT 24
-#define MCU_LCD_SEG25_SHIFT 25
-#define MCU_LCD_SEG26_SHIFT 26
-#define MCU_LCD_SEG27_SHIFT 27
-#define MCU_LCD_SEG28_SHIFT 28
-#define MCU_LCD_SEG29_SHIFT 29
-#define MCU_LCD_SEG30_SHIFT 30
-#define MCU_LCD_SEG31_SHIFT 31
-#define MCU_LCD_SEG32_SHIFT 0
-#define MCU_LCD_SEG33_SHIFT 1
-#define MCU_LCD_SEG34_SHIFT 2
-#define MCU_LCD_SEG35_SHIFT 3
-#define MCU_LCD_SEG36_SHIFT 4
-#define MCU_LCD_SEG37_SHIFT 5
-#define MCU_LCD_SEG38_SHIFT 6
-#define MCU_LCD_SEG39_SHIFT 7
-#define MCU_LCD_SEG40_SHIFT 8
-#define MCU_LCD_SEG41_SHIFT 9
-#define MCU_LCD_SEG42_SHIFT 10
-#define MCU_LCD_SEG43_SHIFT 11
-
-/**
- * @brief LCD Pins definition.
- */
-#if defined (USE_STM32L476G_DISCO_REVC) || defined (USE_STM32L476G_DISCO_REVB)
-#define LCD_GPIO_BANKA_PINS (GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_8 | \
- GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_15)
-#define LCD_GPIO_BANKB_PINS (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_4 | \
- GPIO_PIN_5 | GPIO_PIN_9 | GPIO_PIN_12 | \
- GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15)
-#define LCD_GPIO_BANKC_PINS (GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | \
- GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_8)
-#define LCD_GPIO_BANKD_PINS (GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | \
- GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | \
- GPIO_PIN_14 | GPIO_PIN_15)
-#elif defined (USE_STM32L476G_DISCO_REVA)
-#define LCD_GPIO_BANKA_PINS (GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_15)
-#define LCD_GPIO_BANKB_PINS (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_4 | \
- GPIO_PIN_5 | GPIO_PIN_12 | GPIO_PIN_13 | \
- GPIO_PIN_14 | GPIO_PIN_15)
-#define LCD_GPIO_BANKC_PINS (GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | \
- GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_8 | \
- GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12)
-#define LCD_GPIO_BANKD_PINS (GPIO_PIN_2 | GPIO_PIN_8 | GPIO_PIN_9 | \
- GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | \
- GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15)
-#endif
-
-/* Define for scrolling sentences*/
-#define SCROLL_SPEED_HIGH 150
-#define SCROLL_SPEED_MEDIUM 300
-#define SCROLL_SPEED_LOW 450
-
-#define DOT ((uint16_t) 0x8000 ) /* for add decimal point in string */
-#define DOUBLE_DOT ((uint16_t) 0x4000) /* for add decimal point in string */
-
-/* code for '(' character */
-#define C_OPENPARMAP ((uint16_t) 0x0028)
-
-/* code for ')' character */
-#define C_CLOSEPARMAP ((uint16_t) 0x0011)
-
-/* code for 'd' character */
-#define C_DMAP ((uint16_t) 0xf300)
-
-/* code for 'm' character */
-#define C_MMAP ((uint16_t) 0xb210)
-
-/* code for 'n' character */
-#define C_NMAP ((uint16_t) 0x2210)
-
-/* code for 'µ' character */
-#define C_UMAP ((uint16_t) 0x6084)
-
-/* constant code for '*' character */
-#define C_STAR ((uint16_t) 0xA0DD)
-
-/* constant code for '-' character */
-#define C_MINUS ((uint16_t) 0xA000)
-
-/* constant code for '+' character */
-#define C_PLUS ((uint16_t) 0xA014)
-
-/* constant code for '/' */
-#define C_SLATCH ((uint16_t) 0x00c0)
-
-/* constant code for ° */
-#define C_PERCENT_1 ((uint16_t) 0xec00)
-
-/* constant code for small o */
-#define C_PERCENT_2 ((uint16_t) 0xb300)
-
-#define C_FULL ((uint16_t) 0xffdd)
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup STM32L476G_DISCOVERY_LCD_Exported_Functions Exported Functions
- * @{
- */
-void BSP_LCD_GLASS_Init(void);
-void BSP_LCD_GLASS_DeInit(void);
-void BSP_LCD_GLASS_BlinkConfig(uint32_t BlinkMode, uint32_t BlinkFrequency);
-void BSP_LCD_GLASS_Contrast(uint32_t Contrast);
-void BSP_LCD_GLASS_DisplayChar(uint8_t* ch, Point_Typedef Point, DoublePoint_Typedef Column, DigitPosition_Typedef Position);
-void BSP_LCD_GLASS_DisplayString(uint8_t* ptr);
-void BSP_LCD_GLASS_DisplayStrDeci(uint16_t* ptr);
-void BSP_LCD_GLASS_ScrollSentence(uint8_t* ptr, uint16_t nScroll, uint16_t ScrollSpeed);
-void BSP_LCD_GLASS_DisplayBar(uint32_t BarId);
-void BSP_LCD_GLASS_ClearBar(uint32_t BarId);
-void BSP_LCD_GLASS_BarLevelConfig(uint8_t BarLevel);
-void BSP_LCD_GLASS_Clear(void);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L476G_DISCOVERY_GLASS_LCD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l476g_discovery_qspi.h
--- a/stm32l476g_discovery_qspi.h Thu Dec 03 22:16:32 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,135 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l476g_discovery_qspi.h
- * @author MCD Application Team
- * @version V1.0.1
- * @date 16-September-2015
- * @brief This file contains the common defines and functions prototypes for
- * the stm32l476g_discovery_qspi.c driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L476G_DISCOVERY_QSPI_H
-#define __STM32L476G_DISCOVERY_QSPI_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l4xx_hal.h"
-#include "n25q128a.h"
-
-/** @addtogroup BSP
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY
- * @{
- */
-
-/** @addtogroup STM32L476G_DISCOVERY_QSPI
- * @{
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_QSPI_Exported_Constants Exported Constants
- * @{
- */
-/* QSPI Error codes */
-#define QSPI_OK ((uint8_t)0x00)
-#define QSPI_ERROR ((uint8_t)0x01)
-#define QSPI_BUSY ((uint8_t)0x02)
-#define QSPI_NOT_SUPPORTED ((uint8_t)0x04)
-#define QSPI_SUSPENDED ((uint8_t)0x08)
-
-/**
- * @}
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_QSPI_Exported_Types Exported Types
- * @{
- */
-/* QSPI Info */
-typedef struct {
- uint32_t FlashSize; /*!< Size of the flash */
- uint32_t EraseSectorSize; /*!< Size of sectors for the erase operation */
- uint32_t EraseSectorsNumber; /*!< Number of sectors for the erase operation */
- uint32_t ProgPageSize; /*!< Size of pages for the program operation */
- uint32_t ProgPagesNumber; /*!< Number of pages for the program operation */
-} QSPI_Info;
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup STM32L476G_DISCOVERY_QSPI_Exported_Functions Exported Functions
- * @{
- */
-uint8_t BSP_QSPI_Init (void);
-uint8_t BSP_QSPI_DeInit (void);
-uint8_t BSP_QSPI_Read (uint8_t* pData, uint32_t ReadAddr, uint32_t Size);
-uint8_t BSP_QSPI_Write (uint8_t* pData, uint32_t WriteAddr, uint32_t Size);
-uint8_t BSP_QSPI_Erase_Block (uint32_t BlockAddress);
-uint8_t BSP_QSPI_Erase_Sector(uint32_t Sector);
-uint8_t BSP_QSPI_Erase_Chip (void);
-uint8_t BSP_QSPI_GetStatus (void);
-uint8_t BSP_QSPI_GetInfo (QSPI_Info* pInfo);
-uint8_t BSP_QSPI_EnableMemoryMappedMode(void);
-uint8_t BSP_QSPI_SuspendErase(void);
-uint8_t BSP_QSPI_ResumeErase (void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L476G_DISCOVERY_QSPI_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l4xx_nucleo.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32l4xx_nucleo.c Sat Dec 05 16:17:25 2015 +0000
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_nucleo.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 16-September-2015
+ * @brief This file provides set of firmware functions to manage:
+ * - LEDs and push-button available on STM32L4XX-Nucleo Kit
+ * from STMicroelectronics
+ * - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD
+ * shield (reference ID 802)
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_nucleo.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @defgroup STM32L4XX_NUCLEO STM32L476RG-Nucleo
+ * @brief This file provides set of firmware functions to manage Leds and push-button
+ * available on STM32L4XX-Nucleo Kit from STMicroelectronics.
+ * It provides also LCD, joystick and uSD functions to communicate with
+ * Adafruit 1.8" TFT LCD shield (reference ID 802)
+ * @{
+ */
+
+
+/** @defgroup STM32L4XX_NUCLEO_Private_Defines Private Defines
+ * @{
+ */
+
+/**
+ * @brief STM32L476RG NUCLEO BSP Driver version V2.0.0
+ */
+#define __STM32L4XX_NUCLEO_BSP_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32L4XX_NUCLEO_BSP_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32L4XX_NUCLEO_BSP_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32L4XX_NUCLEO_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32L4XX_NUCLEO_BSP_VERSION ((__STM32L4XX_NUCLEO_BSP_VERSION_MAIN << 24)\
+ |(__STM32L4XX_NUCLEO_BSP_VERSION_SUB1 << 16)\
+ |(__STM32L4XX_NUCLEO_BSP_VERSION_SUB2 << 8 )\
+ |(__STM32L4XX_NUCLEO_BSP_VERSION_RC))
+
+/**
+ * @brief LINK SD Card
+ */
+#define SD_DUMMY_BYTE 0xFF
+#define SD_NO_RESPONSE_EXPECTED 0x80
+
+/**
+ * @}
+ */
+
+
+/** @defgroup STM32L4XX_NUCLEO_Private_Variables Exported Variables
+ * @{
+ */
+GPIO_TypeDef* GPIO_PORT[LEDn] = {LED2_GPIO_PORT};
+
+const uint16_t GPIO_PIN[LEDn] = {LED2_PIN};
+
+GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {USER_BUTTON_GPIO_PORT};
+const uint16_t BUTTON_PIN[BUTTONn] = {USER_BUTTON_PIN};
+const uint16_t BUTTON_IRQn[BUTTONn] = {USER_BUTTON_EXTI_IRQn};
+
+/**
+ * @brief BUS variables
+ */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+uint32_t hnucleo_SpixTimeout = NUCLEO_SPIx_TIMEOUT_MAX; /*<! Value of Timeout when SPI communication fails */
+static SPI_HandleTypeDef hnucleo_Spi;
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+static ADC_HandleTypeDef hnucleo_Adc;
+/* ADC channel configuration structure declaration */
+static ADC_ChannelConfTypeDef hnucleo_AdcChannelConfig;
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32L4XX_NUCLEO_Private_Functions Private Functions
+ * @{
+ */
+#ifdef HAL_SPI_MODULE_ENABLED
+static void SPIx_Init(void);
+static void SPIx_Write(uint8_t Value);
+static void SPIx_Error (void);
+static void SPIx_MspInit(void);
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+static HAL_StatusTypeDef ADCx_Init(void);
+static void ADCx_MspInit(ADC_HandleTypeDef *hadc);
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+/* SD IO functions */
+void SD_IO_Init(void);
+void SD_IO_CSState(uint8_t state);
+void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
+uint8_t SD_IO_WriteByte(uint8_t Data);
+
+/* LCD IO functions */
+void LCD_IO_Init(void);
+void LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size);
+void LCD_IO_WriteReg(uint8_t LCDReg);
+void LCD_Delay(uint32_t delay);
+#endif /* HAL_SPI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/** @defgroup STM32L4XX_NUCLEO_Exported_Functions Exported Functions
+ * @{
+ */
+
+/**
+ * @brief This method returns the STM32L4XX NUCLEO BSP Driver revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t BSP_GetVersion(void)
+{
+ return __STM32L4XX_NUCLEO_BSP_VERSION;
+}
+
+/** @defgroup STM32L4XX_NUCLEO_LED_Functions LED Functions
+ * @{
+ */
+
+/**
+ * @brief Configures LED GPIO.
+ * @param Led: LED to be configured.
+ * This parameter can be one of the following values:
+ * @arg LED2
+ * @retval None
+ */
+void BSP_LED_Init(Led_TypeDef Led)
+{
+ GPIO_InitTypeDef gpioinitstruct = {0};
+
+ /* Enable the GPIO_LED Clock */
+ LEDx_GPIO_CLK_ENABLE(Led);
+
+ /* Configure the GPIO_LED pin */
+ gpioinitstruct.Pin = GPIO_PIN[Led];
+ gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP;
+ gpioinitstruct.Pull = GPIO_NOPULL;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(GPIO_PORT[Led], &gpioinitstruct);
+}
+
+/**
+ * @brief Turns selected LED On.
+ * @param Led: Specifies the Led to be set on.
+ * This parameter can be one of following parameters:
+ * @arg LED2
+ * @retval None
+ */
+void BSP_LED_On(Led_TypeDef Led)
+{
+ HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET);
+}
+
+/**
+ * @brief Turns selected LED Off.
+ * @param Led: Specifies the Led to be set off.
+ * This parameter can be one of following parameters:
+ * @arg LED2
+ * @retval None
+ */
+void BSP_LED_Off(Led_TypeDef Led)
+{
+ HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_RESET);
+}
+
+/**
+ * @brief Toggles the selected LED.
+ * @param Led: Specifies the Led to be toggled.
+ * This parameter can be one of following parameters:
+ * @arg LED2
+ * @retval None
+ */
+void BSP_LED_Toggle(Led_TypeDef Led)
+{
+ HAL_GPIO_TogglePin(GPIO_PORT[Led], GPIO_PIN[Led]);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32L4XX_NUCLEO_BUTTON_Functions BUTTON Functions
+ * @{
+ */
+
+/**
+ * @brief Configures Button GPIO and EXTI Line.
+ * @param Button: Specifies the Button to be configured.
+ * This parameter should be: BUTTON_USER
+ * @param ButtonMode: Specifies Button mode.
+ * This parameter can be one of following parameters:
+ * @arg BUTTON_MODE_GPIO: Button will be used as simple IO
+ * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
+ * generation capability
+ * @retval None
+ */
+void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
+{
+ GPIO_InitTypeDef gpioinitstruct = {0};
+
+ /* Enable the BUTTON Clock */
+ BUTTONx_GPIO_CLK_ENABLE(Button);
+
+ if (ButtonMode == BUTTON_MODE_GPIO) {
+ /* Configure Button pin as input */
+ gpioinitstruct.Pin = BUTTON_PIN[Button];
+ gpioinitstruct.Mode = GPIO_MODE_INPUT;
+ gpioinitstruct.Pull = GPIO_NOPULL;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH;
+
+ HAL_GPIO_Init(BUTTON_PORT[Button], &gpioinitstruct);
+ } else if(ButtonMode == BUTTON_MODE_EXTI) {
+ /* Configure Button pin as input with External interrupt */
+ gpioinitstruct.Pin = BUTTON_PIN[Button];
+ gpioinitstruct.Mode = GPIO_MODE_IT_FALLING;
+ gpioinitstruct.Pull = GPIO_NOPULL;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(BUTTON_PORT[Button], &gpioinitstruct);
+
+ /* Enable and set Button EXTI Interrupt to the lowest priority */
+ HAL_NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F, 0);
+ HAL_NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
+ }
+}
+
+/**
+ * @brief Returns the selected Button state.
+ * @param Button: Specifies the Button to be checked.
+ * This parameter should be: BUTTON_USER
+ * @retval Button state.
+ */
+uint32_t BSP_PB_GetState(Button_TypeDef Button)
+{
+ return HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
+}
+
+#ifdef HAL_ADC_MODULE_ENABLED
+/**
+ * @brief Configures joystick available on adafruit 1.8" TFT shield
+ * managed through ADC to detect motion.
+ * @retval Joystickstatus (0=> success, 1=> fail)
+ */
+uint8_t BSP_JOY_Init(void)
+{
+ if (ADCx_Init() != HAL_OK) {
+ return (uint8_t) HAL_ERROR;
+ }
+
+ /* Select Channel 15 to be converted */
+ hnucleo_AdcChannelConfig.Channel = ADC_CHANNEL_15;
+ hnucleo_AdcChannelConfig.SamplingTime = ADC_SAMPLETIME_24CYCLES_5;
+ hnucleo_AdcChannelConfig.Rank = 1;
+ hnucleo_AdcChannelConfig.SingleDiff = ADC_SINGLE_ENDED;
+ hnucleo_AdcChannelConfig.OffsetNumber = ADC_OFFSET_NONE;
+
+ /* Return Joystick initialization status */
+ return (uint8_t) HAL_ADC_ConfigChannel(&hnucleo_Adc, &hnucleo_AdcChannelConfig);
+}
+
+/**
+ * @brief Returns the Joystick key pressed.
+ * @note To know which Joystick key is pressed we need to detect the voltage
+ * level on each key output
+ * - None : 3.3 V / 4095
+ * - SEL : 1.055 V / 1308
+ * - DOWN : 0.71 V / 88
+ * - LEFT : 3.0 V / 3720
+ * - RIGHT : 0.595 V / 737
+ * - UP : 1.65 V / 2046
+ * @retval JOYState_TypeDef: Code of the Joystick key pressed.
+ */
+JOYState_TypeDef BSP_JOY_GetState(void)
+{
+ JOYState_TypeDef state = JOY_NONE;
+ uint16_t keyconvertedvalue = 0;
+
+ /* Start the conversion process */
+ HAL_ADC_Start(&hnucleo_Adc);
+
+ /* Wait for the end of conversion */
+ HAL_ADC_PollForConversion(&hnucleo_Adc, 10);
+
+ /* Check if the continous conversion of regular channel is finished */
+ if(HAL_ADC_GetState(&hnucleo_Adc) & HAL_ADC_STATE_REG_EOC) {
+ /* Get the converted value of regular channel */
+ keyconvertedvalue = HAL_ADC_GetValue(&hnucleo_Adc);
+ }
+
+ if((keyconvertedvalue > 1980) && (keyconvertedvalue < 2120)) {
+ state = JOY_UP;
+ } else if((keyconvertedvalue > 630) && (keyconvertedvalue < 830)) {
+ state = JOY_RIGHT;
+ } else if((keyconvertedvalue > 1210) && (keyconvertedvalue < 1410)) {
+ state = JOY_SEL;
+ } else if((keyconvertedvalue > 20) && (keyconvertedvalue < 160)) {
+ state = JOY_DOWN;
+ } else if((keyconvertedvalue > 3620) && (keyconvertedvalue < 3820)) {
+ state = JOY_LEFT;
+ } else {
+ state = JOY_NONE;
+ }
+
+ /* Return the code of the Joystick key pressed*/
+ return state;
+}
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4XX_NUCLEO_Private_Functions
+ * @{
+ */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+/******************************************************************************
+ BUS OPERATIONS
+*******************************************************************************/
+/**
+ * @brief Initialize SPI MSP.
+ * @retval None
+ */
+static void SPIx_MspInit(void)
+{
+ GPIO_InitTypeDef gpioinitstruct = {0};
+
+ /*** Configure the GPIOs ***/
+ /* Enable GPIO clock */
+ NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE();
+ NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE();
+
+ /* Configure SPI SCK */
+ gpioinitstruct.Pin = NUCLEO_SPIx_SCK_PIN;
+ gpioinitstruct.Mode = GPIO_MODE_AF_PP;
+ gpioinitstruct.Pull = GPIO_PULLUP;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ gpioinitstruct.Alternate = NUCLEO_SPIx_SCK_AF;
+ HAL_GPIO_Init(NUCLEO_SPIx_SCK_GPIO_PORT, &gpioinitstruct);
+
+ /* Configure SPI MISO and MOSI */
+ gpioinitstruct.Pin = NUCLEO_SPIx_MOSI_PIN;
+ gpioinitstruct.Alternate = NUCLEO_SPIx_MISO_MOSI_AF;
+ gpioinitstruct.Pull = GPIO_PULLDOWN;
+ HAL_GPIO_Init(NUCLEO_SPIx_MISO_MOSI_GPIO_PORT, &gpioinitstruct);
+
+ gpioinitstruct.Pin = NUCLEO_SPIx_MISO_PIN;
+ HAL_GPIO_Init(NUCLEO_SPIx_MISO_MOSI_GPIO_PORT, &gpioinitstruct);
+
+ /*** Configure the SPI peripheral ***/
+ /* Enable SPI clock */
+ NUCLEO_SPIx_CLK_ENABLE();
+}
+
+/**
+ * @brief Initialize SPI HAL.
+ * @retval None
+ */
+static void SPIx_Init(void)
+{
+ if(HAL_SPI_GetState(&hnucleo_Spi) == HAL_SPI_STATE_RESET) {
+ /* SPI Config */
+ hnucleo_Spi.Instance = NUCLEO_SPIx;
+ /* SPI baudrate is set to 8 MHz maximum (PCLK2/SPI_BaudRatePrescaler = 32/4 = 8 MHz)
+ to verify these constraints:
+ - ST7735 LCD SPI interface max baudrate is 15MHz for write and 6.66MHz for read
+ Since the provided driver doesn't use read capability from LCD, only constraint
+ on write baudrate is considered.
+ - SD card SPI interface max baudrate is 25MHz for write/read
+ - PCLK2 max frequency is 32 MHz
+ */
+ hnucleo_Spi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
+ hnucleo_Spi.Init.Direction = SPI_DIRECTION_2LINES;
+ hnucleo_Spi.Init.CLKPhase = SPI_PHASE_2EDGE;
+ hnucleo_Spi.Init.CLKPolarity = SPI_POLARITY_HIGH;
+ hnucleo_Spi.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hnucleo_Spi.Init.CRCPolynomial = 7;
+ hnucleo_Spi.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+ hnucleo_Spi.Init.DataSize = SPI_DATASIZE_8BIT;
+ hnucleo_Spi.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hnucleo_Spi.Init.NSS = SPI_NSS_SOFT;
+ hnucleo_Spi.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
+ hnucleo_Spi.Init.TIMode = SPI_TIMODE_DISABLE;
+ hnucleo_Spi.Init.Mode = SPI_MODE_MASTER;
+
+ SPIx_MspInit();
+ HAL_SPI_Init(&hnucleo_Spi);
+ }
+}
+
+/**
+ * @brief SPI Write byte(s) to device
+ * @param DataIn: Pointer to data buffer to write
+ * @param DataOut: Pointer to data buffer for read data
+ * @param DataLength: number of bytes to write
+ * @retval None
+ */
+static void SPIx_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ status = HAL_SPI_TransmitReceive(&hnucleo_Spi, (uint8_t*) DataIn, DataOut, DataLength, hnucleo_SpixTimeout);
+
+ /* Check the communication status */
+ if(status != HAL_OK) {
+ /* Execute user timeout callback */
+ SPIx_Error();
+ }
+}
+
+/**
+ * @brief SPI Write a byte to device
+ * @param Value: value to be written
+ * @retval None
+ */
+static void SPIx_Write(uint8_t Value)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint8_t data;
+
+ status = HAL_SPI_TransmitReceive(&hnucleo_Spi, (uint8_t*) &Value, &data, 1, hnucleo_SpixTimeout);
+
+ /* Check the communication status */
+ if(status != HAL_OK) {
+ /* Execute user timeout callback */
+ SPIx_Error();
+ }
+}
+
+/**
+ * @brief SPI error treatment function
+ * @retval None
+ */
+static void SPIx_Error (void)
+{
+ /* De-initialize the SPI communication BUS */
+ HAL_SPI_DeInit(&hnucleo_Spi);
+
+ /* Re-Initiaize the SPI communication BUS */
+ SPIx_Init();
+}
+
+/******************************************************************************
+ LINK OPERATIONS
+*******************************************************************************/
+
+/********************************* LINK SD ************************************/
+/**
+ * @brief Initialize the SD Card and put it into StandBy State (Ready for
+ * data transfer).
+ * @retval None
+ */
+void SD_IO_Init(void)
+{
+ GPIO_InitTypeDef gpioinitstruct = {0};
+ uint8_t counter = 0;
+
+ /* SD_CS_GPIO Periph clock enable */
+ SD_CS_GPIO_CLK_ENABLE();
+
+ /* Configure SD_CS_PIN pin: SD Card CS pin */
+ gpioinitstruct.Pin = SD_CS_PIN;
+ gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP;
+ gpioinitstruct.Pull = GPIO_PULLUP;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct);
+
+ /* Configure LCD_CS_PIN pin: LCD Card CS pin */
+ gpioinitstruct.Pin = LCD_CS_PIN;
+ gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP;
+ gpioinitstruct.Pull = GPIO_NOPULL;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct);
+ LCD_CS_HIGH();
+
+ /*------------Put SD in SPI mode--------------*/
+ /* SD SPI Config */
+ SPIx_Init();
+
+ /* SD chip select high */
+ SD_CS_HIGH();
+
+ /* Send dummy byte 0xFF, 10 times with CS high */
+ /* Rise CS and MOSI for 80 clocks cycles */
+ for (counter = 0; counter <= 9; counter++) {
+ /* Send dummy byte 0xFF */
+ SD_IO_WriteByte(SD_DUMMY_BYTE);
+ }
+}
+
+/**
+ * @brief Set SD interface Chip Select state
+ * @param val: 0 (low) or 1 (high) state
+ * @retval None
+ */
+void SD_IO_CSState(uint8_t val)
+{
+ if(val == 1) {
+ SD_CS_HIGH();
+ } else {
+ SD_CS_LOW();
+ }
+}
+
+/**
+ * @brief Write byte(s) on the SD
+ * @param DataIn: Pointer to data buffer to write
+ * @param DataOut: Pointer to data buffer for read data
+ * @param DataLength: number of bytes to write
+ * @retval None
+ */
+void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength)
+{
+ /* Send the byte */
+ SPIx_WriteReadData(DataIn, DataOut, DataLength);
+}
+
+/**
+ * @brief Write a byte on the SD.
+ * @param Data: byte to send.
+ * @retval Data written
+ */
+uint8_t SD_IO_WriteByte(uint8_t Data)
+{
+ uint8_t tmp;
+
+ /* Send the byte */
+ SPIx_WriteReadData(&Data,&tmp,1);
+ return tmp;
+}
+
+/********************************* LINK LCD ***********************************/
+/**
+ * @brief Initialize the LCD
+ * @retval None
+ */
+void LCD_IO_Init(void)
+{
+ GPIO_InitTypeDef gpioinitstruct = {0};
+
+ /* LCD_CS_GPIO and LCD_DC_GPIO Periph clock enable */
+ LCD_CS_GPIO_CLK_ENABLE();
+ LCD_DC_GPIO_CLK_ENABLE();
+
+ /* Configure LCD_CS_PIN pin: LCD Card CS pin */
+ gpioinitstruct.Pin = LCD_CS_PIN;
+ gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP;
+ gpioinitstruct.Pull = GPIO_NOPULL;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct);
+
+ /* Configure LCD_DC_PIN pin: LCD Card DC pin */
+ gpioinitstruct.Pin = LCD_DC_PIN;
+ HAL_GPIO_Init(LCD_DC_GPIO_PORT, &gpioinitstruct);
+
+ /* LCD chip select high */
+ LCD_CS_HIGH();
+
+ /* LCD SPI Config */
+ SPIx_Init();
+}
+
+/**
+ * @brief Write command to select the LCD register.
+ * @param LCDReg: Address of the selected register.
+ * @retval None
+ */
+void LCD_IO_WriteReg(uint8_t LCDReg)
+{
+ /* Reset LCD control line CS */
+ LCD_CS_LOW();
+
+ /* Set LCD data/command line DC to Low */
+ LCD_DC_LOW();
+
+ /* Send Command */
+ SPIx_Write(LCDReg);
+
+ /* Deselect : Chip Select high */
+ LCD_CS_HIGH();
+}
+
+/**
+* @brief Write register value.
+* @param pData Pointer on the register value
+* @param Size Size of byte to transmit to the register
+* @retval None
+*/
+void LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size)
+{
+ uint32_t counter = 0;
+ __IO uint32_t data = 0;
+
+ /* Reset LCD control line CS */
+ LCD_CS_LOW();
+
+ /* Set LCD data/command line DC to High */
+ LCD_DC_HIGH();
+
+ if (Size == 1) {
+ /* Only 1 byte to be sent to LCD - general interface can be used */
+ /* Send Data */
+ SPIx_Write(*pData);
+ } else {
+ /* Several data should be sent in a raw */
+ /* Direct SPI accesses for optimization */
+ for (counter = Size; counter != 0; counter--) {
+ while(((hnucleo_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE) {
+ }
+ /* Need to invert bytes for LCD*/
+ *((__IO uint8_t*)&hnucleo_Spi.Instance->DR) = *(pData+1);
+
+ while(((hnucleo_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE) {
+ }
+ *((__IO uint8_t*)&hnucleo_Spi.Instance->DR) = *pData;
+ counter--;
+ pData += 2;
+ }
+
+ /* Wait until the bus is ready before releasing Chip select */
+ while(((hnucleo_Spi.Instance->SR) & SPI_FLAG_BSY) != RESET) {
+ }
+ }
+
+ /* Empty the Rx fifo */
+ data = *(&hnucleo_Spi.Instance->DR);
+ UNUSED(data); /* Remove GNU warning */
+
+ /* Deselect : Chip Select high */
+ LCD_CS_HIGH();
+}
+
+/**
+ * @brief Wait for loop in ms.
+ * @param Delay in ms.
+ * @retval None
+ */
+void LCD_Delay(uint32_t Delay)
+{
+ HAL_Delay(Delay);
+}
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+/******************************* LINK JOYSTICK ********************************/
+/**
+ * @brief Initialize ADC MSP.
+ * @retval None
+ */
+static void ADCx_MspInit(ADC_HandleTypeDef *hadc)
+{
+ GPIO_InitTypeDef gpioinitstruct = {0};
+ RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct;
+
+ /*** Configure the GPIOs ***/
+ /* Enable GPIO clock */
+ NUCLEO_ADCx_GPIO_CLK_ENABLE();
+
+ /* Configure ADC1 Channel8 as analog input */
+ gpioinitstruct.Pin = NUCLEO_ADCx_GPIO_PIN ;
+ gpioinitstruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
+ gpioinitstruct.Pull = GPIO_NOPULL;
+ gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(NUCLEO_ADCx_GPIO_PORT, &gpioinitstruct);
+
+ /*** Configure the ADC peripheral ***/
+ /* Enable ADC clock */
+ NUCLEO_ADCx_CLK_ENABLE();
+
+ /* Configure SYSCLK as source clock for ADC */
+ RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+ RCC_PeriphCLKInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK;
+ HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct);
+}
+
+/**
+ * @brief Initializes ADC HAL.
+ * @retval None
+ */
+static HAL_StatusTypeDef ADCx_Init(void)
+{
+ if(HAL_ADC_GetState(&hnucleo_Adc) == HAL_ADC_STATE_RESET) {
+ /* ADC Config */
+ hnucleo_Adc.Instance = NUCLEO_ADCx;
+ hnucleo_Adc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV8; /* (must not exceed 16MHz) */
+ hnucleo_Adc.Init.Resolution = ADC_RESOLUTION_12B;
+ hnucleo_Adc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ hnucleo_Adc.Init.ScanConvMode = DISABLE;
+ hnucleo_Adc.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+ hnucleo_Adc.Init.LowPowerAutoWait = ENABLE;
+ hnucleo_Adc.Init.ContinuousConvMode = DISABLE;
+ hnucleo_Adc.Init.NbrOfConversion = 1;
+ hnucleo_Adc.Init.DiscontinuousConvMode = DISABLE;
+ hnucleo_Adc.Init.NbrOfDiscConversion = 1;
+ hnucleo_Adc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ hnucleo_Adc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ hnucleo_Adc.Init.DMAContinuousRequests = DISABLE;
+ hnucleo_Adc.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+ hnucleo_Adc.Init.OversamplingMode = DISABLE;
+
+ ADCx_MspInit(&hnucleo_Adc);
+ if (HAL_ADC_Init(&hnucleo_Adc) != HAL_OK) {
+ return HAL_ERROR;
+ }
+
+ if (HAL_ADCEx_Calibration_Start(&hnucleo_Adc,ADC_SINGLE_ENDED) != HAL_OK) {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l4xx_nucleo.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32l4xx_nucleo.h Sat Dec 05 16:17:25 2015 +0000
@@ -0,0 +1,295 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_nucleo.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 16-September-2015
+ * @brief This file contains definitions for:
+ * - LEDs and push-button available on STM32L4XX-Nucleo Kit
+ * from STMicroelectronics
+ * - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD
+ * shield (reference ID 802)
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4XX_NUCLEO_H
+#define __STM32L4XX_NUCLEO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32L4XX_NUCLEO
+ * @{
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+
+/** @defgroup STM32L4XX_NUCLEO_Exported_Types Exported Types
+ * @{
+ */
+typedef enum
+{
+ LED2 = 0,
+ LED4 = 1, // disco
+ LED_GREEN = LED2
+} Led_TypeDef;
+
+typedef enum
+{
+ BUTTON_USER = 0,
+ /* Alias */
+ BUTTON_KEY = BUTTON_USER
+} Button_TypeDef;
+
+typedef enum
+{
+ BUTTON_MODE_GPIO = 0,
+ BUTTON_MODE_EXTI = 1
+} ButtonMode_TypeDef;
+
+typedef enum
+{
+ JOY_NONE = 0,
+ JOY_SEL = 1,
+ JOY_DOWN = 2,
+ JOY_LEFT = 3,
+ JOY_RIGHT = 4,
+ JOY_UP = 5
+} JOYState_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32L4XX_NUCLEO_Exported_Constants Exported Constants
+ * @{
+ */
+
+/**
+* @brief Define for STM32L4XX_NUCLEO board
+ */
+#if !defined (USE_STM32L4XX_NUCLEO)
+ #define USE_STM32L4XX_NUCLEO
+#endif
+
+/** @defgroup STM32L4XX_NUCLEO_LED LED Constants
+ * @{
+ */
+#define LEDn 1
+
+#define LED2_PIN GPIO_PIN_5
+#define LED2_GPIO_PORT GPIOA
+#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
+
+#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if((__LED__) == LED2) { LED2_GPIO_CLK_ENABLE(); } } while(0)
+
+#define LEDx_GPIO_CLK_DISABLE(__LED__) do { if((__LED__) == LED2) { LED2_GPIO_CLK_DISABLE(); } } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup STM32L4XX_NUCLEO_BUTTON BUTTON Constants
+ * @{
+ */
+#define BUTTONn 1
+
+/**
+ * @brief Key push-button
+ */
+#define USER_BUTTON_PIN GPIO_PIN_13
+#define USER_BUTTON_GPIO_PORT GPIOC
+#define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
+#define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
+#define USER_BUTTON_EXTI_LINE GPIO_PIN_13
+#define USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+/* Aliases */
+#define KEY_BUTTON_PIN USER_BUTTON_PIN
+#define KEY_BUTTON_GPIO_PORT USER_BUTTON_GPIO_PORT
+#define KEY_BUTTON_GPIO_CLK_ENABLE() USER_BUTTON_GPIO_CLK_ENABLE()
+#define KEY_BUTTON_GPIO_CLK_DISABLE() USER_BUTTON_GPIO_CLK_DISABLE()
+#define KEY_BUTTON_EXTI_LINE USER_BUTTON_EXTI_LINE
+#define KEY_BUTTON_EXTI_IRQn USER_BUTTON_EXTI_IRQn
+
+
+#define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) { USER_BUTTON_GPIO_CLK_ENABLE(); } } while(0)
+
+#define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) { USER_BUTTON_GPIO_CLK_DISABLE(); } } while(0)
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4XX_NUCLEO_BUS BUS Constants
+ * @{
+ */
+/*###################### SPI1 ###################################*/
+#define NUCLEO_SPIx SPI1
+#define NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
+
+#define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1
+#define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA
+#define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5
+#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
+
+#define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1
+#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA
+#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
+#define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6
+#define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7
+/* Maximum Timeout values for flags waiting loops. These timeouts are not based
+ on accurate values, they just guarantee that the application will not remain
+ stuck if the SPI communication is corrupted.
+ You may modify these timeout values depending on CPU frequency and application
+ conditions (interrupts routines ...). */
+#define NUCLEO_SPIx_TIMEOUT_MAX 1000
+
+
+/**
+ * @brief SD Control Lines management
+ */
+#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
+#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
+
+/**
+ * @brief LCD Control Lines management
+ */
+#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET)
+#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET)
+#define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET)
+#define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET)
+
+/**
+ * @brief SD Control Interface pins
+ */
+#define SD_CS_PIN GPIO_PIN_5
+#define SD_CS_GPIO_PORT GPIOB
+#define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+#define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
+
+/**
+ * @brief LCD Control Interface pins
+ */
+#define LCD_CS_PIN GPIO_PIN_6
+#define LCD_CS_GPIO_PORT GPIOB
+#define LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+#define LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
+
+/**
+ * @brief LCD Data/Command Interface pins
+ */
+#define LCD_DC_PIN GPIO_PIN_9
+#define LCD_DC_GPIO_PORT GPIOA
+#define LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
+
+/* Audio codec I2C address */
+#define AUDIO_I2C_ADDRESS ((uint16_t) 0x94) // disco
+
+/*##################### ADC1 ###################################*/
+/**
+ * @brief ADC Interface pins
+ * used to detect motion of Joystick available on Adafruit 1.8" TFT shield
+ */
+#define NUCLEO_ADCx ADC1
+#define NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC_CLK_ENABLE()
+
+#define NUCLEO_ADCx_GPIO_PORT GPIOB
+#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0
+#define NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+#define NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4XX_NUCLEO_Exported_Functions
+ * @{
+ */
+uint32_t BSP_GetVersion(void);
+
+/** @addtogroup STM32L4XX_NUCLEO_LED_Functions
+ * @{
+ */
+void BSP_LED_Init(Led_TypeDef Led);
+void BSP_LED_On(Led_TypeDef Led);
+void BSP_LED_Off(Led_TypeDef Led);
+void BSP_LED_Toggle(Led_TypeDef Led);
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4XX_NUCLEO_BUTTON_Functions
+ * @{
+ */
+void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
+uint32_t BSP_PB_GetState(Button_TypeDef Button);
+#ifdef HAL_ADC_MODULE_ENABLED
+uint8_t BSP_JOY_Init(void);
+JOYState_TypeDef BSP_JOY_GetState(void);
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4XX_NUCLEO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l4xx_nucleo_audio.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32l4xx_nucleo_audio.c Sat Dec 05 16:17:25 2015 +0000
@@ -0,0 +1,1422 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_nucleo_audio.c
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 16-September-2015
+ * @brief This file provides a set of functions needed to manage the
+ * Audio driver for the STM32L476G-Nucleo board.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*==============================================================================
+ User NOTES
+
+1. How To use this driver:
+--------------------------
+ + This driver supports STM32L4xx devices on STM32L476G-Nucleo (MB1184) Nucleo boards.
+ a) to play an audio file (all functions names start by BSP_AUDIO_OUT_xxx)
+ b) to record an audio file through MP34DT01TR, ST MEMS (all functions names start by BSP_AUDIO_IN_xxx)
+
+a) PLAY A FILE:
+==============
+ + Call the function BSP_AUDIO_OUT_Init(
+ OutputDevice: physical output mode (OUTPUT_DEVICE_SPEAKER,
+ OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH)
+ Volume : Initial volume to be set (0 is min (mute), 100 is max (100%)
+ AudioFreq : Audio frequency in Hz (8000, 16000, 22500, 32000...)
+ this parameter is relative to the audio file/stream type.
+ )
+ This function configures all the hardware required for the audio application (codec, I2C, SAI,
+ GPIOs, DMA and interrupt if needed). This function returns AUDIO_OK if configuration is OK.
+ If the returned value is different from AUDIO_OK or the function is stuck then the communication with
+ the audio codec has failed.
+ - OUTPUT_DEVICE_SPEAKER : only speaker will be set as output for the audio stream.
+ - OUTPUT_DEVICE_HEADPHONE: only headphones will be set as output for the audio stream.
+ - OUTPUT_DEVICE_BOTH : both Speaker and Headphone are used as outputs for the audio stream
+ at the same time.
+
+ + Call the function BSP_AUDIO_OUT_RegisterCallbacks to register user callbacks
+ required to manage audio data streaming towards the audio codec (ErrorCallback(),
+ HalfTransfer_CallBack() and TransferComplete_CallBack()).
+
+ + Call the function BSP_AUDIO_OUT_Play() to start audio playback (for the first time).
+ + Call the function BSP_AUDIO_OUT_Pause() to pause audio playabck
+ + Call the function BSP_AUDIO_OUT_Resume() to resume audio playback.
+ Note. After calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() should be called
+ for resume (it is not allowed to call BSP_AUDIO_OUT_Play() in this case).
+ Note. This function should be called only when the audio file is played or paused (not stopped).
+ + Call the function BSP_AUDIO_OUT_Stop() to stop audio playback.
+ + To modify the volume level, the sampling frequency, the device output mode,
+ the mute status or the audio configuration or the stop, use the functions: BSP_AUDIO_OUT_SetVolume(),
+ AUDIO_OUT_SetFrequency(), BSP_AUDIO_OUT_SetOutputMode(), BSP_AUDIO_OUT_SetMute()and
+ BSP_AUDIO_OUT_ChangeAudioConfig().
+
+Driver architecture:
+--------------------
+ + This driver provides the audio layer high level API: it consists in functions
+ exported in the stm32l4xx_nucleo_audio.h file (e.g. BSP_AUDIO_OUT_Init(),
+ BSP_AUDIO_OUT_Play(), ...).
+ + This driver also includes the Media Access Layer (MAL): it consists in
+ functions allowing to access setup the audio devices. These functions
+ are included as local functions into the stm32l4xx_nucleo_audio.c file
+ (e.g. AUDIO_SAIx_Init()).
+
+Known Limitations:
+------------------
+ 1- Communication with the audio codec (through I2C) may be corrupted if it is interrupted by some
+ user interrupt routines (in this case, interrupts could be disabled just before the start of
+ communication then re-enabled when it is over). Note that this communication is only done at
+ the configuration phase (BSP_AUDIO_OUT_Init() or BSP_AUDIO_OUT_Stop()) and when Volume control modification is
+ performed (BSP_AUDIO_OUT_SetVolume() or BSP_AUDIO_OUT_SetMute()or BSP_AUDIO_OUT_SetOutputMode()).
+ When the audio data is played, no communication is required with the audio codec.
+ 2- Parsing of audio file is not implemented (in order to determine audio file properties: Mono/Stereo, Data size,
+ File size, Audio Frequency, Audio Data header size ...). The configuration is fixed for the given audio file.
+ 3- Supports only 16-bits audio data size.
+
+b) RECORD A FILE:
+================
+ + Call the function BSP_AUDIO_IN_Init(
+ AudioFreq: Audio frequency in Hz (8000, 16000, 22500, 32000 ...)
+ )
+ This function configures all the hardware required for the audio application (DFSDM,
+ GPIOs, DMA and interrupt if needed). This function returns AUDIO_OK if the
+ configuration completes successfully.
+
+ + Call the function BSP_AUDIO_IN_RegisterCallbacks to register user callbacks
+ used to stream audio data toward the record buffer (ErrorCallback(),
+ HalfTransfer_CallBack() and TransferComplete_CallBack()).
+
+ + Call the function BSP_AUDIO_IN_Record(
+ pbuf Main buffer pointer for the recorded data storing
+ size Current size of the recorded buffer
+ )
+ to start recording from the microphone.
+
+ + Call the function AUDIO_IN_STOP() to stop recording
+==============================================================================*/
+
+/* Includes ------------------------------------------------------------------*/
+#include <string.h>
+#include "stm32l4xx_nucleo_audio.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32L476G_NUCLEO
+ * @{
+ */
+
+/** @defgroup STM32L476G_NUCLEO_AUDIO STM32L476G-NUCLEO AUDIO
+ * @brief This file includes the low layer driver for cs43l22 Audio Codec
+ * available on STM32L476G-Nucleo board(MB1184).
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Private_Types Private Types
+ * @{
+ */
+//typedef struct
+//{
+// AUDIO_DrvTypeDef * AudioDrv; /* Audio codec driver */
+// Audio_CallbackTypeDef CbError; /* pointer to the callback function invoked when ... */
+// Audio_CallbackTypeDef CbHalfTransfer; /* pointer to the callback function invoked when ... */
+// Audio_CallbackTypeDef CbTransferComplete; /* pointer to the callback function invoked when ... */
+//} AUDIO_OUT_TypeDef;
+
+typedef struct
+{
+ DFSDM_Channel_HandleTypeDef hDfsdmLeftChannel; /* DFSDM channel handle used for left channel */
+ DMA_HandleTypeDef hDmaDfsdmLeft; /* DMA handle used for DFSDM regular conversions on left channel */
+ int32_t * LeftRecBuff; /* Buffers for left samples */
+ uint32_t Frequency; /* Record Frequency */
+ uint32_t BitResolution; /* Record bit resolution */
+ uint32_t ChannelNbr; /* Record Channel Number */
+ uint16_t * pRecBuf; /* Pointer to record user buffer */
+ uint32_t RecSize; /* Size to record in mono, double size to record in stereo */
+ Audio_CallbackTypeDef CbError; /* pointer to the callback function invoked when a DMA transfer fails */
+ Audio_CallbackTypeDef CbHalfTransfer; /* pointer to the callback function invoked when half of the DMA transfer is completed */
+ Audio_CallbackTypeDef CbTransferComplete; /* pointer to the callback function invoked when the DMA transfer is completed */
+} AUDIO_IN_TypeDef;
+
+/**
+ * @}
+ */
+
+/* Private defines ------------------------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Private_Constants Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Private_Macros Private Macros
+ * @{
+ */
+/*### PLAY ###*/
+/* SCK(kHz) = SAI_CK_x/(SAIClockDivider*2*256) */
+#define SAIClockDivider(__FREQUENCY__) \
+ (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 12 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 2 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 6 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 1 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 3 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 0 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 2 : 1 \
+
+/*### RECORD ###*/
+#define DFSDMOverSampling(__FREQUENCY__) \
+ (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 256 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 256 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 128 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 128 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 64 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 64 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 32 : 16 \
+
+#define DFSDMClockDivider(__FREQUENCY__) \
+ (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 24 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 4 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 24 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 4 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 24 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 4 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 32 : 32 \
+
+#define DFSDMFilterOrder(__FREQUENCY__) \
+ (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? DFSDM_FILTER_SINC3_ORDER \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? DFSDM_FILTER_SINC3_ORDER \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? DFSDM_FILTER_SINC3_ORDER \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? DFSDM_FILTER_SINC3_ORDER \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? DFSDM_FILTER_SINC4_ORDER \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? DFSDM_FILTER_SINC4_ORDER \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? DFSDM_FILTER_SINC4_ORDER : DFSDM_FILTER_SINC5_ORDER \
+
+#define DFSDMRightBitShift(__FREQUENCY__) \
+ (__FREQUENCY__ == AUDIO_FREQUENCY_8K) ? 2 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_11K) ? 3 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_16K) ? 3 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_22K) ? 0 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_32K) ? 3 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_44K) ? 3 \
+ : (__FREQUENCY__ == AUDIO_FREQUENCY_48K) ? 7 : 0 \
+
+/* Saturate the record PCM sample */
+#define SaturaLH(N, L, H) (((N)<(L))?(L):(((N)>(H))?(H):(N)))
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Private_Variables Private Variables
+ * @{
+ */
+/* Audio output context information */
+//static AUDIO_OUT_TypeDef hAudioOut;
+
+/* Audio input context information */
+static AUDIO_IN_TypeDef hAudioIn;
+
+/* SAI DMA handle */
+static DMA_HandleTypeDef hDmaSai;
+/**
+ * @}
+ */
+
+/* Exported variables ---------------------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Exported_Variables Exported Variables
+ * @{
+ */
+/* SAIx handle */
+SAI_HandleTypeDef BSP_AUDIO_hSai;
+
+/* DFSDM filter handle */
+DFSDM_Filter_HandleTypeDef BSP_AUDIO_hDfsdmLeftFilter;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Private_Functions Private Functions
+ * @{
+ */
+//static void AUDIO_CODEC_Reset(void);
+//static uint8_t AUDIO_SAIx_Init(uint32_t AudioFreq);
+//static uint8_t AUDIO_SAIx_DeInit(void);
+static uint8_t AUDIO_DFSDMx_Init(uint32_t AudioFreq);
+static uint8_t AUDIO_DFSDMx_DeInit(void);
+static uint8_t AUDIO_SAIPLLConfig(uint32_t AudioFreq);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup STM32L476G_NUCLEO_AUDIO_Exported_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the audio codec related peripherals.
+ * @param OutputDevice: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
+ * or OUTPUT_DEVICE_BOTH.
+ * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max))
+ * @param AudioFreq: Audio frequency used to play the audio stream.ion.
+ * @retval BSP AUDIO status
+ * @note The SAI PLL input clock must be configure in the user application.
+ * The SAI PLL configuration done within this function assumes that
+ * the SAI PLL input clock runs at 8 MHz.
+ */
+//uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice,
+// uint8_t Volume,
+// uint32_t AudioFreq)
+//{
+// /* Initialize the audio output context */
+// hAudioOut.AudioDrv = &cs43l22_drv;
+// hAudioOut.CbError = (Audio_CallbackTypeDef)NULL;
+// hAudioOut.CbHalfTransfer = (Audio_CallbackTypeDef)NULL;
+// hAudioOut.CbTransferComplete = (Audio_CallbackTypeDef)NULL;
+//
+// /* Configure the SAI PLL according to the requested audio frequency */
+// if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* SAI data transfer preparation: prepare the Media to be used for the audio
+// transfer from memory to SAI peripheral. */
+// if (AUDIO_SAIx_Init(AudioFreq) != AUDIO_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Retieve audio codec identifier */
+// if (cs43l22_drv.ReadID(AUDIO_I2C_ADDRESS) != CS43L22_ID)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Reset the audio codec Registers */
+// AUDIO_CODEC_Reset();
+//
+// /* Initialize the audio codec internal registers */
+// if (hAudioOut.AudioDrv->Init(AUDIO_I2C_ADDRESS,
+// OutputDevice,
+// Volume,
+// AudioFreq) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Set the requested volume */
+// BSP_AUDIO_OUT_SetVolume(Volume);
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief De-Initializes audio codec related peripherals
+ * @retval BSP AUDIO status
+
+ */
+//uint8_t BSP_AUDIO_OUT_DeInit(void)
+//{
+// /* De-initializes the Audio Codec audio interface */
+// if (AUDIO_SAIx_DeInit() != AUDIO_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* DeInit Audio component interface */
+// hAudioOut.AudioDrv->DeInit();
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Starts playing audio stream from a data buffer for a determined size.
+ * @param pData: pointer on PCM samples buffer
+ * @param Size: Number of audio data BYTES.
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_Play(uint16_t* pData, uint32_t Size)
+//{
+// /* Initiate a DMA transfer of PCM samples towards the serial audio interface */
+// if (HAL_SAI_Transmit_DMA(&BSP_AUDIO_hSai, (uint8_t *)pData, DMA_MAX(Size))!= HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Call the audio Codec Play function */
+// if (hAudioOut.AudioDrv->Play(AUDIO_I2C_ADDRESS, pData, Size) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+// }
+
+/**
+ * @brief Sends n-Bytes on the SAI interface.
+ * @param pData: pointer on PCM samples buffer
+ * @param Size: number of data to be written
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size)
+//{
+// /* Initiate a DMA transfer of PCM samples towards the serial audio interface */
+// if (HAL_SAI_Transmit_DMA(&BSP_AUDIO_hSai, (uint8_t *)pData, Size)!= HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief This function Pauses the audio file stream. In case
+ * of using DMA, the DMA Pause feature is used.
+ * @note When calling BSP_AUDIO_OUT_Pause() function for pause, only
+ * BSP_AUDIO_OUT_Resume() function should be called for resume
+ * (use of BSP_AUDIO_OUT_Play() function for resume could lead
+ * to unexpected behavior).
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_Pause(void)
+//{
+// /* Call the Audio Codec Pause function */
+// if (hAudioOut.AudioDrv->Pause(AUDIO_I2C_ADDRESS) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Pause DMA transfer of PCM samples towards the serial audio interface */
+// if (HAL_SAI_DMAPause(&BSP_AUDIO_hSai)!= HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief This function Resumes the audio file stream.
+ * @note When calling BSP_AUDIO_OUT_Pause() function for pause, only
+ * BSP_AUDIO_OUT_Resume() function should be called for resume
+ * (use of BSP_AUDIO_OUT_Play() function for resume could lead to
+ * unexpected behavior).
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_Resume(void)
+//{
+// /* Call the Audio Codec Resume function */
+// if (hAudioOut.AudioDrv->Resume(AUDIO_I2C_ADDRESS) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Resume DMA transfer of PCM samples towards the serial audio interface */
+// if (HAL_SAI_DMAResume(&BSP_AUDIO_hSai)!= HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Stops audio playing and Power down the Audio Codec.
+ * @param Option: could be one of the following parameters
+ * - CODEC_PDWN_SW: for software power off (by writing registers).
+ * Then no need to reconfigure the Codec after power on.
+ * - CODEC_PDWN_HW: completely shut down the codec (physically).
+ * Then need to reconfigure the Codec after power on.
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option)
+//{
+// /* Call Audio Codec Stop function */
+// if (hAudioOut.AudioDrv->Stop(AUDIO_I2C_ADDRESS, Option) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// if(Option == CODEC_PDWN_HW)
+// {
+// /* Wait at least 100us */
+// HAL_Delay(1);
+// }
+//
+// /* Stop DMA transfer of PCM samples towards the serial audio interface */
+// if (HAL_SAI_DMAStop(&BSP_AUDIO_hSai)!= HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Controls the current audio volume level.
+ * @param Volume: Volume level to be set in percentage from 0% to 100% (0 for
+ * Mute and 100 for Max volume level).
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume)
+//{
+// /* Call the codec volume control function with converted volume value */
+// if (hAudioOut.AudioDrv->SetVolume(AUDIO_I2C_ADDRESS, Volume) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Enables or disables the MUTE mode by software
+ * @param Cmd: Could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to
+ * unmute the codec and restore previous volume level.
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd)
+//{
+// /* Call the Codec Mute function */
+// if (hAudioOut.AudioDrv->SetMute(AUDIO_I2C_ADDRESS, Cmd) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Switch dynamically (while audio file is being played) the output
+ * target (speaker or headphone).
+ * @param Output: The audio output target: OUTPUT_DEVICE_SPEAKER,
+ * OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output)
+//{
+// /* Call the Codec output device function */
+// if (hAudioOut.AudioDrv->SetOutputMode(AUDIO_I2C_ADDRESS, Output) != 0)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Updates the audio frequency.
+ * @param AudioFreq: Audio frequency used to play the audio stream.
+ * @note The SAI PLL input clock must be configure in the user application.
+ * The SAI PLL configuration done within this function assumes that
+ * the SAI PLL input clock runs at 8 MHz.
+ * @retval BSP AUDIO status
+ */
+//uint8_t BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq)
+//{
+// /* Configure the SAI PLL according to the requested audio frequency */
+// if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Disable SAI peripheral to allow access to SAI internal registers */
+// __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
+//
+// /* Update the SAI audio frequency configuration */
+// BSP_AUDIO_hSai.Init.Mckdiv = SAIClockDivider(AudioFreq);
+// HAL_SAI_Init(&BSP_AUDIO_hSai);
+//
+// /* Enable SAI peripheral to generate MCLK */
+// __HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief Changes the Audio Out Configuration.
+ * @param AudioOutOption: specifies the audio out new configuration
+ * This parameter can be any value of @ref BSP_Audio_Out_Option
+ * @note This API should be called after the BSP_AUDIO_OUT_Init() to adjust the
+ * audio out configuration.
+ * @retval None
+ */
+//void BSP_AUDIO_OUT_ChangeAudioConfig(uint32_t AudioOutOption)
+//{
+// /********** Playback Buffer circular/normal mode **********/
+// if(AudioOutOption & BSP_AUDIO_OUT_CIRCULARMODE)
+// {
+// /* Deinitialize the Stream to update DMA mode */
+// HAL_DMA_DeInit(BSP_AUDIO_hSai.hdmatx);
+//
+// /* Update the SAI audio Transfer DMA mode */
+// BSP_AUDIO_hSai.hdmatx->Init.Mode = DMA_CIRCULAR;
+//
+// /* Configure the DMA Stream with new Transfer DMA mode */
+// HAL_DMA_Init(BSP_AUDIO_hSai.hdmatx);
+// }
+// else /* BSP_AUDIO_OUT_NORMALMODE */
+// {
+// /* Deinitialize the Stream to update DMA mode */
+// HAL_DMA_DeInit(BSP_AUDIO_hSai.hdmatx);
+//
+// /* Update the SAI audio Transfer DMA mode */
+// BSP_AUDIO_hSai.hdmatx->Init.Mode = DMA_NORMAL;
+//
+// /* Configure the DMA Stream with new Transfer DMA mode */
+// HAL_DMA_Init(BSP_AUDIO_hSai.hdmatx);
+// }
+//
+// /********** Playback Buffer stereo/mono mode **********/
+// if(AudioOutOption & BSP_AUDIO_OUT_STEREOMODE)
+// {
+// /* Disable SAI peripheral to allow access to SAI internal registers */
+// __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
+//
+// /* Update the SAI audio frame slot configuration */
+// BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_STEREOMODE;
+// HAL_SAI_Init(&BSP_AUDIO_hSai);
+//
+// /* Enable SAI peripheral to generate MCLK */
+// __HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
+// }
+// else /* BSP_AUDIO_OUT_MONOMODE */
+// {
+// /* Disable SAI peripheral to allow access to SAI internal registers */
+// __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
+//
+// /* Update the SAI audio frame slot configuration */
+// BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_MONOMODE;
+// HAL_SAI_Init(&BSP_AUDIO_hSai);
+//
+// /* Enable SAI peripheral to generate MCLK */
+// __HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
+// }
+//}
+
+/**
+ * @brief register user callback functions
+ * @param ErrorCallback: pointer to the error callback function
+ * @param HalfTransferCallback: pointer to the half transfer callback function
+ * @param TransferCompleteCallback: pointer to the transfer complete callback function
+ * @retval None
+ */
+//void BSP_AUDIO_OUT_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
+// Audio_CallbackTypeDef HalfTransferCallback,
+// Audio_CallbackTypeDef TransferCompleteCallback)
+//{
+// hAudioOut.CbError = ErrorCallback;
+// hAudioOut.CbHalfTransfer = HalfTransferCallback;
+// hAudioOut.CbTransferComplete = TransferCompleteCallback;
+//}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+//void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
+//{
+// /* Invoke the registered 'TransferComplete' function (if any) */
+// if (hAudioOut.CbTransferComplete != (Audio_CallbackTypeDef)NULL)
+// {
+// hAudioOut.CbTransferComplete();
+// }
+//}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+//void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+//{
+// /* Invoke the registered 'HalfTransfer' callback function (if any) */
+// if (hAudioOut.CbHalfTransfer != (Audio_CallbackTypeDef)NULL)
+// {
+// hAudioOut.CbHalfTransfer();
+// }
+//}
+
+/**
+ * @brief SAI error callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+//void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
+//{
+// /* Invoke the registered 'ErrorCallback' callback function (if any) */
+// if (hAudioOut.CbError != (Audio_CallbackTypeDef)NULL)
+// {
+// hAudioOut.CbError();
+// }
+//}
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L476G_EVAL_AUDIO_Exported_Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes micropone related peripherals.
+ * @note This function assumes that the SAI input clock (through PLL_M)
+ * is already configured and ready to be used.
+ * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
+ * @param BitRes: Audio frequency to be configured for the SAI peripheral.
+ * @param ChnlNbr: Audio frequency to be configured for the SAI peripheral.
+ * @retval BSP AUDIO status
+ */
+uint8_t BSP_AUDIO_IN_Init(uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr)
+{
+ /* Update the audio input context */
+ hAudioIn.Frequency = AudioFreq;
+ hAudioIn.BitResolution = BitRes;
+ hAudioIn.ChannelNbr = ChnlNbr;
+ hAudioIn.CbError = (Audio_CallbackTypeDef)NULL;
+ hAudioIn.CbHalfTransfer = (Audio_CallbackTypeDef)NULL;
+ hAudioIn.CbTransferComplete = (Audio_CallbackTypeDef)NULL;
+
+ /* Configure the SAI PLL according to the requested audio frequency */
+ if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Initializes the Digital Filter for Sigma-Delta Modulators interface */
+ if(AUDIO_DFSDMx_Init(AudioFreq) != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+ }
+
+/**
+ * @brief De-Initializes microphone related peripherals.
+ * @retval BSP AUDIO status
+
+ */
+uint8_t BSP_AUDIO_IN_DeInit(void)
+{
+ /* De-initializes the Digital Filter for Sigma-Delta Modulators interface */
+ if (AUDIO_DFSDMx_DeInit() != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Reset the audio input context */
+ memset(&hAudioIn, 0, sizeof(hAudioIn));
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Starts audio recording.
+ * @param pbuf: Main buffer pointer for the recorded data storing
+ * @param size: Current size of the recorded buffer
+ * @note The Right channel is start at first with synchro on start of Left channel
+ * @retval BSP AUDIO status
+ */
+uint8_t BSP_AUDIO_IN_Record(uint16_t* pbuf, uint32_t size)
+{
+ hAudioIn.pRecBuf = pbuf;
+ hAudioIn.RecSize = size;
+
+ /* Allocate hAudioIn.LeftRecBuff buffer */
+#if defined(BSP_AUDIO_USE_RTOS)
+ hAudioIn.LeftRecBuff = (int32_t *)k_malloc(size * sizeof(int32_t));
+#else
+ hAudioIn.LeftRecBuff = (int32_t *)malloc(size * sizeof(int32_t));
+#endif
+ if(hAudioIn.LeftRecBuff == NULL)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Call the Media layer start function for left channel */
+ if(HAL_DFSDM_FilterRegularStart_DMA(&BSP_AUDIO_hDfsdmLeftFilter,
+ (int32_t*)hAudioIn.LeftRecBuff,
+ (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR)) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Updates the audio frequency.
+ * @param AudioFreq: Audio frequency used to record the audio stream.
+ * @note This API should be called after the BSP_AUDIO_IN_Init() to adjust the
+ * audio frequency.
+ * @retval BSP AUDIO status
+ */
+uint8_t BSP_AUDIO_IN_SetFrequency(uint32_t AudioFreq)
+{
+ /* Configure the SAI PLL according to the requested audio frequency */
+ if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* De-initializes the Digital Filter for Sigma-Delta Modulators interface */
+ if(AUDIO_DFSDMx_DeInit() != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Initializes the Digital Filter for Sigma-Delta Modulators interface */
+ if(AUDIO_DFSDMx_Init(AudioFreq) != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Regular conversion complete callback.
+ * @note In interrupt mode, user has to read conversion value in this function
+ using HAL_DFSDM_FilterGetRegularValue.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ uint32_t index;
+ uint32_t recbufsize = (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR);
+
+ for(index = (recbufsize/2); index < recbufsize; index++)
+ {
+ hAudioIn.pRecBuf[index] = (uint16_t)(SaturaLH((hAudioIn.LeftRecBuff[index] >> 8), -32760, 32760));
+ }
+
+ /* Invoke the registered 'TransferComplete' function (if any) */
+ if (hAudioIn.CbTransferComplete != (Audio_CallbackTypeDef)NULL)
+ {
+ hAudioIn.CbTransferComplete();
+ }
+}
+
+/**
+ * @brief Half regular conversion complete callback.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ uint32_t index;
+ uint32_t recbufsize = (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR);
+
+
+ for(index = 0; index < (recbufsize/2); index++)
+ {
+ hAudioIn.pRecBuf[index] = (uint16_t)(SaturaLH((hAudioIn.LeftRecBuff[index] >> 8), -32760, 32760));
+ }
+
+ /* Invoke the registered 'HalfTransfer' callback function (if any) */
+ if (hAudioIn.CbHalfTransfer != (Audio_CallbackTypeDef)NULL)
+ {
+ hAudioIn.CbHalfTransfer();
+ }
+}
+
+/**
+ * @brief Error callback.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Invoke the registered 'ErrorCallback' callback function (if any) */
+ if (hAudioIn.CbError != (Audio_CallbackTypeDef)NULL)
+ {
+ hAudioIn.CbError();
+ }
+}
+
+/**
+ * @brief Stops audio recording.
+ * @retval BSP AUDIO status
+ */
+uint8_t BSP_AUDIO_IN_Stop(void)
+{
+ /* Call the Media layer stop function for left channel */
+ if(HAL_DFSDM_FilterRegularStop_DMA(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK )
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Free hAudioIn.LeftRecBuff buffer */
+#if defined(BSP_AUDIO_USE_RTOS)
+ k_free((void *)hAudioIn.LeftRecBuff);
+#else
+ free((void *)hAudioIn.LeftRecBuff);
+#endif
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Pauses the audio file stream.
+ * @retval BSP AUDIO status
+ */
+uint8_t BSP_AUDIO_IN_Pause(void)
+{
+ /* Call the Media layer stop function */
+ if(HAL_DFSDM_FilterRegularStop_DMA(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Resumes the audio file stream.
+ * @retval BSP AUDIO status
+ */
+uint8_t BSP_AUDIO_IN_Resume(void)
+{
+ /* Call the Media layer start function for left channel */
+ if(HAL_DFSDM_FilterRegularStart_DMA(&BSP_AUDIO_hDfsdmLeftFilter,
+ (int32_t*)hAudioIn.LeftRecBuff,
+ (hAudioIn.RecSize/DEFAULT_AUDIO_IN_CHANNEL_NBR)) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief register user callback functions
+ * @param ErrorCallback: pointer to the error callback function
+ * @param HalfTransferCallback: pointer to the half transfer callback function
+ * @param TransferCompleteCallback: pointer to the transfer complete callback function
+ * @retval None
+ */
+void BSP_AUDIO_IN_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
+ Audio_CallbackTypeDef HalfTransferCallback,
+ Audio_CallbackTypeDef TransferCompleteCallback)
+{
+ hAudioIn.CbError = ErrorCallback;
+ hAudioIn.CbHalfTransfer = HalfTransferCallback;
+ hAudioIn.CbTransferComplete = TransferCompleteCallback;
+}
+/**
+ * @}
+ */
+
+/* private functions --------------------------------------------------------*/
+/** @addtogroup STM32L476G_NUCLEO_AUDIO_Private_Functions
+ * @{
+ */
+/**
+ * @brief Initializes the Audio Codec audio interface (SAI).
+ * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
+ * @note The default SlotActive configuration is set to CODEC_AUDIOFRAME_SLOT_0123
+ * and user can update this configuration using
+ * @retval BSP AUDIO status
+ */
+//static uint8_t AUDIO_SAIx_Init(uint32_t AudioFreq)
+//{
+// /* Disable SAI peripheral to allow access to SAI internal registers */
+// __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
+//
+// /* Initialize the BSP_AUDIO_hSai Instance parameter */
+// BSP_AUDIO_hSai.Instance = AUDIO_SAIx;
+//
+// /* Configure SAI_Block_x
+// LSBFirst: Disabled
+// DataSize: 16 */
+// BSP_AUDIO_hSai.Init.AudioMode = SAI_MODEMASTER_TX;
+// BSP_AUDIO_hSai.Init.Synchro = SAI_ASYNCHRONOUS;
+// BSP_AUDIO_hSai.Init.SynchroExt = SAI_SYNCEXT_DISABLE;
+// BSP_AUDIO_hSai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLE;
+// BSP_AUDIO_hSai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLE;
+// BSP_AUDIO_hSai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
+// BSP_AUDIO_hSai.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_MCKDIV;
+// BSP_AUDIO_hSai.Init.Mckdiv = SAIClockDivider(AudioFreq);
+// BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_STEREOMODE;
+// BSP_AUDIO_hSai.Init.CompandingMode = SAI_NOCOMPANDING;
+// BSP_AUDIO_hSai.Init.TriState = SAI_OUTPUT_NOTRELEASED;
+// BSP_AUDIO_hSai.Init.Protocol = SAI_FREE_PROTOCOL;
+// BSP_AUDIO_hSai.Init.DataSize = SAI_DATASIZE_16;
+// BSP_AUDIO_hSai.Init.FirstBit = SAI_FIRSTBIT_MSB;
+// BSP_AUDIO_hSai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+//
+// /* Configure SAI_Block_x Frame
+// Frame Length: 32
+// Frame active Length: 16
+// FS Definition: Start frame + Channel Side identification
+// FS Polarity: FS active Low
+// FS Offset: FS asserted one bit before the first bit of slot 0 */
+// BSP_AUDIO_hSai.FrameInit.FrameLength = 32;
+// BSP_AUDIO_hSai.FrameInit.ActiveFrameLength = 16;
+// BSP_AUDIO_hSai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
+// BSP_AUDIO_hSai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+// BSP_AUDIO_hSai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+//
+// /* Configure SAI Block_x Slot
+// Slot First Bit Offset: 0
+// Slot Size : 16
+// Slot Number: 2
+// Slot Active: Slots 0 and 1 actives */
+// BSP_AUDIO_hSai.SlotInit.FirstBitOffset = 0;
+// BSP_AUDIO_hSai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
+// BSP_AUDIO_hSai.SlotInit.SlotNumber = 2;
+// BSP_AUDIO_hSai.SlotInit.SlotActive = SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1;
+//
+// /* Initializes the SAI peripheral*/
+// if (HAL_SAI_Init(&BSP_AUDIO_hSai) != HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Enable SAI peripheral to generate MCLK */
+// __HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
+//
+// return AUDIO_OK;
+//
+//}
+
+/**
+ * @brief De-initializes the Audio Codec audio interface (SAI).
+ * @retval BSP AUDIO status
+ */
+//static uint8_t AUDIO_SAIx_DeInit(void)
+//{
+// /* Disable the SAI audio block */
+// __HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
+//
+// /* De-initializes the SAI peripheral */
+// if (HAL_SAI_DeInit(&BSP_AUDIO_hSai) != HAL_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// /* Disable SAIx PLL */
+// if (AUDIO_SAIx_PLL_DISABLE() != AUDIO_OK)
+// {
+// return AUDIO_ERROR;
+// }
+//
+// return AUDIO_OK;
+//}
+
+/**
+ * @brief SAI MSP Init
+ * @param hsai : pointer to a SAI_HandleTypeDef structure
+ * @retval None
+ */
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* Enable SAI clock */
+ AUDIO_SAIx_CLK_ENABLE();
+
+ /* Enable GPIO clock */
+ AUDIO_SAIx_MCK_SCK_SD_FS_ENABLE();
+
+ /* CODEC_SAI pins configuration: FS, SCK, MCK and SD pins ------------------*/
+ GPIO_InitStruct.Pin = AUDIO_SAIx_FS_PIN | AUDIO_SAIx_SCK_PIN | AUDIO_SAIx_SD_PIN | AUDIO_SAIx_MCK_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = AUDIO_SAIx_MCK_SCK_SD_FS_AF;
+ HAL_GPIO_Init(AUDIO_SAIx_MCK_SCK_SD_FS_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Enable the DMA clock */
+ AUDIO_SAIx_DMAx_CLK_ENABLE();
+
+ if(hsai->Instance == AUDIO_SAIx)
+ {
+ /* Configure the hDmaSai handle parameters */
+ hDmaSai.Init.Request = DMA_REQUEST_1;
+ hDmaSai.Init.Direction = DMA_MEMORY_TO_PERIPH;
+ hDmaSai.Init.PeriphInc = DMA_PINC_DISABLE;
+ hDmaSai.Init.MemInc = DMA_MINC_ENABLE;
+ hDmaSai.Init.PeriphDataAlignment = AUDIO_SAIx_DMAx_PERIPH_DATA_SIZE;
+ hDmaSai.Init.MemDataAlignment = AUDIO_SAIx_DMAx_MEM_DATA_SIZE;
+ hDmaSai.Init.Mode = DMA_NORMAL;
+ hDmaSai.Init.Priority = DMA_PRIORITY_HIGH;
+
+ hDmaSai.Instance = AUDIO_SAIx_DMAx_CHANNEL;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hsai, hdmatx, hDmaSai);
+
+ /* Deinitialize the Stream for new transfer */
+ HAL_DMA_DeInit(&hDmaSai);
+
+ /* Configure the DMA Stream */
+ HAL_DMA_Init(&hDmaSai);
+ }
+
+ /* SAI DMA IRQ Channel configuration */
+ HAL_NVIC_SetPriority(AUDIO_SAIx_DMAx_IRQ, AUDIO_OUT_IRQ_PREPRIO, 0);
+ HAL_NVIC_EnableIRQ(AUDIO_SAIx_DMAx_IRQ);
+}
+
+/**
+ * @brief SAI MSP De-init
+ * @param hsai : pointer to a SAI_HandleTypeDef structure
+ * @retval None
+ */
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
+{
+ /* Disable SAI DMA Channel IRQ */
+ HAL_NVIC_DisableIRQ(AUDIO_SAIx_DMAx_IRQ);
+
+ /* Reset the DMA Stream configuration*/
+ HAL_DMA_DeInit(&hDmaSai);
+
+ /* Disable the DMA clock */
+ AUDIO_SAIx_DMAx_CLK_DISABLE();
+
+ /* De-initialize FS, SCK, MCK and SD pins*/
+ HAL_GPIO_DeInit(AUDIO_SAIx_MCK_SCK_SD_FS_GPIO_PORT,
+ AUDIO_SAIx_FS_PIN | AUDIO_SAIx_SCK_PIN | AUDIO_SAIx_SD_PIN | AUDIO_SAIx_MCK_PIN);
+
+ /* Disable GPIO clock */
+ AUDIO_SAIx_MCK_SCK_SD_FS_DISABLE();
+
+ /* Disable SAI clock */
+ AUDIO_SAIx_CLK_DISABLE();
+}
+
+/**
+ * @brief Resets the audio codec. It restores the default configuration of the
+ * codec (this function shall be called before initializing the codec).
+ * @retval None
+ */
+//static void AUDIO_CODEC_Reset(void)
+//{
+// /* Initialize the audio driver structure */
+// hAudioOut.AudioDrv = &cs43l22_drv;
+//
+// hAudioOut.AudioDrv->Reset(AUDIO_I2C_ADDRESS);
+//}
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L476G_NUCLEO_AUDIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the Digital Filter for Sigma-Delta Modulators interface (DFSDM).
+ * @param AudioFreq: Audio frequency to be used to set correctly the DFSDM peripheral.
+ * @retval BSP AUDIO status
+ */
+static uint8_t AUDIO_DFSDMx_Init(uint32_t AudioFreq)
+{
+ /*####CHANNEL 2####*/
+ hAudioIn.hDfsdmLeftChannel.Init.OutputClock.Activation = ENABLE;
+ hAudioIn.hDfsdmLeftChannel.Init.OutputClock.Selection = DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO;
+ /* Set the DFSDM clock OUT audio frequency configuration */
+ hAudioIn.hDfsdmLeftChannel.Init.OutputClock.Divider = DFSDMClockDivider(AudioFreq);
+ hAudioIn.hDfsdmLeftChannel.Init.Input.Multiplexer = DFSDM_CHANNEL_EXTERNAL_INPUTS;
+ hAudioIn.hDfsdmLeftChannel.Init.Input.DataPacking = DFSDM_CHANNEL_STANDARD_MODE;
+ hAudioIn.hDfsdmLeftChannel.Init.Input.Pins = DFSDM_CHANNEL_SAME_CHANNEL_PINS;
+ /* Request to sample stable data for LEFT micro on Rising edge */
+ hAudioIn.hDfsdmLeftChannel.Init.SerialInterface.Type = DFSDM_CHANNEL_SPI_RISING;
+ hAudioIn.hDfsdmLeftChannel.Init.SerialInterface.SpiClock = DFSDM_CHANNEL_SPI_CLOCK_INTERNAL;
+ hAudioIn.hDfsdmLeftChannel.Init.Awd.FilterOrder = DFSDM_CHANNEL_SINC1_ORDER;
+ hAudioIn.hDfsdmLeftChannel.Init.Awd.Oversampling = 10;
+ hAudioIn.hDfsdmLeftChannel.Init.Offset = 0;
+ hAudioIn.hDfsdmLeftChannel.Init.RightBitShift = DFSDMRightBitShift(AudioFreq);
+
+ hAudioIn.hDfsdmLeftChannel.Instance = DFSDM_Channel2;
+
+ /* Init the DFSDM Channel */
+ if (HAL_DFSDM_ChannelInit(&hAudioIn.hDfsdmLeftChannel) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /*####FILTER 0####*/
+ BSP_AUDIO_hDfsdmLeftFilter.Init.RegularParam.Trigger = DFSDM_FILTER_SW_TRIGGER;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.RegularParam.FastMode = ENABLE;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.RegularParam.DmaMode = ENABLE;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.Trigger = DFSDM_FILTER_SW_TRIGGER;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.ScanMode = DISABLE;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.DmaMode = DISABLE;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.ExtTrigger = DFSDM_FILTER_EXT_TRIG_TIM8_TRGO;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.InjectedParam.ExtTriggerEdge = DFSDM_FILTER_EXT_TRIG_BOTH_EDGES;
+ BSP_AUDIO_hDfsdmLeftFilter.Init.FilterParam.SincOrder = DFSDMFilterOrder(AudioFreq);
+ /* Set the DFSDM Filters Oversampling to have correct sample rate */
+ BSP_AUDIO_hDfsdmLeftFilter.Init.FilterParam.Oversampling = DFSDMOverSampling(AudioFreq);
+ BSP_AUDIO_hDfsdmLeftFilter.Init.FilterParam.IntOversampling = 1;
+
+ BSP_AUDIO_hDfsdmLeftFilter.Instance = AUDIO_DFSDMx_LEFT_FILTER;
+
+ /* Init the DFSDM Filter */
+ if (HAL_DFSDM_FilterInit(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Configure regular channel */
+ if (HAL_DFSDM_FilterConfigRegChannel(&BSP_AUDIO_hDfsdmLeftFilter,
+ DFSDM_CHANNEL_2,
+ DFSDM_CONTINUOUS_CONV_ON) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief De-initializes the Digital Filter for Sigma-Delta Modulators interface (DFSDM).
+ * @retval BSP AUDIO status
+ */
+static uint8_t AUDIO_DFSDMx_DeInit(void)
+{
+ /* De-initializes the DFSDM filters to allow access to DFSDM internal registers */
+ if (HAL_DFSDM_FilterDeInit(&BSP_AUDIO_hDfsdmLeftFilter) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* De-initializes the DFSDM channels to allow access to DFSDM internal registers */
+ if (HAL_DFSDM_ChannelDeInit(&hAudioIn.hDfsdmLeftChannel) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* Disable DFSDM clock */
+ AUDIO_DFSDMx_CLK_DISABLE();
+
+ /* Disable SAIx PLL */
+ if (AUDIO_SAIx_PLL_DISABLE() != AUDIO_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ /* DFSDM reset */
+ __HAL_RCC_DFSDM_FORCE_RESET();
+ __HAL_RCC_DFSDM_RELEASE_RESET();
+
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Initializes the DFSDM channel MSP.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval None
+ */
+void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* Enable DFSDM clock */
+ AUDIO_DFSDMx_CLK_ENABLE();
+
+ /* Enable GPIO clock */
+ AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_ENABLE();
+
+ /* DFSDM pins configuration: DFSDM_CKOUT, DMIC_DATIN pins ------------------*/
+ GPIO_InitStruct.Pin = AUDIO_DFSDMx_CKOUT_PIN | AUDIO_DFSDMx_DMIC_DATIN_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = AUDIO_DFSDMx_CKOUT_DMIC_DATIN_AF;
+ HAL_GPIO_Init(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, &GPIO_InitStruct);
+}
+
+/**
+ * @brief De-initializes the DFSDM channel MSP.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval None
+ */
+void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* Enable GPIO clock */
+ AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_ENABLE();
+
+ /* DFSDM pins configuration: DFSDM_CKOUT */
+ GPIO_InitStruct.Pin = AUDIO_DFSDMx_CKOUT_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, &GPIO_InitStruct);
+ HAL_GPIO_WritePin(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, AUDIO_DFSDMx_CKOUT_PIN, GPIO_PIN_RESET);
+
+
+ /* De-initialize DMIC_DATIN pin */
+ HAL_GPIO_DeInit(AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT, AUDIO_DFSDMx_DMIC_DATIN_PIN);
+}
+
+/**
+ * @brief Initializes the DFSDM filter MSP.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Enable DFSDM clock */
+ AUDIO_DFSDMx_CLK_ENABLE();
+
+ /* Enable the DMA clock */
+ AUDIO_DFSDMx_DMAx_CLK_ENABLE();
+
+ /* Configure the hAudioIn.hDmaDfsdmLeft handle parameters */
+ hAudioIn.hDmaDfsdmLeft.Init.Request = DMA_REQUEST_0;
+ hAudioIn.hDmaDfsdmLeft.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hAudioIn.hDmaDfsdmLeft.Init.PeriphInc = DMA_PINC_DISABLE;
+ hAudioIn.hDmaDfsdmLeft.Init.MemInc = DMA_MINC_ENABLE;
+ hAudioIn.hDmaDfsdmLeft.Init.PeriphDataAlignment = AUDIO_DFSDMx_DMAx_PERIPH_DATA_SIZE;
+ hAudioIn.hDmaDfsdmLeft.Init.MemDataAlignment = AUDIO_DFSDMx_DMAx_MEM_DATA_SIZE;
+ hAudioIn.hDmaDfsdmLeft.Init.Mode = DMA_CIRCULAR;
+ hAudioIn.hDmaDfsdmLeft.Init.Priority = DMA_PRIORITY_HIGH;
+
+ hAudioIn.hDmaDfsdmLeft.Instance = AUDIO_DFSDMx_DMAx_LEFT_CHANNEL;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hdfsdm_filter, hdmaReg, hAudioIn.hDmaDfsdmLeft);
+
+ /* Reset DMA handle state */
+ __HAL_DMA_RESET_HANDLE_STATE(&hAudioIn.hDmaDfsdmLeft);
+
+ /* Configure the DMA Channel */
+ HAL_DMA_Init(&hAudioIn.hDmaDfsdmLeft);
+
+ /* DMA IRQ Channel configuration */
+ HAL_NVIC_SetPriority(AUDIO_DFSDMx_DMAx_LEFT_IRQ, AUDIO_OUT_IRQ_PREPRIO, 0);
+ HAL_NVIC_EnableIRQ(AUDIO_DFSDMx_DMAx_LEFT_IRQ);
+ }
+
+ /**
+ * @brief De-initializes the DFSDM filter MSP.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Disable DMA Channel IRQ */
+ HAL_NVIC_DisableIRQ(AUDIO_DFSDMx_DMAx_LEFT_IRQ);
+
+ /* De-initialize the DMA Channel */
+ HAL_DMA_DeInit(&hAudioIn.hDmaDfsdmLeft);
+
+ /* Disable the DMA clock */
+ AUDIO_DFSDMx_DMAx_CLK_DISABLE();
+}
+
+/**
+ * @brief Configures the SAI PLL clock according to the required audio frequency.
+ * @param Frequency: Audio frequency.
+ * @retval BSP AUDIO status
+ * @note The SAI PLL input clock must be configured in the user application.
+ * The SAI PLL configuration done within this function assumes that
+ * the SAI PLL input clock runs at 8 MHz.
+ */
+static uint8_t AUDIO_SAIPLLConfig(uint32_t Frequency)
+{
+ RCC_PeriphCLKInitTypeDef RCC_ExCLKInitStruct;
+
+ /* Retreive actual RCC configuration */
+ HAL_RCCEx_GetPeriphCLKConfig(&RCC_ExCLKInitStruct);
+
+ if ( (Frequency == AUDIO_FREQUENCY_11K)
+ || (Frequency == AUDIO_FREQUENCY_22K)
+ || (Frequency == AUDIO_FREQUENCY_44K) )
+ {
+ /* Configure PLLSAI prescalers */
+ /* SAI clock config
+ PLLSAI1_VCO= 8 Mhz * PLLSAI1N = 8 * 24 = VCO_192M
+ SAI_CK_x = PLLSAI1_VCO/PLLSAI1P = 192/17 = 11.294 Mhz */
+ RCC_ExCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI1;
+ RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1N = 24;
+ RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1P = 17;
+ RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_SAI1CLK;
+ RCC_ExCLKInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLLSAI1;
+ }
+ else /* AUDIO_FREQUENCY_8K, AUDIO_FREQUENCY_16K, AUDIO_FREQUENCY_48K, AUDIO_FREQUENCY_96K */
+ {
+ /* SAI clock config
+ PLLSAI1_VCO= 8 Mhz * PLLSAI1N = 8 * 43 = VCO_344M
+ SAI_CK_x = PLLSAI1_VCO/PLLSAI1P = 344/7 = 49.142 Mhz */
+ RCC_ExCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI1;
+ RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1N = 43;
+ RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1P = 7;
+ RCC_ExCLKInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_SAI1CLK;
+ RCC_ExCLKInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLLSAI1;
+ }
+
+ if (HAL_RCCEx_PeriphCLKConfig(&RCC_ExCLKInitStruct) != HAL_OK)
+ {
+ return AUDIO_ERROR;
+ }
+
+ return AUDIO_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 652cb54276d0 -r f6afbd3fc47a stm32l4xx_nucleo_audio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32l4xx_nucleo_audio.h Sat Dec 05 16:17:25 2015 +0000
@@ -0,0 +1,279 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_nucleo_audio.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 16-September-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32l4xx_nucleo_audio.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L476G_NUCLEO_AUDIO_H
+#define __STM32L476G_NUCLEO_AUDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(BSP_AUDIO_USE_RTOS)
+#include "k_mem.h"
+#else
+#include <stdlib.h>
+#endif
+/* Include audio component Driver */
+//#include "cs43l22.h"
+#include "stm32l4xx_nucleo.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32L476G_NUCLEO
+ * @{
+ */
+
+/** @addtogroup STM32L476G_NUCLEO_AUDIO
+ * @{
+ */
+
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Exported_Types Exported Types
+ * @{
+ */
+typedef void (*Audio_CallbackTypeDef)(void);
+
+/**
+ * @}
+ */
+
+/* AUDIO FREQUENCY */
+#define AUDIO_FREQUENCY_192K ((uint32_t)192000)
+#define AUDIO_FREQUENCY_96K ((uint32_t)96000)
+#define AUDIO_FREQUENCY_48K ((uint32_t)48000)
+#define AUDIO_FREQUENCY_44K ((uint32_t)44100)
+#define AUDIO_FREQUENCY_32K ((uint32_t)32000)
+#define AUDIO_FREQUENCY_22K ((uint32_t)22050)
+#define AUDIO_FREQUENCY_16K ((uint32_t)16000)
+#define AUDIO_FREQUENCY_11K ((uint32_t)11025)
+#define AUDIO_FREQUENCY_8K ((uint32_t)8000)
+
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Exported_Constants Exported Constants
+ * @{
+ */
+/** @defgroup BSP_Audio_Out_Option BSP Audio Out Option
+ * @{
+ */
+#define BSP_AUDIO_OUT_CIRCULARMODE ((uint32_t)0x00000001) /* BUFFER CIRCULAR MODE */
+#define BSP_AUDIO_OUT_NORMALMODE ((uint32_t)0x00000002) /* BUFFER NORMAL MODE */
+#define BSP_AUDIO_OUT_STEREOMODE ((uint32_t)0x00000004) /* STEREO MODE */
+#define BSP_AUDIO_OUT_MONOMODE ((uint32_t)0x00000008) /* MONO MODE */
+/**
+ * @}
+ */
+
+/** @defgroup BSP_Audio_Sample_Rate BSP Audio Sample Rate
+ * @{
+ */
+#define BSP_AUDIO_FREQUENCY_96K SAI_AUDIO_FREQUENCY_96K
+#define BSP_AUDIO_FREQUENCY_48K SAI_AUDIO_FREQUENCY_48K
+#define BSP_AUDIO_FREQUENCY_44K SAI_AUDIO_FREQUENCY_44K
+#define BSP_AUDIO_FREQUENCY_32K SAI_AUDIO_FREQUENCY_32K
+#define BSP_AUDIO_FREQUENCY_22K SAI_AUDIO_FREQUENCY_22K
+#define BSP_AUDIO_FREQUENCY_16K SAI_AUDIO_FREQUENCY_16K
+#define BSP_AUDIO_FREQUENCY_11K SAI_AUDIO_FREQUENCY_11K
+#define BSP_AUDIO_FREQUENCY_8K SAI_AUDIO_FREQUENCY_8K
+/**
+ * @}
+ */
+/*------------------------------------------------------------------------------
+ USER SAI defines parameters
+ -----------------------------------------------------------------------------*/
+/* SAI peripheral configuration defines */
+#define AUDIO_SAIx SAI1_Block_A
+#define AUDIO_SAIx_CLK_ENABLE() __HAL_RCC_SAI1_CLK_ENABLE()
+#define AUDIO_SAIx_CLK_DISABLE() __HAL_RCC_SAI1_CLK_DISABLE()
+#define AUDIO_SAIx_MCK_SCK_SD_FS_AF GPIO_AF13_SAI1
+
+#define AUDIO_SAIx_MCK_SCK_SD_FS_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+#define AUDIO_SAIx_MCK_SCK_SD_FS_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
+#define AUDIO_SAIx_FS_PIN GPIO_PIN_4
+#define AUDIO_SAIx_SCK_PIN GPIO_PIN_5
+#define AUDIO_SAIx_SD_PIN GPIO_PIN_6
+#define AUDIO_SAIx_MCK_PIN GPIO_PIN_2
+#define AUDIO_SAIx_MCK_SCK_SD_FS_GPIO_PORT GPIOE
+
+/* SAI DMA Channel definitions */
+#define AUDIO_SAIx_DMAx_CLK_ENABLE() __HAL_RCC_DMA2_CLK_ENABLE()
+#define AUDIO_SAIx_DMAx_CLK_DISABLE() __HAL_RCC_DMA2_CLK_DISABLE()
+#define AUDIO_SAIx_DMAx_CHANNEL DMA2_Channel1
+#define AUDIO_SAIx_DMAx_IRQ DMA2_Channel1_IRQn
+#define AUDIO_SAIx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD
+#define AUDIO_SAIx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD
+#define DMA_MAX_SZE (uint32_t)0xFFFF
+
+#define AUDIO_SAIx_DMAx_IRQHandler DMA2_Channel1_IRQHandler
+
+/* Select the interrupt preemption priority for the DMA interrupt */
+#define AUDIO_OUT_IRQ_PREPRIO 5 /* Select the preemption priority level(0 is the highest) */
+
+/* Disable SAIx PLL */
+#define AUDIO_SAIx_PLL_DISABLE() HAL_RCCEx_DisablePLLSAI1()
+
+/*------------------------------------------------------------------------------
+ AUDIO IN CONFIGURATION
+------------------------------------------------------------------------------*/
+/* DFSDM Configuration defines */
+#define AUDIO_DFSDMx_LEFT_CHANNEL DFSDM_Channel2
+#define AUDIO_DFSDMx_LEFT_FILTER DFSDM_Filter0
+#define AUDIO_DFSDMx_CLK_ENABLE() __HAL_RCC_DFSDM_CLK_ENABLE()
+#define AUDIO_DFSDMx_CLK_DISABLE() __HAL_RCC_DFSDM_CLK_DISABLE()
+#define AUDIO_DFSDMx_CKOUT_PIN GPIO_PIN_9
+#define AUDIO_DFSDMx_DMIC_DATIN_PIN GPIO_PIN_7
+#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_PORT GPIOE
+#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
+#define AUDIO_DFSDMx_CKOUT_DMIC_DATIN_AF GPIO_AF6_DFSDM
+
+/* DFSDM DMA Right and Left channels definitions */
+#define AUDIO_DFSDMx_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
+#define AUDIO_DFSDMx_DMAx_CLK_DISABLE() __HAL_RCC_DMA1_CLK_DISABLE()
+#define AUDIO_DFSDMx_DMAx_LEFT_CHANNEL DMA1_Channel4
+#define AUDIO_DFSDMx_DMAx_LEFT_IRQ DMA1_Channel4_IRQn
+#define AUDIO_DFSDMx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_WORD
+#define AUDIO_DFSDMx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_WORD
+
+#define AUDIO_DFSDM_DMAx_LEFT_IRQHandler DMA1_Channel4_IRQHandler
+
+/* Select the interrupt preemption priority and subpriority for the IT/DMA interrupt */
+#define AUDIO_IN_IRQ_PREPRIO 6 /* Select the preemption priority level(0 is the highest) */
+
+/*------------------------------------------------------------------------------
+ CONFIGURATION: Audio Driver Configuration parameters
+------------------------------------------------------------------------------*/
+
+#define AUDIODATA_SIZE 2 /* 16-bits audio data size */
+
+/* Audio status definition */
+#define AUDIO_OK 0
+#define AUDIO_ERROR 1
+#define AUDIO_TIMEOUT 2
+
+/* AudioFreq * DataSize (2 bytes) * NumChannels (Stereo: 2) */
+#define DEFAULT_AUDIO_IN_FREQ BSP_AUDIO_FREQUENCY_16K
+#define DEFAULT_AUDIO_IN_BIT_RESOLUTION 16
+#define DEFAULT_AUDIO_IN_CHANNEL_NBR 1 /* Mono = 1, Stereo = 2 */
+#define DEFAULT_AUDIO_IN_VOLUME 64
+
+/*------------------------------------------------------------------------------
+ OPTIONAL Configuration defines parameters
+------------------------------------------------------------------------------*/
+
+/* Delay for the Codec to be correctly reset */
+#define CODEC_RESET_DELAY 5
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Exported_Variables Exported Variables
+ * @{
+ */
+extern SAI_HandleTypeDef BSP_AUDIO_hSai;
+extern DFSDM_Filter_HandleTypeDef BSP_AUDIO_hDfsdmLeftFilter;
+
+ /**
+ * @}
+ */
+
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Exported_Macros Exported Macros
+ * @{
+ */
+#define DMA_MAX(_X_) (((_X_) <= DMA_MAX_SZE)? (_X_):DMA_MAX_SZE)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup STM32L476G_NUCLEO_AUDIO_Exported_Functions Exported Functions
+ * @{
+ */
+uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_OUT_DeInit(void);
+uint8_t BSP_AUDIO_OUT_Play(uint16_t* pData, uint32_t Size);
+uint8_t BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size);
+uint8_t BSP_AUDIO_OUT_Pause(void);
+uint8_t BSP_AUDIO_OUT_Resume(void);
+uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option);
+uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume);
+uint8_t BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq);
+void BSP_AUDIO_OUT_ChangeAudioConfig(uint32_t AudioOutOption);
+uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd);
+uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output);
+void BSP_AUDIO_OUT_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
+ Audio_CallbackTypeDef HalfTransferCallback,
+ Audio_CallbackTypeDef TransferCompleteCallback);
+
+uint8_t BSP_AUDIO_IN_Init(uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr);
+uint8_t BSP_AUDIO_IN_DeInit(void);
+uint8_t BSP_AUDIO_IN_Record(uint16_t *pData, uint32_t Size);
+uint8_t BSP_AUDIO_IN_SetFrequency(uint32_t AudioFreq);
+uint8_t BSP_AUDIO_IN_Stop(void);
+uint8_t BSP_AUDIO_IN_Pause(void);
+uint8_t BSP_AUDIO_IN_Resume(void);
+void BSP_AUDIO_IN_RegisterCallbacks(Audio_CallbackTypeDef ErrorCallback,
+ Audio_CallbackTypeDef HalfTransferCallback,
+ Audio_CallbackTypeDef TransferCompleteCallback);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L476G_NUCLEO_AUDIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+