Diff: sx1280-hal.cpp

Revision:

12:c4f110f3fe3e

Parent:

11:d60df50e108f

diff -r d60df50e108f -r c4f110f3fe3e sx1280-hal.cpp
--- a/sx1280-hal.cpp	Wed Jul 18 08:48:34 2018 +0000
+++ b/sx1280-hal.cpp	Thu Nov 08 10:08:44 2018 +0000
@@ -153,24 +153,6 @@
 {
     RadioUart->format( 9, SerialBase::Even, 1 ); // 8 data bits + 1 even parity bit + 1 stop bit
     RadioUart->baud( 115200 );
-
-    // By default the SX1280 UART is setup to handle bytes MSB first.
-    // In order to setup the radio to use the UART standard way we first send
-    // the equivalent of a WriteRegister with reversed bit order in order to
-    // change the endianness.
-    uint8_t regVal = 0;
-    RadioUart->putc( 0x98 );            // Reversed opcode for read register (0x19)
-    RadioUart->putc( 0x10 );            // Reversed MSB register address (0x08)
-    RadioUart->putc( 0x18 );            // Reversed LSB register address (0x18)
-    RadioUart->putc( 0x80 );            // Reversed value for reading only 1 byte (0x01)
-    regVal = RadioUart->getc( )& 0xF3;  // Read reversed value and mask it
-
-    RadioUart->putc( 0x18 );            // Reversed opcode for read register (0x18)
-    RadioUart->putc( 0x10 );            // Reversed MSB register address (0x08)
-    RadioUart->putc( 0x18 );            // Reversed LSB register address (0x18)
-    RadioUart->putc( 0x80 );            // Reversed value for writing only 1 byte (0x01)
-    RadioUart->putc( regVal );          // The new value of the register
-
     // After this point, the UART is running standard mode: 8 data bit, 1 even
     // parity bit, 1 stop bit, 115200 baud, LSB first
     wait_us( 10 );