pelion-example-disco-iot01 - Mbed OS and Pelion Device Management example over…

ST » Code » pelion-example-disco-iot01

Mbed OS and Pelion Device Management example over WIFI for DISCO_L475VG_IOT01 board

Dependencies: X_NUCLEO_COMMON ST_INTERFACES

DEPRECATED

This example application is not maintained and not recommended. It uses an old version of Mbed OS, Pelion DM and Arm toolchain. It doesn't work with Mbed Studio.

Please use: https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-pelion/

This example is known to work on the following platforms:

DISCO_L475E_IOT01A over WiFI and using onboard QSPI flash.

DISCO_L475E_IOT01A

Follow the Quick-Start instructions: https://cloud.mbed.com/quick-start

Example functionality

This example showcases the following device functionality:

Read onboard temperature and humidity sensors, and report them as Pelion LWM2M resources (see image below).
On user button click, increment Pelion LWM2M button resource.
Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.
Uses all onboard sensors and reports them as Pelion LWM2M resources.

/media/uploads/screamer/pelion_st_humidity_reading.png?v=2

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import https://os.mbed.com/teams/ST/code/pelion-example-disco-iot01

cd pelion-example-disco-iot01

2. Install the CLOUD_SDK_API_KEY

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command:

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.

4. Compile and program:

mbed compile -t <toolchain> -m DISCO_L475VG_IOT01A

(supported toolchains : GCC_ARM / ARM / IAR)

5. You can connect on a virtual terminal/COM port to the platform using:

mbed sterm -b 115200

This should give you an output similar to:

[BOOT] Mbed Bootloader
[BOOT] ARM: 00000000000000000000
[BOOT] OEM: 00000000000000000000
[BOOT] Layout: 0 80096F4
[BOOT] Active firmware integrity check:
[BOOT] SHA256: 0660E360D432225D5251461998FD8617B017098C5F1F90D5FB607BF8C27ED530
[BOOT] Version: 1553615309
[BOOT] Slot 0 is empty
[BOOT] Active firmware up-to-date
[BOOT] Application's start address: 0x8010400
[BOOT] Application's jump address: 0x8011041
[BOOT] Application's stack address: 0x20018000
[BOOT] Forwarding to application...

Starting Simple Pelion Device Management Client example
You can hold the user button during boot to format the storage and change the device identity.

Sensors configuration:
Invalid new address!
HTS221  humidity & temperature    = 0xBC
LPS22HB pressure & temperature    = 0xB1
LIS3MDL magnetometer              = 0x3D
LSM6DSL accelerometer & gyroscope = 0x6A

Connecting to the network using Wifi...
Connected to the network successfully. IP address: 192.168.1.3
Initializing Pelion Device Management Client...
Initialized Pelion Client. Registering...
Registered to Pelion Device Management. Endpoint Name: 0169********************001002d5

ADC temp:     23.0037 C,  vref:      0.3661 V
HTS221 temp:   28.700 C,  humidity:   31.90 %
LPS22HB temp:  29.600 C,  pressure: 1032.01 mbar
LIS3MDL mag:    0.217 x,  -0.284 y,  -0.053 z [gauss]
LSM6DSL acc:    0.005 x,  -0.014 y,   1.029 z [g]
LSM6DSL gyro:   0.910 x,  -0.910 y,   1.120 z [dps]
VL53L0X dist:    1855 mm

mbed_cloud_client_user_config.h@4:cf7342047b4d, 2018-07-06 (annotated)

Committer:: adustm
Date:: Fri Jul 06 11:44:19 2018 +0200
Revision:: 4:cf7342047b4d
Parent:: 1:e86b1cffc402

Update for public cloud client version

Who changed what in which revision?

User	Revision	Line number	New contents of line
adustm	1:e86b1cffc402	1	// ----------------------------------------------------------------------------
adustm	1:e86b1cffc402	2	// Copyright 2016-2017 ARM Ltd.
adustm	1:e86b1cffc402	3	//
adustm	1:e86b1cffc402	4	// SPDX-License-Identifier: Apache-2.0
adustm	1:e86b1cffc402	5	//
adustm	1:e86b1cffc402	6	// Licensed under the Apache License, Version 2.0 (the "License");
adustm	1:e86b1cffc402	7	// you may not use this file except in compliance with the License.
adustm	1:e86b1cffc402	8	// You may obtain a copy of the License at
adustm	1:e86b1cffc402	9	//
adustm	1:e86b1cffc402	10	// http://www.apache.org/licenses/LICENSE-2.0
adustm	1:e86b1cffc402	11	//
adustm	1:e86b1cffc402	12	// Unless required by applicable law or agreed to in writing, software
adustm	1:e86b1cffc402	13	// distributed under the License is distributed on an "AS IS" BASIS,
adustm	1:e86b1cffc402	14	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
adustm	1:e86b1cffc402	15	// See the License for the specific language governing permissions and
adustm	1:e86b1cffc402	16	// limitations under the License.
adustm	1:e86b1cffc402	17	// ----------------------------------------------------------------------------
adustm	1:e86b1cffc402	18
adustm	1:e86b1cffc402	19	// This file is a template and it's intented to be copied to the application
adustm	1:e86b1cffc402	20	// Enable this configuration
adustm	1:e86b1cffc402	21
adustm	1:e86b1cffc402	22	#ifndef MBED_CLOUD_CLIENT_USER_CONFIG_H
adustm	1:e86b1cffc402	23	#define MBED_CLOUD_CLIENT_USER_CONFIG_H
adustm	1:e86b1cffc402	24
adustm	4:cf7342047b4d	25	#ifdef MBED_CONF_APP_ENDPOINT_TYPE
adustm	4:cf7342047b4d	26	#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE MBED_CONF_APP_ENDPOINT_TYPE
adustm	4:cf7342047b4d	27	#else
adustm	1:e86b1cffc402	28	#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE "default"
adustm	4:cf7342047b4d	29	#endif
adustm	1:e86b1cffc402	30
adustm	1:e86b1cffc402	31	// Enable either TCP or UDP, but no both
adustm	1:e86b1cffc402	32	#define MBED_CLOUD_CLIENT_TRANSPORT_MODE_TCP
adustm	1:e86b1cffc402	33	// MBED_CLOUD_CLIENT_TRANSPORT_MODE_UDP
adustm	1:e86b1cffc402	34
adustm	1:e86b1cffc402	35	#define MBED_CLOUD_CLIENT_LIFETIME 3600
adustm	1:e86b1cffc402	36
adustm	1:e86b1cffc402	37	#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE
adustm	1:e86b1cffc402	38	#define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE 1024
adustm	1:e86b1cffc402	39
adustm	1:e86b1cffc402	40	// set flag to enable update support in mbed Cloud client
adustm	1:e86b1cffc402	41	#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE
adustm	1:e86b1cffc402	42
adustm	1:e86b1cffc402	43	// set download buffer size in bytes (min. 1024 bytes)
adustm	1:e86b1cffc402	44
adustm	1:e86b1cffc402	45	// Use larger buffers in Linux //
adustm	1:e86b1cffc402	46	#ifdef __linux__
adustm	1:e86b1cffc402	47	#define MBED_CLOUD_CLIENT_UPDATE_BUFFER (2 * 1024 * 1024)
adustm	1:e86b1cffc402	48	#else
adustm	1:e86b1cffc402	49	#define MBED_CLOUD_CLIENT_UPDATE_BUFFER 2048
adustm	1:e86b1cffc402	50	#endif
adustm	1:e86b1cffc402	51
adustm	1:e86b1cffc402	52	// Developer flags for Update feature
adustm	1:e86b1cffc402	53	#if MBED_CONF_APP_DEVELOPER_MODE == 1
adustm	1:e86b1cffc402	54	#define MBED_CLOUD_DEV_UPDATE_CERT
adustm	1:e86b1cffc402	55	#define MBED_CLOUD_DEV_UPDATE_ID
adustm	1:e86b1cffc402	56	#endif // MBED_CONF_APP_DEVELOPER_MODE
adustm	1:e86b1cffc402	57
adustm	1:e86b1cffc402	58	#endif // MBED_CLOUD_CLIENT_USER_CONFIG_H
adustm	1:e86b1cffc402	59