ST / Mbed OS mbed-os-example-client-Sensors_6LowPan

Mbed OS Device Connector client pushing environmental sensor data via 6LowPan.

Dependencies:   X_NUCLEO_IKS01A2

Fork of mbed-os-example-client-Sensors_6LowPan by Nicola Capovilla

The application is derived from the official mbedOS client example (link) and has been tested using a X-NUCLEO-IDS01A4 SubGHz 6LowPan connectivity board and a X-NUCLEO-IKS01A2 (default) or a X-NUCLEO-IKS01A1 motion and environmental sensors expansion board connected to a ST NUCLEO-F429ZI platform.
The following steps should be performed to make the application work:

  • Register and login into ARM mbed Connector.
  • Replace the default and empty security.h file with the one associated with your account and provided by the Connector (Security Credentials menu).
  • In order to use X-NUCLEO-IKS01A1 instead of default X-NUCLEO-IKS01A2 comment out the IKS01A2 macro definition in main.cpp file.
  • Choose NUCLEO-F429ZI as a target either from online compiler or from CLI, compile and flash.
  • Setup and connect a NUCLEO-F429ZI + X-NUCLEO-IDS01A4 6LowPan border router as explained here
  • Open a serial terminal (params 115200N1) and wait that the client is connected to the mbed Connector via the border router.
  • As soon as the client is connected it will start acquiring and pushing the environmental (pressure, temperature and humidity) data to the cloud.

Note: environmental data are expressed using IPSO representation based on OMA LWM2M standard.

Diff: mbed_app.json

Revision:
0:694e888fd1b5
diff -r 000000000000 -r 694e888fd1b5 mbed_app.json
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json	Thu Jan 25 18:00:04 2018 +0100
@@ -0,0 +1,26 @@
+{
+    "config": {
+        "network-interface":{
+            "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+            "value": "MESH_LOWPAN_ND"
+        },
+        "mesh_radio_type": {
+            "help": "options are ATMEL, MCR20, SPIRIT1",
+            "value": "SPIRIT1"
+        }
+    },
+    "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\""],
+    "target_overrides": {
+        "*": {
+            "spirit1.mac-address": "{0x51, 0xc0, 0x7a, 0xca, 0x90, 0x71, 0x77, 0xa1}",
+            "target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
+            "platform.stdio-baud-rate": 115200,
+            "platform.stdio-convert-newlines": true,
+            "mbed-mesh-api.6lowpan-nd-security-mode": "PSK",
+            "mbed-mesh-api.6lowpan-nd-channel-page": 2,
+            "mbed-mesh-api.6lowpan-nd-channel": 1,
+            "mbed-mesh-api.6lowpan-nd-channel-mask": "(1<<1)",
+            "mbed-trace.enable": 0
+        }
+    }
+}